Running Magnet 2.0 Surface - architectural.flosusa.com · Page 1 of 7 For more information contact...

Fixture Type

Job Name

Running Magnet 2.0 SurfaceHigh-tech LED lighting system for interior architecture

F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2

of 7

For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 04.12.2018

Surface Profile

Trimless extruded aluminum profile to be surface mounted on ceilings

Linear profiles available as feed profiles toconnect to a driver and intermediate profilesto fill in remaining lengths.

Each feed profile comes with two end caps.

Available lengths: 39.4”, 59”, and 78.7”

All linear profiles are field cuttable.

Corners available for continuous runs.

Track can be powered through corners.

Corners are not field cuttable.

Description

Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet isflexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined.Light elements snap in place and connect automatically though the magic of magnets.Extruded aluminum housings create a clean 1-3/8-inch slot and preconfigured cornerscomplete the system that can run up, around and across walls and ceilings. Finishes alignperfectly, always, because Running Magnet can be easily cut on site (except SuspensionUp&Down). Linear LED and accent fixtures, available in a variety of sizes, can be exchangedand repositioned quickly, without tools, with artistic results. The Running Magnet is perfectfor retail displays where frequent changes are typical and absolute performance is mandatory.

Lamps

Multi Spot: 10W, 4x210lm, 2700K, CRI 8010W, 4x210m, 3000K, CRI 80

Mini Glo-ball: 7W, 800lm, 2700K, CRI 807W, 880lm, 3000K, CRI 80

Mini Glo-Ball S:3.5W, 400lm, 2700K, CRI 803.5W, 440lm, 3000K, CRI 80

Find Me Suspension: 8W, 560lm, 2700K, CRI 908W, 600lm, 3000K, CRI 90

Spot Module:8W, 600lm, 3000K, CRI 908W, 550lm, 2700K, CRI 90

Light Strip, 11.8’’:7.5W, 460lm, 3000K, CRI 907.5W, 435lm, 2700K, CRI 90

Light Strip 23.6’’:15W, 920lm, 3000K, CRI 9015W, 870lm, 2700K, CRI 90

Light Strip 35.4’’:22.5W, 1380lm, 3000K, CRI 9022.5W, 1305lm, 2700K, CRI 90

Light Strip 47.2’’:30W, 1840lm, 3000K, CRI 9030W, 1740lm, 2700K, CRI 90

Spot 120:12.5W, 1060lm, 3000K, CRI9012.5W, 985lm, 2700K, CRI90

Construction

Extruded aluminum housing with integral DALI controllable track system.

Photometrics

For current IES files please visitarchitectural.flosusa.com

Electrical

24V electrical systemlimited to a maximumload of 4A and 100W per driver.

Spot and linear luminaires available withindividually addressable DALI circuitry,0-10V Dimming or built-in dimmer on eachfixture head.

EC to supply site cabling from driver to tracklocation and site UL listed enclosure.

Notes

Consult factory for other ceiling typesincluding accoustic tile ceilings and wood.

Listings: UL Listed, IP20 dry location only, Class 2, Meets California standards forcommercial interiors.

Warranty

2 years from date of sale.

UP & DOWNSUSPENSIONRECESSED SURFACE

Fixture Type

Job Name



of 7


Profiles

Corners

The extruded aluminum housing creates a clean 1-3/8” slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete thesystem. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, andintermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed until afte installation.

Horizontal corners available for 90° turns in the same plane, inside corner to transition from wall to ceiling or from wall to wall and external corners to transition from wall to wall surfaces or around soffits. Corners are prepared to feed a structure in both directions without the need of a feed profile.

Length Part Number FeedUnit Profile

Finish

06.1600

06.1601

06.1602

39.4’’ (1m)

59’’ (1.5m)

78.7 (2m)

06.1605

06.1606

06.1607

Part NumberIntermediate Profile

Inside CornerHorizontal Corner

06.161206.1610

3.9‘‘

[100

mm

]

1.4‘‘[35.0 mm]

1.6‘‘

CEILING LINE

[41 mm]

5.6‘‘

[142mm]

4.9‘‘

[125mm]

5.6‘‘

[142mm]

4.9‘‘[125mm]

5.9‘‘

[150mm]

5.9‘‘

[150mm]

14 = Black

40 = White

14 = Black

40 = White

14 = Black

40 = White

14 = Black

40 = White

14 = Black

40 = White

Luminaries

Light Strip Module HE Find Me SuspensionSpot 120Spot Module Multi Spot Mini Glo-Ball

• Linear Hight Efficency LED can berapidly exchanged and repositionedwithout tools. Light elements are quickto position and connect automatically with magnets.• Built-in dimming switch dims fixturewith allen key from 20-100%, DALI and0-10V.• Clear end caps included for continuouslook when installing end-to-end.

