Roofers Choice 2010 Roofing Tools Catalog

68

description

Roofers Choice and Rock Solid Tools for the Professional Contractor

Transcript of Roofers Choice 2010 Roofing Tools Catalog

Page 1: Roofers Choice 2010 Roofing Tools Catalog
Page 2: Roofers Choice 2010 Roofing Tools Catalog

Sales & Policy Information

Payment TermsApproved credit terms are Net 30 days. Late fees are assessed after 30 days at the rate of 1½% per month.

Freight TermsOrders exceeding $1,000.00 and shipped within the Continental United States, shipping charges are paid, excluding FOB items.

C&R reserves the right to select a preferred freight carrier on all freight paid orders. LTL orders that do not qualify for freight allowance will be shipped freight pre-paid and actual freight charges will be added to invoice.

Many products may be purchased in any quantity. See price list for restrictions.

No minimum order requirement.

PackagingAny shortage or overage should be reported immediately and appropriate measures will be taken. Please note any damage or lost freight on bill of lading at the time of delivery.

Drop ShipmentsC&R will assist you with drop shipment which are subject to regular freight terms. Blind packing slips available upon request. Drop shipment C.O.D. service is not available.

Prices are subject to change without notice.

Hot Line: 1.800.248.5445Fax Line: 405.547.5399

Email: [email protected]

www.rooferschoice.com

Page 3: Roofers Choice 2010 Roofing Tools Catalog

Index

3-Way 58911 Emergency Roof Patch 62Air Blow Gun 58Air Hose 58Asphalt Primer 44Axes 16Blades 2, 3, 4Boots 34Broom Handles 7Brooms 6, 7Bucket Grid 28Buckets 60Bungee Cords 50Carpet Blades 4Cat Claw 16Caulk Guns 8Caution Tape 49Chalk 9Chalk Box 9Chalk Line Saver 9Chip Brushes 5Chip Brushes 30Cleaning Products 10Coil Nailer 59Core Cutter 56Cougar Paws 60Coupset 58Drill Bits & Drivers 55Drywall Knife/Cutter 56Ear Plugs 35Ear Protectors 35Estwing 14Extension Cords 61Face Shield 17First Aid Kit 35Flashlight 60Flooring Blades 4Flux Brushes 5Gas Cans 64Gatorade & Cooler 60Gloves 11, 12, 13Hacksaw 57Hammer Tacker 64Hammers 14, 15Hand Cleaner 10Hard Hats 17

Hatchets 14, 15Hatchet Blades 3Hex Key Wrench 53Hook Blades 2Insulation Knife 56Kettle Skimmer 64Knee Pads 18Knives 19, 20, 21Koil Karriers 59Ladder Anchor 32Ladder Hook 32Ladder Jacks 32Ladder Racks 32Leather Products 22, 23, 24Level 57Lumber Crayons 45Magnet Sweepers 25Measuring Wheels 48Mixers 29Mop Handles 27Mops & Accessories 26, 27Oil 59Pad Locks 64Paint 44, 45Paint Tray & Liner 29Pallet Covers 49Paper Masks 35Peak Anchor 35Pennant Flag Stand 33Pennant Flags 33, 49Pick Mattock 16Pitch Fork 40Pitch Gel 34Pitch Hood 34Pliers 53, 54Prybars 14, 15Pumps 62Quick Change 19Rags 10Rain Suits 34Rakes 41Razor Blades 4Replacement Line Chalk Box 9Respirators 35Rivet Gun 62

Roller Covers 28Roller Frames 29Roof Brackets 32Ropes 31Safety Glasses 38, 39Safety Kits 35, 36Safety Rail Extension Bars 33Safety Vests 34Saw Blades 56Sawhorse 57Scissors 51Scrapers 4Screw Drivers 53Scrubber Pad 46Seam Probe 47Seam Roller 47Sheet Metal Clamp 54Shingle Cutter 59Shovels 40, 41Siding Tool 56Slate Ripper 56Sponge Paint Brushes 30Spud Bars & Blades 43Square 57Squeegees 5Staples 64Stretch Film 49Talon Blades 3Tape 49Tape Measurers 48Tarps 50Tear -Off Tools 40, 41, 42Tile Sponge 46Tin Snips 51Torches 63Traffic Cones 33Trailer Hitch Ball 63Trash Bags 49Trowels 52Utility Blades 3Wasp Spray 45Water Hose 62WD-40 62Web Strap 35Wire Brush 56Wrecking Bar 16Wrenches 54

Item Page No. Item Page No.Item Page No.

Page 4: Roofers Choice 2010 Roofing Tools Catalog

Blades

Retail Carded Pack of 5

# 208-005Hook Blades

# 210X-005Extra DeepHook Blades

# 208H-005Hook Bladeswith Hole

# 208-701Dispenser Box with 100 Standard Hook Blades

# 208H-701Dispenser Box with 100 Hook Blades with Hole

# 208-105Standard Hook Blades. 1 pack of 100 blades(20 wraps of 5 blades)

# 208H-105Hook Blades with Hole 1 pack of 100 blades(20 wraps of 5 blades)

High Quality Hook Blades

# 208 seriesMade in England

Fits most standard knifes

# 208XL-1001 pack of 100 blades

# 208XL-005Available in Tube containing 5 blades

Made in England

# 210X-105Extra Deep Hook Blades with round hole

1 pack of 100 blades

Made in England

Will cut tri-laminate shingles in one strokeBest Hook Made2

Page 5: Roofers Choice 2010 Roofing Tools Catalog

Blades

# 207-105Utility Blades1 pack of 100 blades(20 wraps of 5 blades)

# 207H-105Utility Blades with Hole1 pack of 100 blades(20 wraps of 5 blades)

# 207-701Dispenser Box with100 Utility Blades

# 207H-701Dispenser Box contains100 Utility Blades with Hole

Made in USA

# 31Talon blades in tube(5 blades per tube)

# 301 pack of 100 talon blades(20 wraps of 5 blades)

Series Fits # 100 Knife

# mss-30tubeEnglish Bow Tie Blades(5 blades per tube)

# 103Two-Notch 3" Utility Blade 1 pack of 100 blades (20 wraps of 5 blades)

# 23AJC Roofing Hatchet Blades Available in Tube (10 blades per tube)

# 207-005Utility Blades

5 Pack Retail Cards

# 207H-005Utility Blades with Hole

Made in England

3

Page 6: Roofers Choice 2010 Roofing Tools Catalog

BladesHeavy Duty Scraper with 4" Blade# CR-113• Includes 1 blade

Heavy Duty Scraper with 6" Super Blade# CR-6014• Includes 1 blade• Extra solid design• Twist 'N Lock feature allows

extension up to 48"

6" Replacement Blade for CR-6014# 6014-BLADE• 10 blades per wrap

4" Scraper Blades# 250.020" thickness. 100 blades per box.# 200.020" thickness. 10 blades per tube.

8" Scraper Blades in Tubes# 800.035" thickness10 blades per tube# 080.035" thickness3 blades per tube

Heavy Duty Razor Scraper# 16

# CR-9Single Edge Razor Blade• 100 individually wrapped blades per box

Square End Carpet Blade# 62 • 0.015" thickness• 2.25" X 0.75" carbon steel• 1 pack of 100 blades (20 wraps of 5 blades)

Round End Carpet Blade# 63 • 0.015" thickness• 2.25" X 0.75" carbon steel• 1 pack of 100 blades (20 wraps of 5 blades)

4

Page 7: Roofers Choice 2010 Roofing Tools Catalog

Brushes & Squeegees

Flux BrushA box of 144 brushes# Flux

Chip BrushesEconomical, 1.5" long bristles with wood handle. Made in Indonesia. Available in various sizes: .5" Brush # PB-1/21" Brush # PB-11.5" Brush # PB-1.52" Brush # PB23" Brush # PB34" Brush # PB44" Brush double thickness # PB4HD

Curved 24" # 24cursqCurved 30" # 30cursqCurved 36" # 36cursq

Straight 18" # FS118Straight 24" # FS324Straight 30" # STSQ30Straight 36" # STSQ36

