®

Room Controller

2

Our Distributed Controls Solutions

Dialog Room Controllers

Field Deployable Controls - Less wires & ease of installationDialog® Room Controller is a versatile solution for stand-alone or networked lighting control applications. Douglas Lighting Controls® brings industry leading controls experience to provide you with the flexibility, value, and engineering expertise that you demand. The Dialog Room Controller, manages classrooms, offices, conference rooms or small rooms to meet local and national lighting codes such as ASHRAE 90.1 (2016), California Title 24 (2020 and IECC 2018).

The Dialog Room Controller has two components – the Room Controller and the UL924 Relay Expansion Pack. The Room Controller is the main device, which includes two or four relays, two or four independent dimming channels and connectivity to a Douglas Lighting Controls Dialog or BACnet network. The Relay Expansion Pack provides two additional relays that are certified for emergency lighting operation or can be used for additional lighting loads. It can be easily added by clipping it to the bottom of the room controller and connecting to the appropriate loads.

• Configured “kits” for specific room design and lighting control• Plug ‘N Control up to 12 different loads (lighting, receptacle, emergency lighting)• Plug ‘N Control up to 12 dimming channels independent of lighting loads• Wiring verification via manual control buttons• On-device color coded labels and wiring instructions• Installation directly to junction box• Low cost, simple to install, polarity neutral 2-wire network• Networkable with Dialog or BACnet IP• UL and CSA certified• UL924 certified for emergency lighting

FEATURESCIRCUIT TEST BUTTONSRJ45 PORT FOR BACNET

IP CONNECTIVITYSTATUS & LOCATOR LED LABELED LOW VOLTAGE WIRING COMPARTMENT

EASY BREAK WIRING KNOCKOUTS

& ACCESS TABS

PUSH-CONNECT DIMMING AND DATA

TERMINALSWIRE COLOR MATCHING RELAY LABELS WIRING INSTRUCTIONS½ INCH CHASE NIPPLES

½ INCH CHASE NIPPLES

COLOR CODED WIRESCLIP CONNECT RELAY

EXPANSION/UL924 EMERGENCY

LIGHTING PACK

ASHRAE 90.1 Compliant

California

Compliant24TITLE

- - -

- -

- -

- - -

- - - - - - - - - - - - - - -

3

Easy InstallationDialog Room Controller is designed for easy installation with simple no polarity 2 wire control wiring. The units are available in pre-configured “rooms” that arrive to you fully commissioned – just Plug ‘N Control™ your room! Kits can include the Room Controller, the UL924 Expansion Pack, occupancy/vacancy sensors, daylight sensors, and switch stations based on the application. The Dialog Room Controller can also be used in a centralized Dialog system to create a globally controlled network that is faster to install, requires less long wire/conduit runs, and provides room-by-room testing before complete system start-up. All wires and connectors are color coded for quick identification and time saving completion of the installation.

For product ordering information please see website.

2.1” (54mm)

6.1” (155mm)

4.3” (109mm)

5.7”(144mm)

6.3”(159mm) WEIGHT 1.15lbs (0.52kg)

DIMENSIONS

SIMPLEINSTALLATION• Configured “kits” for Plug ‘N

Control right out of the box• ½” chase nipples for junction

box installation• Color coded line voltage wires• Color coded labels that match

wire colors• Push-connect low voltage

terminal blocks• Factory programmed for out-

of-the-box Plug ‘N Control™ • Polarity neutral, 2-wire

(#18AWG) low voltage network

4.0 EMERGENCY + RECEPTACLE INSTALLATIONDaylight Sensor

2-Wire Network

Occupancy Sensor Wall SwitchesLoads

Dimming Zone 1

Dimming Zone 2

Dimming Zone 3

Dimming Zone 4EM1

EM2

3

2

1

Line Voltage (receptacle)Line Voltage (lights)

Neutral not shown - these illustrations are for reference purposes only. For site installations, please review Kit wiring diagrams and follow local and national electrical codes.