• Accent LED Spot modules can berapidly exchanged and repositionedwithout tools.• Light elements are quick to positionand connect automatically with magnets• Built-in dimming knob dims fixturefrom 20-100%, DALI and 0-10V• Standard beam spread is 14°• Additional interchangeable lensesavailable in 27° and 36°, and 10° x 42°elliptical beam spread

• Decorative modules canbe rapidly exchanged andrepositioned withouttools. Light elements arequick to position andconnect with magnets• Built-in dimming knoballows fixture to dim from20-100%, DALI and 0-10V

• Accent lighting LED module tobe installed in The Running Magnet 2.0 System• Built-in DC/DC electronic voltage converter.• Built-in dimming knob dims fixture from 39-100%, DALI and 0-10V• Standard beam spread are 24º and 33º• Honeycomb and cross baffle included

How to Specify ex. 06.1614.40.90

Fixture Type

Job Name



of 7


Optional Accessory

Drivers

Extra End Caps

LED Driver- 96W Optronic 24V Driver,no dimming wire configuration

Dimming Control Unit Box 24V-48V, 1-10V

Splice Box

LED96W24V-Non-Dim

08.0613.14

SP-24V-96W-Non-Dim

13‘‘

[347mm]

2.2‘‘[59mm]

1.7‘‘[46mm]

08.8887.14A

08.8887.40A

Fixture Type

Job Name



of 7


Light Strip Module HE

Spot Module

CCT CRI

90

90

90

90

3000

2700

3000

2700

3000

2700

3000

2700

440460

880920

13201380

17601840

435435

833870

12491305

16651740

7.5 105º

15 105º

22.5 105º

30 105º

03.7001.14.90

03.7000.14.90

03.7001.14.DD

03.7000.14.DD

03.7001.14.9V

03.7000.14.9V

03.7003.14.90

03.7002.14.90

03.7003.14.DD

03.7002.14.DD

03.7003.14.9V

03.7002.14.9V

03.7005.14.90

03.7004.14.90

03.7005.14.DD

03.7004.14.DD

03.7005.14.9V

03.7004.14.9V

03.7007.14.90

03.7006.14.90

03.7007.14.DD

03.7006.14.DD

03.7007.14.9V

03.7006.14.9V

11.8’’ (300mm)

23.6’’ (600mm)

35.4’’ (900mm)

47.2’’ (1200mm)

Delivered LumenInitial Lumen Watts BeamSpread

Part NumberDimmable on board

Light Strip Lenght Part Number DALIDimming

Part Number0-10V Dimming

6.7‘‘[170.2 mm]

1.97‘

‘

ø 1.34‘‘

[50

mm

]

[34 mm]

Linear High Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically withmagnets. Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V. Clear end caps included for continuous look when installing end-to-end.

Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets.Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V. Standard beam spread is 14°. Additional interchangeable lenses available in 27° and 36°, and10° x 42° elliptical beam spread.

90º

360º

Optional Accessories

08.8760.00

08.8761.00

08.8759.00

08.8427.14

Flood Lens Accessory 23°

Wide Flood Lens Accessory 33°

Elliptical Lens Accessory

Extra long snoot for added shielding in aluminum with black finish (does not protude from channel when tucked up into housing)

Initial Lumen

CRI CCT DeliveredLumen

418

404

600903000

550902700

8

550

14º

14º

03.6302.14A90 03.6302.14ADD 03.6302.14A9V

03.6303.14A90 03.6303.14ADD 03.6303.14A9V

Watts BeamSpread

Part Number Dimmable on board

Part Number DALI-Dimming

Photometric

30°

60°

90°

30°

60°

90°

6199 Cd/Klm

E(lx/Klm)D (m)

h(m) 21°

1

2

3

4

5

6199

1550

689

387

248

0.37

0.74

1.11

1.48

1.85

2.8

‘‘1.

3‘‘

[72

mm

][3

4 m

m]SEE TABLE

5.16‘‘[129 mm]

Part Number 0-10V Dimming

Fixture Type

Job Name



of 7


Multi Spot 4

Spot 120

Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage.