Wood Notched 24" with threaded hole # NS-24

use H60MT Handle

18" with 1/4" Serrated Squeegee # 18SS-2518" with 3/16" Serrated Squeegee # 18SS-31624" with 1/4" Serrated Squeegee # 24SC-2524" with 3/16" Serrated Squeegee # 24SC-31636" with 3/16" Serrated Squeegee # 36SC-316

All Metal Squeegees use HD60T Handle

5

Page 8: Roofers Choice 2010 Roofing Tools Catalog

Brooms

High Quality Durable Brooms for Every Task

24" Plastic Floor Broom # B-1624S• Heavy duty sweeper for concrete floor• Maroon synthetic bristles• Broom brace recommended, see page 7• Brace and threaded handle sold separately

Felt Broom• Palmyra fiber broom

• Used for applying felt rolls on roofs• Large handle brace and threaded handle sold separately

Available in 36" # CR1236, 30" # CR1230 and 24" # CR1224

Gray Flagged Fine Sweep Brush• Push broom for sweeping smooth floors• Broom brace recommended, see page 7• Brace and threaded handle sold separatelyAvailable in 36" # G36-Brush, 30" # G30-Brush,24" # G24-Brush and 18" # G18-Brush

White Street Broom• 4" stiff plastic bristles• Tapered handle sold separatelyAvailable in 16" # ST7166 and 24" # ST2400

16" Palmyra Street Broom # PS16-SB• Durable stiff palmyra fibers• Great for outdoor jobs• Tapered handle sold separately

18" Palmyra Garage Broom # 1218PSB• Durable stiff palmyra fibers

• For heavy cleaning• Threaded handle sold separately

18" Blacktop/Roofing Applicator # DA18-SP• Has palmyra fiber on one side and rubber

squeegee strip on the other• For spreading liquid material over hard surfaces

• Threaded handle sold separately

Black Tampico Broom• 2.5" trim of hardwood block with tampico fibers

• Threaded handle sold separatelyAvailable in 18" # BT-18, 24" # BT-24 and 36" # BT-36

6

Page 9: Roofers Choice 2010 Roofing Tools Catalog

Brooms

Wood Threaded # TBH4848" X 15/16"

Tapered Handle # H48T48" X 15/16

Tapered Handle # HD60T60" X 1-1/8

15/16" Metal ThreadedAvailable in 60" handle # H60MT

and 72" handle # H72MT60" X 1-1/8" Metal Threaded

# HD60T

Warehouse Broom• Heavy 34 lb. per dozen# W-34

High Quality and Durable Brushes for Detailed Jobs

3 Knot Brush in 6¼ wood block# 3KT• Tapered handle sold separately

4 Knot Brush in 8¼ wood block# 4KF• Tapered handle sold separately

Tampico Roofer's Brush• 7" Tampico Brush• Available for tapered handle# RTW-7tapor threaded handle# RTW-7thread

10" Tampico Applicator Brush# DeckscrubFits either tapered or threaded

Whisk Broom• Handheld# Whisk

6½" Masonry Brush# MB-20

Roofer's Corn Broom• Heavy 40 lb. per dozen

• Rattan filled# cornbroom

Synthetic Broom• Metal Case• Upright Broom# CR00136

Broom Brace• Fits standard

brooms# MB-106

7

Page 10: Roofers Choice 2010 Roofing Tools Catalog

Caulking Guns

Premium Heavy Duty Dripless Caulking Gun• 9 oz. with 300 lb. thrust• With cutter & spout puncture# CG-300HD

9 oz. Dripless Gun

• Spout puncture# CKDP-5

9 oz. Ratchet Gun

• With cutter & spout puncture# CKR-10

9 oz. Skeleton Gun

• Spout puncture# CKS-5

Quart-Size Dripless Skeleton Gun# QCHDS-837

Professional Grade Caulking Guns

8

Page 11: Roofers Choice 2010 Roofing Tools Catalog

Chalk & Line Reels

Professional Grade Chalk Line Reels and Powder Chalk

Little Giant # G110• 110 ft. with heavy duty cord and pull ring• Holds almost 1 lb. of chalk

5 lb. Marking ChalkBlue # CHB-5PRed # CHR-5PGlo-Orange # CHGLO-5P

Replacement Line# G110-RPL• for G110 and G115 chalk line reel# RPL-10• for SCH-115 chalk line reel

Giant # G150• 150 ft. with heavy duty cord and pull ring• Holds over 1 lb. of chalk

Chalk Line Saver• Clear spray that will make your chalk line last longer# Chalk Line Saver

Speed Reel• 100 ft. polyester line• Rewinds 3X faster• Freewheel disengage gear• Quick fill rubber grommet• ABS case/Carded# SCH-115

White # CHW-8Blue # CHB-8Red # CHR-8Glo-Orange # CHGLO-8

Other chalk colors may be available upon request!

8 oz. Marking Chalk

Metal Case • 100 ft. polyester line• Freewheel disengage gear• Carded# CH-25

9

Page 12: Roofers Choice 2010 Roofing Tools Catalog

Cleaning Items

MAXKLEEN Natural Citrus Cleaner• Contractor Strength, removes and dissolves• Grease, inks, stains, tar, asphalt, fresh paint, spray adhesive• Safe, quick, economical in one quart spray bottle # Maxkleen one gallon bottle # Maxkleen-1gal

DEGREASE-IT• Heavy duty water

based cleaner that produces a rich foam which quickly pen-etrates and dissolves grease, oil, graphite, silicone, ink, dirt, fats and proteins

• In 1 gallon bottle# Degreaser-1gal

ALGAE 'N MOSS• Non-solvent, biode-

gradable cleaner to be used on asphalt shingles, cedar roofs, wood decks, fencing and gazebos

• Removes dirt, mildew, algae, fungus and moss

• Will not harm plants and pets

• Economical in a one quart spray bottle

# Algae-cleaner

MAXKLEEN• Tar, Asphalt and

Adhesive Remover• Ozone safe, tough

orange extract cleaning solvent

• Comes in a 15 oz. spray can

# Aerosol 321

SCRUBS IN-A-BUCKET• 72 ct. pre moistened cleaning towels# scrubs

Box of Rags• 10 lb. rated box• For general cleaning

White Knit Rags # WP-CLOTHColored Knit Rags # WP-ColorGrey Sweat Shirt # WP-GreyColored Sweat Shirt # WP-ColorSW

GOJO Hand Cleaner• 1 gal. creme hand cleaner# 955-02• 14 oz. creme hand cleaner# 912GOJ

Bag of Rags• Packaged in 10 lb. Rated Poly Bag• T-shirt knit material• More absorbent than sweat shirt or corduroyAvailable in white only# WP-BAG-WHITEand in multi color# WP-BAG-COLOR

10

Page 13: Roofers Choice 2010 Roofing Tools Catalog

Gloves

# 8001• Goat skin Mechanic glove• Velcro wristwrap• Available in size: L, XL• Carded/Tagged

# VOLCANO• Toughest glove in the world!• 4 X bull whip leather• Double reinforced Velcro wrist wrap Available in size: M, L, XL and XXL

# BM-5500• Mechanics style cushion work gloves• Available in size: L, XL• Carded/Tagged

# 3050• Leather palm gloves• 2" safety cuff

# 7001• Deer skin Mechanic glove• Velcro wristwrap• Available in size: L, XL• Carded/Tagged

# 6427• Grain leather Palm• With gray split leather back

11

Page 14: Roofers Choice 2010 Roofing Tools Catalog

Gloves

# 2050• 100% cotton• With black dots for extra grip

# 3000• Split leather grain• Knit wrist

# 1100• 9 oz.• Brown jersey gloves

# 1990• Red knit wrist• Straight Thumb• Double palm canvas

# 1800• 800 gram weight• Reversible• Cotton/Polyester blend string knit

# 3855• Reversible, plastic dotted cotton gloves

12

Page 15: Roofers Choice 2010 Roofing Tools Catalog

Gloves

# 2800-GP• White nylon, gray nitrile palm• Available in size: L and XL

# 1450R• Black PVC pair gloves• Rough finish in 14" length

# 1275• Blue palm dipped cotton gloves• Available in size: L and XL

# 1450RH• Black PVC right hand only glove• Rough finish in 14" length

# 3242• Blue Atlas Style• Gray cotton/polyester• Latex coated palm• Available in size: L and XL

# 4320• Powder Free• Disposable Nitrile Gloves

# 4120• Latex Comfort• Lightly Powdered• Ambidextrous

13

Page 16: Roofers Choice 2010 Roofing Tools Catalog

Hammers, Hatchets & Pry Bars

Straight Claw with Leather Grip20 oz. # E20S16 oz. # E16S

Roofing Hatchet with Vinyl Grip# E3-S

Shingle Hammer with Milled Head# E3-CA

Drywall Hatchet with Vinyl Grip# E3-11

Straight Claw with Vinyl Grip 20 oz. # E3-20S 16 oz. # E3-16S

20 oz. with sliding gauge# SSSH-20R

18 oz. with Fixed gauge# SS-18JC

Shingle Hatchet• Hickory handle• Triple wedge assembly• Meets ASME specification• With replaceable blade and gauge