4

ApplicationsDialog Room Controller is designed for easy installation with simple no polarity 2 wire control wiring. The units are available in pre-confgured “rooms” that arrive to you fully commissioned – just Plug ‘N Control™ your room! Kits can include the Room Controller, the UL924 Expansion Pack, occupancy/vacancy sensors, daylight sensors, and switch stations based on the application.

The Dialog Room Controller can also be used in a centralized Dialog system to create a globally controlled network that is faster to install, requires less long wire/conduit runs, and provides room-by-room testing before complete system start-up. All wires and connectors are color coded for quick identification and time saving completion of the installation.

Both the 2-Pole (WRC-4222) and the 4-pole (WRC-4244) version of the room controller allows for configurations via a PC application to enable the addition of room controllers connected to the downstream of a main controller.

WRC-4244 WRC-4244 + WUL-4924

WRC-4222 WRC-4222 + WUL-4924

ASHRAE 90.1 Compliant

California

Compliant24TITLE

- - -

- -

- -

- - -

- - - - - - - - - - - - - - -

5

• Lighting control (including emergency lighting)

• Receptacle control• Closed loop dimming• Manual control• Control up to twelve loads

(lights, receptacle, emergency lights)

• Control up to twelve 0-10v dimming zones (independent of light zones)

• Demand response ready• Programmable with a device

specific desktop application via Ethernet.

• Native BACnet• Daylighting Dim-to-OFF• Up to 4 daylight sensors each

with thier own Primary and Secondary control.

Occupancy/Vacancy Sensor

Occupancy/Vacancy Sensor

Occupancy/Vacancy Sensor

Daylight Sensor

Master Station

Dialog Room Contoller

Dialog Room Contoller

Dialog Room Contoller

ADVANCED STAND-ALONE CAPABILITIES: CAFETERIAFUNCTIONALITY

• Lighting control (including emergency lighting)

• Receptacle control• Closed loop dimming• Manual control• Control from 2 to 6 loads

(lights, receptacle, emergency lights)

• Control from 2 to 4 0-10v dimming zones (independent of light zones)

• Demand response ready• Daylighting Dim-to-OFF

FUNCTIONALITY

Occupancy/Vacancy Sensor

Daylight Sensor

Entry Station

Teacher Station

Dialog Room Contoller

NATURAL LIGHT

STAND-ALONE ARCHITECTURE: Classroom example

6

The “DRC Configuration Application” allows the owner to connect to a WRC-4244 or WRC-4222 to adjust the parameters of the rooms switch groups, scenes, and daylight harvesting settings with a simple user-friendly interface. These configurations can apply to all 12 relays and dimmers connected to the main room controller. When rooms are duplicated, a copy-and-paste feature is included to save time and money.

Primary & Secondary Zones

Minimum Dim Values

Dim-to-OFF Functionality

Field Programmable - Quick adjustment & Testing

Ethernet Connection

Preset Configuration

Daylight Harvesting

Group Configuration

DRC Configuration Application

Dialog Room Contoller

Ethernet Cat6

7

Energy Management Ready

CheckLight

BACnet Connectivity

A lighting system is one of the largest energy users in a building. To optimize the lighting system, facility managers have relied on code requirements and past experience to set control strategies. What if there was a way to optimize the system by locating system inefficiencies and providing an easy way to change them?

CheckLight™ from Douglas Lighting Controls® is an energy management platform that helps optimize the energy use of your lighting system. Facilities that requirement an Energy Management system can use our CheckLight platform to gather data from CheckLight equipped devices to measure, report, and control their lighting system from a web-based application.

Cat 6 (BACnet IP)

#18/2 (Dialog)

DIALOG SYSTEM CONNECTIVITY• Full Dialog Features and Functionality

• Global Control functions such as T ime Clock, Master Switching, etc.

• Centralized BACnet access

Building Management Network

A member of the Panasonic Group

Dialog® is a Registered Trademark of Douglas Lighting Controls. January 2017 – Subject to change without notice.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by Panasonic is under license.

Other trademarks and trade names are those of their respective owners.

LIT#: DRCF080619

toll free: 877-873-2797direct: 604-873-2797lighting@douglaslightingcontrols.comwww.douglaslightingcontrols.com

Your Douglas Lighting Controls representative: