Router Problem

26
buffer pools 0x01E8F000 ----------------------------------------------- TOTAL: 0x0208F000 Rounded IOMEM up to: 36Mb. Using 14 percent iomem. [36Mb/256Mb] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M1, REL

description

Router Problem

Transcript of Router Problem

Page 1: Router Problem

buffer pools 0x01E8F000

-----------------------------------------------

TOTAL: 0x0208F000

Rounded IOMEM up to: 36Mb.

Using 14 percent iomem. [36Mb/256Mb]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M1, REL

EASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Page 2: Router Problem

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Thu 26-Jul-12 19:34 by prod_rel_team

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

Cisco CISCO1905/K9 (revision 1.0) with 225280K/36864K bytes of memory.

Processor board ID FGL163620ED

2 Gigabit Ethernet interfaces

1 Serial(sync/async) interface

1 terminal line

DRAM configuration is 64 bits wide with parity disabled.

Page 3: Router Problem

255K bytes of non-volatile configuration memory.

249840K bytes of USB Flash usbflash0 (Read/Write)

SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!

%Software-forced reload

13:15:41 UTC Mon Apr 1 2013: Breakpoint exception, CPU signal 23, PC = 0x21B25A

D8

--------------------------------------------------------------------

Possible software fault. Upon reccurence, please collect

crashinfo, "show tech" and contact Cisco Technical Support.

--------------------------------------------------------------------

-Traceback= 0x21B1BD58z 0x21B1A0D0z 0x239F19C4z 0x25610824z 0x2386C85Cz 0x2386C9

ECz 0x2385C11Cz 0x2385C254z 0x2385C2F8z 0x2385C1ACz 0x2385C2F8z 0x2385D504z 0x23

86A074z 0x2386E0E8z 0x238487F0z 0x2388BE40z

$0 : 00000000 00000000, AT : 00000000 28740000, v0 : 00000000 00000000, v1 : 000

Page 4: Router Problem

00000 00000000

a0 : 00000000 2ACC3670, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 000

00000 00000000

t0 : 00000000 21BE5760, t1 : 00000000 50009FE1, t2 : 00000000 21B2B738, t3 : FFF

FFFFF FFFF00FF

t4 : 00000000 21B2B738, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 000

00000 00000C28

s0 : 00000000 00000000, s1 : 00000000 27F60000, s2 : 00000000 00002814, s3 : 000

00000 00002814

s4 : 00000000 238765D4, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 000

00000 00000000

t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFF

FFFFF FFFFFFFE

gp : 00000000 2874E400, sp : 00000000 294797A8, s8 : 00000000 29479810, ra : 000

00000 21B23E50

EPC : 21B25AD8, ErrorEPC : 77BBFF37, SREG : 50009FE3

MDLO : 00000FF3, MDHI : 00006000, BadVaddr : 00000000

CacheErr_Icache : 0x007F7F00 - 00007E68, CacheErr_Dcache : 0x00000000 - 00000C00

TagLo_Icache : 0x00000000 - 21B0F983, DataLo_Icache : 0x00662824 - 40856000

DataHi_Icache: 0x00000000 - 00000000

TagLo_Dcache : 0x00000000 - 2947A503, TagHi_Dcache : 0x00000000 - 08746601

DataLo_Dcache: 0x00000001 - 2112443C, DataHi_Dcache : 0x00000000 - 00000010

TEXT_START : 0x2100A658

DATA_START : 0x25633D80

Page 5: Router Problem

Cause 00000024 (Code 0x9): Breakpoint exception

13:15:41 UTC Mon Apr 1 2013: Breakpoint exception, CPU signal 23, PC = 0x21B25A

D8

--------------------------------------------------------------------

Possible software fault. Upon reccurence, please collect

crashinfo, "show tech" and contact Cisco Technical Support.