15" Handy Pry Bar# EHB-15

18" Forged I-Beam# EPB-1814

Page 17: Roofers Choice 2010 Roofing Tools Catalog

Hammers, Hatchets & Pry Bars

OCK OLIDR SShock AbsorptionShingle HatchetItem # 14-IVHM

Hickory HandleShingle HatchetItem # IVH-10

Hickory HandleMilled Face HammerItem # Hammer-22 Item # Hammer-24

16 oz. HammerWood handleItem # 3030

Cushion GripFiberglass HammerSmooth FaceItem # 3043

Shock AbsorptionSteel HammerSmooth FaceItem # 20Z-MHItem # 16Z-MH

Heavy Duty Pry Bar• 15" Made in USA# VH-25Heavy Duty Pry Bar

15" # IVH-2518" # IVH-18

15

Page 18: Roofers Choice 2010 Roofing Tools Catalog

Axes & Pry Bars

11" Cat Claw# Cat-Claw

Wrecking Bar2¼ lb. Size: 5/8" X 18" # WB-183¼ lb. Size: 3/4" X 24" # WB-245¼ lb. Size: 3/4" X 36" # WB-36

Double Bit Axe3½ lb. with 36" wood handle# DoubleBit Axe

Fiberglass Axe3½ lb. with 36" fiberglass handle# 4F-AXE

5 lb. Pick-Mattock Head# TP-5Head

36" Pick-Mattock Wood Handle# Mattock Handle

Pick-Mattock5 lb. head with 36" wood handle# TP-5M

Single Bit AxesDrop forged and heat treated2½ lb. with 24" wood handle # 25AXE3½ lb. with 36" wood handle # 3.5 AXE

16

Page 19: Roofers Choice 2010 Roofing Tools Catalog

Hard Hats

# FBHW-15

# FBHY-15 Ratchet suspension features easy turn knob

4-point comfortable impact absorbing suspension

Cushioned brow pad for better fit

# HHO-5# HHW-5

# HHY-5

Adjustable hinged to fit low on the nape of the neck

Adjustable strap

4-point comfortable impact absorbing suspension

Removable, washable and replaceable cushioned brow pad that absorbs moisture

Adustable hinged rachet to fit low on the nape of the neck

4-point comfortable impact absorbing suspension

Removable, washable and replaceable cushioned brow pad that absorbs moisture

# HHRB-10

# HHRW-10# HHRY-10

# HHRO-10

# HHRG-10

Ratchet suspension features easy turn knob

Protective Face Shield• Heavy duty plastic shield• Ratchet adjustment fit all sizes# FS-10

17

Page 20: Roofers Choice 2010 Roofing Tools Catalog

KneepadsOCK OLIDR S

Econo-Flex EZ Knee Pads• Good comfort• Protects in extreme conditions• Minimum investment allows for disposal# EZ

Professional Roofer's Knee Pads

• Heavy duty with Velcro Straps

# 345

Heavy Duty Leather Knee Pads• Good comfort• For extreme conditions# 309

KN-1 Knee Pads• Durable yet flexible• Lightweight• Waterproof• Non-skid outer shell# KN-1

Gel Knee Pads• Extra comfortable!# G-361

KN-3 Knee Pads• Durable, lightweight and waterproof• Smooth and rivet free hard shell• Spares sensitive work surfaces from damage# KN-3

Work Safely with professional kneepads.

Ergonomically designed forRoofers, Builders, General Construction, any job that brings you to your knees!

Extra Heavy Duty Professional Leather Knee Pads• ½" thick water-repellent felt lining

for all day comfort• Moisture resistant heavy neolite

sole pad• Adjustable leather straps with

steel buckles• Extra leather front for extended

wear# 31118

Page 21: Roofers Choice 2010 Roofing Tools Catalog

Knives

Quick Change KnivesFits blades # 207-105 and # 208-105

Fixed Blade Quick Change Knife# QC-9

Retractable Quick Change Knife with Rubber Grip# QC-24

Retractable Quick Change Knife# QC-14

• Change blades fast without tools• Larger handle gives sure fit grip• Includes plastic sheath• Available in bright color for high visibility• Every order of 12 units will come in a box display

19

Page 22: Roofers Choice 2010 Roofing Tools Catalog

Knives

3

2

1

3

2

14

Oversized 8⅜″

Bulk Pack Quick Change Knife with Rubber Grip• This item is sold without box display and sheath# SC-20

Releasable Blade Knife with Easy Button# NB-KnifeQuick Release Blade1 - Push Easy Button2 - Blade is released for quick change3 - Blade Storage4 - Slide to control blade length

Breakaway KnifeAvailable in# BK-Large # BK-Small

Folding Blade Knife with Metal Clip# CR46080Quick Release Blade 1 - Push down locking button2 - Blade is released for quick change3 - Safety Lock

Handy belt clip

20

Page 23: Roofers Choice 2010 Roofing Tools Catalog

Knives

OCK OLIDR S

Non-Retractable Utility KnifeComes with 3 bladesRetail Carded# 100-09or for bulk ordering# HT-09

Retractable Utility KnifeAvailable in Retail Carded# 100-14or for bulk ordering# HT-14

Fixed Angle Knife• With metal butt cap for

greater durability• Retail Carded# AK-09

Roofer's Knife• All metal knife with 3 blades• Fits blades # 30 and # MSS-30tube# 100

Carpet Knife• "Rock Solid" Brand• Slotted Blade • Retail Carded# CK-3028

21

Page 24: Roofers Choice 2010 Roofing Tools Catalog

Leather

High quality suede leather tool bags for your everyday needs • Fits belts up to 2" wide

12 Pocket Apron• 2" wide polyweb belt adjusts to 46"# 1427X

Single Pocket Bag# 444X

2 Pocket Bag# 483X

3 Pocket Bag# 1523X

8 Pocket Bag# 1823X

10 Pocket Bag# 1923X

Hammer Holder• Steel cradle designed

to eliminate hammer pivoting

# CR4391

45º Cordless Drill Holster• With hook and loop

safety strap• Fits most cordless drills• Fits belts up to 2" wide# DRL91

Hammer Tacker Stapler Holder• Double layer of polyester fabric• Holds most brands of hammer tacker/staple# 5002

22

Page 25: Roofers Choice 2010 Roofing Tools Catalog

Leather

High Quality Top Grain Leather Tool Bags

10 Pocket Heavy Duty Work Apron• 2" wide leather belt with metal buckle adjusts to 46"# CR527TPL

10 Pocket Heavy Duty Work Apron• 2" wide canvas belt with snap buckle adjusts to 46"# CR427ITP

2 Pocket Bag# CR4831

10 Pocket Bag# CR9231

Single Pocket Bag# CR4441

Utility Knife Sheath# CR4531

Measuring Tape Holder• Safety snap button# CR12451

Hammer Holder• Steel loop# HH943

• Leather retains shape• Fit belts up to 2" wide

23

Page 26: Roofers Choice 2010 Roofing Tools Catalog

Leather/Polyester

Universal Cell Phone Holder• Heavy duty back

strap• Padded for great

protection# cellph

Work Belt• Army cotton web belt• Khaki# C501

Work Belt• Embossed leather belt• Mixed beige# E4501

22 pocket 16" Big Mouth Bag• Padded web reinforced handles and

adjustable shoulder strap• 16" L X 8" W X 10" H# 1165

Heavy duty polyester bags. Made with 600D polyester fabric and 1680D ballistic nylon bindings.

