Roof Anchor Design and Testing - Mattson...

1
Roof Anchor Design and Te Mattson Macdonald Young provides structural design services for Roof Anchors. This includes anchors and used for fall protection, fall arrest, rope descent systems stages. In many cases the roof anchors are a simple stand loop, but other buildings require davits, outriggers, equipment to provide safe means of access to building e are familiar with common manufactured roof anchors, an designed custom anchors for different scenarios. MN OSHA LEGISLATION Per Minnesota law effective March 1, 2012, written docume required for roof anchors used for window washing and ext maintenance. This suggests testing all roof anchors and an inspecting their condition. Link: http://www.dli.mn.gov/WindowWashingStandard.a ANSI / IWCA STANDARDS This industry standard provides more descriptive guidance washing safety. MMY typically recommends compliance wi applicable portions of ANSI / IWCA I-14.1-2001. Link: https://www.iwca.org/store/view_product.asp?id=1 MMY SERVICES As a full-service structural engineering firm, our staff has ex many aspects of roof anchor systems: Reviewing existing roof anchor systems for complia applicable codes and industry standards Layout of anchorage points for one-person rope-des swing-stage access to building exterior. Producing drawings and specifications depicting tie drop locations. Analyzing existing rooftop structure as “natural anch Providing engineering analysis and drawings for exi roof anchors. Designing new anchorage points and their attachme existing roof structure. Testing of existing and new anchors Reporting testing results and code compliance. In addition to providing clear and complete drawings and p equipped to handle all of your design and submittal needs calculation submittals coordination with code officials professional certification bills of material specialty submittals project management: subcontracting architects, mec engineers, and other specialists as necessary. ABOUT US For 29 years, MMY has provided code compliant structures economical designs. MMY is large enough to handle big pr small enough to maintain personalized communication and coordination. We enjoy the work we do and, most importan people we work with. MMY engineers are licensed in Minn Dakota, South Dakota, Wisconsin, Iowa and more. CONTACT Contact us for an estimate on your next roof anchor design Kirk Davis, PE Mattson Macdonald [email protected] 901 North 3rd Stree 612-827-7825 Minneapolis www.mattsonmacdonald.com esting and testing tie-off points s, and swing- doff post and or custom exteriors. We nd have also entation is terior building nnually asp e for window ith 1441533 xperience in ance with scent or e-off and hors”. isting or new ent to plans, MMY is including: chanical s with rojects yet d ntly, the nesota, North n project, Young, Inc. et, Suite 100 s, MN 55401

Transcript of Roof Anchor Design and Testing - Mattson...

Roof Anchor Design and TestingMattson Macdonald Young provides structural design and testing

services for Roof Anchors. This includes anchors and tie

used for fall protection, fall arrest, rope descent systems, and swing

stages. In many cases the roof anchors are a simple standoff post and

loop, but other buildings require davits, outriggers, or custom

equipment to provide safe means of access to building exteriors.

are familiar with common manufactured roof anchors, and have also

designed custom anchors for different scenarios.

MN OSHA LEGISLATION Per Minnesota law effective March 1, 2012, written documentation is

required for roof anchors used for window washing and exterior building

maintenance. This suggests testing all roof anchors and annually

inspecting their condition.

Link: http://www.dli.mn.gov/WindowWashingStandard.asp

ANSI / IWCA STANDARDS This industry standard provides more descriptive guidancewashing safety. MMY typically recommends compliance with applicable portions of ANSI / IWCA I-14.1-2001. Link: https://www.iwca.org/store/view_product.asp?id=1441533

MMY SERVICES As a full-service structural engineering firm, our staff has experience in

many aspects of roof anchor systems:

• Reviewing existing roof anchor systems for compliance with

applicable codes and industry standards

• Layout of anchorage points for one-person rope-descent or

swing-stage access to building exterior.

• Producing drawings and specifications depicting tie

drop locations.

• Analyzing existing rooftop structure as “natural anchors”

• Providing engineering analysis and drawings for existing or new

roof anchors.

• Designing new anchorage points and their attachment to

existing roof structure.

• Testing of existing and new anchors

• Reporting testing results and code compliance.

In addition to providing clear and complete drawings and plans, MMY is

equipped to handle all of your design and submittal needs including:

• calculation submittals

• coordination with code officials

• professional certification

• bills of material

• specialty submittals

• project management: subcontracting architects, mechanical

engineers, and other specialists as necessary.

ABOUT US For 29 years, MMY has provided code compliant structures with

economical designs. MMY is large enough to handle big projects yet

small enough to maintain personalized communication and

coordination. We enjoy the work we do and, most importantly, the

people we work with. MMY engineers are licensed in Minnesota, North

Dakota, South Dakota, Wisconsin, Iowa and more.

CONTACT

Contact us for an estimate on your next roof anchor design project,

Kirk Davis, PE Mattson Macdonald Young, [email protected] 901 North 3rd Street, Suite 100 612-827-7825 Minneapolis, MN 55401 www.mattsonmacdonald.com

Roof Anchor Design and Testing

Mattson Macdonald Young provides structural design and testing

services for Roof Anchors. This includes anchors and tie-off points

protection, fall arrest, rope descent systems, and swing-

stages. In many cases the roof anchors are a simple standoff post and

loop, but other buildings require davits, outriggers, or custom

equipment to provide safe means of access to building exteriors. We

are familiar with common manufactured roof anchors, and have also

effective March 1, 2012, written documentation is

exterior building

maintenance. This suggests testing all roof anchors and annually

http://www.dli.mn.gov/WindowWashingStandard.asp

more descriptive guidance for window ly recommends compliance with

https://www.iwca.org/store/view_product.asp?id=1441533

service structural engineering firm, our staff has experience in

Reviewing existing roof anchor systems for compliance with

descent or

Producing drawings and specifications depicting tie-off and

Analyzing existing rooftop structure as “natural anchors”.

Providing engineering analysis and drawings for existing or new

Designing new anchorage points and their attachment to

In addition to providing clear and complete drawings and plans, MMY is

d to handle all of your design and submittal needs including:

management: subcontracting architects, mechanical

For 29 years, MMY has provided code compliant structures with

economical designs. MMY is large enough to handle big projects yet

small enough to maintain personalized communication and

coordination. We enjoy the work we do and, most importantly, the

MMY engineers are licensed in Minnesota, North

design project,

Mattson Macdonald Young, Inc. 901 North 3rd Street, Suite 100

Minneapolis, MN 55401