ROTALIGN® PROThe ultimate in laser shaft alignment

Advanced Test Equipment Rentalswww.atecorp.com 800-404-ATEC (2832)

®

Established 1981

As maintenance technicians’ jobresponsibilities grow more varied,so does the need for an alignmentsystem to do more. Most systemscan deal with horizontal and verti-cal machinery and measure softfoot. Some can measure misalign-ment uncoupled – but the newROTALIGN® PRO does much more.It lets you align machine trains ofup to six machines, calculating

which machine feet to move inorder to reduce work to a mini-mum. It not only measures softfoot but also analyzes it and sug-gests corrective action. It can evencompute thermal growth for you.But ROTALIGN® PRO does not stopat the alignment of rotating ma-chines: it also features an optionalprogram for accurate single-passstraightness measurement.

Taking professional alignment to a higher lev

Precise a

Intrinsicsafety

optional

velExpertise for everyone

alignment pays for itself!

ROTALIGN® PROdoes it all!

Reduces bearing and seal damage

Minimizes energy loss

Cuts production downtime

ROTALIGN® PRO makes quick, ac-curate shaft alignment simple fornew users, yet offers experts thefunctions they need in order tomaster special challenges such asmachine trains and cardan shafts,flange-mounted machines andnonrotatable shafts – all just a fewkeystrokes away.

Aligns horizontal &vertical machines!

Aligns coupled &uncoupled shafts!

Rotate shaftsonly a quarter-turnin any position!

Machine trainalignment!

Built-in soft footexpertise!

Thermal growthcomputation!

Cordlessmeasurement!

Cardan shaftalignment!

Measure straight-ness with ease!

Take Commandwith PC software!

Defineany machine inrecord time!1

Automaticmeasurement withtotal control

2

3-key alignment:Quicker, easier, more flexible

Measures all by itself!Simply adjust the laser beam, thenrotate the shafts to begin measure-ment: in less than a quarter-turn,ROTALIGN® PRO automatically reg-isters enough points to determinealignment accurately.

Quick and easy setupThe job setup screen gets you upand running quickly with a clear,yet detailed diagram of the ma-chines to be aligned. The samescreen also lets you add machinesto new or existing trains, specifycoupling types and dimensions,RPM, amount of thermal growthand much more!

Flange-mounted machines:a breeze to align!Precise alignment of verticalmachines and horizontalflange-mounted machines wasnever this easy! ROTALIGN®

PRO shows shimming correc-tions for each flange bolt andlets you monitor lateral posi-tioning 'live' on screen as well.

No machinetoo ‘exotic’

3Alignment resultsin theirmost usable form

The whole pictureat a glanceROTALIGN® PRO shows you thecomplete alignment condition ina single clear screen: couplingmisalignment, machine foot cor-rections, even tolerance com-pliance indicated by 'happy faces'for horizontal and vertical planes.

Ultimatealignment convenience

Traceable results,step by step!The enhanced alignment histo-ry capability of ROTALIGN®

PRO lets you document everystep of the entire alignmentjob (e.g. ‘as found,’ ‘as left’etc.) for ISO-compliant trace-ability.

Selectamong realistic machines!Choose machine types and de-tailed diagrams from a 'realmachine graphics' library tocustomize setup of your align-ment jobs: saves time, speedsidentification of your machinesand makes your reports moreprofessional.

Machine templatessave setup time!Save setup time with pre-defined machine configura-tions including machine types/names, identification tags, di-mensions, tolerances, targetsetc. Simply select a ready-made default template or cre-ate your own from any align-ment file!

The right bracketsfor all your machines

Shafts can't be rotated? No prob-lem with ROTALIGN® PRO! Simplyplace the ALI 2.230 magnetic slid-ing bracket onto the couplingflange or shaft end and slide itaround the circumference to takemeasurements in seconds. Suitablefor shaft/coupling diameters fromapprox. 80 mm (3 1/8") on up.