12 Pocket Apron• 2" wide web belt

adjusts to 46"# 1429

Leather Belt• Double hole belt• Black# BR502• Brown# BRB500

2 Pocket Bag# TB2

8 Pocket Bag# TBQ429

4 Pocket Bag# TQ92

Pro Builder’s Rig• Double-wall construc-

tion with abrasion resistant polyester

• Padded belt with leather trim

# TBQT924

24

Page 27: Roofers Choice 2010 Roofing Tools Catalog

Magnet Sweepers

14" Magnet SweeperPowder Coated - Yellow# MA-14

T-Bar Magnet SweeperPowder Coated - YellowVariety of widths18" T-Bar # T-18MAG24" T-Bar # T-24MAG30" T-Bar # T-30MAG

30" Releaseable Magnet Sweeper with Treadplate• Extra Strong Magnet• Powder Coated Yellow• Polished Treadplate

Aluminum# N30-Mag

Removable Magnet SweeperPowder Coated - YellowVariety of widths24" # MA-2436" # MA-36

Round Head Magnet• 35" Handle• Lifts 50 pounds!# RHMAG

The easiest way to clean up the worksite… Rolling Magnetic Sweepers

25

Page 28: Roofers Choice 2010 Roofing Tools Catalog

Mops

2½ lb. White Single Cotton Hank Yarn• Single strands of white yarn• 100% cotton hank tied 3 times• 24 units in a carton• Use with item # CR91261, 6' handle with steel bell adapter# CR2401

2½ lb. Drop Ply Cotton Hank Yarns• Mixed plied yarns, does a heavy duty job• 100% cotton and each hank tied 3 times• 24 units in a carton• Use with item # CR91261, 6' handle with steel bell adapter# CR1401

Mixed Fiberglass Pin Mop• A mixture of plied yarn and straight filament yarn• Pin type adapter attached with cotter pin through head

and handle• Uses 6' aluminum handlesAvailable in• 8 lb. Fiberglass Pin Mop• 6 units in a carton# CR15081• 10 lb. Fiberglass Pin Mop• 5 units in a carton# CR15101

Economy Blue Denim Hank Yarn• Blue denim 100% cotton yarn• Each hank tied 3 times• Use with item # CR91261, 6' handle with steel bell adapterAvailable in2½ lb. Blue Denim Hank Yarn• 24 units in a carton# CR34013 lb. Blue Denim Hank Yarn• 20 units in a carton# CR3481

Giant Blue Denim Pin Mop• 100% cotton blue denim yarn• Pin type fitting attaches with cotter pin through head and

handle for positive hold• Use with item # CR93261, 6' handle with pin adapterAvailable in40 oz. Blue Denim Yarn • 24 units in a carton# CR2340148 oz. Blue Denim Yarn• 20 units in a carton# CR2348164 oz. Blue Denim Yarn• 15 units in a carton# CR23641

26

Page 29: Roofers Choice 2010 Roofing Tools Catalog

Mops

Fiberglass Ring #1• Constructed to allow Roofer to

obtain the exact weight by adding as many rings as desired

• Rings are securely held by a spring type compression head with an easy adjustment thumbscrew

• 50 units in a carton

Available in• Economy Fiberglass Ring #1 • With fine filament type yarn# CR34011• Mixed Fiberglass Ring #1• With mixed filament type yarn# CR35011F

Handle for Hank Yarns• 6' rib aluminum

handle with steel bell adapter

• 12 units in a carton# CR91261

Handles for Pin Mops• 6' Rib Aluminum

Handle with Pin Adapter

• 12 units in a carton# CR93261

Pin Adapter• Pin type fitting

attaches with cotter pin through head and handle for positive hold

• 12 units in a carton# CR93001

Steel Bell Adapter• Staple through

mop bell holds yarn securely

• 12 units in a carton# CR91001

Compression Head• Spring type com-

pression head is easily adjustable with thumb screw

• 12 units in a carton# CR94001

4" Mop Staples• Staples hold yarn securely through mop bell• 100 in a box# CR0011

5" Mop Staples# CR0015

Roller Mop 12" and 18"• For all types of coatings• To use with roller mop frames• 12" X ¾" nap• 12 units in a carton12" # CR8812118" # CR88188

Handles for Adapter• 6' Rib Aluminum

Handle with bolt• 12 units in a carton# CR90261

Roller Mop Frame12" # CR801218" # CR8018

27

Page 30: Roofers Choice 2010 Roofing Tools Catalog

Paint Roller Covers

Professional Roller CoverDesigned for all roofing applications. Phenolic core and nap are epoxied to prevent delamination. Available in the following sizes:

4" Cat Paw Roller Cover• With Perlon FabricHolds more paint and releases it evenly. Great with latex or enamel paint on flat or eggshell finishes.# MRC4-CAT

9" Twin Roller Pack• " Nap# Twinpack

Mini Roller CoversFor use with gloss and semi-gloss paints, on smooth and light tex-tured surfaces.2 covers in a pack.

6-½" X " # MRC6-6-½" X ¼" # MRC6-¼6-½" X ½" # MRC6-½4" X ¼" # MRC4-¼

Shed Resistant Draylon Roller Cover!• Made of superior woven fibers for

jobs requiring minimum linting!

For smooth or semi smooth surfaces18" X " # SRC18-18" X ¼" # SRC18-¼18" X ¾" # SRC18-¾

Reusable roller cover for use with gloss, semi gloss paints, varnishes and polyurethanes on semi smooth surfaces.9" X " # SRC9-9" X ¼" # SRC9-¼9" X ¾" # SRC9-¾

18" X " # RC18- "18" X ¾" # RC18-¾"18" X ½" # RC18-½"18" X 1¼" # RC18-1¼"

9" X " # RC9- "9" X ¾" # RC9-¾"9" X ½" # RC9-½"9" X ¼" # RC9-¼"9" X 1¼" # RC9-1¼"

4" X " # RC4- "4" X ¾" # RC4-¾"3" X " # RC3- "

Perforated Roller CoverPerforated core for liquid glue application. Uniformly perforated to allow liquid to dispense evenly through the nap.Size 18" X " nap # 904

Aluminum Bucket Grid• 5 gallon size• 2 side wrapped# Bucketgrid

28

Page 31: Roofers Choice 2010 Roofing Tools Catalog

Paint Roller Frames

9" Heavy Duty "5 Wire" Roller Frame • Heavy duty roller frame with a 5/16" stem• Handle is reinforced with a metal ring• Great for rooftop usage# RF9HD

Roller Frames• These frames have ¼" stems with synthetic grips and recessed threads.Available in3" Roller Frame# RF-34" Roller Frame# RF-49" Roller Frame# RF-9

9" Roller Frame with hardwood handle• Heavy duty roller frame with a 5/16" stem# WH9RF

Single Rod Roller Frame• Perfect for mini covers. Fits # MRC series.Available in4" Single Rod Roller Frame, 11" in length# 4-MCRF6" Single Rod Roller Frame, 23" in length# MC6F

Plastic Tray Liner# PTLINER

9" Aluminum Paint Tray# ALTRAY

Roller Kit• 9" roller frame• Roller cover• Paint tray# Rollerkit

Universal Small Mixer• Small 1¾" with 19" shaft# UM-100600

Universal Round Mixer• Large 3¼" with 17" shaft# RM-120600

Universal Extra Large Mixer• ½" X 30" shaft# PM-2080

18" Adjustable Aluminum Roller Frames# RF18HD

9" Long Handle Roller Frame• Extra heavy duty roller frame with a 5/16" shaft# EL9RF

29

Page 32: Roofers Choice 2010 Roofing Tools Catalog

Paint Brushes

Made in Indonesia

Blue Poly Paint BrushBlue plastic handleAvailable in various sizes:1" wide poly brush # BPB11½" wide poly brush # BPB1.52" wide poly brush # BPB23" wide poly brush # BPB34" wide poly brush # BPB4

