Round baler guide - profi · Round baler guide Check out the specification and price details of...

Round baler guide Check out the specification and price details of round balers and baler-wrappers currently available in the UK. Our focus here is on machines capable of producing bales of a fixed diameter suitable for hay, silage and straw

Case IHModel Bale

diameterList price (fork feed)

List price (rotor feed)

List price (rotor feed + cutter)

List price (baler + wrapper)

Weight Axle Tyres (standard)

Pto drive

RB344 Rotor Feeder 1.25m — £23,586 — — 2,775kg Single 15.0/55-17 540rpmRB344 Rotor Cutter 1.25m — — £26,320 — 4,810kg Single 15.0/55-17 540rpmRB545 Rotor Cutter 1.25m — — £41,493 — 3,060kg Single 500/60-22.5 540rpmRB545 Rotor Cutter Silage Pack 1.25m — — — £73,568 4,500kg Tandem 560/45 R22.5 540rpm

Pick-up RB344 — 2.00m (DIN), four-row camtrack, roller wind guard, removable fixed guide wheels; RB545 — 2.20m (DIN), five-row camtrack, roller wind guard, removable fixed or castor (£423) guide wheelsFeed-in RB344 RF — rotor with single tines in spiral formation; RC — twin-tine spiral rotor; RB545 — twin tines in spiral pattern; Blockage solution RB344 — manual or hydraulic (£846) rotor and pick-up reverser; RB545 — hydraulic drop floor with automatic knife retraction, optional pick-up de-clutch £508Crop cutting RB344 — 15 spring-loaded serrated knives, in-cab knife engagement, manual knife selection (3, 7 or 15); RB545 — 20 spring-loaded serrated knives, in-cab knife engagement, manual knife selection (10, 10 or 20)Bale formation RB344 — base roller plus 34-bar chain and slat mechanism; three-stage bale density by spring tensioners and tailgate pressure sensing; RB545 — 18 rollers with 10-notch surface profile, spring tensioners and tailgate pressure sensors, hydraulic in-cab density control; Bale netting RB344 + RB545 — automatic net application start; front-mounted net roll plus one spare, twine + net RB344 £770, RB545 not availableBale netting RB545 — automatic net or film application, front-mounted net or film roll plus two spare, twine + net not available; Bale ejection Operator-activated tailgate, spring-loaded ramp (delete option -£516)Bale wrapping RB545 — bale transfer mechanism to wrapping table, twin overhead horizontally rotating orbital arms with 750mm film pre-stretch dispensers, storage for 10 film rolls; Controller RB344 — membrane button keypad and monochrome display; RB545 — AFS Pro 700 ISObus capable display (delete option -£1,413); balers ISObus 3 compliant; Lubrication RB344 — auto chain lube, central lubrication (delete option -£465); RB545 — auto chain lube and greasing standardOther options RB545 — tandem axle air brakes £855; 500/55x20 tyres in place of 560/45R22.5 -£2,056

ClaasModel Bale






Pto drive

Rollant 340 1.20m £20,860 — — — 2,685kg Single 11.5/80-15.3 540rpmRollant 340 Roto Feed 1.20m — £23,460 — — 2,685kg Single 15.0/55-17 540rpm

Rollant 374 Roto Feed 1.20m — £29,970 — — 2,750kg Single 15.0/55-17 1,000rpm

Rollant 374 Roto Cut 1.20m — — £34,280 — 2,750kg Single 15.0/55-17 1,000rpmRollant 375 Roto Cut 1.20m — — £36,150 — 2,750kg Single 15.0/55-17 1,000rpmRollant 375 Roto Cut Uniwrap 1.20m — — — £57,460 4,700kg Single 500/45 - 22.5 1,000rpm

Rollant 454 Roto Cut 1.20m — — £40,775 — 3,150kg Single 19.0/45-17 1,000rpmRollant 455 Roto Cut 1.20m — — £42,625 — 3,150kg Single 19.0/45-17 1,000rpm

