Rs brochure general
description
Transcript of Rs brochure general
THE SALE MANUAL OF PRODUCTS
HANGZHOU RISHENG DECONTAMINATION EQUIPMENT CO., LTD.
Add: NO. 168, Huapai Building, Liuxia District, Hangzhou City, China
Tel: +86-571-85808967
Fax: +86-571-85808965 Zip code: 310023
E-mail: [email protected] E-mail: [email protected]
www.risheng.com
Since 1992
1-2
Remove bad from good, never stop innovation
Prepared in 1992, and founded in 1993, "RISHENG" has been seeking excellence all the time.
Since its establishment, Risheng has been taking it as its responsibility to meet customers' every need, adhering to the quality policy
and development target of "To win via quality and never stop innovation", sticking to the business philosophy of " Let customers select and
use Risheng products at ease", commitment to the marketing of " Position products on middle and high-end market", and strengthening
the building up of its technical team and increasing its investment in the development of new products, thus "Risheng" takes the lead in
development of new products and application of new technology in compressed air purification sector in China all the time. Our target never
changes, which is: To become the most excellent manufacturing company of compressed air drying and purification equipment" !
Recalling the past, it's been a long time coming. In view of the 20 years' development, our emotion surging.
In 1992, "Risheng" started preparing;
In 1993, "Risheng" formally established and started designing, manufacturing and selling refrigeration compressed air dryer;
In 1994, "Risheng" was authorized to be China general agent of "domnick hunter";
"Risheng" became the first company to be identified as "the national high and new technology enterprise" in the compressed air
purification sector in China;
In 1996, "Risheng" successfully developed "energy-saving combined compressed air dryer", and acquired national patent;
In 1998, "Risheng" became the first company to get ISO 9001 Quality System Accreditation both domestically and internationally in the
compressed air purification sector in China;
In 1999, "Risheng" was the first company to develop the combined compressed air dryer with PDP-75℃ in the compressed air purification
sector in China;
In 2000, "Risheng" completed the development of the third generation refrigeration dryers, desiccant dryers and combined dryers;
In 2001, "Risheng" was the first company to successfully develop " environmental protection refrigeration dryers with R404a, R134a and R407c";
In 2003, "Risheng" successfully developed energy-saving steam heat recovery, low purge air loss blower desiccant air dryer; "Risheng"
successfully developed heat desiccant air dryer with single capacity of 620m3/min, which is the biggest dryer in Asia;
In 2005, As the industry association member, "Risheng" took part in the creation of industry standards;
In 2006, "Risheng" successfully developed "heat of compression (waste heat) desiccant air dryer";
In 2007, "Risheng" became the first company to get "production license" in the compressed air purification sector in China;
In 2008, "Risheng" became the first air dryer manufacturer to acquire CE certificate in the compressed air purification sector in China;
In 2009, "Risheng" started to supply big heat of compression (waste heat) desiccant air dryer with about 100 units per year to the Fortune
500 companies;
In 2011, "Risheng" became the industry association director and took part in studying the energy-saving standard of compressed air dryer;
Our SSD, PD energy-saving refrigeration dryers and some zero purge desiccant dryers were put into use successfully;
In 2012, "Risheng" and "PSI" (a famous filter element manufacturer in UK) set up a joint venture in Hangzhou and started mass production;
In September of the same year, "Risheng" again became the first company to pass "production license" strictly audit.
For the 20 years, we have been improving quality by good management, seeking development by innovation, casting the brand in
good faith, expanding the market in a win-win situation. Our products not only throughout the Country (for different projects, such as building,
rebuilding and re-moulding of large and medium sized enterprises), but also export to Southeast Asia, Middle East, South America, Europe,
Australia and more than 30 Countries.
3
Alibaba certification ISO9001 certification EU. PED certification EU. CE certification
Hangzhou high and new tech enterprises National industrial products production permit High and new technology enterprise of Zhejiang province
COMPANY INTRODUCTION QUALITY GUARANTEES
3-4
SSD Series Stainless Steel Dryer
Sturdy and durable
Different from Carbon steel material product.
Using 304S stainless steel for heat exchanger, water separator and
air connections can avoid the secondary pollution to air quality, so
the SSD series dryer can be directly used for food and medicine,
semiconductor, senior spraying and ect.
Nano anticorrosive coating on air condenser makes the useful life
longer.
Energy saving and environmental protection
Heat exchanger is following Europe and America advanced
plate - fin structure,highly heat-efficiency;
The inlet and outlet temperature difference of pre-cooler is 3-5℃,
which is much more better than the similar products and minimize the
outlet relative humidity and avoid condensation in the pipings.
Outlet compressed air relative humidity is low,the below air pipe
surface without Condensation phenomenon.
The pre-cooler reclaim nearly 90% compressed air,and greatly
reduces the evaporator load, so the power consumption of the
refrigerant compressor is low,only 70% of the normal one.
Friendly refrigerant is adopted for all series dryers
Security and Reliability
Multiple overload protection.
Newest CE certificate.
Outstanding Design
S S Dtainless teel ryer
3Capacity:
Working pressure:≤2.0 MPa (20 barg)
Max.inlet temperature:60℃
Max. Ambient temperature:50℃
Min. ambient temperature:5℃
Cooling type:air-cooled
Power supply:220V/1Ph/50Hz
Refrigerant:R134a (06-SSD~ 40-SSD)
R407C (60-SSD)
0.6~6.0 m /min
*Rated condition: Working pressure0.7 MPa, Inlet temperature 38℃, Ambient temperature 38℃, PDP 2-10℃.
*
orking pressure > 1.6 Mpa, the drainer need to replaced.