--------------------------------------------------------------------

-Traceback= 0x21B1BD58z 0x21B1A0D0z 0x239F19C4z 0x25610824z 0x2386C85Cz 0x2386C9

ECz 0x2385C11Cz 0x2385C254z 0x2385C2F8z 0x2385C1ACz 0x2385C2F8z 0x2385D504z 0x23

86A074z 0x2386E0E8z 0x238487F0z 0x2388BE40z

$0 : 00000000 00000000, AT : 00000000 28740000, v0 : 00000000 00000000, v1 : 000

00000 00000000

a0 : 00000000 2ACC3670, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 000

00000 00000000

t0 : 00000000 21BE5760, t1 : 00000000 50009FE1, t2 : 00000000 21B2B738, t3 : FFF

FFFFF FFFF00FF

t4 : 00000000 21B2B738, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 000

00000 00000C28

Page 6: Router Problem

s0 : 00000000 00000000, s1 : 00000000 27F60000, s2 : 00000000 00002814, s3 : 000

00000 00002814

s4 : 00000000 238765D4, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 000

00000 00000000

t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFF

FFFFF FFFFFFFE

gp : 00000000 2874E400, sp : 00000000 294797A8, s8 : 00000000 29479810, ra : 000

00000 21B23E50

EPC : 21B25AD8, ErrorEPC : 77BBFF37, SREG : 50009FE3

MDLO : 00000FF3, MDHI : 00006000, BadVaddr : 00000000

CacheErr_Icache : 0x007F7F00 - 00007E68, CacheErr_Dcache : 0x00000000 - 00000C00

TagLo_Icache : 0x00000000 - 21B0F983, DataLo_Icache : 0x00662824 - 40856000

DataHi_Icache: 0x00000000 - 00000000

TagLo_Dcache : 0x00000000 - 2947A503, TagHi_Dcache : 0x00000000 - 08746601

DataLo_Dcache: 0x00000001 - 2112443C, DataHi_Dcache : 0x00000000 - 00000010

TEXT_START : 0x2100A658

DATA_START : 0x25633D80

Cause 00000024 (Code 0x9): Breakpoint exception

Writing crashinfo to usbflash0:crashinfo_20130401-131541-UTC

13:15:41 UTC Mon Apr 1 2013: Breakpoint exception, CPU signal 23, PC = 0x21B25A

D8

Page 7: Router Problem

--------------------------------------------------------------------

Possible software fault. Upon reccurence, please collect

crashinfo, "show tech" and contact Cisco Technical Support.

