OSPF Definition: Open Shortest Path First (OSPF), Is a Routing
Routing OSPF dan RIP.docx
-
Upload
aandeinstinct -
Category
Documents
-
view
6 -
download
0
description
Transcript of Routing OSPF dan RIP.docx
R1[tundra@R1] > /ip address add address=192.168.1.37/24 interface=ether1 [tundra@R1] > /ip address add address=10.10.10.1/30 interface=ether2 [tundra@R1] > /ip address add address=10.10.11.1/30 interface=ether3
[tundra@R1] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE0 192.168.1.37/24 192.168.1.0 192.168.1.255 ether1 1 10.10.10.1/30 10.10.10.0 10.10.10.3 ether2 2 10.10.11.1/30 10.10.11.0 10.10.11.3 ether3
[tundra@R1] > /ip firewall nat add action=masquerade out-interface=ether1 chain=srcnat [tundra@R1] > /ip route add gateway=192.168.1.21
[tundra@R1] > /routing ospf interface add interface=ether2 cost=10 [tundra@R1] > /routing ospf interface add interface=ether3 cost=50
[tundra@R1] > /routing ospf interface print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITY NETWORK-TYPE AUTHENTICATION AUTHENTICATION-KEY 0 ether2 10 1 broadcast none 1 ether3 50 1 broadcast none
[tundra@R1] > /routing ospf set distribute-default=always-as-type-1 redistribute-connected=as-type-1 redistribute-static=as-type-1
[tundra@R1] > /routing ospf print router-id: 0.0.0.0 distribute-default: always-as-type-1 redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: no redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20 metric-rip: 20 metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: unspecified
[tundra@R1] > /routing ospf network add network=10.10.10.0/30 area=backbone [tundra@R1] > /routing ospf network add network=10.10.11.0/30 area=backbone
[tundra@R1] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.10.0/30 backbone 1 10.10.11.0/30 backbone
R2[tundra@R2] > /ip address add address=10.10.10.2/30 interface=ether1 [tundra@R2] > /ip address add address=10.10.12.2/30 interface=ether2 [tundra@R2] > /ip address add address=10.10.13.2/30 interface=ether3
[tundra@R2] > ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 10.10.10.2/30 10.10.10.0 10.10.10.3 ether1 1 10.10.12.2/30 10.10.12.0 10.10.12.3 ether2 2 10.10.13.2/30 10.10.13.0 10.10.13.3 ether3
[tundra@R2] > /routing ospf interface add interface=ether1 cost=10 [tundra@R2] > /routing ospf interface add interface=ether2 cost=100 [tundra@R2] > /routing ospf interface print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITY NETWORK-TYPE AUTHENTICATION AUTHENTICATION-KEY 0 ether1 10 1 broadcast none 1 ether2 100 1 broadcast none
[tundra@R2] > /routing ospf set distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1 redistribute-rip=as-type-1
[tundra@R2] > /routing ospf print router-id: 0.0.0.0 distribute-default: never redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: as-type-1 redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20
metric-rip: 20 metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: unspecified
[tundra@R2] > /routing ospf network add network=10.10.10.0/30 area=backbone [tundra@R2] > /routing ospf network add network=10.10.12.0/30 area=backbone [tundra@R2] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.10.0/30 backbone 1 10.10.12.0/30 backbone
[tundra@R2] > /routing rip set distribute-default=always redistribute-static=yes redistribute-connected=yes redistribute-ospf=yes metric-static=15
[tundra@R2] > /routing rip print distribute-default: always redistribute-static: yes redistribute-connected: yes redistribute-ospf: yes redistribute-bgp: no metric-default: 1 metric-static: 15 metric-connected: 1 metric-ospf: 1 metric-bgp: 1 update-timer: 30s timeout-timer: 3m garbage-timer: 2m
[tundra@R2] > /routing rip interface add interface=ether3 [tundra@R2] > /routing rip interface print Flags: I - invalid, X - disabled, P - passive # INTERFACE SEND RECEIVE AUTHENTICATION AUTHENTICATION-KEY 0 ether3 v2 v1-2 none
[tundra@R2] > /routing rip neighbor add address=10.10.13.1 [tundra@R2] > /routing rip neighbor print Flags: X - disabled # ADDRESS 0 10.10.13.1
[tundra@R2] > /routing rip network add network=10.10.13.0/30 [tundra@R2] > /routing rip network print Flags: X - disabled # NETWORK 0 10.10.13.0/30
R3[tundra@R3] > /ip address add address=10.10.11.2/30 interface=ether1 [tundra@R3] > /ip address add address=10.10.12.1/30 interface=ether2 [tundra@R3] > /ip address add address=192.168.2.1/24 interface=ether3 [tundra@R3] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 10.10.11.2/30 10.10.11.0 10.10.11.3 ether1 1 10.10.12.1/30 10.10.12.0 10.10.12.3 ether2 2 192.168.2.1/24 192.168.2.0 192.168.2.255 ether3
[tundra@R3] > /routing ospf interface add interface=ether1 cost=50 [tundra@R3] > /routing ospf interface add interface=ether2 cost=100
[tundra@R3] > /routing ospf interface print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITY NETWORK-TYPE AUTHENTICATION AUTHENTICATION-KEY 0 ether1 50 1 broadcast none 1 ether2 100 1 broadcast none
[tundra@R3] > /routing ospf set distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1
[tundra@R3] > /routing ospf print router-id: 0.0.0.0 distribute-default: never redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: no redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20 metric-rip: 20
metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: unspecified
[tundra@R3] > /routing ospf network add network=10.10.11.0/30 area=backbone [tundra@R3] > /routing ospf network add network=10.10.12.0/30 area=backbone
[tundra@R3] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.11.0/30 backbone 1 10.10.12.0/30 backbone
