ETERNA-SIL Premium Silicone Roof Coatings

SILICONE ROOF RESTORATION SOLUTIONS

FLORIDA 1904 SW 31ST AVE.

HALLANDALE, FL 33009 800.432.2855

CALIFORNIA 14435 MACAW STREET LA MIRADA, CA 90638

877.827.2622

TEXAS 1225 BRAI DRIVE

PORT ARTHUR, TX 77640866.727.0091

www.tropicalroofingproducts.com

Eterna_Sil_Silicone Brochure.indd 1 7/10/16 12:18 PM

TIME AND LABOR SAVINGS: With NO PRIMING REQUIRED on most roofing membranes, our system offers significant cost savings associated with labor, priming and time delays.

SUPERIOR ADHESION: 100% Silicone adhesion promoters and catalysts eliminates need for Primer. Use #996 ETERNA-SIL Premium Bleed Blocker over asphalt to prevent bleed-thru. Single component, no inter-mixing.

FAST CURE TIME: Set to touch in 1 hour. Cures in 2-8 hours depending on heat and humidity conditions.

RE-COATABLE: ETERNA-SIL Premium Silicone Coatings can be applied over previously coated Silicone roofs.

HIGH BUILD FORMULATION: Allows for single coat application and hangs on peaks without sagging.

UNAFFECTED BY STANDING WATER: Ponding water resistant

EASE OF USE: ETERNA-SIL Premium Silicone Roof Coating can be applied with commercial airless equipment, roller or brush.

SILICONE DURABILITY: Cured silicone rubber exhib-its excellent long-term resistance to natural weathering including: extreme temperatures, ultraviolet radiation, rain and snow.

VOC COMPLIANT: High solids solvent-free formulation and low Volatile Organic Compounds content is well below the current limits of California’s relevant Air Quality Management Districts.

LONGER STORAGE AND SHELF LIFE: ETERNA-SIL Premium Silicone Roof Coating can be stored in unheated warehouses during cooler months. Shelf life is 18 months from date of manufacture when properly stored.

SAFER: No Methyl Ethyl Ketoxime. Low VOC formula.

A professional grade high-solids, low-VOC, 100% silicone liquid coating applied in a single coat. While a primer is not required, an asphalt bleed-blocking base coat can promote energy savings, and a rinseable wash can help optimize adhesion. #914P Silicone is an elastomeric membrane exhibiting outstanding weathering water resistance for application over itself and other silicone roof coatings on architectural surfaces such as vertical walls, masonry, concrete, metal, single-ply membranes and sprayed-in-place urethane foam (SPUF) systems. Energy Star, California Title 24 compliant, UL Class A, Factory Mutual (FM) and Miami-Dade County approved.

Application rates will vary by surface, porosity, and job conditions. Please consult Tropical Roofing Products for total dry film thickness requirements.

914P ETERNA-SIL Premium 100% Silicone Roof Coating

Application rates will vary by surface, porosity, and job conditions. Please consult Tropical Roofing Products for total dry film thickness requirements.

904P ETERNA-SIL Premium Original Formula Silicone Roof Coating

A professional grade, Energy Star rated, CRRC rated, California Title 24 compliant, UL Class A, FM and Miami-Dade County approved ready-to-use solvent borne, single component, moisture cure liquid applied silicone coating. #904P Silicone is an elastomeric membrane exhibiting outstanding weathering water resistance and crack bridging properties for application over architectural surfaces such as vertical walls, masonry, concrete, metal, single-ply mem-branes and sprayed-in-place urethane foam (SPUF) systems.

A highly engineered acrylic single-component, water-based bleed blocker designed for application over BUR, Mod-Bit, and smooth or mineral surfaced cap sheet. #996 is designed specifically to prevent asphalt bleed-through when applying Silicone coating systems over all asphalt substrates. #996 requires no inter-mixing and delivers fast-dry performance.

Apply at a rate of 1-2 gallons per 100 sq. feet per coat dependent upon roof porosity.

996 ETERNA-SIL Premium Asphalt Bleed Blocker

Tropical Roofing Products ETERNA-SIL Premium Silicone Solutions offer the professional

roofing contractor many advantages over other Silicone Coating Technology including the

opportunity to reduce installation time and labor with a Primer-less, single-coat Silicone Coating

solution. And, in a business where time equals money, roofing contractors will enjoy improved

installation efficiency and building owners a sustainable roofing system with low life-cycle costs.

ETERNA-SIL 100% SILICONE FEATURES AND BENEFITS

ETERNA-SIL PREMIUM SILICONE ROOF COATINGS

A professional grade high performing sealant for protection of seams, penetrations, and fasteners on various architectural surfaces and roofing substrates. Upon cure, #9100 forms a durable, breathable and weatherproof barrier that is highly resistant to degradation from UV and natural weathering.

Apply at a minimum rate of rate of 85-125 lineal feet per gallon with 4” to 6” wide 40 mils thick application. Application rates will vary by surface, porosity, and job conditions. Please consult Tropical Roofing Products for total dry film thickness requirements.

9100 ETERNA-SIL Premium Silicone Multi-Purpose Mastic

ETERNA-SIL PREMIUM PRIMERLESS SILICONE VS. COMPETITIVE SILICONE COATINGS Specs*: 10,000 Square Foot (100 squares) project over BUR/Mod-Bit *Comparison bids included Contractor Overhead

Solar Reflective Index (SRI): 111

PROPERTY CRRC Requirement Tropical 914PReflectance min. 0.70 min. 0.88Thermal Emittance min. 0.75 min. 0.90

Elongation ........................................................................542%Tensile Strength ...................................................................204Permeance ...........................................................................9.3Weight Solid ..........................................................................91Tack Free Tim ......................................................20-30 minutesSkin-Over Tim ......................................................10-15 minutes

Solar Reflective Index (SRI): 103

PROPERTY CRRC Requirement Tropical 904PReflectance min. 0.70 min. 0.82

Thermal Emittance min. 0.75 min. 0.91

Elongation .......................................................................213%Tensile Strength ..................................................................190Weight Solids ........................................................................85Tack Free Time ................................................... 45 minutesSkin-Over Time ..............................................30-40 minutes

Labor

Material

Small Tools

No. of Project Days

Installed Price per Sq. Ft. 17%

50

50

50

Eterna_Sil_Silicone Brochure.indd 2 7/10/16 12:18 PM

Savings

19%

20%

17%

19%