ROTAVATOR200 / 300 / 400

Ho

war

dR

ota

vato

r 20

0/30

0/40

0

Single speed gearbox. Selectatilth four speed gearbox. Long trailing board with specialprofile.

Lower brackets movable for tractors with cat. 1 and 2 linkage.

Rotavator 400B (Basic)The 400B is equipped with a chain(31.25mm) side drive and a single speed gearbox. It is fitted with stan-dard “L” shaped blades (9900/01) which produce a very good crumblingeffect. “C” blades can be supplied asan option. These blades require lesspower and provide a coarser finish forbetter moisture penetration. The Rota-cadet rotor can also be fitted for redu-ced fuel consumption and very effec-tive weed control.The machine can be supplied withdepth control skids or front steel wheels, according to needs. The long trailing board has a specialprofile that provides a smooth, levelsoil surface.

Rotavator 400:For professional use in vineyards, orchards and general tillage.The Rotavator 400 has been devel-oped to suit narrow tractors used invineyard and orchard applicationswith cat1 or 11 hydraulic linkages.The 400 will also fit standard trac-tors for general use. The range hasall the options required for adaption to most needs for the farmerand end user. The 400 range isavailable with gear or chain drivenside drives and single speed or“Selectaspeed” 4-speed gear-boxes.

Rotavator 400S (Super)The Super version is equipped with agear side drive, which is recommen-ded for intensive use and heavy dutyconditions. In addition, the machinecan be supplied with a double tubeconfiguration to increase overallstrength for use in extreme conditions.The 400S has the same rotor and dep-th control options as the 400B. As anoption, the machine can be suppliedwith trailing board springs to ensure aperfectly smooth finish.A further option is the “Selectatilth” 4-speed gearbox, which enables theoperator to set the rotor speed for theconditions and finish required.

R 400S-155M

R 400B

R 400S

Depth control skids. Front wheels. Optional trailing board springs. Detail of the bladed rotor.

The Rotavator 400 range is very versatile and it can be used in many different applications and conditions. Because of Its mo-dern design, with increased rotor clearance and reinforced frame, the 400 series can be used on tractors up to 57kW in hardsoils and difficult conditions. The 400 series is ideal for weed control and seed-bed preparation for vegetables, vineyards andgeneral crops.

Type Working Transport Rotor Weight Number of blades Tractor enginewidth m width m Speed rpm kg Rotavator Rotacadet KW (HP)

R400B-080M 0,80 1,02 240 18 - 18-48 (25-65)R400B-090M 0,90 1,12 255 21 - 22-48 (30-65)R400B-100M 1,00 1,22 275 24 - 22-48 (30-65)R400B-115M 1,15 1,37 295 27 - 26-48 (35-65)R400B-130M 1,30 1,52 310 30 - 29-48 (40-65)R400B-140M 1,40 1,62 219 325 33 - 29-48 (40-65)R400B-155M 1,55 1,77 340 36 - 33-48 (45-65)R400B-165M 1,65 1,87 355 39 - 33-48 (45-65)R400B-180M 1,80 2,02 375 42 40 33-48 (45-65)R400B-190M 1,90 2,12 390 45 - 37-48 (50-65)R400B-205M 2,05 2,27 405 - 44 37-48 (50-65)R400B-130S 1,30 1,52 325 30 - 29-48 (40-65)R400B-140S 1,40 1,62 340 33 - 29-48 (40-65)R400B-155S 1,55 1,77 169, 201, 355 36 - 33-48 (45-65)R400B-165S 1,65 1,87 239, 285 370 39 - 33-48 (45-65)R400B-180S 1,80 2,02 390 42 40 33-48 (45-65)R400B-190S 1,90 2,12 405 45 - 37-48 (50-65)R400B-205S 2,05 2,27 420 - 44 37-48 (50-65)

Type Working Transport Rotor Weight Number of blades Tractor enginewidth m width m Speed rpm kg Rotavator Rotacadet KW (HP)