Instant mounting on any ferromag-netic surface: just place the time-saving ALI 2.112 compact magnet-ic brackets onto coupling flangesor shaft faces and you're all set!Powerful magnets hold sensors rig-idly in place for measurement, yetallow extremely easy, flexible ad-justment.

Quite possibly the only bracketyou'll ever need: the standardROTALIGN® PRO compact chain-type bracket ALI 2.891set uses in-terchangeable parts to fit ontoshafts and solid couplings rangingfrom 15 mm to 500 mm (5/8" to20") in diameter in a matter ofseconds!

Alignment advantagesthrough technology

PRO as in ‘protection’ROTALIGN® PRO means industrial-strength alignment: its shockproof,IP67 rubberized components re-main unaffected by water spray,grime and solvents, while the rug-ged flat keyboard gives a positiveresponse even through heavy workgloves. The lockable flight case(shown here in optional matte alu-minum) keeps all standard systemcomponents and frequently-usedaccessories in perfect order.

Beforelinearization

Afterlinearization

High-precision detectorgives unparalleled accuracyEven the best commercially-avail-able position detectors are nomatch for those linearized by theunique PRÜFTECHNIK AG process:each individual detector undergoesa complex mathematical optimiza-tion procedure to give exceptionalaccuracy over a large measurementarea. This enables you to performalignment reliably at separations of10 m (33 ft.) and beyond!

Ultimate flexibility: Measurein a quarter-turn or less!Two built-in electronic inclinome-ters continuously keep track of theshaft rotation angle for eachmeasurement of laser beam posi-tion. This ensures that alignmentcorrections are calculated preciselyfor vertical and horizontal direc-tions, and thanks to the patentedmeasurement techniques, you caneven measure

• in one continuous sweep!• in less than 1/4 turn!• in either direction!• from any starting position!

The timesaving PC partner:ROTALIGN® PRO Commander

ROTALIGN® PRO Commander soft-ware saves alignment time at thejob site by giving you completecontrol with the point-and-clickease of Windows™ 95 or NT! Dis-play and store alignment results,customize the ROTALIGN® PROcomputer and specify all aspects ofthe machines to be measured. De-fine machine templates, even forentire trains of up to six machinesin one file. Select among alignmenttolerance tables or modify them tosuit your particular circumstances.Machine definitions and measure-ment results are logically organizedby plant, area and machine train oraggregate.

PC support: before, during & after

Built-in soft foot expertise!The new Soft Foot Wizard (patentpending) helps you resolve difficultmachine frame distortion problemson the spot. One soft foot, twosoft feet, rough adjustment of se-vere soft foot, or induced soft footfrom piping strain or severe mis-alignment: the Soft Foot Wizardrecognizes such situations andgives you expert recommendationson how to handle them.

Cardan shaft alignment!ROTALIGN® PRO handles this spe-cial alignment challenge with ease,thanks to new, specially-designedlarge-offset brackets (ALI 2.893SEToption).

Machine train alignment!ROTALIGN® PRO handles trains ofup to 6 machines (5 couplings),complete with specific tolerances,targets, names and icons for eachmachine. Machine trains can havehorizontal or vertical shafts, with orwithout flange-mounted (C-face)machines!

Alignment power for any situation

Thermal growthcomputation!No specs available for compensa-tion of thermal effects? LetROTALIGN® PRO compute thermalgrowth based on temperaturechange, machine geometry andmaterial coefficient of thermal ex-pansion - even when machinestructural components are made ofdifferent materials!

Straightness measurementwith ease!Now measure straightness (verticaland horizontal) of ways, beds andother applications, far more quicklyand accurately than with conven-tional taut wires, theodolites oreven other laser methods. Optionalstraightness module ALI 3.630SETincludes adjustable brackets that fita wide range of workpieces.

Straightforward resultsROTALIGN® PRO shows you verticaland horizontal offsets at a glance,based upon optimized correctionvalues or your choice of stationarypoints – and guides you throughcorrections 'live' on screen as wellin both horizontal and vertical di-rections at the same time.