For presssure of <2.0MPa or >0.4MPa,please contact RISHENG.When the w
Technical Specification of RSLF -06-SSD~RSLF -60-SSD Series Dryer(Air Cooled)
SSD Stainless Steel Dryer by national testing, energy-saving effect
Refrigeration Compressed Air Dryers
Flow chart
Model Nominal Volume Flow
Nominal Power Air Connections Drain Connections Dimensions in mm Approx Weight
3Capacity:Working pressure:≤1.5 MPa (15 barg)Max.inlet temperature:60℃Max. Ambient temperature:50℃Min. ambient temperature:5℃ Max. Cooling water temperature:35℃Cooling type:air-cooled/water cooledPower supply:220V/1Ph/50Hz (60-PD~ 150-PD)380V/3Ph/50Hz (200-PD~ 1800-PD)Refrigerant: R407C (R22 optional)
6~180 m /min
5-6
Technical Specification of RSLS-120-PD~RSLS-1800-PD SeriesDryer(Water Cooled)
Technical Specification of RSLF -60-PD~RSLF -1800-PD Series Dryer(Air Cooled)
The specifications of this product is subject to changes without prior notice. Other product specifications please contact with our company.
Sturdy and durable Pre-cooler evaporator and liquip separator of PD series refrigeration dryers are all following all-in-one modular structure design.PD series dryer adopts thickened aluminum alloy of heat exchanger,whose corrosion resistance is more than twice the similar products.It do not make secondly contamination for the lower air pipe.Nanometer hydrophilic film
Energy saving and environmental protection
Heat exchanger is following Europe and the United state advancedplate - fin structure,highly heat-efficiency;
The inlet and outlet temperature difference of pre-cooler is 5-8℃,more than twice better than the similar products,Outlet compressed air relative humidity is low,the below air pipe surface without Condensation phenomenon.The pre-cooler reclaim nearly 90% compressed air,and greatlyreduces the evaporator load.so the power consumption of the refrigerant compressor is low,only 70% of the normal one.Friendly refrigerant is adopted for all series dryers.
Security and Reliability
The patented design external WS ensure excellent PDP;Evaporator can be leak test separately, greatly reduced leaking rist;Main parts are using world famous brand with reliable performance; With many overload protection and shut down protection; All series dryer have been passed the newest “CE”certificationby European Union .
Various control options
Standard model with fault alarm indicator; As customer require we will use SMC or PLC or touch screen; RS485 I/O, Profibus protocol, Modbus protocol and Ethernet areavailable on customer request.
Outstanding Design
PD Series Prominent Dryer
*Rated condition: Working pressure0.7 MPa, Inlet temperature 38℃, Ambient temperature 38℃, Cooling water temperature3 0℃, PDP 2-10℃.
*For presssure of <1.5MPa or >0.4MPa,please contact RISHENG.
P Drominent ryer
Refrigeration Compressed Air Dryers
Model Nominal Volume Flow
Nominal Power
Air Connections
Drain Connections
Dimensions in mm Approx Weight Electrical supply
Water Connections
Max Water Flow
Model Nominal Volume Flow
Nominal Power
Air Connections
Drain Connections
Dimensions in mm Approx Weight Electrical supply
7-8
Technical Specification of RSLF-800~RSLF-3000 Series Air Cooled Dryers (standard)
The air inlet and outlet is flange connection, and standard as JB/T81-94;Drain outlet for all refrigeration dryers is tapered thread connection.
Rated power includes that of fan.
The dimensions and weights in the above chart are only for reference.
Any change of the design won't be informed.
Technical Specification of RSLS-800~RSLS-5500 Series Water Cooled Dryers (standard)
The air inlet and outlet is flange connection, and standard as JB/T81-94;
Drain outlet for all refrigeration dryers is tapered thread connection.
The dimensions and weights in the above chart are only for reference. Any change of the design won't be informed.
RSL* series Refrigeration Compressed Air Dryer
3Capacity range:100~550 m /minPressure range:<1.0 MPa (10 barg)Max. Inlet temperature:50℃ Max. Ambient temperature:45℃Min.ambient temperature:5℃Max. Cooling water temperature:35℃Cooling type: Air-cooled / Water-cooledPower supply:380V/3Ph/50HzRefrigerant: R407C(R22 is optional)
*Rated condition: Working pressure 0.7 MPa, Inlet temp38℃, Ambient temp 38℃, Cooling water temp 30℃, PDP 2-10℃
*For presssure of <1.0MPa or >0.4MPa,please contact RISHENG.
Technical Design
Safe and reliable Adopt superior quality compressor and set multiple protection. Patented WS water separator ensures super dew point.Essential components are international famous brand, with high reliability.
Energy saving and environmental protection
Heat exchanger design is based on HTFS of Aspen. Twisted tape in the heat exchanger pipe can improve heat transfer efficiency. 8~10℃ Temperature difference between inlet and outlet of precooler, which is not only ensure minimum outlet relative humidity, but also stop orifice freezing, and greatly superiorto congeneric products. Precooler recovered more than 90% cooling capacity, and reducedload of evaporator efficiently, so total energy consumption is only85% of congeneric products.Environmental protection refrigerant for all range products, whichcompliance with differenet environmental laws of different countries. Various controller types
Mechnical type with trouble alarm is standard configuration. Options for different requirement: Single chip, PLC, touch sreen and ect. Can meet different requirement from RS485 I/O、Profibus、Modbus、to Ethernet.
