RSX20L Specificationseaw.com/docs/1_Current_Products/RSX/Spec_Sheets/RSX208L... · EAW ACC WEATHER...
Transcript of RSX20L Specificationseaw.com/docs/1_Current_Products/RSX/Spec_Sheets/RSX208L... · EAW ACC WEATHER...
3-WAY SELF-POWERED LOUDSPEAKER 120° × 12° ConfigurationSubsystem Transducer Loading LF 1 x 8 in cone, 2 in voice coil Vented LF/MF 1 x 8 in cone, 2 in voice coil Vented HF 2 x 1 in exit, 1.4 in voice coil Horn-loaded compression drivers Operating Mode Amplifier Channels Signal Processing Tri-amp LF, LF/MF, HF DSP w/EAW Focusing™ and DynO™
Acoustical PerformanceOperating Range 70 Hz to 18 kHzNominal Beamwidth Horizontal 120° Vertical 12° Calculated Axial Output Limit (whole space SPL) Average Peak LF/MF/HF 122 dB 128 dB
Electrical PerformanceInput Type Electronically balanced Max Input Level 21dBu Impedance 20 kOhm (balanced) Wiring XLRF, Pin 1 chassis, pin 2 +, pin 3 - Separate loop-thru XLRM (for analog signal only)Input Selection Analog, DanteAmplifiers & Processing LF/MF/HF Type Modified Class D Maximum Output 3x 500W Driver Protection Integral DSP limiting AC Mains (nominal) Connector Neutrik PowerCon® Input 100 V to 240 V Frequency 50 Hz to 60 Hz Power Consumption Idle 26 W Peak Draw 250 WControls/Communication Connections 2x Neutrik® etherCON™, RJ-45 Protocols Ethernet/Dante Software EAWmosaic™ (available on the App Store) Indicators LCD Screen on amplifier panel for UI, Logo LED (User-definable behavior) User Controls Push-button Rotary Encoder
Weight 40.5 lbs/18.4 kg
Dimensions 9.8x27x13 in / 249x683x332 mm
Ordering DataDescription Part NumberEAW RSX208L BLACK 2047570-90Optional AccessoriesEAW FBX100 FLYBAR BLACK 2047169-00EAW ACC WEATHER SHIELD HORZ BLK 2047681EAW SBX100 STAND MOUNT BLACK 2047369EAW ACC ROADCASE RSX208L 2047368
Features• OptiLogic™ provides array self-detection via onboard infrared sensors
and accelerometers for near-instant optimization that cuts down on setup and tuning time.
• Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue.
• Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels.
• Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability.
Applications• House of Worship
• Theatres, Auditoria and Performing Arts Centers
• Live Music Clubs
• Corporate AV Houses
• Live Production/Regional Rental Houses
• Dry Hire
DescriptionDesigned to streamline setup and deliver maximum results in minimum time, RADIUS couples unique and intelligent features with EAW’s signature acoustical design to deliver solutions for rental firms and system integrators. The RADIUS articulated array features OptiLogic, providing automatic array self-detection and instant optimization including air loss compensation and more. EAWmosaic™ app provides total system optimization from anywhere in the venue, plus intuitive room design and prediction in a single, comprehensive application. With the proven sonic performance of EAW’s acoustic design and DSP mastery plus full Dante integration across the line, RADIUS delivers an intelligent and flexible system to fit any budget.
RSX208L Specifications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com
AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specifications are therefore subject to change without notice.
NOTE: This drawing has been reduced. Do not scale.
RSX208L Specifications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com
AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specifications are therefore subject to change without notice.
12
34
12
34
ABC
ABC
PR
O E
NG
INE
ER
2047
573-
CD
-A_D
WG
_CS
TME
R_R
SX
208L
THE
INFO
RM
ATI
ON
CO
NTA
INE
DH
ER
EIN
IS P
RO
PR
IETA
RY
AN
DC
ON
FID
EN
TIA
L P
RO
PE
RTY
OF
LOU
D T
EC
HN
OLO
GIE
S, I
NC
.A
LL R
IGH
TS R
ES
ER
VE
D
UN
LES
S O
THE
RW
ISE
SP
EC
IFIE
D:
ALL
DIM
EN
SIO
NS
AR
E IN
INC
HE
S D
UA
L [M
M] D
IME
NS
ION
S
FOR
RE
F O
NLY
TOLE
RA
NC
E IN
INC
HE
SLI
NE
AR
± 0
.13
in /
± 3.