Pick-up 340 — 1.85m, 340 RF + 374 — 2.10m (1.90m DIN), camtrack, no roller press, non-removable rigid guide wheels; 375 — adds double roller press; 374-455 — removable castor guide wheels; Feed-in Roto Feed — single tines, four per ring, arranged in a spiral; Roto Cut — 8mm double tines, four pairs per ring, arranged in a spiral; Blockage solution 340 — none; 374-455 — hydraulic drop floor automatically lowers up to 30mm in continuous use, can be fully opened to clear blockages; Crop cutting 374, 375 Roto Cut — 16 spring-loaded serrated knives, in-cab knife engagement; 454-455 Roto Cut — 25 spring-loaded serrated knives, in-cab knife engagement and four-stage knife selection (0, 12, 13, 25); Bale formation 340-454 — 16 rollers, hydraulic pressure adjustment; 455 RC — addition of Maximum Pressure System (MPS) pivoting upper three rollers for added core and outer layer density; Bale netting Auto net application, front-mounted net roll; 454 + 455 — tension control by net roll brake, twine + net £1,180-£1,315 (not available on 454 RC, 455 RC); Bale ejection 340-375 — operator-activated tailgate, spring-loaded ramp; 454 + 455 — manual or automatic tailgate operation; Bale wrapping Transfer by lift frame to forward-tilting four-belt wrapping platform, twin overhead orbital arms with 67% or optional 82% (£235) film pre-stretch dispe nsers, 12-roll storage, bale mat £420, bale tipper £2,060

72profi 4/2017 www.profi.com

Round baler guide

Claas

Controller 340-375 — operator non-ISObus terminal; 375 Uniwrap to 455 RC — ISObus compliant terminal including Claas Communicator II (delete option -£925); 375 Uniwrap — app for iPad option £1,045 (tractor requires ISObus); Lubrication auto chain lube (all except 340); 374 + 375 — mechanical central lubrication £1,120; 454 + 455 — electronic auto central lubrication £1,270, standard on 375 Uniwrap (delete option -£1,265); Other options 80mm ball hitch £425; LED lights £510; moisture sensor £635; 375 Uniwrap — dual-circuit air brakes £315