Work flow
Refrigeration Compressed Air Dryers
Model Nominal Volume Flow
Nominal Power
Air Connections
Drain Connections
Dimensions in mm Approx Weight Electrical supply
Water Connections
Max Water Flow
Model Nominal Volume Flow
Nominal Power
Air Connections
Drain Connections
Dimensions in mm Approx Weight
Electrical supply
9-10
1.21 1.15 1.10 1.02 0.89 0.79 0.69
1.36 1.11 1.00 0.92 0.83 0.76 0.69 0.56 0.46
0.76 0.86 0.92 0.93 1.00 1.04 1.08 1.11 1.15 1.18 1.22 1.25 1.28 1.30 1.31 1.32 1.32 1.33
1.17 1.09 1.00 0.92 0.84
1.00
1.50
Accurate selection of refrigeration compressed air dryer
According to the cooling type, our L series refrigeration compressed air dryer can be divided into two types:
the air-cooled type (F) and the water-cooled one (S).
When considering the final model of the refrigeration compressed air dryer, we need to ensure the following
technical parameters first, such as the real maximum flow capacity(m3/min), the min. inlet pressure(MPA(g)),
the max. inlet temperature (℃), the dew point temperature (℃), and the max. ambient temperature(℃).
Based on the above parameters, please refer to the following chart to get the modulus and put it into the
following formula to get the selection capacity.
3Acutal capacity (m /min) = selection capacity*KA*KB*KC (or KC')
Working pressure modulus KA
Working pressure MPa(g)
Correction modulus KA
Inlet temp modulus KB
Inlet temp℃
Correction modulusKC
Ambient temp modulus KC
Ambient temp℃
Correction modulus KC
Cooling water temp modulus KC'
Cooling water inlet temp℃
Correction modulusKC'
Conversion chart of Pressure dew point and Atmospheric dew point
Correlation chart of Atmospheric dew point and water content
Refrigeration Compressed Air Dryers
Selection modulus of refrigeration compressed air dryer
Pre
ss
ure
do
w p
oin
t ℃
Atmospheric dew point ℃
Dew point Moisture content3 (℃) (g/m )
Dew point Moisture content3 (℃) (g/m )
Dew point Moisture content3 (℃) (g/m )
Dew point Moisture content3 (℃) (g/m )
BA
RSXW Series Heatless Regeneration Compressed Air Dryer
11-12
3Capacity range:2~200 m /min
Pressure range:0.4~1.0 MPa
(4~10 barg)
Max. inlet air temperature:50℃
Max. ambient temperature:45℃
Power supply:220V/1Ph/50Hz
PDP:-20℃、-40℃、-70℃
* Rated working conditions:
Working pressure 0.7 MPa,
Inlet air temperature 38℃,
Ambient tempreature 38℃,
PDP- 20℃,
Regeneration air consumption<1 4 %.
*Above 1.0 MPa can be customized.
Reliable design
Adsorption tower bottom by supporting porcelain ball,
which make the airflow distribution more uniform;
not only can prevent the bottom adsorbent soaked in water,
but also can extend the life of the adsorbent.
Stainless steel shunt with special design, can great reduce
the pressure loss.
Special customized high-performance adsorbent, can achieve
excellent dew point.
A full range of standard configuration for high performance
pneumatic valve, when it's running, reliability and pressure
loss are significantly better than the film valve, solenoid valve.
Standard gas control valve control with high efficiency oil, dust filter.
Various control options
A full range of standard MCS microcomputer controller,
(MCS:Microprocessor Control System)
Optional: PLC, touch screen ...with Siemens, ABB and etc. brands,
can meet the communication requirements of users from
RS485 I/O、Profibus、Modbus、to the Ethernet connection.
Energy-saving
Optional DPOS dew point control system of energy saving
in the condition of load fluctuation, can prolong the adsorption
time, the comprehensive energy consumption reduced to below 75%.
(DPOS:Dew Point Operation System)
Technical Specification of RSXW-20~RSXW-2000 Series Heatless Regeneration Compressed Air Dryer
The inlet/out connection type of above dryer is flange connection, standard of HG20593/97;
And changes of above dryer won't be informed. Pls contact RISHENG about special demands.
RSXW
RSXW-20
RSXW-30
RSXW-60
RSXW-80
RSXW-400
RSXW-350
RSXW-300
RSXW-250
RSXW-200
RSXW-150
RSXW-100
2
3
6
8
10
15
20
25
30
35
40
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
DN20
DN80
DN65
DN80
DN80
DN65
DN50
DN50
DN40
DN40
DN25
900
900
1120
1020
1252
1300
1600
Kg
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
1600
1600
1730
1860
520
520
520
520
520
520
552
603
654
704
755
1743
2115
2262
1902
1925
1973
2138
2113
1498
2132
2159
240
300
500
550
950
1100
1200
1350
1500
1650
RSXW-500
RSXW-600
RSXW-700
RSXW-800
RSXW-2000
RSXW-1500
RSXW-1200
RSXW-1000
50
60
70
80
100
120
150
200
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
DN100
DN200
DN200
DN150
DN150
DN150
DN125
DN125
2000
2050
2100
2100
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
805
855
906
906
2329
2352
2277
2500
1850
2000
2500
2800
For more info., Pls contact RISHENG.