Advanced design featuresmean fast, accurate resultsROTALIGN® PRO measures align-ment by tracking to the nearest1/1000 mm laser beam displace-ment over the surface of a positiondetector as the shafts are turned.The more accurately this measure-ment is made, the more reliablethe alignment corrections will be.And accuracy is enhanced by fea-tures like dual inclinometers and aquadruple-axis position detectorwith ultra-precise linearization.

Cordless measurement!No more cable to constantly dis-connect and reconnect when largeshafts require use of turning gearsfor measurement rotation or in“hot” (radiation) areas. The op-tional infrared data transmissionlink ALI 4.609SET is invaluable forpassing alignment readings fromthe measurement receiver to theROTALIGN® PRO computer, reliablyand with no cable connections.

MAINMAIN

.......BATT...............BATT........ ...................... ......................

AUXAUX CHARGECHARGESLEEPSLEEP

MENU

CLR

ONOFF

DIMM

ENTER

ROTALIGN-SENSOR-D 5093

5364

-JTU65

5364

-JTU65

5364

-JTU65

5364

-JTU65

5364

-JTU65

5364

-JTU65

5364

-JTU65

5364

-JTU65

746

88HE

746

88HE

536472MG

-JTU65645

958

5364

72M

G-J

TU65

645

H53

889

57.9

94.7

456

2836

6428

3664

2836

64

2836

6428

3664

2836

64

2836

64

2836

64

2836

64

2836

64

2836

64

85746 85746

HU467638267NVHR-6647

536472MG-JTU65645

6453

536472MG

-JTU65645

H53 889

536472MG

-JTU65645

H53 889

HU467638267NVHR

12587 HFZR66453 WIIEU857 746525547 - 558 - 87

536472MG

-JTU65645

95774

85746

5364

-JTU65

ROTALIGN-SENSOR-D 5093

5364

-JTU65

5364

-JTU65

5364

-JTU655364

-JTU65

5364

-JTU65

746

88HE

746

88HE

746

88HE

57.9

94.7

456

5364

-JTU65

2836

64

2836

64

2836

64

2836

64

2836

64

2836

64

2836

64

2836

64

2836

64

2836

64

2836

64

2836

64

2836

64

85746

85746

8574685746

746

88HE

2836

64

5364

-JTU65

2836

64

5364

-JTU65

Productive maintenance technology

PRÜFTECHNIK AGP.O. Box 12 63D-85730 Ismaning, Germanywww.pruftechnik.comPhone: (+49) 89 99 61 60Fax: (+49) 89 99 61 62 00eMail: info@pruftechnik.com

Printed in Germany ALI 9.642.09.99.10LUDROTALIGN® is a registered trademark of PRÜFTECHNIK Di-eter Busch AG. No copying or reproduction of this informa-tion, in any form whatsoever, may be undertaken withoutexpress written permission of PRÜFTECHNIK AG. The infor-mation contained in this leaflet is subject to change withoutfurther notice due to the PRÜFTECHNIK policy of continuousproduct development. PRÜFTECHNIK products are the sub-ject of patents granted or pending throughout the world.© Copyright 1998 by PRÜFTECHNIK AG.

The world of lasershaft alignment and moreThe PRÜFTECHNIK Laser AlignmentProduct Catalog provides details on allstandard systems and a full range ofaccessories designed to make for fast-er, easier and more accurate align-ment in just about any situation.Ask for your free copy today!

Product Catalog1998/99

Laser-AusrichtsystemeLaser Alignment SystemsSystèmes d'alignement

Calibration checking traceableto your national standardsAll measurement systems need peri-odic verification of accuracy to ensurereliability of results; ISO standardseven require it. ROTALIGN® PRO cali-bration can be traced at any time tonational or international norms suchas ISO 9000.