John DeereModel Bale






Pto drive

F441M Multicrop Rotoflow HC

1.25-1.35m — £34,470 — — n/a Single 11.5/80-15.3 540rpm

F441M Multicrop Maxicut HC 13

1.25-1.35m — £37,555 — — n/a Single 11.5/80-15.3 540rpm

F441M Silage Special Rotoflow HC

1.25-1.35m — — £34,470 — n/a Single 11.5/80-15.3 540rpm

F441M Silage Special Maxicut HC 13

1.25-1.35m — — £37,555 — n/a Single 11.5/80-15.3 540rpm

F441R Maxicut HC 13

1.25-1.35m — £46,048 £46,048 — n/a Single 15.0/70-18 540 or

1,000rpmF441R Maxicut HC 25

1.25-1.35m — £48,433 £48,433 — n/a Single 15.0/70-18 1,000rpm

C440R Maxicut HC 13

1.25-1.35m — £86,904 — £86,904 n/a Single or

tandem 600/55R22.5 1,000rpm

C440R Maxicut HC 25

1.25-1.35m — £89,457 — £89,457 n/a Single or

tandem 600/55R22.5 1,000rpm

Pick-up 2.00m or 2.20m, four-row camtrack, compressor shield or roller (£590) baffle, fixed or castor (£322) guide wheels; Feed-in Rotor with double-tine spiral centre section and integrated gathering augers at each end; Blockage solution Hydraulic parallel-action drop floor; optional on F441M Rotoflow (£1,001), standard on all others; Crop cutting F441R Maxicut — 13 spring-loaded serrated knives, in-cab knife engagement, no knife selection; F441R + C440R — 13 or 25 spring-loaded serrated knives, in-cab knife engagement, manual knife selection with Maxicut 25 (0, 12, 13, 25); Bale formation F441M Multicrop — seven ribbed steel rollers plus 32-bar chain and slat mechanism; F441M Silage Special — 17 ribbed rollers; F441R + C440R — 18 rollers with 12-rib profile; density control by tailgate hydraulic cylindersBale netting Manual or auto density triggered net application; net stretch regulated by roll brake; front- mounted net roll plus one spare; twine and net option — F441M, F441R + C441R not available; twine only by special requestBale ejection F441M + F441R — manual or automatic tailgate operation, optional spring-loaded ramp (n/a); C440R — automatic tailgate operation, bale drops on to four-belt wrapping table that moves clear of tailgate; Bale wrapping C440R — two overhead orbital arms carrying 750mm film dispensers; storage for 10 spare film rolls; optional bale tipper (£1,301); Controller F441M — BaleTrak Easy (net control) or BaleTrak+ (net, bale diameter etc), no ISObus; F441R + C440R — any ISObus virtual terminal, including JD Implement Display 1100 and Greenstar 1800; Lubrication F441M — auto chain lubrication optional £181; no centralised or auto greasing; F441R — auto chain lubrication and auto greasing by cartridge (standard) or reservoir with ISObus control (£1,500); Other options Hydraulic brakes £1,927, air brakes £2,653 C440R — bale drop mat (£547)

KroneModel Bale

diameterList price (no rotor)





Pto drive

Bellima F 130 1.20m £30,565 — — — 1,730kg Single 11.5/55-17 540rpm

Comprima F 125 1.20m — poa — — n/a Single or tandem 500/50-17 540rpm

Comprima F 125 XC 17 1.25m — — £41,305 — 3,200kg Single or

tandem 500/50-17 540rpm

Comprima F 125 XC 26 1.25m — — poa — 3,259kg Single or

tandem 500/50-17 540rpm

Comprima F 155 1.25-1.50m* — poa — — n/a Single or

tandem 500/50-17 540rpm

Comprima F 155 XC 17

1.25-1.50m* — — £43,080 — 3,450kg Single or

tandem 500/50-17 540rpm

Comprima F 155 XC 26

1.25-1.50m* — — poa — 3,500kg Single or

tandem 500/50-17 540rpm

Comprima CF 155 XC 17 Xtreme

1.25-1.50m* — — — £80,615 6,100kg Tandem 500/50-20 540rpm

Comprima CF 155 XC 26 Xtreme

1.25-1.50m* — — — poa 6,100kg Tandem 500/50-20 540rpm

www.profi.com73profi 4/2017

Krone

Pick-up Bellima — 1.80m (DIN), four-row camtrack, tine wind guard with baffle, rigid steel or tyre guide wheels; Comprima — 2.15m (DIN), five-row camless, roller plus baffle tined crop guard, fixed guide wheelsFeed-in Bellima — underfloor feed tines, side augers; Comprima — side gathering augers, 415mm diameter two-row spiral tine rotor; Comprima XCut — side augers, 415mm diameter three-row twin-knife chevron spiral rotorBlockage solution Bellima — none; Comprima — hydraulic drop floorCrop cutting Comprima XC — spring-loaded auto reset single-side serrated knives, manual or hydraulic (£1,420) knife engagement and selection — 17 knives (0, 8, 9, 17) or 26 knives (0, 13, 13, 26)Bale formation Bellima — ribbed base roller plus continuous chain and slat elevator, mechanically locked tailgate, mechanical bale pressure indicators for side-to-side guidance or optional audible/visual indicators; Comprima — ribbed base and two profiled rollers over intake plus continuous rubber belt and slat elevator, coil spring density control, mechanical bale pressure indicators for side-to-side guidance; F 155 — bale diameter fixed at one of six sizes in 5cm increments between 1.25m and 1.50mBale netting Bellima — manual net application or twine tying start, net stretch by tensioning bar and net roll brake, front-mounted net roll plus one spare, net + twine standard; Comprima — net or stretch film (£3,970 including camera), automatic application start, net stretch by tensioning bar and net roll brake, front-mounted net or film roll plus two spare, no twine option; Bale ejection Bellima — manual open/close; Comprima — manual or automatic tailgate open; both — spring-loaded plate bale ramp collects incoming material before tailgate closedBale wrapping CF 155 XC — pivoting frame transfers bale to chain and slat wrapping table, two overhead orbital arms carry 500mm or 750mm 50% or 70% pre-stretch film dispensers; bale drops on rubber mat, optional bale turner £1,060, storage for 10 film rolls; Controller Bellima — manual operation; Comprima — Comfort electronics and Delta II membrane switch and display terminal or any ISObus terminal including Krone CCI 200; Lubrication Bellima — manual (single chain drive); Comprima — auto chain oilingOther options Comprima — Tractor Implement Management — full automation of baler and tractor except forward power shuttle engage £550, hydraulic or air brakes £1,865, tandem axles unbraked £4,390 or braked £7,125

