Royale Glitter -Interior Walls
1
Asian Paints Royale Luxury Sheen Emulsion is an exquisite emulsion paint that provides a luxurious finish and a silky glowing appearance to your walls. Asian Paints Royale Luxury Sheen Emulsion is a water-based, 100% acrylic, interior wall finish. It provides a silky sheen finish which lends a soft regal glow to the interiors of the room. It has excellent flow giving a near brush mark free finish. It also offers high stain resistance - walls painted with Royale are easy to clean and maintain that new look for years. Royale also offers good anti-fungal properties. Asian Paints Royale Luxury Sheen Emulsion is an interior wall finish that can be applied on all types of smooth plasters, false ceilings, asbestos sheets, concrete etc. Product Description ROYALE_PRODUCTINF0_SIZE: 8.25" X 11.75"_29/09/03_FRONT Performance Features & Benefits Recommended Usage ROYALE_PRODUCTINF0_SIZE: 8.25" X 11.75"_29/10/03_back For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure a drying time of 1 week before cleaning. Non-flammable Pack size availability: 1 ltr, 4 ltr, 10 ltr, 20 ltr Shade Range: As per the Colourworld Fandeck. For more information on our products and services, visit us at www.asianpaints.com, else call 1600-22-5678 (service available in select cities only) Please note that this data sheet supersedes any previous versions. a) Kindly refer to the MSDS for the Asian Paints Royale Luxury Sheen Emulsion which gives detailed information on safety measures while handling the paint. b) Store the product at ambient conditions in well ventilated locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contact, wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention if symptoms persist in both the cases. e) Use protective equipments like rubber/polythene gloves, safety goggles/glasses, face mask while handling the paint - this is required for all paints. f) In high-humidity areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc before application of the paint system. g) Do not apply when ambient temperature is less than 10° C or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking / mixing immediately after tinter addition as well as before use. Asian Paints (India) Limited, 6A, Shantinagar, Santacruz (East), Mumbai - 400 055. a) Coverage**: On smooth primed masonry surface by brushing: 1 coat: 26-30 sq mtr/ltr 2 coats: 14-16 sq mtr /ltr b) Drying Time: Surface Dry time ~ 15-25 minutes c) Gloss Levels/Sheen Levels: 8-14 on glass plate at 60° C (Silky smooth with sheen) d) Flash Point (IS 101/1987, Part 1, Sec 6): Royale is a water based paint which is not flammable. e) Stability of Thinned Paint: Use within 24 hrs. f) Shelf-life: 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. ** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness. Technical Data Precautions Post Application Instructions Pack Sizes & Shade Range Contact us Safety Features *Recoat period is quoted for 28 -30° C and 60-65% Relative Humidity, these may vary under different conditions. Spraying - Air Pressure 2.75 to 3.5 Kgs/sq cm Brush Spray Recommended Application Asian Paints Wall Primer (E1 or E2) Brush, Spray 0359 6-8 hrs Asian Paints Acrylic Wall Putty (E0) Putty Knife Sand with Emery Paper 180 and wipe clean 1354 4-6 hrs 6-8 hrs Asian Paints Wall Primer (E1 or E2) Brush, Spray 0359 Mineral Turpentine Oil (for E1) or Water (for E2) Mineral Turpentine Oil (for E1) or Water (for E2) 3-4 hrs Sand with Emery Paper 320 and wipe clean 030 Water Water As required 8-10 15-20 8-10 15-20 40-45 65-70 40-45 65-70 N.A. 30-40 20-25 30-40 20-25 30-45 22-25 30-45 22-25 3-4 hrs Asian Paints Royale Luxury Emulsion (ER) 1st Coat Brush, Roller, Spray 030 Water Asian Paints Royale Luxury Emulsion (ER) 2nd Coat Brush, Roller, Spray Apply 2 coats of Royale Luxury Emulsion for repainting and 3 coats for fresh surface painting as given below: Product Code Product Thinner Dilution % (by vol) Recoating* Period (hrs) Application Viscosity (sec) Sand the surface with Emery Paper 180 and wipe clean V. NO. 1 10/2003
description
GLITTER
Transcript of Royale Glitter -Interior Walls
Asian Paints Royale Luxury Sheen Emulsion is an exquisite emulsion paint that provides a luxurious finish and a silky glowing appearance to your walls.