Sponge Paint BrushFor detailed finishes!Sponge is 2¼" tall with wood handleAvailable in various sizes:1" wide brush # SPB12" wide brush # SPB23" wide brush # SPB34" wide brush # SPB4

Chip BrushesEconomical 1½" long bristles with wood handleAvailable in various sizes:½" Brush # PB½1" Brush # PB11½" Brush # PB1.52" Brush # PB23" Brush # PB34" Brush # PB44" Brush double thickness # PB4HD

30

Page 33: Roofers Choice 2010 Roofing Tools Catalog

Rope & Tie Down Straps

3 Strand Manila Rope with Forged Snap HookAvailable in size:¾" X 60' #Manhook-60¾" X 100 # Manhook-100

3 Strand Manila RopeAvailable in size:½" X 100' # ½Manila100¾" X 100' # MA-100Coil¾" X 60' # MA-60

Yellow Poly¼" X 1200'# ROPE-¼POLY¼" X 600'# Rope-¼x600

500' Sisal Twine# TWINE

Sisal Rope ¼" X 100'# ¼ S100

27' Tie Down Strap with J-hook• Heavy duty 2" X 27'• For flatbeds and semi-trailers• 10,000 lb. rated capacity# 351G

Winch Strap• Heavy duty 4" X 30'• 15,000 lb. rated capacity• 5,000 lb. working load limit# 430FH

15' Tie Down Strap with J-hook• Heavy duty 1½" X 15'• 6,000 lb. rated capacity# 105G

27" Tie Down Strap with Flat Hook• Heavy duty 2" X 27'• For flatbeds and semi-trailers• 10,000 lb. rated capacity# 513G

Ratchet Strap• Heavy duty 1" X 10'• 2,400 lb. rated capacity • Working load limit 800 lb.# 101G

Solid Nylon Braid¼" X 100'# Nylon-100

Synthetic CordRope ¼" X 100'# Sashcord-100

31

Page 34: Roofers Choice 2010 Roofing Tools Catalog

Roof Brackets & Ladder Accessories

32

3 Rung Ladder JackA box of 2 units# LD-3rung

2 Rung Ladder JackBox contains 2 units# LD-Jack2• Tough welded aluminum

• For inside and outside ladder face• Should be fully decked using a 18" wide platform• Adjustable to fit round 'D' rung ladders

Adjustable Roofing Bracket• Use with 2" X 10" plank• Easy adjustment to 45º,

60º and 90º# Adbracket

Ladder Hook with Wheel# LDhook

19" Roof Brackets• Durable welded and powder coated frame• Standard 2" X 6" bracket fits 6" plank• Features 3 fastening notches• Bracket is removed without raising or

damaging shingleAvailable in various angle45 degree # RB-4560 degree # RB-6090 degree # RB-90

Ladder Racks• All metal quality ladder racks• 3 piece metal frame• 2 racks per box• Handle can be extended up to 40" from 20"• Assembled height is 63"• Available in powder coated white or black# LD-Rack-white# LD-Rack-black

Ladder Anchor• Securely fastens

ladder to the roof# Ladder-Reststop

Page 35: Roofers Choice 2010 Roofing Tools Catalog

Safety Equipment

Pennant Flags• 12" X 18"• 48 flags per 105 ft. strand• Available in yellow only, red only and a combination of red and yellow flags• Meets OSHA approval

# Pennant Flag-Red# Pennant Flag-Yellow# Pennant Flag-Colored Red and Yellow

Pennant Flag Stand• Stands 38" tall• Folds for easy carrying• Meets OSHA approval # Pennant Flag Stand

Safety Rail Extension Bars• Attaches to most

standard design extension ladders

• Reduces chances of fall by allow-ing climber to step directly onto roof or into ladder.

• Retail display box of 6 sets

# Ladstand

Traffic ConePVC orange traffic cone for day and night visibility

28" Traffic Cone• Approximate 7.5 lb. with 14" X 14" black base# Cone-28

18" Traffic Cone• Approximate 4 lb. with 10" X 10" black base# Cone-18

33

Page 36: Roofers Choice 2010 Roofing Tools Catalog

Safety Equipment

Pitch Gel• 5.5 oz. Pitch Gel• Water soluble• Clear greaseless gel• Prevents pitch burn# pitchgel

After Burn Cream• 5 oz. tube# After Burn Cream

Pitch HoodProtect from pitch burns and skin irritations!• Full coverage for face and neck • Breathable, lightweight and washable• Made from dacron materials• Assorted colors# Pitch-Hood

3-Piece Rain Suit35mm PVC/Polyester Non-conductive Rainsuit• 100% water proof* Detachable drawstring hood• Full cut jacket with adjustable fit on wrist waist• Bib pants with suspenders with storm-fly front zipper and snap button• High visibility yellow for safety• Available size: L, XL, 2XL, 3XL# Rain35suit

Safety Vest• Lightweight, polyester high visibility• Velcro closure, elastic side strips• 1" wide reflective strips• One size fits allAvailable in fluorescent green vest# SafetyVest-GreenFluorescent orange vest# SafetyVest-Orange

Slip-on Boots• Extra wide mouth with adjustable buckle strap• 17" high over-the-shoe boots• High visibility yellow for safety• Available size: 9-14(order one size larger than current shoe size)# Boots

Yellow PVC Apron•With neck loop and tie string 35" X 45"# PVC-Apron

Lakeland Zipper Coverall• Available size: L, XL and 2X# ZipperSuit

Premium Safety Vest• Solid polyester high

visibility vest• Velcro closure, elastic

side strips• 2" wide reflective strips# 690-1209L# 690-1210XL# 690-1211XXL

34

Page 37: Roofers Choice 2010 Roofing Tools Catalog

Safety Equipment

Heavy Duty Respirator# DustMask

Heavy Duty Respirator • With filter and soft

rubber foam lining# Resp-Mask

Paper Mask Pack• 5 pieces per pack# 14777

First Aid Kit• Complete 25-person kit• Meets OSHA requirement# FAK-2

Foam Ear Plugs• Complies to ANSI S3.19• A box of 100 pairs# Earplug

Safety Ear Protectors• Adjusts to fit all sizes• Cushioned muff for comfort# SEP-107

11' Web Strap Retractable• Meets or exceeds

all applicable OSHA and ANSI standards

# Ret-11-Web

Snappy Anchor• Disposable anchor• Bend to any roof pitch• Meets OSHA requirement# Snappy Anchors

Roof Peak Anchor• Heavy duty steel• May be mounted flat• Meets OSHA requirement# PeakAnchor

Full Body Harness# HUV-Harness# HUV-HarnessXL

Lifeline• ⅝" X 50 ft. Lifeline• Double locking

snap hook• High tensile 3-strand

synthetic rope• Capacity: 310 lbs.# Lifeline50

Self Retracting Lifeline• 3/16" X 30 ft. Galvanized steel

cable with snap lock• Load limits from 75

to 310 lbs.• Maximum arresting

force: 900 lbs.• Meets ANSI and

OSHA standard• Inspected for extra safety.

Has a smart locking action that activates the break in its cable housing when sudden pressure of pull is detected. This will prevent a person from falling further.