--------------------------------------------------------------------

-Traceback= 0x21B1BD58z 0x21B1A0D0z 0x239F19C4z 0x25610824z 0x2386C85Cz 0x2386C9

ECz 0x2385C11Cz 0x2385C254z 0x2385C2F8z 0x2385C1ACz 0x2385C2F8z 0x2385D504z 0x23

86A074z 0x2386E0E8z 0x238487F0z 0x2388BE40z

$0 : 00000000 00000000, AT : 00000000 28740000, v0 : 00000000 00000000, v1 : 000

00000 00000000

a0 : 00000000 2ACC3670, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 000

00000 00000000

t0 : 00000000 21BE5760, t1 : 00000000 50009FE1, t2 : 00000000 21B2B738, t3 : FFF

FFFFF FFFF00FF

t4 : 00000000 21B2B738, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 000

00000 00000C28

s0 : 00000000 00000000, s1 : 00000000 27F60000, s2 : 00000000 00002814, s3 : 000

00000 00002814

s4 : 00000000 238765D4, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 000

00000 00000000

t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFF

FFFFF FFFFFFFE

Page 8: Router Problem

gp : 00000000 2874E400, sp : 00000000 294797A8, s8 : 00000000 29479810, ra : 000

00000 21B23E50

EPC : 21B25AD8, ErrorEPC : 77BBFF37, SREG : 50009FE3

MDLO : 00000FF3, MDHI : 00006000, BadVaddr : 00000000

CacheErr_Icache : 0x007F7F00 - 00007E68, CacheErr_Dcache : 0x00000000 - 00000C00

TagLo_Icache : 0x00000000 - 21B0F983, DataLo_Icache : 0x00662824 - 40856000

DataHi_Icache: 0x00000000 - 00000000

TagLo_Dcache : 0x00000000 - 2947A503, TagHi_Dcache : 0x00000000 - 08746601

DataLo_Dcache: 0x00000001 - 2112443C, DataHi_Dcache : 0x00000000 - 00000010

TEXT_START : 0x2100A658

DATA_START : 0x25633D80

Cause 00000024 (Code 0x9): Breakpoint exception

-Traceback= 0x21B1BD58z 0x21B1A0D0z 0x239F19C4z 0x25610824z 0x2386C85Cz 0x2386C9

ECz 0x2385C11Cz 0x2385C254z 0x2385C2F8z 0x2385C1ACz 0x2385C2F8z 0x2385D504z 0x23

86A074z 0x2386E0E8z 0x238487F0z 0x2388BE40z

=== Flushing messages (13:15:55 UTC Mon Apr 1 2013) ===

Buffered messages:

Queued messages:

*Apr 1 13:15:55.511: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console d

ebugging output.

Page 9: Router Problem

*Jan 2 00:00:03.323: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module nam

e = c1900 Next reboot level = ipbasek9 and License = ipbasek9

*Apr 1 13:15:11.731: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-ta

ble No such file or directory

*Apr 1 13:15:11.735: c3600_scp_set_dstaddr2_idb(184)add = 80 name is Embedded-S

ervice-Engine0/0

*Apr 1 13:15:27.327: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed stat

e to down

*Apr 1 13:15:27.327: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed stat

e to down

*Apr 1 13:15:27.327: %LINK-3-UPDOWN: Interface Serial0/0/0, changed state to do

wn

*Apr 1 13:15:28.327: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0/0, changed state to down

*Apr 1 13:15:28.327: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0/1, changed state to down

*Apr 1 13:15:28.327: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/

0, changed state to down

*Apr 1 13:15:33.079: %USBFLASH-5-CHANGE: usbflash0 has been inserted!

*Apr 1 13:15:36.403: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, chan

ged state to up

*Apr 1 13:15:37.387: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, cha

nged state to administratively down

*Apr 1 13:15:38.387: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-S

Page 10: Router Problem

ervice-Engine0/0, changed state to down

*Apr 1 13:15:41.775: %SYS-2-MALLOCFAIL: Memory allocation of 10260 bytes failed

from 0x238765D4, alignment 0

Pool: Processor Free: 2004 Cause: Not enough free memory

Alternate Pool: None Free: 0 Cause: No Alternate pool

-Process= "Init", ipl= 0, pid= 3

-Traceback= 239F19C4z 25610824z 2386C85Cz 2386C9ECz 2385C11Cz 2385C254z 2385C2F8

z 2385C1ACz 2385C2F8z 2385D504z 2386A074z 2386E0E8z 238487F0z 2388BE40z 2388C1F8

z 238C9B00z

No warm reboot Storage

*** System received a Software forced crash ***

signal= 0x17, code= 0x24, context= 0x28c5f34c

PC = 0x21b25ad8, SP = 0x294797a8, RA = 0x21b23e50

Cause Reg = 0x00000024, Status Reg = 0x50009fe3

System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2011 by cisco Systems, Inc.