R1.1[[email protected]] > /ip address add address=10.10.13.1/30 interface=ether1 [[email protected]] > /ip address add address=10.10.14.1/30 interface=ether2 [[email protected]] > /ip address add address=10.10.15.1/30 interface=ether3
[[email protected]] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 10.10.13.1/30 10.10.13.0 10.10.13.3 ether1 1 10.10.14.1/30 10.10.14.0 10.10.14.3 ether2 2 10.10.15.1/30 10.10.15.0 10.10.15.3 ether3
[[email protected]] > /routing rip set distribute-default=never redistribute-static=yes redistribute-connected=yes redistribute-ospf=yes
[[email protected]] > /routing rip print distribute-default: never redistribute-static: yes redistribute-connected: yes redistribute-ospf: yes redistribute-bgp: no metric-default: 1 metric-static: 1 metric-connected: 1 metric-ospf: 1 metric-bgp: 1 update-timer: 30s timeout-timer: 3m garbage-timer: 2m
[[email protected]] > /routing rip interface add interface=ether1
[[email protected]] > /routing rip interface print Flags: I - invalid, X - disabled, P - passive # INTERFACE SEND RECEIVE AUTHENTICATION AUTHENTICATION-KEY0 ether1 v2 v1-2 none
[[email protected]] > /routing rip neighbor add address=10.10.13.2 [[email protected]] > /routing rip neighbor print Flags: X - disabled # ADDRESS 0 10.10.13.2 [[email protected]] > /routing rip network add network=10.10.13.0/30 [[email protected]] > /routing rip network print Flags: X - disabled # NETWORK 0 10.10.13.0/30
[[email protected]] > /routing ospf interface add interface=ether2 cost=10 [[email protected]] > /routing ospf interface add interface=ether3 cost=50
[[email protected]] > /routing ospf interface printFlags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITYNET WORK-TYPE AUTHENTICATION AUTHENTICATION-KEY 0 ether2 10 1 broadcast none 1 ether3 50 1 broadcast none
[[email protected]] > /routing ospf set distribute-default=always-as-type-1 redistribute-connected=as-type-1 redistribute-static=as-type-1 redistribute-rip=as-type-1
[[email protected]] > /routing ospf print router-id: 0.0.0.0 distribute-default: always-as-type-1 redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: as-type-1 redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20 metric-rip: 20
metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: unspecified
[[email protected]] > /routing ospf area add area-id=0.0.0.1 name=area1 [[email protected]] > /routing ospf network add network=10.10.14.0/30 area=area1 [[email protected]] > /routing ospf network add network=10.10.15.0/30 area=area1
[[email protected]] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.14.0/30 area1 1 10.10.15.0/30 area1
R2.1 [[email protected]] > /ip address add address=10.10.14.2/30 interface=ether1 [[email protected]] > /ip address add address=10.10.16.1/30 interface=ether2 [[email protected]] > /ip address add address=192.168.3.1/24 interface=ether3
[[email protected]] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 10.10.14.2/30 10.10.14.0 10.10.14.3 ether1 1 10.10.16.1/30 10.10.16.0 10.10.16.3 ether2 2 192.168.3.1/24 192.168.3.0 192.168.3.255 ether3
[[email protected]] > /routing ospf interface add interface=ether1 cost=10 [[email protected]] > /routing ospf interface add interface=ether2 cost=100
[[email protected]] > /routing ospf interface print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITY NETWORK-TYPE AUTHENTICATION AUTHENTICATION-KEY 0 ether1 10 1 broadcast none 1 ether2 100 1 broadcast none
[[email protected]] > /routing ospf set distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1
[[email protected]] > /routing ospf print router-id: 0.0.0.0 distribute-default: never
redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: no redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20 metric-rip: 20 metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: unspecified
[[email protected]] > /routing ospf area add area-id=0.0.0.1 name=area1 [[email protected]] > /routing ospf network add network=10.10.14.0/30 area=area1 [[email protected]] > /routing ospf network add network=10.10.16.0/30 area=area1
[[email protected]] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.14.0/30 area1 1 10.10.16.0/30 area1
R3.1[[email protected]] > /ip address add address=10.10.15.2/30 interface=ether1 [[email protected]] > /ip address add address=10.10.16.2/30 interface=ether2
[[email protected]] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 10.10.15.2/30 10.10.15.0 10.10.15.3 ether1 1 10.10.16.2/30 10.10.16.0 10.10.16.3 ether2
[[email protected]] > /routing ospf interface add interface=ether1 cost=50 [[email protected]] > /routing ospf interface add interface=ether2 cost=100
[[email protected]] > /routing ospf interface print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITY NETWORK-TYPE AUTHENTICATION AUTHENTICATION-KEY 0 ether1 50 1 broadcast none 1 ether2 100 1 broadcast none
[[email protected]] > /routing ospf set distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1 [[email protected]] > /routing ospf print router-id: 0.0.0.0 distribute-default: never redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: no redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20 metric-rip: 20 metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: unspecified
[[email protected]] > /routing ospf area add area-id=0.0.0.1 name=area1 [[email protected]] > /routing ospf network add network=10.10.15.0/30 area=area1 [[email protected]] > /routing ospf network add network=10.10.16.0/30 area=area1
[[email protected]] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.15.0/30 area1 1 10.10.16.0/30 area1