660
Regenerative Compressed Air Dryers
Model Nominal Volume Flow
Nominal Power Air Connections Dimensions in mm Approx WeightElectrical Supply
Flow chart
BA
15-16
RSXJ Series External Heat Regeneration Compressed Air Dryer
3Capacity range:3~500 m /min
Pressure range:0.4~1.0 MPa
(4~10 barg)
Max. inlet air temperature:43℃
Max. ambient temperature:45℃
Power supply:380V/3Ph/50Hz
Working cycle:8h
PDP:-20℃、-40℃、-70℃
* Rated working condition: Working pressure0.7 MPa, Inlet air temperature 38℃, Ambient temperature 38℃, PDP-20℃ Regeneration air consumption<7 %。* Above 1.0 MPa can be customized. Technical Specification of RSXJ-30~RSXJ-5000 Series External Heat Regeneration Compressed Air Dryer
RSXJ
RSXJ-30
RSXJ-60
RSXJ-80
RSXJ-100
RSXJ-500
RSXJ-400
RSXJ-350
RSXJ-300
RSXJ-250
RSXJ-200
RSXJ-150
3
6
8
10
15
20
25
30
35
40
50
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
1.5
3
4
5
7.5
10
12.5
15
17.5
20
25
DN25
DN100
DN80
DN80
DN80
DN65
DN65
DN50
DN50
DN40
DN40
1020
1252
1300
1252
1600
1600
1730
Kg
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
1860
2000
2050
2100
520
520
520
520
603
654
704
755
805
855
906
1800
1925
1925
1973
2113
2157
2132
2159
2329
2352
2277
500
700
950
1150
1600
1800
1900
2200
2500
3000
RSXJ-600
RSXJ-700
RSXJ-800
RSXJ-1000
RSXJ-4000
RSXJ-3500
RSXJ-3000
RSXJ-2500
RSXJ-2000
RSXJ-1500
RSXJ-1200
60
70
80
100
120
150
200
250
300
350
400
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
30
35
40
50
60
75
100
125
150
175
200
DN125
DN300
DN200
DN250
DN300
DN200
DN200
DN150
DN150
DN150
DN125
2100
2600
2800
2800
2800
3000
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
906
1250
1500
1500
1600
1700
2500
2752
2850
3020
3020
3010
3700
4000
5000
5500
6500
RSXJ-5000 500 380V/3PH/50Hz 250 DN350
6000
For more info., Pls contact RISHENG.
1400
Reliable design
Adsorption tower bottom by supporting porcelain ball, which make the airflow distribution more uniform, not only can prevent the bottom adsorbent soaked in water, but also can extend the life of the adsorbent. Stainless steel shunt with special design, can great reduce the pressure loss. Special customized high-performance adsorbent, can achieve excellent dew point. A full range of standard configuration for high performance pneumatic valve, when it's running, reliability and pressure loss are significantly better than the film valve, solenoid valve. Configuring multiple protection of electric heater, greatly improving the reliability. Standard gas control valve control with high efficiency oil, dust filter.
Various control options
A full range of reliable PLC controller;Optional: PLC, touch screen ...with Siemens, ABB and etc. brands, can meet the communication requirements of users from RS485 I/O、Profibus、Modbus、to the Ethernet connection.
Energy-saving
Optional LDCS load energy saving control system to ensure performance conditions, to be more precise control of regeneration energy consumption;contrast with fixed cycle, control model, it can save at least 8% more comprehensive energy consumption.Optional DPOS dew point control system of energy saving in the condition of load fluctuation, can prolong the adsorption time, the comprehensive energy consumption reduced to below 75%.
(LDCS:Load Dependent Control System)(DPOS:Dew Point Operation System)
Regenerative Compressed Air Dryers
Model Nominal Volume Flow
Nominal Power Air Connections Dimensions in mm Approx WeightElectrical Supply
Flow chart
BA
RSXB Series Blower Purge Regeneration Compressed Air Dryer
17-18
Technical Specification of RSXB Series Blower Purge Compressed Air Dryer
Flow range:Pressure range:
Max.inlet temperature:Max.condition for blower suction:
Power supply:Work cycle:Pressure dew point:
36~200 m /min0.4~1.0 Mpa
(4~10 barg)43℃
40℃ (RH=65%)
380V/3Ph/50Hz8h
-20℃,-40℃,-70℃
*
A
*
Rated working condition : Working pressure 0.7Mpa, Inlet temperature 38℃,
mbient temperature 38 ℃, PDP -20℃,Inlet required for blower suction:38℃(RH=65%),purge air loss is zeroFor high pressure type ≥1.0Mpa is available for
custom-made.
Reliable Design
Patented Process of RISHENG;
Supportive Ceramic Balls used at the bottom of adsorption tower make
uniform air-flow distribution,in this way ,desiccant can be protected
from soaking and also get longer service life,together with special
designed stainless steel flow divider,pressure loss can be greatly reduced.
Special designed high performance desiccant can get best dew point.
Famous blower is with reliable performance and low energy loss.
Pneumatic valves are made by special materials with superb
thermostability,by using double activate solenoid valves ,the reliability
and service life can be greatly improved.
Standard configuration is using high efficiency oil-removed and
dust-removed filter for pneumatic valves.
Standard configuration is using 304S stainless steel for pneumatic
piping line.
Various controller
Standard configuration is using reliable PLC controller ;
Optional Siemens and ABB brand PLC or touch screen and etc.
We can meet various customer requirements for communication,
connecting RS485 I/O,Profibus or Modbus to Ethernet.
Energy-saving
LDCS-Load Dependent Control System ensure the case that
performance is best and at the meantime to control the purge air
loss accurately,compared with fixed cycle time control type ,LDCS
could save at least 8% comprehensive energy consumption.
DPOS-Dew Point Operation System can delay adsorption time
underunstable load, DPOS could save at least 75% comprehensive
energy consumption.
(LDCS:Load Dependent Control System)
(DPOS:Dew Point Operation System)
DN200
DN200
Regenerative Compressed Air Dryers
Model Nominal Volume Flow
PowerAir Connections Dimensions in mm ApproxWeight
Electrical Supply
Flow chart
RSXB-ZERO Series Purge Regeneration Compressed Air Dryer
19-20
Flow range:
Pressure range:0.4~1.0 MPa (4~10 barg)
Max.inlet temperature:43℃
Max.Cooling water temperature:35℃
Max.condition for blower suction:40℃
(RH=65%)
Power supply:380V/3Ph/50Hz
Work cycle:8h
Pressure dew point:-20℃,-40℃,-70℃
36~200 m /min
*
Working pressure 0.7Mpa,
Inlet temp 38℃,
Ambient temp 38 ℃,PDP -20℃,
Cooling water temp 30℃
Inlet required for blower suction:38℃(RH=65%),
purge air loss is zero.