KubotaModel Bale






Pto drive

BF 3255 R 1.25m — £31,499 — — 2,620kg Single 15.0/55-17 540rpmBF 3255 SC-14 1.25m — — £33,305 — 2,900kg Single 15.0/55-17 540rpm

Pick-up 2.20m with inboard chain drive, five-row dual camtrack, roller crop press wind guard, fixed guide wheels within baler widthFeed-in R — spiral rotor with two rows of single tines; SC — double-tine spiral rotorBlockage solution Floor section opens front and rear hydraulically on parallelogram linkageCrop cutting SC — 14 spring-loaded serrated knives, in-cab knife engagement, no knife selectionBale formation Ribbed steel rollers hydraulic density control Bale netting Manual or auto net application; stretch regulated by net roll brake, front-mounted (chest height) net roll plus two spares, twine and net not availableBale ejection Manual or automatic tailgate open, manual close, spring-loaded bale rampBale wrapping NoneController Focus 3 non-ISObus terminalLubrication Auto chain lubrication Other options Hydraulic brakes £1,288, air brakes £1,733; 22.5in tyres in place of 17in £1,067-£1,733

KuhnModel Bale






Pto drive

FB 3130 OptiFeed 1.25m — £31,312 — — 3,300kg Single 400/60-22.5 540rpmFB 3130 OptiCut 14 1.25m — — £33,880 — 3,300kg Single 400/60-22.5 540rpmFB 3135 OptiCut 14 1.25m — — £38,222 — 3,300kg Single 400/60-22.5 540rpmFB 3135 OptiCut 23 1.25m — — £40,775 — 3,400kg Single 400/60-22.5 540rpmFB 3135 Automate OptiCut 14 1.25m — — £40,650 — 3,300kg Single 400/60-22.5 540rpm

FB 3135 Automate OptiCut 23 1.25m — — £43,203 — 3,400kg Single 400/60-22.5 540rpm

Round baler guide

KuhnFBP 3135 Automate BalePack OptiCut 14 1.25m — £65,971 — £65,971 5,600kg Tandem 400/60-22.5 540rpm

FBP 3135 Automate BalePack OptiCut 23 1.25m — — — £68,524 5,600kg Tandem 400/60-22.5 540rpm

i-BIO+ OptiCut 14 1.25m — — — £54,906 3,700kg Single 500/45-22.5 540rpmi-BIO+ OptiCut 23 1.25m — — — £57,459 3,800kg Single 500/45-22.5 540rpm