3 m
mA
NG
LES
± 1
°
(X.X
X) =
RE
F D
IMS
NO
TO
LER
AN
CE
IMP
LIE
D
TSC
= T
HE
OR
ETI
CA
L S
HA
RP
CO
RN
ER
DIM
EN
SIO
NS
AC
RO
SS
CE
NTE
RLI
NE
STO
BE
SY
MM
ETR
ICA
LR
EV
ISIO
N:
DR
AW
ING
NU
MB
ER
:
THIR
D A
NG
LE P
RO
JEC
TIO
N
TITL
E:
SC
ALE
:1
1
ww
w.e
aw.c
om
129.
80[2
48.9
]
7.20
[182
.8]
TSC
25.2
0[6
40.0
]26
.89
[683
.0]
13.1
0[3
32.7
]
6.75
[171
.5]
12.3
8[3
14.5
]
3.50
[8
8.9]
TSC
6.25
[158
.8]
DA
TEC
HA
NG
E N
UM
BE
RR
EV
6/28
/16
EC
OW
H11
312
A
2047
573-
CD
A
AS
HE
ET
O
F 0.
100
DW
G C
US
TOM
ER
EA
W R
SX
208L
RIG
GIN
G S
YS
TEM
RE
TRA
CTA
BLE
4X P
RO
PR
IETA
RY
NO
TES
:1.
SY
MB
OL
IN
DIC
ATE
S C
EN
TER
OF
B
ALA
NC
E.
2. W
EIG
HT
AP
PR
OX
. 40.
5 lb
[18.
4 kg
].3.
SH
IPP
ING
WE
IGH
T A
PP
RO
X. 4
5 lb
[20.
4 kg
].
FRO
NT
GR
ILLE
NO
T S
HO
WN
FO
R C
LAR
ITY
RIG
HT
SID
ED
IME
NS
ION
S A
PP
LY
TO B
OTH
SID
ES
HA
ND
LE
BA
CK
AM
PLI
FIE
R
RS
X20
8LD
IME
NS
ION
S A
PP
LY T
O
TOP
AN
D B
OTT
OM
TOP
Exterior-grade hardwood plywood Weather-resistant textured RoadCoat™ Pre-treated, powder-coated perforated steel
MaterialFinishGrille
Enclosure
RSX208L Specifications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com
AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specifications are therefore subject to change without notice.
Performance DataSee NOTES GRAPHIC DATA for details
Frequency Response: VoicingsSapphire = green, White = orange, Grey = black, Blue = blue
SPL
(dB)
Frequency (Hz)10 100 1000 20000
-10
-50
-40
-30
-20
10
0
BeamwidthHorizontal = orange Vertical = black
Frequency (Hz)
Deg
rees
360
100
10
1100 1000 20000
Frequency Response: ProcessedLF = green, MF = orange, HF = black, Complete = blue
SPL
(dB)
Frequency (Hz)10 100 1000 20000
-10
-50
-40
-30
-20
10
0
Frequency (Hz)
Phase LinearityComplete = blue
Deg
rees
180
-0
-180
-90
90
10 100 1000 20000
RSX208L Specifications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com
AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specifications are therefore subject to change without notice.
Horizontal Polar DataSee NOTES GRAPHIC DATA for details
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
100Hz125Hz160Hz200Hz
250Hz315Hz400Hz500Hz
630Hz800Hz1000Hz1250Hz
1600Hz2000Hz2500Hz3150Hz
4000Hz5000Hz6300Hz8000Hz
10000Hz12500Hz16000Hz
RSX208L Specifications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com
AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specifications are therefore subject to change without notice.