* For high pressure type ≥1.0Mpa
is available for custom-made.
Rated working condition:
RSXY-ZERO Series Zero Purge Heat Regeneration Compressed Air Dryer
Flow range
Pressure range:0.4~1.0 MPa (4~10 barg)
Min.inlet temperature:105℃
Max.Cooling water temperature:35℃
Power supply:220V/1Ph/50Hz(Standard)
380V/3Ph/50Hz (Add additional heating device)
Work cycle:8h
PDP:-20℃、-40℃
3:40~500 m /min
* Rated working condition:
Working pressure 0.7Mpa,
Inlet temp 120℃,PDP -20℃,
Cooling water temperature 20℃
Purge air loss is zero.
* For high pressure type ≥1.0Mpa is
available for custom-made.
For more info.
Pls contact RISHENG.
For more info., Pls contact RISHENG.
Reliable Design Patented Process of RISHENG;Supportive Ceramic Balls usedat the bottom of adsorption tower makeuniform air-flow distribution,in this way ,desiccant can be protectedfrom soaking and also get longer service life;
Lotus shape designed stainless steel flow divider,pressure loss can
be greatly reduced. Special designed high performance desiccant can get best dew point.
Adopt high efficiency aftercooler designed by ASPEN PLUS software.Pneumatic valves are made by special materials with superbthermostability,by using double activate solenoid valves ,the reliability and service life can be greatly improved.Standard configuration is using high efficiency oil-removed and dust-removed filter for pneumatic valves.Standard configuration is using 304S stainless steel for pneumaticpiping line.
Various controller Standard configuration is using reliable PLC controller; Optional Siemens and ABB brand PLC or touch screen and etc.We can meet various customer requirements for communication,connecting RS485 I/O,Profibus or Modbus to Ethernet.
Energy-saving LDCS-Load Dependent Control System ensure the case thatperformance is best and at the meantime to control the purge airloss accurately,compared with fixed cycle time control type ,LDCScould save at least 8% comprehensive energy consumption.DPOS-Dew Point Operation System can delay adsorption timeunderunstable load, DPOS could save at least 75% comprehensiveenergy consumption.
(LDCS:Load Dependent Control System)(DPOS:Dew Point Operation System)
Regenerative Compressed Air Dryers
Reliable Design
Patented Process of RISHENG;
Supportive Ceramic Balls used at the bottom of adsorption tower make
uniform air-flow distribution,in this way ,desiccant can be protected
from soaking and also get longer service life,together with special
designed stainless steel flow divider,pressure loss can be greatly reduced.
Special designed high performance desiccant can get best dew point.
Famous blower is with reliable performance and low energy loss.
Pneumatic valves are made by special materials with superb
thermostability,by using double activate solenoid valves ,the reliability
and service life can be greatly improved.
Standard configuration is using high efficiency oil-removed and
dust-removed filter for pneumatic valves.
Standard configuration is using 304S stainless steel for pneumatic
piping line.
Various controller
Standard configuration is using reliable PLC controller ;
Optional Siemens and ABB brand PLC or touch screen and etc.
We can meet various customer requirements for communication,
connecting RS485 I/O,Profibus or Modbus to Ethernet.
Energy-saving
LDCS-Load Dependent Control System ensure the case that
performance is best and at the meantime to control the purge air
loss accurately,compared with fixed cycle time control type ,LDCS
could save at least 8% comprehensive energy consumption.
DPOS-Dew Point Operation System can delay adsorption time
underunstable load, DPOS could save at least 75% comprehensive
energy consumption.
(LDCS:Load Dependent Control System)
(DPOS:Dew Point Operation System)
21-22
BA
All connection is made by flange for dryers,flange standard is HG20593/97, please contact Risheng for special connection requirements.
RSXY
RSXY-400
RSXY-600
RSXY-1800
RSXY-1500
RSXY-1200
RSXY-900
40
180
150
120
90
60
220V/1PH/50HZ
220V/1PH/50HZ
220V/1PH/50HZ
220V/1PH/50HZ
220V/1PH/50HZ
220V/1PH/50HZ 1.0
1.0
1.0
1.0
1.0
1.0
1%
1%
1%
1%
1%
1%
18
75
62
50
38
25
DN100
DN125
DN150
DN150
DN200
DN200
3200 1600 2685 3400
3000
4000
4000
4500
4500
1800 3030 4400
620032352500
850035652500
2800
2800
13000
150003545
3525
RSXY-2000
RSXY-2500
RSXY-3000
RSXY-5000
RSXY-4000
RSXY-3500
250
500
400
350
300
220V/1PH/50HZ
220V/1PH/50HZ
220V/1PH/50HZ
220V/1PH/50HZ
220V/1PH/50HZ 1.0
1.0
1.0
1.0
1.0
1%
1%
1%
1%
1%
105
180
165
145
125
DN250
DN250
DN300
DN300
DN350
5000 3500 3910 20000
5000
5500
5500
6000
3500 3900 24000
3000043753500
3500 4255 35000
3000044503800
200 220V/1PH/50HZ 1% 82 16500368028004500DN2001.0
m /min3
Flow range:
Pressure range:0.4~1.0 MPa (4~10 barg)
Min.inlet temperature:105℃
Max.Cooling water temperature:35℃
Power supply:220V/1Ph/50Hz(Standard)
380V/3Ph/50Hz (Add additional heating device)
Work cycle:8h
PDP:-20℃、-40℃
340~500 m /min
* Rated working condition:
Working pressure 0.7Mpa,
Inlet temperature 120℃,PDP -20℃,
Cooling water temperature 30℃
Purge air loss is ≤1%.