• To request other lengths, please contact us

# RLL30

Roof Peak Anchor• HD Zinc platted anchor• May be mounted flat• Meets OSHA requirement# CRPK-Anchor

35

Page 38: Roofers Choice 2010 Roofing Tools Catalog

Safety Equipment

Safety Kit in a Bucket• Full body harness• Heavy-duty 5/8" X 50' white polydac rope• 3' softpack lanyard with 5/8" manual rope grab• Hinged/re-usable roof peak anchor# SafetyKit-100

Safety Kit in a Bucket• Full body harness• Heavy-duty 5/8" X 50' blue steel polyolefin rope• 3' softpack lanyard with 5/8" manual rope grab• Disposable anchor# SafetyKit-50

36

Page 39: Roofers Choice 2010 Roofing Tools Catalog

Safety Equipment

Safety Kit in a Bucket• Full body harness• Heavy-duty 5/8" X 50' blue steel polyolefin rope• 3' softpack lanyard with 5/8" manual rope grab• Hinged/re-usable roof peak anchor# BL-200

Safety Kit in a Bucket• Full body harness• Heavy-duty 5/8" X 50' blue steel polyolefin rope• 3' softpack lanyard with 5/8" manual rope grab• 5 Disposable anchor# SN-500 safety

37 37

Page 40: Roofers Choice 2010 Roofing Tools Catalog

Safety Glasses

# SG350C• Full cover frame and clear lens

# SG350S• Full cover frame and smoke lens

# STORM-Smoke• Molded smoked lens/frame

# STORM-Widsom• Smoke lens and black frame

# STORM-Mirror• Molded blue mirror lens/frame

Stylish safety glasses for today's professional

# Condor-Smoke• Smoke lens and soft, flexible ear piece

# Condor-Mirror• Mirror lens and soft, flexible ear piece

# Condor-Clear• Clear lens and soft, flexible ear piece

38

Page 41: Roofers Choice 2010 Roofing Tools Catalog

Safety Glasses

# SW111• Black frame and clear lens

# SW116F• Flame black frame and smoke lens

# SW117• Black frame and silver mirror lens

# SW118• Black frame and blue mirror lens

# SW112• Black frame and yellow lens

# SW116• Black frame and smoke lens

# SW119• Black frame and rose lens

# SW126• Silver frame and smoke lens

99.9% protection against UVA/UVB raysCompliant with ANSI Z87.1 standard

# SW115CF• Comouflage frame and copper lens

39

Page 42: Roofers Choice 2010 Roofing Tools Catalog

Shovels & Tear Offs

#3 Tear-Off Serrated Spade with wood handle and fulcrum# CR1073without fulcrum# CR2037

#3 Tear-OffSerrated Spadewith D-Handle and fulcrum# CR1033without fulcrum# CR2088

C&R Tear-Off Spades are 15% larger than competitor brands

#10 Aluminum Scoop with Wood D-Handle# 707

Pitch Forkwith D-Handle# CR911F

#3 Tear-OffSmooth Spadewith D-Handle and fulcrum # CR1013without fulcrum# CR2035

#3 Tear-OffSmooth Spadewith wood handle and fulcrum# CR1053without fulcrum# CR1074

40

Page 43: Roofers Choice 2010 Roofing Tools Catalog

Shovels & Tear Offs

Steel Square Coal Shovelwith wood D-Handle# 713

Steel #2Eastern Scoop with wood D-Handle# 2Escoop

Steel Round Point Shovel with long wood handle# RPS-250

Steel Square Shovel with long wood handle# SP125

Welded Side- walk Scraper• 6¼" X 4¾"• Lightweight 4½" long wood handle# G-scraper

Steel Level Head Rake• 16 teeth with 5' long wood handle • Tempered high carbon steel head# Level-Rake

Steel Round Head Rake• 16 teeth with 5' long wood handle • Tempered high carbon steel head# RH-Rake

Made with Tempered High Carbon Steel

All D-handle shovels, approximately 44 inch in lengthAll smooth long handle shovels, approximately 5 ft. length

Excellent for Job Clean-up

41

Page 44: Roofers Choice 2010 Roofing Tools Catalog

Shingle Shovels

Size: 22"# 22 Tear-Off

Size: 54"# Tear-Off54

Heat Tempered Teeth

Size: 48"# Ripper-48

Size: 28"# Small Ripper

All Metal HandlesOval Shaped to Resist Bending

Replacement Skid Plate• Fits shingle shovel size 28" and 48"# RP-SkidPlate

Replacement Shingle Blade• Fits shingle shovel size 28" and 48"# RP-RipBlade

Size: 46"# Tear-46

42

Page 45: Roofers Choice 2010 Roofing Tools Catalog

Spud Bars

7" Spud Bar 3½" Spud Bar

Hand Spudder• With 2 blades# HS-50

7" Spud Barwith D-Handle # CRD-70with Ball Handle # CR-70

3½" Spud Barwith D-Handle # CRD-35with Ball Handle # CR-35

1½" Hand Spudder Blade# CR-12½" Hand Spudder Blade# CR-23½" X 4" Spud Bar Blade# CR-37" X 4" Spud Bar Blade# CR-7# CR-1# CR-2# CR-3# CR-7

43

Page 46: Roofers Choice 2010 Roofing Tools Catalog

Roof Paint & Asphalt Primer

The actual painted color may appear mildly different than the printed sample on this page

410 Quick Dry Asphalt PrimerA waterproof seal that traps and encapsulates dust and other loose particles prior to application of other sealing materials.

Great on concrete, felt, plastic, gypsum, glass, wood or metal.

• Seals • Bonds • Waterproofs • Rust Proofs

# Asphalt Primer

Premium Roof Accessory PaintHigh Quality Rust Resistant Enamel Paint. Excellent for stacks, vents, flashing, valleys and other residential roof penetrations. (Not for asphalt shingle surfaces)

# Paint- Slate Gray

# Paint- Weathered Wood

# Paint- Charcoal

# Paint-Cedar

# Paint- Birchwood

# Paint-Hickory

# Paint- Forest Green

# Paint- White

# Paint- Barkwood

# Paint- Tile Red

44

Page 47: Roofers Choice 2010 Roofing Tools Catalog

Spray Paint & Crayon

Lumber CrayonRed # LC-RedYellow # LC-YellowWhite # LC-White

Best Selling Wasp Spray in the industry!• Kills wasps and hornets• Spray up to 20 ft.• 14 oz. can# wasp-spray

Spray Paint

# SP-Flat Black

# SP-Black # SP-Brown # SP-Dull Aluminum

# SP-Copper# SP-White

45

Page 48: Roofers Choice 2010 Roofing Tools Catalog

Sponges

Scrubbing Pads 10" X 4½" X ¾"Blue pads for medium to harsh cleaning# Bluepad

White pads for light cleaning# Whitepad

Brown pads for harsh cleaning# Brownpad

10" Scrubbing Pad HolderAllow even pressure for efficient scrubbing# Padholder

Scrubbing EPDM Sponge• 6" X 4¼" X 1¼" EPDM sponge between scrub pads# Sponge-EPDM

Scrubbing Hand Pad• 6" X 9" X ¼ green pad for medium to harsh cleaning# Greenpad

10" Swivel Scrubbing Pad HolderUse with threaded handle when cleaning# Swivelholder

Tile Sponge• 7" X 4¼" X 2"• Thick foam sponge for

tile cleaning# Tile-sponge

46

Page 49: Roofers Choice 2010 Roofing Tools Catalog

Seam Roller

75 lb. Seam Roller with wheels# 75lb Roller

2" X 7/16" Nylon V-Shaped Roller# CR12540

2" X 2" Metal Radius Edge Single Fork Roller# CR021501

2" X 4" Silicone Double Fork Roller# CR051101

1-5/16" X 1¾ Silicone Roller# CR050201

2" X 2" Metal Double Fork Roller# CR020401

2" X 2" Metal Single Fork Roller# CR021401

2" X 4" Metal Double Fork Roller# CR021001

10" Heavy Duty Seam Probe• With non-slip rubber handle# Super-probe

10" Seam Probe• With plastic handle# Seam-probe

47

Page 50: Roofers Choice 2010 Roofing Tools Catalog

Tape Measures & Wheels

33' X 1¼" Magnetic Tip Tape Measure with Belt Clip# 714-33T

100' Fiberglass Tape Measure• With ABS case# ABSTP-100

100' Open Reel Tape Measure# ORTP-100

4" Measuring Wheel• Compact size with single wheel# 4SWHL

12" Measuring Wheel• 12" Whell Mea-

sures up to 100 feet

# RollRunner

6 ft. Carpenter's Folding Wood Rule# WoodRule

25' X 1" Tape Measure• Rubber shield measuring tape• Non-Slip grip• New style design• Carded

# TP-25

12" Measuring Wheel• 36" circumference wheel# 12WHL

48

Page 51: Roofers Choice 2010 Roofing Tools Catalog

Tapes & Films

Caution Tape3" X 300' # CT-3003" X 1000' # CT-1000

Danger Tape3" X 300' # DT-3003" X 1000' # DT-1000

Pallet Covers• Pre-cut bags are ideal for use as container liners or pallet and machinery covers• Perforated on a roll for easy dispensing• Linear low density poly