Pick-up 2.30m, five-row camtrack, short crop roller wind guard, fixed or castor pneumatic guide wheels FB — £203, FBP + i-BIO+ £236; Feed-in Rotor with double-tine spiral centre section and integrated gathering augers at each end; Blockage solution OptiFeed — hydraulic drop floor and rotor disengagement; OptiCut — hydraulic drop floor, auto knife retraction and rotor disengagement; FB 3135 Automate — automatic drop floor operationCrop cutting FB 3130 — 14 spring-loaded serrated knives, in-cab knife engagement, no knife selection; FB 3135 + FBP 3135 + i-BIO — 14 or 23 spring-loaded serrated knives, in-cab knife engagement, manual knife selection (0, 4, 7, 7, 14 or 0, 7, 11, 12, 23); Bale formation 18 ribbed steel rollers; density control by tailgate hydraulic cylinders; Bale netting FB + FBP — manual or auto density triggered net application; i-BIO+ — auto density triggered net application; net stretch regulated by roll geared to 90% of bale rotation speed; front-mounted net roll plus one spare; twine binding FB + FBP — £1,790; stretch film binding i-BIO+ £5,002; Bale ejection FB 3130 + FB 3135 — operator-activated tailgate, spring-loaded ramp; FB 3135 Automate — automatic tailgate open/close with tailgate lift height regulated by spring-loaded ramp; FB 3135 Automate BalePack — automatic tailgate open/close, bale moved to four-belt wrapping table by two transfer/anti roll-back forks; i-BIO+ — bales wrapped on bottom rollers in bale chamber, auto tailgate operation, optional bale turner; Bale wrapping FBP — two overhead orbital arms carrying 750mm film dispensers providing conventional wrapping or optional 3D wrapping of cylindrical surface then across the ends; storage for five spare film rolls; i-BIO+ — horizontal ring carrying two 70% pre-stretch 750mm film dispensers; storage for six spare film rolls; Controller FB 3130 — membrane button hand control with mono display, no ISObus; FB 3135 + FBP 3135 + i-BIO+ — Kuhn VT50 145mm colour display terminal or any ISObus virtual display including Kuhn CCI 200; Lubrication Auto chain lubrication; auto roller greasing optional £1,651 Other options Hydraulic brakes FB/FBP — £1,753, iBIO+ £1,517; air brakes iBIO+ £2,553, camera kits from £770. Note: Automate features, including automatic knife cleaning, available with manual, semi-automatic and fully automatic modes

MGX-III: Theclever all-rounderThe Kubota MGX-III has many talents– but the most impressive one is itsuncompromising reliability

Highly efficient 4-cylinder engines with provenKubota reliabilityExceptionally versatile with intelligent and userfriendly 8-speed power shift transmissionExceptional levels of comfort are provided by thelarge cab and clear arrangement of all controlsPerfectly matched with all Kubota implements andretrofit ISOBUS terminals

www.kubota.co.uk T: 01844 873156

Tough timesask for anew kind ofreliability.

www.profi.com75profi 4/2017

Lely WelgerModel Bale






Pto drive

RP 205 1.25m — £24,245 — — 3,300kg Single 11.5/80-15.3 540rpmRP 245 MasterCut 13 1.25m — — £29,535 — 3,390kg Single 11.5/80-15.3 540rpm

RP 245 XtraCut 17 1.25m — — £31,515 — 3,390kg Single 11.5/80-15.3 540rpmRP 245 Profi XtraCut

25 1.25m — — £34,270 — 3,420kg Single 11.5/80-15.3 540rpm

RPC 245 Tornado XtraCut 25 1.25m — — — £65,695 5,950kg Single 710/40-22.5 540rpm

Pick-up RP205 — 2.00m or 2.25m (£750), five-row camless, tine wind guard with optional crop press roller (2.00m £457, 2.25m £399), fixed or castor (£530) guide wheels; RP245 — 2.25m, five-row camless, crop press roller wind guard, fixed or castor (£530) guide wheelsFeed-in RP205 — undershot feed rotor with single tines in a spiral; RP245 — twin-tine spiral rotorBlockage solution RP205 — none; RP245 — flexible floor beneath intake rotor plus hydraulic floor opening with auto knife retractionCrop cutting Hydraulically-protected spring-loaded serrated knives, hydraulic knife engagement; manual or hydraulic knife selection — MasterCut 13 knives (0, 13), XtraCut 17 knives (0, 8, 9, 17), XtraCut 25 knives (0, 12, 13, 25) Bale formation 18 steel rollers with 10-rib surface profile, tailgate mechanical locks, electronic density monitoring; Balercontrol E — on-baler adjustment; E-link — remote adjustmentsBale netting Manual or with E-Link controller selectable manual/automatic net application start; front-mounted net roll plus one spare; twine + net RP205 £2080, RP245 £2070, not available on RP245 TornadoBale ejection RP205 — operator-activated tailgate, spring-loaded ramp £380; RP245 — ramp standardBale wrapping RP245 Tornado — gravity bale transfer to wrapping table, horizontal rubber roller-driven ring with two film pre-stretch dispensers, storage for 12 film rollsController RP205 + RP245 MasterCut — Balercontrol E membrane button keypad and info display; RP245 XtraCut — E-link Balercontrol; RP245 Tornado — E-link Pro membrane button keypad info, set-up and operation; balers non-ISObusLubrication RP205 — auto chain lube; RP245 — auto chain lube, central bearing lubrication standard, automatic bearing lubrication option £1,559, standard on RP245 TornadoOther options RP245 — hydraulic brakes £1,210; RP245 Tornado — hydraulic brakes standard, air brakes £850