Vertical Polar DataSee NOTES GRAPHIC DATA for details
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
90˚
-90˚
45˚
-45˚
0˚
135˚
-135˚
180˚
100Hz125Hz160Hz200Hz
250Hz315Hz400Hz500Hz
630Hz800Hz1000Hz1250Hz
1600Hz2000Hz2500Hz3150Hz
4000Hz5000Hz6300Hz8000Hz
10000Hz12500Hz16000Hz
NotesTABULAR DATA 1. Measurement/Data Processing Systems: Primary – FChart: proprietary EAW software; Secondary – Brüel & Kjær 2012. 2. Microphone Systems: Earthworks M30; Brüel & Kjær 4133 3. Measurements: Dual channel FFT; length: 32 768 samples; sample rate: 48 kHz; logarithmic sine wave sweep. 4. Measurement System Qualification (includes all uncertainties): SPL: accuracy +/-0.2 dB @ 1 kHz, precision +/-0.5 dB 20 Hz to 20 kHz, resolution 0.05 dB; Frequency: accuracy +/-1 %, precision +/-0.1 Hz, resolution the larger of 1.5 Hz or 1/48 octave; Time: accuracy +/-10.4 μs, precision +/-0.5 μs, resolution 10.4 μs; Angular: accuracy +/-1°, precision +/-0.5°, resolution 0.5°. 5. Environment: Measurements time-windowed and processed to eliminate room effects, approximating an anechoic environment. Data processed as anechoic or fractional space, as noted. 6. Measurement Distance: 7.46 m. Acoustic responses represent complex summation of the subsystems at 20 m. SPL is referenced to other distances using the Inverse Square Law. 7. Enclosure Orientation: For beamwidth and polar specifications, as shown in Mechanical Specification drawing. 8. Volts: Measured rms value of the test signal. 9. Watts: Per audio industry practice, “loudspeaker watts” are calculated as voltage squared divided by rated nominal impedance. Thus, these are not True Watt units of energy as defined by International Standard. 10. SPL: (Sound Pressure Level) Equivalent to the average level of a signal referenced to 0 dB SPL = 20 microPascals. 11. Subsystem: This lists the transducer(s) and their acoustic loading for each passband. Sub = Subwoofer, LF = Low Frequency, MF = Mid Frequency, HF = High Frequency. 12. Operating Mode: User selectable configurations. Between system elements, a comma (,) = separate amplifier channels; a slash (/) = single amplifier channel. DSP = Digital Signal Processor. IMPORTANT: To achieve the specified performance, the listed external signal processing must be used with EAW-provided settings. 13. Operating Range: Range where the processed Frequency Response stays within -10 dB SPL of the power averaged SPL within this range; measured on the geometric axis. Narrow band dips are excepted. 14. Nominal Beamwidth: Design angle for the -6 dB SPL points, referenced to 0 dB SPL as the highest level. 15. Axial Sensitivity: Power averaged SPL over the Operating Range with an input voltage that would produce 1 W at the nominal impedance; measured with no external processing on the geometric axis, referenced to 1 m. 16. Nominal Impedance: Selected 4, 8, or 16 ohm resistance such that the minimum impedance point is no more than 20% below this resistance over the Operating Range. 17. Accelerated Life Test: Maximum test input voltage applied with an EIA-426B defined spectrum; measured with recommended signal processing and Recommended Protection Filter. 18. Calculated Axial Output Limit: Highest average and peak SPLs possible during the Accelerated Life Test. The Peak SPL represents the 2:1 (6 dB) crest factor of the Life Test signal. 19. High Pass Filter: This helps protect the loudspeaker from excessive input signal levels at frequencies below the Operating Range.
GRAPHIC DATA 1. Resolution: To remove insignificant fine details, 1/12 octave cepstral smoothing was applied to acoustic frequency responses and 1/3 octave cepstral smoothing was applied to the beamwidth and impedance data. Other graphs are plotted using raw data. 2. Frequency Responses: Variation in acoustic output level with frequency for a constant input signal. Processed: normalized to 0 dB SPL. Unprocessed inputs: 2 V (4 ohm nominal impedance), 2.83 V (8 ohm nominal impedance), or 4 V (16 ohm nominal impedance) referenced to a distance of 1 m. 3. Processor Response: The variation in output level with frequency for a constant input signal of 0.775 V = 0 dB reference. 4. Beamwidth: Average angle for each 1/3 octave frequency band where, starting from the rear of the loudspeaker, the output first reaches -6 dB SPL referenced to 0 dB SPL as the highest level. This method means the output may drop below -6 dB SPL within the beamwidth angle. 5. Impedance: Variation in impedance magnitude, in ohms, with frequency without regard to voltage/current phase. This means the impedance values may not be used to calculate True Watts (see 9 above). 6. Polar Data: Horizontal and vertical polar responses for each 1/3 octave frequency band 100 Hz to 16 kHz or Operating Range.
RSX208L Specifications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com
AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specifications are therefore subject to change without notice.
Input Panel Signal Diagram
ADC Input TypeSelect Delay PEQ
HPF/LPF
EAW Focusing+ DynO DACOptiLogic
Gain &Polarity Mute
DanteReceiver
PowerAmp
HF
MF/LF
LF
DAC PowerAmp
DAC PowerAmp
User-accessibleParameters
EAW Focusing+ DynO
EAW Focusing+ DynO
OptiLogic
OptiLogic
Legend HPF High Pass Filter for crossover –or– Recommended High Pass Filter LPF Low Pass Filter for crossover LF/MF/HF Low Frequency / Mid Frequency / High Frequency AMP User Supplied Power Amplifier –or– Integral Amplifier for NT products XVR Passive LPFs, HPFs, and EQ integral to the loudspeaker EAW Focusing Digital Signal Processor capable of implementing EAW Focusing EAW DynO Digital Signal Processor capable of implementing EAW DynO processing