Total memory size = 256 MB

CISCO1905/K9 platform with 262144 Kbytes of main memory

Main memory is configured to 64 bit mode with ECC disabled

Readonly ROMMON initialized

Page 11: Router Problem

program load complete, entry point: 0x80903000, size: 0x4c4a0

program load complete, entry point: 0x80903000, size: 0x4c4a0

IOS Image Load Test

___________________

Digitally Signed Release Software

program load complete, entry point: 0x81000000, size: 0x40d8d14

Self decompressing the image : #################################################

################################################################################

################################################################################

################################################################################

################################################################################

############## [OK]

Smart Init is enabled

smart init is sizing iomem

TYPE MEMORY_REQ

HWIC Slot 0 0x00200000

Onboard devices &

buffer pools 0x01E8F000

-----------------------------------------------

TOTAL: 0x0208F000

Rounded IOMEM up to: 36Mb.

Page 12: Router Problem

Using 14 percent iomem. [36Mb/256Mb]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M1, REL

EASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Thu 26-Jul-12 19:34 by prod_rel_team

This product contains cryptographic features and is subject to United

Page 13: Router Problem

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

Cisco CISCO1905/K9 (revision 1.0) with 225280K/36864K bytes of memory.

Processor board ID FGL163620ED

2 Gigabit Ethernet interfaces

1 Serial(sync/async) interface

1 terminal line

DRAM configuration is 64 bits wide with parity disabled.

255K bytes of non-volatile configuration memory.

249840K bytes of USB Flash usbflash0 (Read/Write)

SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!

Page 14: Router Problem

%Software-forced reload

13:18:58 UTC Mon Apr 1 2013: Breakpoint exception, CPU signal 23, PC = 0x21B1EA

38

--------------------------------------------------------------------

Possible software fault. Upon reccurence, please collect

crashinfo, "show tech" and contact Cisco Technical Support.

--------------------------------------------------------------------

-Traceback= 0x21B1BD58z 0x21B1A0D0z 0x239F19C4z 0x25610824z 0x2386C85Cz 0x2386C9

ECz 0x2385C11Cz 0x2385C20Cz 0x2385C2F8z 0x2385C1ACz 0x2385C2F8z 0x2385D504z 0x23

86A074z 0x2386E0E8z 0x238487F0z 0x2388BE40z

$0 : 00000000 00000000, AT : 00000000 28740000, v0 : 00000000 00000000, v1 : 000

00000 00000000

a0 : 00000000 2AE4A870, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 000

00000 00000000

t0 : 00000000 21BDE6C0, t1 : 00000000 50009FE1, t2 : 00000000 21B24698, t3 : FFF

FFFFF FFFF00FF

Page 15: Router Problem

t4 : 00000000 21B24698, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 000

00000 00000C28

s0 : 00000000 00000000, s1 : 00000000 27F60000, s2 : 00000000 00002814, s3 : 000

00000 00002814

s4 : 00000000 2386F534, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 000

00000 00000000

t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFF

FFFFF FFFFFFFE

gp : 00000000 28747360, sp : 00000000 296009B0, s8 : 00000000 29600A18, ra : 000

00000 21B1CDB0

EPC : 21B1EA38, ErrorEPC : 80405B7C, SREG : 50009FE3

MDLO : 00000FA6, MDHI : 00004000, BadVaddr : 00000000

CacheErr_Icache : 0x007F7F00 - 00007E68, CacheErr_Dcache : 0x00000000 - 00003460

TagLo_Icache : 0x00000000 - 235BB983, DataLo_Icache : 0x10600005 - 24020001

DataHi_Icache: 0x00000000 - 00000001

TagLo_Dcache : 0x00000000 - 28743503, TagHi_Dcache : 0x00000000 - 0873F501

DataLo_Dcache: 0x00000000 - 28C5AA1C, DataHi_Dcache : 0x00000000 - 00000001

TEXT_START : 0x210035B8

DATA_START : 0x2562CCE0

Cause 00000024 (Code 0x9): Breakpoint exception

13:18:58 UTC Mon Apr 1 2013: Breakpoint exception, CPU signal 23, PC = 0x21B1EA

38

Page 16: Router Problem

--------------------------------------------------------------------

Possible software fault. Upon reccurence, please collect

crashinfo, "show tech" and contact Cisco Technical Support.