Available in size:# 4ft X 4ft Buff# 4ft X 8ft Buff# 4ft X 4ft Clear# 4ft X 8ft Clear

2" Tape Gun# T-Gun

2" Packaging TapeClear Tape# PKTAPE-ClearTan Tape # PKTAPE-Tan

Contractor Grade Duct Tape• 2" X 60 yards# Duct tape

Stretch Film5" Stretch Wrap• 5" X 1000' # Wrap-516" Stretch Wrap• 16" X 1500' with 65 gauge# STwrap-1718" Black Stretch Wrap• 18" X 1500' with 80 gauge# BSTwrap-18

Pennant Flags• 12" X 18"• 48 flags per 105 ft. strand• Available in yellow only, red only and a combination of red and yellow flags• Meets OSHA approval

# Pennant Flag-Red# Pennant Flag-Yellow# Pennant Flag-Colored Red and Yellow

3 mil Contractor Trash Bags• 20 trash bags per box• 32" X 50"• 42 gallon# Trash-20

Virgin Trash Bags• Similar to Husky Quality# VT-20

See page 33 for Pennant flag stand

49

Page 52: Roofers Choice 2010 Roofing Tools Catalog

Tarps

OCK OLIDR S

Blue Tarp Specification:• Strong and easy to clean• Eyelets approximately every 3' and all corners• Reinforced edges by PP rope in hem• Waterproof• All four edges heat sealed• Washable & Recyclable

Construction & Roofing Ideal Application:• Boat Cover•Truck Bed Cover• Wind Break• Fire Wood Cover• Outdoor Storage

Blue TarpsSizes Available:

• 6' X 8'• 9' X 12'• 10' X 12'• 10' X 16'• 10' X 20'• 12' X 16'• 12' X 20'

• 16' X 20'• 18' X 24'• 20' X 20'• 20' X 25'• 20' X 30'• 20' X 40'• 30' X 40'

Bungee Cords• 10 pieces in a bundle15" # BC-1521" # BC-2131" # BC-3141" # BC-41

• 30' X 50'• 30' X 60'• 40' X 40'• 40' X 50'• 40' X 60'• 50' X 100'• 100' X 100'

Grabbit• Attach to tarp for

pulling and carrying# BG50

EZ Grabbit• Mount tarps to

structures• Fasten tarps together• Grab tarps anywhere• Far superior to

grommets# EZ-Grabb

Excellent Tarp Tool

50

Page 53: Roofers Choice 2010 Roofing Tools Catalog

Tin Snips

Professional Offset Tin SnipsLeft Cut (red) # Off-snipleftRight Cut (green) # Off-snipright

Aviation Tin SnipsStraight Cut (yellow) # TS-5Left Cut (red) # TSL-10Right Cut (green) # TSR-15

Straight Pattern Snips10-inch # SPS-1012-inch # SPS-12

10" Trimmer Shear/Scissor# IMsizzors-10

Professional Aluminum Snip with Replacement Teeth12-inch # ALSNIP-1214-inch # ALSNIP-14

Replacement Bladesfor 12-inch # RPBLA-12for 14-inch # RPBLA-14

Replacement Blades

Will not roll on Metal

51

Page 54: Roofers Choice 2010 Roofing Tools Catalog

Trowels

7" Pointed Nose Trowel # PTR-75½" Pointed Nose Trowel # PTR-5

2" Margin Trowel # 2M

5" Round Nose Trowel # TR-57" Round Nose Trowel # TR-7

Notched TrowelComfort grip handle¼ X ¼ # Sqnotched ¼

# PTR-7

# PTR-5

# 2M

# TR-5

# TR-7

Torch Trowels• 6¼" Wide round nose HD trowel• 6¼" Narrow round nose HD trowel

# Torch trowel-large# Torch trowel-small

52

Page 55: Roofers Choice 2010 Roofing Tools Catalog

Screwdrivers & Pliers

6-in-1 Ratchet Screwdriver• Ratchet function• Includes 2 phillips head and 2 flat head tips• Only available in 10 sets per display# 12787

6-in-1 Ratchet Screwdriver• Ratchet function• Includes 2 phillips head and 2 flat head tips• Only available in 12 sets per display# 27995-Screwdriver

6½" Long Nose Pliers• Drop Forged, Heat Treated Steel• Brush Finished,

Precision Machined Jaws

• Non-Slip Cushioned Handle Grips

# 350NP

6" Slip Joint Pliers• Drop Forged, Heat Treated Steel• Precision-Machined• Polished and

Chrome Plated• Non-Slip Cushioned

Handle Grips# 3462JP

Hex Key Wrench• 9-pc. Hex (SAE)# HK25151• 8-pc. Hex (Metric)# MM161

4 Piece Screwdrivers• Magnetized Tips • Triple Chrome Plated# 270404pcScrew

Use on Nail Guns

53

Page 56: Roofers Choice 2010 Roofing Tools Catalog

Pliers & Wrenches

Adjustable Wrench• Carbon Steel Construction• Heat-Treated and Chrome Plated• Precision-Machined Jaws, Teeth and gears

for smooth accurate sizing

# Ad-W-6" # Ad-W-8"# Ad-W-10" # Ad-W-12"

10" Heavy Duty Pipe Wrench# CR2376PW

9-Piece Combination

Wrench Set• SAE Sizes• Set ¼ - ¾"

# CR1910S

Helical Curved Jaw Locking Pliers• Constructed of high-grade heat-treated alloy

steel for maximum strength and durability# CRW7

Locking Sheet Metal Clamp

• Holds in locked postition• Leaves both hands free

# CR8

Straight Jaw Locking Pliers• Constructed of high-grade heat-treated alloy

steel for maximum strength and durability# CR10

9-Piece Combination

Wrench Set• Metric Sizes

• Set 6 - 18mm # CR1911M

10" Groove Joint Pliers# 10GJPImport

Import

Import

54

Page 57: Roofers Choice 2010 Roofing Tools Catalog

Bits & Drivers

ISOMAX Professional QualityItem # Description Size# 3555-DSB Phillips/Slotted #2 x 1"# #1 Phillips Phillips #1 x 2"# #2 Phillips Phillips #2 x 2"# #3 Phillips Phillips #3 x 2"

Nut Setter # NMNS-1/4 1/4" Nut Driver 1/4" x 1-1/4"# NMNS-5/16 5/16" Nut Driver 5/16" x 1-1/4"# NMNS-3/8 3/8" Nut Driver 3/8" x 1-1/4"

10-Piece #2 X 1" Screwdriver Bits• Sandblasted Chrome

Vanadium 8660 Steel Bits# B-2878

Magnetic Bit Holder• Fits all Bits with standard ¼"

hex shaft• Chrome plated alloy steel tube# G-2869

1/8" Double Ended Drill Bit# TD-1/8

Magnetic Nut Setter• 1/4", 5/16", 3/8" hex• Magnetic hex head# MND-3pak Nut

Tubes of 24# MNS 1/4# MNS 5/16# MNS 3/8

Screw Remover• Removes stripped

or broken screws# SSC-682

Hammer Drill Bits• Smooth Shank• 3/16", 1/4", 5/16", 3/8"# Concret-3/16 # Concret-1/4# Concret-5/16 # Concret-3/8

Drill Bits• 1/4", 5/32", 3/8", 1/2"# DB-5/32 # DB-1/4# DB-3/8 # DB-1/2

Magnetic Bit Holder• With sliding guide# MBH-Slider

55

Page 58: Roofers Choice 2010 Roofing Tools Catalog

Core Cutter & Sawblades

24 Tooth Sawblades• 7¼" diameter carbide blade• 5/8" arbor with 8300 max. RPM• High quality carbide teeth. Excellent for framing and ripping use• 25 pieces in a box# CIRC-725

40 Tooth Sawblades• 7¼" diameter carbide blade• 5/8" arbor with 6000 max. RPM• High quality carbide teeth. Excellent for general purpose use• 25 pieces in a box# CIRC-420

Core Cutter• Powder coated• 2" core sample# CC-110

Circle Dry Wall Cutter# OT-003

Economy Dry Wall Knife# DRYK

Deburring Tool with Blade# OT-004

Wirebrush

Siding Tool• To remove and replace siding• Carbon steel blade with non-slip grip# SideTool