Metal-Fach (Zetor UK)Model Bale






Pto drive

Metal-Fach Z562-0 1.20m £12,959 — — — 2,200kg Single 400/60-15.5 540rpmMetal-Fach Z562-1 Rotor 1.20m — £13,771 — — 2,300kg Single 400/60-15.5 540rpm

Metal-Fach Z562-2 Rotor Cutter 1.20m — — £14,630 — 2,400kg Single 400/60-15.5 540rpm

Metal-Fach Z562-40 Rotor Cutter 1.20m — — £15,489 — 2,400kg Single 400/60-15.5 540rpm

Pick-up 1.80m, four-row camtrack, tine wind guard, fixed guide wheelsFeed-in Z562-0 — reciprocating forks; Z562-1 + Z562-2 — twin-blade spiral rotorBlockage solution NoneCrop cutting Z562-1 — 13 spring-loaded serrated knives, manual knife engagementBale formation Z562-0/1/2 — 16 ribbed steel rollers; Z562-40 — 18 ribbed steel rollers. Hydraulic bale density control with on-baler adjustmentBale netting Twine standard, net application optional £1,030; manual net application trigger, net stretch by tensioning bar and net roll brakeBale ejection Manual tailgate operation, spring-loaded bale rampBale wrapping NoneController Metal-Fach LP-02 membrane button controller for netting start, pick-up drive, tailgate open, bale counter, etc), no ISObus; Lubrication Optional chain central lubrication £458Other options Forage treatment liquid applicator £1,059

McHaleModel Bale






Pto drive

F5400 1.25m — £29,800 — — 3,260kg Single 380/55-17 540rpmF5500 1.25m — — £36,100 — 3,500kg Single 500/50-17 540rpmF5600 1.25m — — £41,450 — 3,700kg Single 500/50-22.5 540rpmF5600 Plus 1.25m — — £46,600 — 3,850kg Single 500/50-22.5 540rpmFusion 3 1.25m — — — £61,250 5,500kg Single 560/60 R22.5 540rpmFusion 3 Plus 1.25m — — — £67,500 5,650kg Single 560/60 R22.5 540rpm


Round baler guide

NEW HOLLAND TOP SERVICE 00800 64 111 111 24/7 SUPPORT AND INFORMATION.The call is free from a land line. Check in advance with your Mobile Operator if you will be charged.

+ DENSITY 80 cm longer baler chamber delivers up to 10% denser bales

+ PRODUCTIVITY Perfect bales during longer days in hotter and drier conditions

+ EFFICIENCY IntelliCruise for ultimate bale flake uniformity and baling automation

+ DURABILITY New heavy-duty rotor option for demanding biomass operations

BIGBALER PLUS. REINFORCED BALING. UP TO 10% DENSER BALES, 100% OF THE TIME.

DISCOVER ALL THE PLUSES ONWWW.NEWHOLLAND.COM

*Performances measured in France on 26th and 27th July 2016, during a two-day field trial conducted in the presenceof an independent control body: SGS AGRI MIN (MEMBER OF SGS AGRI FOOD DIVISION OF SGS FRANCE GROUP)