--------------------------------------------------------------------

-Traceback= 0x21B1BD58z 0x21B1A0D0z 0x239F19C4z 0x25610824z 0x2386C85Cz 0x2386C9

ECz 0x2385C11Cz 0x2385C20Cz 0x2385C2F8z 0x2385C1ACz 0x2385C2F8z 0x2385D504z 0x23

86A074z 0x2386E0E8z 0x238487F0z 0x2388BE40z

$0 : 00000000 00000000, AT : 00000000 28740000, v0 : 00000000 00000000, v1 : 000

00000 00000000

a0 : 00000000 2AE4A870, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 000

00000 00000000

t0 : 00000000 21BDE6C0, t1 : 00000000 50009FE1, t2 : 00000000 21B24698, t3 : FFF

FFFFF FFFF00FF

t4 : 00000000 21B24698, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 000

00000 00000C28

s0 : 00000000 00000000, s1 : 00000000 27F60000, s2 : 00000000 00002814, s3 : 000

00000 00002814

s4 : 00000000 2386F534, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 000

00000 00000000

t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFF

Page 17: Router Problem

FFFFF FFFFFFFE

gp : 00000000 28747360, sp : 00000000 296009B0, s8 : 00000000 29600A18, ra : 000

00000 21B1CDB0

EPC : 21B1EA38, ErrorEPC : 80405B7C, SREG : 50009FE3

MDLO : 00000FA6, MDHI : 00004000, BadVaddr : 00000000

CacheErr_Icache : 0x007F7F00 - 00007E68, CacheErr_Dcache : 0x00000000 - 00003460

TagLo_Icache : 0x00000000 - 235BB983, DataLo_Icache : 0x10600005 - 24020001

DataHi_Icache: 0x00000000 - 00000001

TagLo_Dcache : 0x00000000 - 28743503, TagHi_Dcache : 0x00000000 - 0873F501

DataLo_Dcache: 0x00000000 - 28C5AA1C, DataHi_Dcache : 0x00000000 - 00000001

TEXT_START : 0x210035B8

DATA_START : 0x2562CCE0

Cause 00000024 (Code 0x9): Breakpoint exception

Writing crashinfo to usbflash0:crashinfo_20130401-131858-UTC

13:18:58 UTC Mon Apr 1 2013: Breakpoint exception, CPU signal 23, PC = 0x21B1EA

38

--------------------------------------------------------------------

Possible software fault. Upon reccurence, please collect

crashinfo, "show tech" and contact Cisco Technical Support.