R400S-080M 0,80 1,02 245 18 - 18-55 (25-75)R400S-090M 0,90 1,12 260 21 - 22-55 (30-75)R400S-100M 1,00 1,22 280 24 - 22-55 (30-75)R400S-115M 1,15 1,37 300 27 - 26-55 (35-75)R400S-130M 1,30 1,52 315 30 - 29-55 (40-75)R400S-140M 1,40 1,62 223 330 33 - 29-55 (40-75)R400S-155M 1,55 1,77 345 36 - 33-55 (45-75)R400S-165M 1,65 1,87 360 39 - 33-55 (45-75)R400S-180M 1,80 2,02 380 42 40 33-55 (45-75)R400S-190M 1,90 2,12 395 45 - 37-55 (50-75)R400S-205M 2,05 2,27 410 48 44 37-55 (50-75)R400S-130S 1,30 1,52 330 30 - 29-55 (40-75)R400S-140S 1,40 1,62 345 33 - 29-55 (40-75)R400S-155S 1,55 1,77 169, 201 360 36 - 33-55 (45-75)R400S-165S 1,65 1,87 239, 285 375 39 - 33-55 (45-75)R400S-180S 1,80 2,02 395 42 40 33-55 (45-75)R400S-190S 1,90 2,12 410 45 - 37-55 (50-75)R400S-205S 2,05 2,27 425 48 44 37-55 (50-75)

Rotavator 200:The best choice forcompact tractors.The Rotavator 200 has a very compactand strong design which makes it idealfor smaller tractors up to 20kW. The 200 is commonly used in garden,vegetables and orchard applications.The special rotor blade configuration ishighly effective and has a low powerrequirement..

Type Working Transport Rotor Weight Number of blades Tractor enginewidth m width m Speed rpm kg KW (HP)

200B-085 0,85 1,02 132 16 9-18 (12-25)200B-105 1,05 1,22 230 145 20 10-18 (14-25)200B-125 1,25 1,42 160 24 12-18 (16-25)

Rotavator 200-105. Specially designed for compact tractors.

Chain side drive, equipped with a 25mm chain. The rotor, fitted with 9941/2 blades is very effective.

The R300B is equipped with a chain side drive. The long trailing board provides a very smooth finish.

Rotavator 300B-125 . Good performance in gardening and general tillage.

The R300S is equipped with a gear side drive. The rotor is very efficient, and the machine is configured for cat1 tractors.

Rotavator 300: Extra capacity forsmall tractors.The Rotavator 300 is designed as areliable and long lasting machine fortractors up to 35 kW. The gearbox andside drive (chain or optional gear drive)is extremely reliable and the fixed rotorspeed of 232 rpm provides an excel-lent tilth.The machine is designed with bolt-onside plates for easy maintenance, which will be especially appreciated byoperators who work long hours.

Type Working Transport Rotor Weight Number of blades Tractor enginewidth m width m Speed rpm kg KW (HP)

R300B-090 0,90 1,07 158 21 11-29 (15-40)R300B-100 1,00 1,15 166 24 11-29 (15-40)R300B-115 1,15 1,30 174 27 15-29 (20-40)R300B-125 1,25 1,40 232 182 30 18-29 (25-40)R300B-140 1,40 1,55 190 33 18-29 (25-40)R300B-150 1,50 1,68 198 36 22-29 (30-40)R300B-180 1,80 1,95 206 39 26-29 (35-40)

Type Working Transport Rotor Weight Number of blades Tractor enginewidth m width m Speed rpm kg KW (HP)

R300S-090 0,90 1,07 193 21 11-33 (15-45)R300S-100 1,00 1,15 198 24 11-33 (15-45)R300S-115 1,15 1,30 203 27 15-33 (20-45)R300S-125 1,25 1,40 232 208 30 18-33 (25-45)R300S-140 1,40 1,55 213 33 22-33 (30-45)R300S-150 1,50 1,68 218 36 26-33 (35-45)R300S-180 1,80 1,95 223 39 26-33 (35-45)

1010

0219

6 EX

P/G

B/A

ustr

alia

/R 2

00-3

00-4

00/B

RO

/090

4Ja

nner

up o

ffset

a/s

Rotavator and Rotalabour.The benefit to the farmer is experience and high technology.

The Rotavator was invented by Mr A.C. Howard in 1922.

The highest technology has been applied to the Rotavator range.

Howard Rotavator 400.

Take advantage of the original Rotavator. Howard, during the years, has invested heavily in the Rotavaror programme and as a result there are thousands of satisfied farmers around the world. As needs change thereare many different applications requiring a Rotavator. Howard offers the most complete range, with many different options and configurations, in order to match any demand from the market.

Only high quality materials and modern procedures are used in the production of Rotavators, making forextremely reliable machines, capable of working in the most difficult conditions.

Sub

ject

t t

o m

odifi

catio

n

Howard Australia Pty Ltd.167 Prospect HighwaySeven HillsNSW 2147Tel. (61) 02 9674 2966Fax (61) 02 9674 6263