Optional Accessories

08.8760.00

08.8761.00

08.8759.00

Flood Lens Accessory 20°

Wide Flood Lens Accessory 30°

Elliptical Lens Accessory

CCT CRI

90

90

90

90

2700

2700

3000

3000

706985

430985

7311060

4441060

12.5 25º

12.5 33º

12.5 25º

12.5 33º

03.6285.14.90

03.6285.40.90

03.6285.14.DD

03.6285.40.DD

03.6285.14.9V

03.6285.40.9V

03.6284.14.DD

03.6284.40.DD

03.6284.14.9V

03.6284.40.9V

03.6286.14.DD

03.6286.40.DD

03.6286.14.9V

03.6286.40.9V

03.6287.14.DD

03.6287.40.DD

03.6287.14.9V

03.6287.40.9V

03.6284.14.90

03.6284.40.90

03.6286.14.90

03.6286.40.90

03.6287.14.90

03.6287.40.90

DeliveredLumen

Initial Lumen

Watts BeamSpread


Finish Part Number DALI-Dimming


30°

60°

90°

30°

60°

90°

6199 Cd/Klm

E(lx/Klm)D (m)

h(m) 21°

1

2

3

4

5

6199

1550

689

387

248

0.37

0.74

1.11

1.48

1.85

2.7‘‘

0.8

7‘‘

1.57‘‘

7.87‘‘

1.3‘‘

ø 1.8‘‘

4.8‘‘

5.1‘‘

[69

mm

]

[22m

m]

[40

mm

]

[200

mm

]

[33 mm]

[46 mm]

[121 mm]

[130 mm]

4.7‘‘[119 mm]

14 = Black

40 = White

14 = Black

40 = White

14 = Black

40 = White

14 = Black

40 = White

Initial Lumen

CRI CCT DeliveredLumen

674

630

4 X 210903000

4 X 210902700

10

10

11º

11º

03.6306.14.90 03.6306.14.DD 03.6306.14.9V

03.6305.14.90 03.6305.14.DD 03.6305.14.9V

Watts BeamSpread

Part Number Dimmable on board

Part Number DALI-Dimming

PhotometricPart Number 0-10V Dimming

Fixture Type

Job Name



of 7


Other Light Module

Mini Glo - Ball S

Mini Glo -Ball

Find Me Suspension

Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic ofmagnets. Built-in dimming knob allows fixture to dim from 20-100%.

CCT CRI

803000

2700

880 880

800 8007

03.6261.14B90

03.6260.14B90

03.6261.14.DD

03.6260.14.DD

03.6261.14.DD

03.6260.14.DD

Initial Lumen Initial Lumen Watts Part Number Built-in Dimming Part Number DALI-Dimming Part Number 0-10V Dimming

2.8‘‘

2.8‘‘

2.8‘‘

3.3‘‘

118‘‘

118‘‘

3.6‘‘

8.7‘‘

ø 4.3‘‘

ø 4.3‘‘

ø 1.3‘‘

[72 mm

]

[72 mm

]

[72 mm

]

[85 m

m]

[300

0 m

m]

MA

X.

[300

0 m

m]

MA

X.

[92 mm

]

[220 m

m]

[110 mm]

[110 mm]

[33 mm]

5.11‘‘[130 mm]

5.07‘‘[129 mm]

5.11‘‘[130 mm]

CCT

CCT

CRI

CRI

80

90

90

3000

2700

3000

3000

440 271

600 365

560 344

400 2593.5

8 14º

8 14º

03.6263.14B90

03.6262.14B90

03.6273.30C90

03.6273.14C90

03.6273.06C90

03.6272.30C90

03.6272.14C90

03.6272.06C90

03.6263.14.DD

03.6262.14.DD

03.6263.14.tbd

03.6262.14.tbd

03.6273.30CDD 03.6273.30C9V

03.6273.14CDD 03.6273.14C9V

03.6273.06CDD 03.6273.06C9V

03.6272.30CDD 03.6272.30C9V

03.6272.14CDD 03.6272.14C9V

03.6272.06CDD 03.6272.06C9V

Initial Lumen

Initial Lumen

DeliveredLumen

DeliveredLumen

Watts

Watts

Beam Spread

Beam Spread

Finish



Part NumberDALI-Dimming

Part NumberDALI-Dimming



Mini Glo - Ball S

Find Me Suspension

14 = Black

06 = Chrome

30 = White

14 = Black

06 = Chrome

30 = White

Fixture Type

Job Name



of 7


Visit FLOS Worldwide YouTube channel for installation videos

How to Specify

A. Select and position corners

1. Horizontal - Connect sections on flat surfaces (90º corner)2. Inside - Transition from wall to ceiling (inside corner)3. External - Turn outside corners for walls and soffits (270° corner)

B. Fill lengths between corners with Linear Housings

3’ or 6’ sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together.

C. Drivers

Quantity of drivers determined by total wattage or light elementsin section (approximately one every 10 feet). Maximum driver distance is 15’. Locate drivers nearby. DALI dimming hardwires into profile, bypasses driver.

D. Select Spot heads

Linear strips are available in five nominal lengths: 1’, 2’, 3’, 4’ and 5’. Individual units can be adjusted from 20-100% with on board switch, DALI and 0-10V

Running Magnet 2.0 Surface - architectural.flosusa.com · Page 1 of 7 For more information contact...

Documents

Transcript of Running Magnet 2.0 Surface - architectural.flosusa.com · Page 1 of 7 For more information contact...