* For high pressure type ≥1.0Mpa and high inlet
temperature type >140℃is available for custom-made.
Regenerative Compressed Air Dryers
Model Nominal Volume Flow
Nominal Power Air Connections Dimensions in mm Approx Weight
Electrical Supply
RSXY Series Compress Heat of Compressed Air Dryer Flow chart
RSXY Series Compress Heat Regeneration Compressed Air Dryer
Rebirth consumes The tolerance
Max Water Flow
Reliable Design Patented Process of RISHENG;Supportive Ceramic Balls usedat the bottom of adsorption tower makeuniform air-flow distribution,in this way ,desiccant can be protectedfrom soaking and also get longer service life;
Lotus shape designed stainless steel flow divider,pressure loss can
be greatly reduced. Special designed high performance desiccant can get best dew point.
Adopt high efficiency aftercooler designed by ASPEN PLUS software.Pneumatic valves are made by special materials with superbthermostability,by using double activate solenoid valves ,the reliability and service life can be greatly improved.Standard configuration is using high efficiency oil-removed and dust-removed filter for pneumatic valves.Standard configuration is using 304S stainless steel for pneumaticpiping line.
Various controller Standard configuration is using reliable PLC controller; Optional Siemens and ABB brand PLC or touch screen and etc.We can meet various customer requirements for communication,connecting RS485 I/O,Profibus or Modbus to Ethernet.
Energy-saving LDCS-Load Dependent Control System ensure the case thatperformance is best and at the meantime to control the purge airloss accurately,compared with fixed cycle time control type ,LDCScould save at least 8% comprehensive energy consumption.DPOS-Dew Point Operation System can delay adsorption timeunderunstable load, DPOS could save at least 75% comprehensiveenergy consumption.
(LDCS:Load Dependent Control System)(DPOS:Dew Point Operation System)
RSC Series Patented Combined Compressed Air Dryer
Technical Specification of RSCF-30~RSCF-400 Series Combined Compressed Air Dryers (Air-cooled type)
Technical Specification of RSCS-150~RSCS-1800 Series Combined Compressed Air Dryers (Water-cooled type)
A B
23-24
3Capacity range:10~350 m /minPressure range:0.4~1.0 MPa (4~10 barg)Max. Inlet temperature:50℃Max. Ambient temperature:45℃Min. Ambient temperature:5℃Max. Cooling water temperature:35℃Cooling type:Air-cooled/Water-cooledPower supply :220V/1Ph/50Hz (RSC*-100 ~ RSC*-150)380V/3Ph/50Hz (RSC*-200 ~ RSC*-3500)Refrigerant:R407C (R22 is optional)PDP:-40℃、-70℃
*Rated working condition:
Working pressure 0.7 MPa,
Inlet temperature 38℃,
Ambient temperature 38℃,
Pressure dew point - 40℃,
Cooling water temp 30℃,
Purge air loss<3 %。
*For pressure above 1.0MPa,please contact risheng.Reliable design
Our patented flow is cryogenic adsorption and cold regeneration.
Porcelain ball in the bottom of tower can make more balance air flow,
which not only prevent desiccant in the bottom from soaking, but
also prolong desiccant life.
Special designed stainless steel dust strainer can greatly reduce
pressure loss.
Special customized high efficiency desiccant can ensure perfect
dew point.
Standard configuration for all range is high efficiency poppet valve,
which reliability and pressure loss are much more superior to thin
film vale, solenoid valve and ect.
Energy saving and environmental protection
Heat exchanger is with high efficiency plate-fin structure which is
imported from the West;
Precooler recovered more than 90% cooling capacity, and reduced
load of evaporator efficiently, so total energy consumption is only
70% of congeneric products.(DPOS:Dew Point OperationSystem)
DPOS energy saving system can prolong adsorption time and
reduce total energy consumption to less than 75%, even in the
fluctuate load condition.
All the adsorption tower, valves, pipings and ect are treated with
refrigeration heat preservation.
Environmental protection refrigerant for all range products, which
compliance with differenet environmental laws of different countries.
Various controller types
Reliable PLC controller for whole range.
Optional: Simens, ABB brand of PLC, touch sreen and ect.
Can meet different requirement from RS485 I/O、Profibus、Modbus、
to Ethernet.
RSCS
RSCS-150(CJ)
RSCS-200(CJ)
RSCS-250(CJ)
RSCS-300(CJ)
RSCS-1800(CJ)
RSCS-1500(CJ)
RSCS-1200(CJ)
RSCS-1000(CJ)
RSCS-800(CJ)
RSCS-600(CJ)
RSCS-500(CJ)
RSCS-400(CJ)
15
20
25
30
40
50
60
80
100
120
180
150
380V/3PH/50Hz
220V/1PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
7.3
8.96
10.8
13.1
17.5
21.3
25.7
34.1
44.9
54.7
75.7
90.9
DN50
DN200
DN200
DN150
DN150
DN150
DN125
DN100
DN80
DN80
DN65
DN65
Rc3/4"
Rc3/4"
Rc1"
Rc1"
Rc1-1/4"
Rc1-1/4"
Rc1-1/4"
Rc1-1/2"
Rc1-1/2"
Rc1-1/2"
Rc1-1/2"
Rc1-1/2"
t/h
2
3
3.2
4
7.2
9
12
15
18
20
24
1750 1600 2138
1750
1850
1800
2200
2300
2350
1600
1600
1600
1600
1600
1600
2113
2157
2132
2392
2350
2277
1450
1650
1850
2300
2800
3000
3300
Kg
6
Combined Compressed Air Dryers
Model Nominal Volume Flow
Nominal Power Air Connections Dimensions in mm Approx Weight
Electrical Supply DrainConnections
Model Nominal Volume Flow
Nominal Power
Air Connections Dimensions in mm Approx Weight
Electrical Supply DrainConnections
For more info., Pls contact RISHENG
Flow chart
Filter With Die-cast Aluminum Shell
Filter With Carbon Steel Shell and Flange Connection
RSG series compressed air filters fall into 7 grades: PF、AO、AA、AR、AAR、AX、and ACS,Among them PF、AO、
AA、and AX are oil and dust removal filters; the ACS is activated carbon filter,The AR and AAR are dust filters.The sign of PF、AO、AA、AX、AR、AAR、ACS need to be put in the place of “*”in the above list when ordering, for instance, RSG-AO-0220F.