Asian Paints Royale Luxury Sheen Emulsion is a water-based, 100% acrylic, interior wall finish. It provides a silky sheen finish
which lends a soft regal glow to the interiors of the room. It has excellent flow giving a near brush mark free finish. It also
offers high stain resistance - walls painted with Royale are easy to clean and maintain that new look for years. Royale also
offers good anti-fungal properties.
Asian Paints Royale Luxury Sheen Emulsion is an interior wall finish that can be applied on all types of smooth plasters, false
ceilings, asbestos sheets, concrete etc.
Product Description
ROYALE_PRODUCTINF0_SIZE: 8.25" X 11.75"_29/09/03_FRONT
Performance Features & Benefits
Recommended Usage
ROYALE_PRODUCTINF0_SIZE: 8.25" X 11.75"_29/10/03_back
For removing stains, sponge clean
with a mild soap solution and wipe
clean. Ensure a drying time of 1 week
before cleaning.
Non-flammable
Pack size availability:
1 ltr, 4 ltr, 10 ltr, 20 ltr
Shade Range:
As per the Colourworld Fandeck.
For more information on our productsand services, visit us at www.asianpaints.com, else call1600-22-5678(service available in selectcities only)Please note that this data sheet supersedes any previous versions.
a) Kindly refer to the MSDS for the Asian Paints Royale Luxury Sheen
Emulsion which gives detailed information on safety measures while
handling the paint.
b) Store the product at ambient conditions in well ventilated locations
and away from the source of ignition and fire.
c) Avoid eye and skin contact. In case of eye and skin contact, wash with
plenty of clean water.
d) Do not inhale or inject. In case of inhalation move to fresh air and seek
medical attention if symptoms persist in both the cases.
e) Use protective equipments like rubber/polythene gloves, safety
goggles/glasses, face mask while handling the paint - this is required for
all paints.
f) In high-humidity areas, use of a bio-wash solution is recommended to
remove surface fungus growth, fungal spores, mould etc before
application of the paint system.
g) Do not apply when ambient temperature is less than 10° C or if the
temperature might drop to this level within 4 hrs of application.
h) Tinted paints need thorough shaking / mixing immediately after tinter
addition as well as before use.
Asian Paints (India) Limited, 6A, Shantinagar, Santacruz (East), Mumbai - 400 055.
a) Coverage**: On smooth primed masonry surface by brushing:
1 coat: 26-30 sq mtr/ltr
2 coats: 14-16 sq mtr /ltr
b) Drying Time: Surface Dry time ~ 15-25 minutes
c) Gloss Levels/Sheen Levels: 8-14 on glass plate at 60° C (Silky smooth with sheen)
d) Flash Point (IS 101/1987, Part 1, Sec 6): Royale is a water based paint which is not flammable.
e) Stability of Thinned Paint: Use within 24 hrs.
f) Shelf-life: 3 years from date of manufacture in original tightly closed
containers away from direct sunlight and excessive heat.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness.
Technical Data
Precautions Post Application Instructions
Pack Sizes & Shade Range Contact us
Safety Features
*Recoat period is quoted for 28 -30° C and 60-65% Relative Humidity, these may vary under different conditions. Spraying - Air Pressure 2.75 to 3.5 Kgs/sq cm
Brush Spray
Recommended Application
Asian Paints Wall Primer (E1 or E2)Brush, Spray
0359 6-8 hrs
Asian Paints AcrylicWall Putty (E0)Putty Knife
Sand with Emery Paper 180 and wipe clean
1354 4-6 hrs
6-8 hrsAsian Paints WallPrimer (E1 or E2)Brush, Spray
0359
Mineral Turpentine Oil (for E1) orWater (for E2)
Mineral Turpentine Oil (for E1) orWater (for E2)
3-4 hrs
Sand with Emery Paper 320 and wipe clean
030 Water
Water Asrequired
8-1015-20
8-1015-20
40-4565-70
40-4565-70
N.A.
30-4020-25
30-4020-25
30-4522-25
30-4522-25
3-4 hrs
Asian Paints RoyaleLuxury Emulsion (ER)1st CoatBrush, Roller, Spray
030 WaterAsian Paints RoyaleLuxury Emulsion (ER)2nd CoatBrush, Roller, Spray
Apply 2 coats of Royale Luxury Emulsion for repainting and 3 coats for fresh surface painting as given below:
ProductCode
Product Thinner Dilution% (by vol)
Recoating*Period (hrs)
ApplicationViscosity (sec)
Sand the surface with Emery Paper 180 and wipe clean
V. N
O. 1
10/
2003