Page 18: Router Problem

--------------------------------------------------------------------

-Traceback= 0x21B1BD58z 0x21B1A0D0z 0x239F19C4z 0x25610824z 0x2386C85Cz 0x2386C9

ECz 0x2385C11Cz 0x2385C20Cz 0x2385C2F8z 0x2385C1ACz 0x2385C2F8z 0x2385D504z 0x23

86A074z 0x2386E0E8z 0x238487F0z 0x2388BE40z

$0 : 00000000 00000000, AT : 00000000 28740000, v0 : 00000000 00000000, v1 : 000

00000 00000000

a0 : 00000000 2AE4A870, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 000

00000 00000000

t0 : 00000000 21BDE6C0, t1 : 00000000 50009FE1, t2 : 00000000 21B24698, t3 : FFF

FFFFF FFFF00FF

t4 : 00000000 21B24698, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 000

00000 00000C28

s0 : 00000000 00000000, s1 : 00000000 27F60000, s2 : 00000000 00002814, s3 : 000

00000 00002814

s4 : 00000000 2386F534, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 000

00000 00000000

t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFF

FFFFF FFFFFFFE

gp : 00000000 28747360, sp : 00000000 296009B0, s8 : 00000000 29600A18, ra : 000

00000 21B1CDB0

EPC : 21B1EA38, ErrorEPC : 80405B7C, SREG : 50009FE3

MDLO : 00000FA6, MDHI : 00004000, BadVaddr : 00000000

CacheErr_Icache : 0x007F7F00 - 00007E68, CacheErr_Dcache : 0x00000000 - 00003460

Page 19: Router Problem

TagLo_Icache : 0x00000000 - 235BB983, DataLo_Icache : 0x10600005 - 24020001

DataHi_Icache: 0x00000000 - 00000001

TagLo_Dcache : 0x00000000 - 28743503, TagHi_Dcache : 0x00000000 - 0873F501

DataLo_Dcache: 0x00000000 - 28C5AA1C, DataHi_Dcache : 0x00000000 - 00000001

TEXT_START : 0x210035B8

DATA_START : 0x2562CCE0

Cause 00000024 (Code 0x9): Breakpoint exception

-Traceback= 0x21B1BD58z 0x21B1A0D0z 0x239F19C4z 0x25610824z 0x2386C85Cz 0x2386C9

ECz 0x2385C11Cz 0x2385C20Cz 0x2385C2F8z 0x2385C1ACz 0x2385C2F8z 0x2385D504z 0x23

86A074z 0x2386E0E8z 0x238487F0z 0x2388BE40z

=== Flushing messages (13:19:11 UTC Mon Apr 1 2013) ===

Buffered messages:

Queued messages:

*Apr 1 13:19:11.783: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console d

ebugging output.

*Jan 2 00:00:03.343: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module nam

e = c1900 Next reboot level = ipbasek9 and License = ipbasek9

*Apr 1 13:18:28.735: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-ta

ble No such file or directory

Page 20: Router Problem

*Apr 1 13:18:28.739: c3600_scp_set_dstaddr2_idb(184)add = 80 name is Embedded-S

ervice-Engine0/0

*Apr 1 13:18:44.267: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed stat

e to down

*Apr 1 13:18:44.267: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed stat

e to down

*Apr 1 13:18:44.267: %LINK-3-UPDOWN: Interface Serial0/0/0, changed state to do

wn

*Apr 1 13:18:45.267: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0/0, changed state to down

*Apr 1 13:18:45.267: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0/1, changed state to down

*Apr 1 13:18:45.267: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/

0, changed state to down

*Apr 1 13:18:50.019: %USBFLASH-5-CHANGE: usbflash0 has been inserted!

*Apr 1 13:18:53.343: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, chan

ged state to up

*Apr 1 13:18:54.327: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, cha

nged state to administratively down

*Apr 1 13:18:55.327: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-S

ervice-Engine0/0, changed state to down

*Apr 1 13:18:57.995: %SYS-2-MALLOCFAIL: Memory allocation of 10260 bytes failed

from 0x2386F534, alignment 0

Pool: Processor Free: 10152 Cause: Not enough free memory

Alternate Pool: None Free: 0 Cause: No Alternate pool

Page 21: Router Problem

-Process= "Init", ipl= 0, pid= 3

-Traceback= 239F19C4z 25610824z 2386C85Cz 2386C9ECz 2385C11Cz 2385C20Cz 2385C2F8

z 2385C1ACz 2385C2F8z 2385D504z 2386A074z 2386E0E8z 238487F0z 2388BE40z 2388C1F8

z 238C9B00z

No warm reboot Storage

*** System received a Software forced crash ***

signal= 0x17, code= 0x24, context= 0x28c582ac

PC = 0x21b1ea38, SP = 0x296009b0, RA = 0x21b1cdb0

Cause Reg = 0x00000024, Status Reg = 0x50009fe3

System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2011 by cisco Systems, Inc.

Total memory size = 256 MB

CISCO1905/K9 platform with 262144 Kbytes of main memory

Main memory is configured to 64 bit mode with ECC disabled

Readonly ROMMON initialized

program load complete, entry point: 0x80903000, size: 0x4c4a0

program load complete, entry point: 0x80903000, size: 0x4c4a0