for longer

New BigBaler 1290 Plus

DENSERand

STRONGERBALEto

AUTHENTICATEDPERFORMANCES*

BT

SN

ewH

olla

nd

pre

fers

lub

rica

nts

McHale

Pick-up 2.10m, five-row camtrack, galvanised reel, tine or roller crop guard, fixed guide wheelsFeed-in Side gathering augers, double-tine spiral rotorBlockage solution On-the-go flexible floor with hydraulic operation for blockage clearanceCrop cutting F5500 — 15 spring-loaded serrated knives, in-cab knife selection (0, 7, 8, 15); others — 25 spring-loaded serrated knives, in-cab knife selection (0, 12, 13, 25), knife pressure and position sensors, hydraulic auto reset knife protection, in-cab knife engagementBale formation 18 ribbed steel rollers, hydraulic bale density control with on-baler adjustment; F5600 — in-cab bale density adjustmentBale netting Manual or auto net application; Fusion 3 — net stretch by tensioning bar and net roll brake; others — net stretch regulated by adjustable pulley drive; front mounted net roll plus one spare, no twine and net; F5600 Plus + Fusion 3 Plus — apply net or stretch filmBale ejection F5400 + F5500 — manual tailgate operation, spring-loaded ramp; F5600 — auto tailgate operationBale wrapping Fusion — bale tipped on to three-belt wrapping table by tilting five-roller bottom section of bale chamber, vertical wrapping ring with two 750mm film dispensers, storage for 10 spare film rolls, wrapping table lowers before tilting to discharge wrapped bale, optional bale tipper (£1,200)Controller F5400 — Wizard (net feed, bale counter, lube level alarm); F5500 — Wizard Plus (display graphics for knife, drop floor and tailgate position, etc); F5600 — Expert Plus (auto tailgate, bale ramp sensor, net and density adjustment, etc); Fusion 3 — Expert Plus (as F5600 plus no wrapping and bale hold or drop control, etc); Fusion 3 Plus — iTouch 7in colour touch-screen terminal with wrapper camera, no ISObusLubrication Auto chain lubrication with level check alarm; F5500 + F5600 + Fusion — cartridge auto greasing with level check alarmOther options F5400 to F5600 Plus — hydraulic brakes £1,110, air brakes £1,600; Fusion — hydraulic brakes standard, air brakes £1,425

New HollandModel Bale






Pto drive

Roll Baler 125 1.25m — — £40,360 — 3,060kg Single 500/55R20 540rpmRoll Baler 125 Combi 1.25m — — — £71,038 4,800kg Tandem 500/55R20 540rpm

Roll Baler 135 Ultra 1.20-1.35m — — — £79,384 4,900kg Tandem 500/50R17 1,000 or

540rpm

Pick-up 125 — 2.30m, 135 — 2.20m, five-row camtrack, roller tined wind guard, fixed or castor removable guide wheelsFeed-in Side gathering augers, 470mm diameter double-tine spiral rotorBlockage solution Hydraulically-operated pivoting drop floor, automatic knife retraction; 125 — plus optional hydraulic rotor drive disengageCrop cutting 20 spring-loaded serrated knives, hydraulic knife engagement, automatic end-of-bale knife retraction, manual knife selection (0, 10, 10, 20); 125 Combi — plus automatic knife cleaning retraction with each bale dischargedBale formation 125 — 18 multi-rib, 135 — 18 four-rib 200mm diameter steel rollers, hydraulic bale density control with in-cab adjustmentBale netting 125 — manual or auto net application, net tensioning by roll brake, front-mounted net roll plus two spare; 125 Combi + 135 Combi — auto net or film application, net tensioning by roll brake, front-mounted net or film roll plus two spareBale ejection Manual tailgate operation, spring-loaded rampBale wrapping Bale transfers to twin-belt wrapping table, two overhead orbital arms with 500mm or 750mm pre-stretch film dispensers, wrapped bale drop off to mat, optional bale tipper; 125 — 10-roll storage, 135 — six-roll storageController 125 — any ISObus terminal, including New Holland IntelliView IV for steering guidance, auto/manual functions, density setting, documentation, etc; 135 Combi — New Holland Bale Monitor multi-function controller, no ISObus; Lubrication auto chain and roller bearing lubricationOther options n/a