If high pressure filter and stainless steel filter are required, please contact RISHENG.
Important Instruction
We supply filter elements of HANKISON、Ultrafilter、Zander、PSI、PAKER、ZEKS brands,etc. For special requirements, please contact RISHENG.
All compressed air without purification contains oil, dirt
and water and etc, these pollutants are resistance for
the modern industry to enhance product quality and
improve labor efficiency.
RSG series compressed air filter is a kind of fiber filter;
the filter element is made of imported high-quality glass
fiber, which can effectively remove the pollutants in the air.
This series of filter is divided into thread connection
(aluminum alloy shell) and flange connection (steel shell).
27-28
1000F-7800F
/PF-HT /120
/120/AO-HT
/AA-HT
/AX-HT
/AR-HT
/AAR-HT
/120
/120
/120
/120
RSG-*-1000F
RSG-*-1200F
RSG-*-1300F
RSG-*-1950F
RSG-*-2500F
RSG-*-3250F
RSG-*-4650F
RSG-*-5200F
RSG-*-7800F
60.0
70.0
80.0
120.0
160.0
200.0
280.0
312.0
468.0
493
617
617
617
666
800
906
263
290
290
299
343
368
420
420
476
1119
1179
1179
1206
1354
1459
1583
1583
1646
145
150
240
380
455
850
5
7
8
12
800
Overall design
RSG series filter elements adopt special anti-leakage
technology,assuring filtering effect.
Good non-corrodibility
RSG series filter shells adopt anodic oxidation treatment
for its surface.
Good hydrophobicity of filter material
RSG series filter elements adopt genuine boron silicate
glass fiber of American HV brand with small mist rapidly,
and reduce pressure drop.
User-friendly design with flange shell
Flange shells adopt user-friendly design, convenient for
replacement of filter elements.
RSG-*-0125G
RSG-*-0145G
G1-1/4"
G1-1/2"
7.20
8.70
(kg)
Technical Specification
Specification Parameter List
Modification for model selection
RSG Series Compressed Air Filters
RSG series compressed air filter
Product level Filtration precision Residual oil mist content Initail pressure drop(MPa)
Dry pressure drop Wet pressure drop
Max. work temperature
Min. worktemperature
Max. work pressure
Model Nominal Volume Flow
Air Connections
Dimensions in mmApproxWeight
Filterelement
Mode Quantity
(kg)
Model Nominal Volume Flow
Air Connections
Dimensions in mmApproxWeight
Filterelement
Mode Quantity
Work pressure (MPa(g))
Correction index
Replace filter element height
Replace filter element height
3(1atm、21℃ below、mg/m )
Rated working pressure:0.8MPa
Max. working Pressure:0.95MPa
(Flange Type)
Max. working Temperature:1.6MPa
(Thread Type)
Max. working temperature:66℃
Min. working temperature:1.5℃
Differential pressure:0.007MPa
29-30
99% of high efficiency
cost saving
element unneeded, convent for maintenance
patented product tested in practice
High flow rate
extremely low differential pressure
automatic drainer equipped
G1/2"
G3/4"
"
"
"
"
"
technical parameters Product Features
Specification Parameter List
Modification for model selection
WS High Efficiency Water Separator
Heat transfer medium flow
by air go heat exchange
tube (Double tube side)
Cooling water walk path
By high heat exchange the
tooth thread copper tube
Set up automatic drainer
Inlet air temperature:≤80℃
Outlet air temperature:≤45℃
Rated working pressure:0.6~0.95MPa(g)
Ambient temperature:38℃
Pressure drop:≤0.015Mpa
Cooling water temperature:2℃ 35~ ℃
RSHF
RSHF-05
RSHF-10
RSHF-20
RSHF-30
RSHF-400
RSHF-350
RSHF-300
RSHF-200
RSHF-150
RSHF-100
RSHF-60
0.6
1.2
2.4
3.6
6.5
11
17
22
33
37
44
220V/1PH/50Hz
220V/1PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
380V/3PH/50Hz
38
55
120
120
140
250
750
750
1950
1950
2200
R1/2"
D N100
D N65
D N80
D N80
D N65
R2"
R1-1/2"
R1"
R1"
R1/2"
350
420
555
555
560
680
830
Kg
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
220V/1PH/50Hz
890
1300
1270
1270
240
340
440
440
262
350
405
440
530
550
550
560
555
555
645
500
645
745
785
1070
1070
1070
15
25
40
50
60
80
120
130
200
220
225
RSHF-600
RSHF-500 55
64
380V/3PH/50Hz
380V/3PH/50Hz
3000
3000 D N125
D N100 1270
1340
600
800
1070
1240
250
300
w
RSHS
RSHS-150
RSHS-200
RSHS-300
RSHS-350
RSHS-1500
RSHS-1000
RSHS-800
RSHS-600
RSHS-500
RSHS-400
17
17
33
37
44
55
64
80
100
150
5.1
5.1
9.9
9.9
13.2
16.5
19.2
24.0
30.1
45.0
DN65
DN150
DN150
DN200
DN125
DN125
DN100
DN100
DN100
DN65
1426
1426
1450
1450
1450
1702
1702
Kg
2152
2152
2806
280
280
365
365
365
390
390
445
390
500
280
280
412
412
412
452
452
535
452
589
100
102
160
165
255
260
340
350
450
170
mm
Rc1-1/4
Rc3
Rc2-1/2
Rc2-1/2
Rc2
Rc2
Rc1-1/2
Rc1-1/2
Rc1-1/4
Rc1-1/2
t/h
Technical Specification of RSHF-05~RSHF-600 Series After-air-cooler(Standard)
RSH* Series After-air-cooler
Compressed air After-cooler
WS high efficiency water separator
(kg)
Model Nominal Volume Flow
Pipe diameter of Air Outlet/inlet
Dimensions in mmApproxWeight
Pressure (MPa(g))
Correction index
technical parameters Product Features
Model Nominal Volume Flow
Air Connections
Dimensions in mm ApproxWeight
Electrical supply Nominal Power
Technical Specification of RSHF-150~RSHF-1500 Series After-water-cooler(Standard)
Model Nominal Volume Flow
Air Connections
Dimensions in mmApproxWeight
Water Connections
Max Water Flow
RSHF-100 Series connection is made by flange
Flange standard is HG20593/97, All the drainage outlet connection is thread connection.