ISO 9001

ROTALIGN® PRO Technical data

Laser emitterLaser GaAlAs semiconductor laserWavelength 675 nm (typical)Beam diameter 5 mmBeam divergence < 0.3 mradBeam power < 1 mWLaser safety class Class 2; FDA 21CFR 1000 and 1040Safety precautions Do not look into laser beam.Power supply 9V block battery,

IEC 6LR61 (alkaline or lithium)Operating time, 80 hours,continuous depending upon battery typeTemperature range 32°F -140°F (0°C - 60°C)Weight Approx. 5.8 oz. (165 g)

Laser receiverDirections of 5-axis 2 planes (4 displacement axes)detector measurement 1 inclination 360° (angle to plumb)Two detector areas 0.7" x 0.7" (18 mm x 18 mm) eachSeparation betweenmeasurement planes Approx. 6 1/4" (160 mm)Resolution 0.04 mil (1 µm) ; angular 10 µRadError < 2%Error rotation angle < 2°Measurement rate Approx. 20 HzTemperature range 32°F -140°F (0°C - 60°C)Weight Approx. 6.7 oz. (190 g)

Laser emitter/receiverMax. measurementseparation betweenemitter and receiver 33 ft. (10 m)Measurement stability Ensured by temperature-stabilized

light metal housingEnvironmental Shockproof, waterproof, dustproofprotection (IP 67)Protection fromambient light YesDimensions, W x H x D Approx. 4 1/8" x 2 5/8" x 1 7/8"

(105 x 67 x 47 mm)

ComputerLCD screen 2 3/8" x 3 3/4" (60 x 95 mm),

200 x 320 pixels, with contrast controlLED indicators Main battery low, auxiliary battery

low, battery charging, 'sleep' modePower conservation 'Sleep' mode blanks screen, inter-

rupts measurement after user-definedperiod of nonuse; automatic shutoffafter a further user-defined period

Keyboard 6 variable-function keys (soft keys)20 fixed-function keys (hard keys)

External interface RS-232C (serial) and parallel printerinterface for graphics or text reportsand instant screen dumps.

Memory Nonvolatile 4MB PCMCIA card, storesover 1000 measurement sets withlabels, comments etc.

Power supply 6x 1.5V (IEC LR 14) Size "C"(alkaline standard,NiCad rechargeable optional)Optional: Lithium-Ion batteryrechargeable by computerOptional: ALI 3.576 mains adapterfor 110V/220V (switchable),output 400 mA min. at 12V ± 5%

Auxiliary battery 9V block (IEC 6LR61),provides 20 - 40 min. operation

Backup battery Lithium (laser welded type),maintains data memory for 5 years

Operating time, 50 hours (alkaline batteries)computer/receiver1 25 hours (NiCad batteries)

10 hours (Lithium-Ion battery pack)Environmental Waterproof, dustproof,protection shockproof (IP67)Operating temperature 32° F - 113° F (0° C - 45° C)Dimensions, W x H x D Approx. 8 1/4" x 9 1/2" x 2 3/4"

(210 x 240 x 70 mm)Weight with battery Approx. 3.8 lb. (1.75 kg)

Carrying caseStandard ABS, drop tested (6 1/2 ft./ 2 m)Optional Aluminum shell

Both cases feature 2 key locksand 1 combination lock.

Case dimensions, Approx. 21 5/8" x 15" x 8 1/8"W x H x D (550 x 380 x 205 mm)Weight, includingall standard parts Approx. 24.6 lb. (11.2 kg)

OptionsNon-contact IR data transmission from receiver to computerMax. range Approx. 26 ft. (8 m), depending upon

surrounding conditions.

Intrinsic safety EEx ib IIC T4Approx. U.S. equivalent: NEC Article500-4, Class 1, Division 1, groupsD,C,B,A and special safeguards T4

ROTALIGN®PRO Commander PC software ALI 3.592SET lets you:• Back up and restore machine alignment data files

under Microsoft Windows• Issue alignment reports• Display alignment results• Configure the ROTALIGN®PRO computer• Define machine templates for quick setup

1 Based upon an operating cycle of25% measurement25% computation and50% 'sleep' mode

LUDECA Inc.1425 N.W. 88th AvenueMiami, FL 33172Phone: (305) 591-8935Fax: (305) 591-1537http://www.ludeca.comeMail: info@ludeca.com