Slate Ripper# SLARIP

Insulation Knife• Professional quality insulation knife with poly cushion grip• Extremely sharp double-edge knife blade# Insul-Knife

# wirebrush

Automatic Center Punch# Punch-Metal

56

Page 59: Roofers Choice 2010 Roofing Tools Catalog

Hacksaw • Squares • Level

Super Heavy Duty Hacksaw• With quick release blade change• Cushioned grip handle• Extra blade can be stored in top bar• Blade can be positioned for 55° or 90° cutting# H-2015

Premium Heavy Duty Hacksaw• Quick release blade change• Cushioned grip handle• Extra blade can be stored in top bar• Blade can be positioned for 45° or 90° cutting# HS1HD

Extra blade storage

Blade released

Push downand then out

Tensioning wing nut

Extra blade storage

Blade released

Push down

Tensioning wing nut

Pull slide

24" X 16" All Metal L-Square# M-014L

Aluminum Alloy Square• Lightweight 7" multipurpose square• For straight or angle cuts# M-004

Hacksaw Blade Pack• 5 blades per pack# HD-blades Folding Metal Sawhorse

• Great for siding and plywood jobs• Sold individually# CRASAWH

9" Torpedo Level# MCL-290

16" Combination Square• With stainless ruler# M-016

57

Page 60: Roofers Choice 2010 Roofing Tools Catalog

Air Tools

Rubber

PVC

5-piece Coupler Set• Universal fit for ¼" NPT air tools# Coupset

Rubber Air Hose with Ends• 3/8" X 50 ft.• Imported# RB-AHSO

PVC Air Hose with Ends• 3/8" X 50 ft.• Made in USA# Air-H

3-Way Air Hose Head• Solid brass head with air inlet: ¼" NPT• Use to connect 3 pneumatic tools to one air compressor# 3-way

Blue Polyurethane Air Hose• ¼" X 50 ft.# Air-12725• ¼" X 100 ft.# Air-10000

Air Blow Gun• 2 Nozzles included• Air inlet: ¼" NPT# Air Blow Gun

58

Page 61: Roofers Choice 2010 Roofing Tools Catalog

Air Tools & Shingle Cutter

JIT Nail Gun

Koil Karrier Container• Constructed in thick poly carbonate plastic• Holds up to 7 coils of 1¼" nails• Secure latching lid prevents nails from falling out• Made in the USA# KKC

Roofing Coil Nailer• Light Weight • Rapid Fire Piston• Convenient Shingle Gauge• Rubber Comfort Grip# Nail GunCompressor Oil

• 32 oz.# Compressor Oil

Air Tool Oil • 15 oz.# Air Tool Oil

Shingle Cutter• Heavy duty steel• Cuts any asphalt or fiberglass shingle• For accurate and repeatable cuts at any angle• For starter course used along lower edge of the roof# shingle cutter

59

Page 62: Roofers Choice 2010 Roofing Tools Catalog

Gatorade & Cougar Paw Shoes

Cougar Paw Roofing Shoes• Leather Roofing Shoes• Designed for the Commercial Roofer• Replaceable Foam Soles in size 7-14Specify size when ordering# C-PAW & shoe size# Sole-Cougar & shoe size

5 Gallon Black Plastic Bucket with 'Roofers Choice' logo# 5gal(Sold separately)Lid for 5 Gallon Black Bucket# 5gal-lid

Calibrated Plastic Mixing Container• with readable measuring lines.Available in# 1 quart# 2.5 quarts# 5 quarts

MagLite• The Professional flashlight• Durable aluminum alloy case• Spare bulb included# Mini-mag small light# SC2016-mag large

Rubbermaid 5 Gallon Cooler# Rubbermaid Cooler Gatorade Thirst Quencher• 32 individual packages• Includes 8 of each flavor• Lime, Orange, Fruit Punch & Riptide Rush• Each package makes 2½ gallons# Gatorade-Variety

60

Page 63: Roofers Choice 2010 Roofing Tools Catalog

Extension Cords

OCK OLIDR S12/3 Gauge Extension Cords • Single Tap Available in 50 ft. Cord # 508-E 100 ft. Cord # 509-E

3 Way Extension Cords• 12/3 gauge with triple tapAvailable in 50 ft. Cord # 3W-418100 ft. Cord # 3W-419

Heavy Duty 3-Way Power Block with Surge Protector# SURGEP

3-Way Power Block • 12-Gauge• 2 ft. # Power-Block

3-Way Plug• For 12 guage cords# 3Plug

61

Page 64: Roofers Choice 2010 Roofing Tools Catalog

911 Emergency Roof Patch • Water Pump

Water Hose• 50 foot• ¾ diameter # Hose-34050

Utility Pump• 1/6 HP• 1260 GPH capacity

Plastic Body# 2305-Simer

Cast Body# Pump-2300

911 Emergency Roof PatchThis natural mineral compound, expands into a gel instantly upon contact with water. Perfect solution to make a temporary leak-proof seal for flat built-up roofs. Non-polluting and will not support flame. Can be applied when raining, snowing, melting ice, even in standing water! Comes in a 25 lb. bucket.# 911patch

Pop Rivet Gun Kit• Heavy duty aluminum cast frame and body• For rivets 2.4 mm, 4 mm and 4.8 mm# PT-RIVOT

WD-40• Includes Smart Straw• Spray or StreamNever lose straw again# WD-40

Make-it-Clamp• 55' long• 25 pieces (clamps)• Stainless steel# 25PCclamp

62

Page 65: Roofers Choice 2010 Roofing Tools Catalog

Torches & Hitch Accessories

Tri-Ball Trailer Hitch Mount• Solid steel construction• Ball size: 1 ⅞" with 3500 lb.

capacity, 2" diameter with 5000 lb. maximum capacity, 2 5/16" with 7500 lb. capacity

# Tri-Hitch

Trailer Hitch Ball• Ball size: 1 ⅞", 2" and 2 5/16" # Ball-1 7/8# Ball-2# Ball-2 5/16

Magnum Detail Torch• 33' Rubber Hose• LP Gas Regulator # S-30Torch

Magnum Torch• 33' Rubber Hose• LP Gas Regulator # L-100S

Magnum Torch Combo• 33' Rubber Hose

• LP Gas Regulator # C-100Torch

Trailer Hitch Ball Mount• 2" drop receiver# Rod-6006

⅝" Hitch Pin & Clip• Fits most 2" receivers # Hitch-pin

63

Page 66: Roofers Choice 2010 Roofing Tools Catalog

Tacker • Gas Cans • Locks

Hammer Tacker• Uses A-11 staples# Tacker

Tacker Staples• 5000 pieces in a box# Staples

Hammer Tacker Spring• Replacement spring for # Tacker only# Tack-spring

Gas Cans• Meets all OSHA requirements• Does not come with pour spout or funnel Available in2 Gallon # 36125 Gallon # 3615

Funnel• Prevents spills and splashes

# Funnel

All Metal Kettle Skimmer# Kettle-SK

3-Piece Bungee Cord Set• One 24", one 36" and one 48"# BungeeSet

4-Piece Laminated Padlock Set• Same key opens all 4 locks# 4pcLock

2" Laminated Padlock# CH-Padlock

BRINKS Pad Lock• Combination lock• Professional Quality# BrinksLock

Gas Can• 5 gal. red plastic• 5 gal. yellow plastic# Blitz-5gas# Blitz-Diesel-5

HD Hammer Tacker• Roofers Coice heavy-duty hammer tacker

with poly grip handle• Uses A-11 staples# HD BLTacker

64

Page 67: Roofers Choice 2010 Roofing Tools Catalog

Free Floor Display Call for details!

Quick Change Knifes with display box

Free Display with 42 pair order

GOnDOla ShelvinG: available as single or double-sided in lengths of 4 foot, 8 foot and 12 foot

Counter Display

Page 68: Roofers Choice 2010 Roofing Tools Catalog

Toll Free: 1-800-248-5445Fax: 405-547-5399Email: [email protected]

www.rooferschoice.com

C&R Manufacturing419 W. FreemanPerkins, OK 74059