Inlet temperature greater than 80 after-cooler, please contact RISHENG.
thread connection, RSHF(S)-150 Series connection is made by connection
33-34
Treated compressed air quality Typical applications
RSXYR seriesfurnished without WS
Oilless air quality classes to ISO8573.1:Class1.-.1
Extremely dry air quality classes to ISO8573.1:Class1.2.1
Dry air quality classes to ISO8573.1:Class1.4.1
Oilless and odorless air quality classes to ISO8573.1:Class1.-.1
AO
AO
AO
AO
AO
AO
AA
AA
AA
ACS
AR
ACS
AR AAR
AR AAR
AR AAR
RSL
RSXW(J)
RSXY
RSXB
Water content:
Relative humidity100%
Granule:≤0.01μm3Oil content:≤0.01mg/m
Injection molding, precise
pneumatic instrument,
control valve, advanced
Isolation of high -voltages, powder
transportation and drying, advanced
spray, processing of electric motor
components, precise pneumatic
measurement, package printing and
textile machine…
Precise pneumatic tools,
pneumatic instrument, spray,
pneumatic motor, pneumatic
conveying...
Note:The above configurations are only for reference,users can adjust in accordance with the actual condition.
RSC
RSLY series air precooling machine is through
the cooling way to compressed air of the gaseous
water condensed liquid,Then through the
gas-liquid separator the separation process.
The product is mainly used in air separation
and related industry technological requirements:
Need to compressed air for precooling,And ensure
the outlet temperature in 3 ~ 8℃, such as: air psa
nitrogen making, etc.
Excellent design, ensure that air outlet
temperature stability, small pressure drop.
The key parts imported brand.
According to customers' demand of supply:
single chip microcomputer PLC touch screen, etc.
、 、
、
Standard configuration with fault alarm
instrument type;
Can meet the user from RS485 I/O Profibus
Modbus to Ethernet connection and
communication requirements.
Gas inlet pressure:0.4-0.95MPa
(Otherwise low pressure optional)
Gas inlet temperature:≤45℃
Ambient temperature:2℃~38℃ (Air cooler)
Cooling water temperature:≤35℃ (Water cooler)
Cooling water pressure:
Pressure drop:≤0.01MPa
(Rated working pressure: 0.7MPa the following)
Gas outlet temperature:3℃~8℃
0.2-0.4MPa(Water cool)
RSLYS Series Pre-cooler Compressed Air
Super precise spray, electric industry,
high precise controller, aerospace , laser
mirror cooling, chemical fiber and film
manufacturing…
RSLYS Series Water-cooled Pre-cooler of Compressed Air
Technical Specification of RSLYS-30~RSLYS-1000 Series water-cooler pre-cooler of Compressed Air
Model Nominal Volume Flow
Nominal Power
Air Connections Dimensions in mm Approx Weight
Electrical Supply DrainConnections
WaterConnections
Max Water Flow
Model Nominal Volume Flow
Nominal Power Air Connections Dimensions in mm Approx Weight
Electrical Supply DrainConnections
Technical Specification of RSLYF-30~RSLYF-400 Series air-cooler pre-cooler of Compressed Air
And changes of above dryer won't be informed. Pls contact RISHENG about special demands.
System configuration chart
Configuration Chart of Compressed Air Purification System
WS High EfficiencyWater Separator
Extremely dry air quality classes to ISO8573.1:Class1.2.1
Extremely dry air quality classes to ISO8573.1:Class1.1.1
Super-deep dry air quality classes to ISO8573.1:Class1.1.1
Water content:
Relative humidity100%
Granule:≤0.01μm3Oil content:≤0.03mg/m
Medical gas, respiration air, film
manufacturing, valuable instrument
and equipment, cosmetic and medicine,
milk product, and wine filing ...
Water content:
2℃-10℃ PDP
Granule:≤0.01μm3Oil content:≤0.01mg/m
Water content:
-20℃--40℃ PDP
Granule:≤0.01μm3Oil content:≤0.01mg/m
Isolation of high -voltages, powder
transportation and drying, advanced
spray, processing of electric motor
components, precise pneumatic
measurement, package printing and
textile machine…
Super precise spray, electric industry,
high precise controller, aerospace , laser
mirror cooling, chemical fiber and film
manufacturing…
Water content:
-20℃--40℃ PDP
Granule:≤0.01μm3Oil content:≤0.01mg/m
Water content:
-20℃--70℃ PDP
Granule:≤0.01μm3Oil content:≤0.01mg/m
Water content:
-40℃--70℃ PDP
Granule:≤0.01μm3Oil content:≤0.01mg/m