Rpm Indicator
2
INDICATION MEMORY PROGRAMMABLE PARAMETERS OTHER Display 6 digits, 7 segment 0.56" red LED display Non volatile, Indefinite retention n Scale Factor b.no x 10 Base no (b.no.) 0.00001 to 999999 Exponent (n) -5 to 2 Reset Front Panel reset or remote reset Rate unit * PPS (hz) / RPS, PPM / RPM, PPH / RPH Minimum Rate * 0.001 to 2 PPS/RPS, 0.06 to120 PPM/RPM, 3.6 to 7200 PPH/RPH * (PPS/PPM/PPH = pulse per second / minute / hour) Resolution 1/0.1/0.01/0.001 Program lock ON/OFF Keyboard Tactile, 3 keys Enclosure construction Plug-in (circuit removable without affecting terminal wiring) Dimensions (in mm) 48(H) x 96(W) x 100(D) Mounting Panel mount Panel cutout 44 x 92 mm Supply voltage 85~265 V AC, 50/60 Hz o Operating ambient 0~50 C temperature Relative humidity Below 90%, non condensing RATE INDICATOR, TOTALISER CAT#331R1/P1/2/310311/A RCT203 SPECIFICATIONS All specifications at ambient of 25 ° C, unless specified otherwise INPUTS Input 1 Count 1 input Input 2 Count 2 input (Direction) Input types +12 V DC provided) d) Voltage pulses (5~30 V DC) Maximum input frequency 5 Khz Range limits Rate* :0.001 to 5000 PPS/RPS (for scale factor = 1) 0.06 to 300000 PPM/RPM 3.6 to 999999 PPH/RPH Totaliser : 0.000 to 999999 Accuracy Rate : ± 0.05% of reading, ± 2 counts typical Totaliser : Absolute Counting modes Up (incrementing) Down (decrementing) Bi-directional Quadrature Control inputs Gate & reset a) Proximity switch, photo electric switch ( b) Limit switch, microswitch, etc. (potential free contact closure) c) Electromagnetic pickup - 3-wire, 2-wire (optional) 0.000-999999 count range with absolute accuracy, 0.06-300000 RPM with ultra accuracy of 0.05% of reading Application : Totaliser, RPH, RPM, RPS, Meters/Minute, Mains Frequency etc. Inputs : Proximity switch, voltage pulses, Limit switch, electromagnetic pick up Counting modes : Up, down, bi-directional, qudrature • • • • • • Programmable setpoints, scale factor Measures upto 5Khz www.radix.co.in/rct.htm
-
Upload
leroy-nelson -
Category
Documents
-
view
1 -
download
0
description
RPM Indicator cum transmitter
Transcript of Rpm Indicator
INDICATION
MEMORY
PROGRAMMABLE PARAMETERS
OTHER
Display 6 digits, 7 segment 0.56"red LED display
Non volatile, Indefinite retention
nScale Factor b.no x 10 Base no (b.no.) 0.00001 to 999999 Exponent (n) -5 to 2Reset Front Panel reset or remote resetRate unit * PPS (hz) / RPS,
PPM / RPM,PPH / RPH
Minimum Rate * 0.001 to 2 PPS/RPS, 0.06 to120 PPM/RPM, 3.6 to 7200 PPH/RPH* (PPS/PPM/PPH = pulse per second / minute / hour)
Resolution 1/0.1/0.01/0.001Program lock ON/OFF
Keyboard Tactile, 3 keysEnclosure construction Plug-in (circuit removable without
affecting terminal wiring)Dimensions (in mm) 48(H) x 96(W) x 100(D)Mounting Panel mountPanel cutout 44 x 92 mmSupply voltage 85~265 V AC, 50/60 Hz
oOperating ambient 0~50 C temperature
Relative humidity Below 90%, non condensing
RATE INDICATOR, TOTALISER
CA
T#
33
1R
1/P
1/2
/31
03
11/A
RCT203
SPECIFICATIONS All specifications at ambient of 25 °C, unless specified otherwise
INPUTSInput 1 Count 1 input Input 2 Count 2 input (Direction) Input types
+12 V DC provided)
d) Voltage pulses (5~30 V DC)Maximum input frequency 5 KhzRange limits Rate* :0.001 to 5000 PPS/RPS (for scale factor = 1) 0.06 to 300000 PPM/RPM
3.6 to 999999 PPH/RPHTotaliser : 0.000 to 999999
Accuracy Rate : ± 0.05% of reading, ± 2 counts typical
Totaliser : AbsoluteCounting modes Up (incrementing)
Down (decrementing)Bi-directionalQuadrature
Control inputs Gate & reset
a) Proximity switch, photo electric switch (b) Limit switch, microswitch, etc. (potential free contact closure)c) Electromagnetic pickup - 3-wire, 2-wire (optional)
0.000-999999 count range with absolute accuracy, 0.06-300000 RPM with ultra accuracy of 0.05% of reading
Application : Totaliser, RPH, RPM, RPS, Meters/Minute, Mains Frequency etc.