PöttingerModel Bale






Pto drive

Impress 125 F Master 1.25m — — tbc — 4,750kg Single or

tandem 380/55-17 540rpm

Impress 125 F Pro 1.25m — — tbc — 4,850kg Single or tandem 500/50-17 1,000rpm

Pick-up Master — 2.05m or 2.30m, Pro — 2.30m, five-row camtrack at each end, roller press tine wind guard, 2.05m fixed or optional castor guide wheels, 2.30m castor guide wheelsFeed-in Gathering side augers, 650mm diameter seven-row twin-blade spiral rotor feeding overheadBlockage solution Hydraulic vertical-drop intake doorCrop cutting Master — 16 spring-loaded double side serrated knives, hydraulic knife engagement, manual knife selection (0, 8, 8, 16); Pro — 32 spring-loaded doubled sided serrated knives, hydraulic knife engagement, manual knife selection (0, 16, 16, 32); overhead installation with slide-out cassette service access


Round baler guide

Pöttinger

Bale formation 18 ribbed steel rollers, hydraulic bale density control with in-cab adjustmentBale netting Manual or automatic net application start by bale density, net stretch by tensioning bar and net roll brake, front-mounted net roll plus one spare, no twine optionBale ejection Manual or automatic tailgate open and open/close, spring-loaded bale rampBale wrapping NoneController Master — Select Control membrane button controller with mono display for netting start and layers, three-zone bale density, tailgate open/close, bale counter, etc, no ISObus; Pro — Power Control membrane button controller with colour display for additional features including automatic netting and tailgate operation or CCI 100 ISObus virtual terminal with colour touch-screen displayLubrication Master — auto chain oiling, manual central roller bearing greasing; Pro — auto chain oiling, manual or auto greasingOther options Hydraulic brakes, tandem axles, larger tyres

ViconModel Bale






Pto drive

RF 4325 SuperFeed 1.25m — £31,499 — — 2,840kg Single 15.0/55-17 540rpmRF 4325 SuperCut 14 1.25m — — £33,305 — 3,040kg Single 15.0/55-17 540rpmFastBale Baler-Wrapper 1.25m — — — £114,347 7,500kg Single 600/55-26.5 1,000rpm

Pick-up 2.20m with inboard chain drive, five-row dual camtrack, roller crop press wind guard, fixed guide wheels within baler widthFeed-in Superfeed — undershot feed rotor with two rows of single tines arranged in a spiral; SuperCut — twin-tine spiral rotorFeed-in FastBale — 800mm diameter double-tine spiral rotorBlockage solution Floor section opens front and rear hydraulically on parallelogram linkageCrop cutting SuperCut — 14 spring-loaded serrated knives, in-cab knife engagement, no knife selection; FastBale — 25 spring-loaded serrated knives, in-cab knife engagement, in-cab knife selection (0, 6, 12, 13, 25)Bale formation RF 4325 — 17 ribbed steel rollers, hydraulic density controlBale formation FastBale — 14-roller pre-chamber filled during net application and bale-to-wrapper transfer before crop flow and part-formed bale transfers to main 17-roller chamber (three rollers shared); electronic density monitoring with remote adjustment and hydraulic controlBale netting RF 4325 — manual or net application start; front-mounted net roll and two spares; twine and net not availableBale netting FastBale — manual or auto density triggered net application; hydraulic lifter for top-mounted net roll plus two spares; twine and net not availableBale ejection RF4325 — operator-activated tailgate, spring-loaded ramp; FastBale — gravity transfer to wrapping tableBale wrapping FastBale — twin vertically rotating 750mm pre-stretch film dispensers; storage for eight film rolls, optional bale turner £1,958Controller RF4325 — Vicon Focus button-operated colour display includes steering guidance, bale density, net quantity adjustment, bale counter; no ISObus; FastBale — IsoMatch Tellus ISObus virtual terminal, including IM Eye camera surveillanceLubrication RF4325 — auto chain lubrication; FastBale — auto chain and bearing lubricationOther options Hydraulic brakes £1,288, air brakes £1,733; 22.5in tyres in place of 17in £1,067-£1,733; FastBale — ball hitch coupling £634, 700/50-26.5 tyres £1,304

NEXT ISSUE

Don’t miss the May issue Practical test: Nine mowers – part II

To subscribe please contact us:

· Phone: +44 (0)1323 441 823

· Email: [email protected]

· Online: www.profi.com

Round baler guide - profi · Round baler guide Check out the specification and price details of...

Documents

Transcript of Round baler guide - profi · Round baler guide Check out the specification and price details of...