Inputs : Proximity switch, voltage pulses, Limit switch, electromagnetic pick up
Counting modes : Up, down, bi-directional, qudrature
·
·
·
·
·
·
Programmable setpoints, scale factor
Measures upto 5Khz
www.radix.co.in/rct.htm
CA
T#
33
1R
1/P
2/2
/31
03
11/A
RATE INDICATOR, TOTALISER RCT203
ORDERING INFORMATIONCONNECTION DIAGRAM
STK-256
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
85~265V AC/DC VS
V+ CNT1 GND
f <5hz
CNT2 / DIR RESET GATE
11 12 13
PROX SW
BRN BLU
BLK
12 13
+
5-30 V DC
11 16 13 16 13
LIMIT SW
11 12
11 16
17
18
13
13
CNT 1
CNT 2 / DIR
RESET
GATE
SHORT
Product url : www.radix.co.in/rct.htm
OTHER PRODUCTS
PRESET COUNTER · RCT403
72x72x100
PRESET COUNTER WITH RATE INDICATOR
48x96x100 RCT205
PROGRAMMABLE RPM/RATE INDICATOR
48x96x100 RCT202
PRESET COUNTER · RCT401
72x72x100
PRESET COUNTER · RCT404
72x72x100
RPM/RATE INDICATOR WITH ALARMS · RCT206
48x96x100 · 2 RELAY & ANALOG OUTPUT
1800-22-72341800-22-radix
SALES INQUIRIES
www.radix.co.inRadix Electrosystems Pvt Ltd, B-14, 2nd Floor, Ghanshyam Indl Estate, Veera Desai Road, Andheri (West), Mumbai - 400 053, IndiaTel : + 91 22 26730101 · Fax : + 91 22 26731891 · Email : [email protected] · www.radix.co.in
AN ISO 9001:2008 COMPANY
INSTRUMENTS T : + 91 22 26730101 x 701 F : + 91 22 26731891 E : [email protected]
SENSORS T : + 91 22 26731826 x 732 F : + 91 22 66910029 E : [email protected]
GAUGES T : + 91 22 26731826 x 733 F : + 91 22 66910029 E : [email protected]
AUTOMATION C : 0-9322405471 C : E : [email protected]
ORDER CODE : 2229
Ordering Options The following ordering options are available on request.Minimum order quantity and/or minimum order value may apply.
Option Details
1.
Analog output 0~10 V DC
Supply voltage3.
4.
2.
Electromagnetic pickup 3-wire
Electromagnetic pickup 2-wire
20~35 V DC
![IA V16-4411 Lxx EN neu.ppt [Kompatibilitätsmodus] GmbH Datasheet V16.pdf1450 RPM 1250 RPM 1100 RPM 900 RPM 750 RPM 5 15 25 50 100 150 200 250 300 350 Discharge Pressure [bara] Power](https://static.fdocuments.in/doc/165x107/60ab012c0916f1699d2afa18/ia-v16-4411-lxx-en-neuppt-kompatibilittsmodus-gmbh-datasheet-v16pdf-1450-rpm.jpg)
