Roller Chain –ANSI
Transcript of Roller Chain –ANSI
ReliaMark roller chain is produced to meet stringent
quality specifications for materials and workmanship, en-
suring that chain length, heat treatment and tensile strength
are uniform and consistent. ReliaMark roller chain is
manufactured from carbon steel to meet or exceed ANSI
B29.1 standards. Components are case-hardened for wear
resistance and through-hardened for toughness. To select
ReliaMark roller chain according to ANSI size or pitch,
please refer to the chart on the back of this sheet.
ReliaMark products are distributed exclusively
through Kaman Industrial Technologies. For more detailed
information, visit reliamark.net. For help cross-referencing
replacement products, or for assistance with specifying
roller chain by working load and application, contact your
local Kaman Industrial Technologies sales representative at
800-526-2626 or visit www.kamandirect.com.
ReliaMark® offers standard-duty roller chain in ANSI sizes ranging from #35 through #120 in both single- and double-strand configurations. Each size isavailable in packaged lengths of 10, 50 and 100 feet.The quality and reliability of our roller chain offer MRO customers a high-value alternative for general-duty applications.
Roller Chain –ANSI
Standard-duty Roller Chain,Above-standard Performance
Visit www.reliamark.net
Your local ReliaMark distributor:
(800) 526-2626 www.kamandirect.com
Distributed exclusively by
35RIV-100FT-RM 35 0.38 3/16 *.200 0.141 0.050 0.56 0.50 0.210 1760
35RIV-50FT-RM 35 0.38 3/16 *.200 0.141 0.050 0.56 0.50 0.210 1760
35RIV-10FT-RM 35 0.38 3/16 *.200 0.141 0.050 0.56 0.50 0.210 1760
35-2RIV-50FT-RM 35-2 0.38 3/16 *.200 0.141 0.050 0.96 0.90 0.399 0.450 3520
35-2RIV-10FT-RM 35-2 0.38 3/16 *.200 0.141 0.050 0.96 0.90 0.399 0.450 3520
40RIV-100FT-RM 40 0.50 5/16 0.312 0.156 0.060 0.72 0.67 0.410 3125
40RIV-50FT-RM 40 0.50 5/16 0.312 0.156 0.060 0.72 0.67 0.410 3125
40RIV-10FT-RM 40 0.50 5/16 0.312 0.156 0.060 0.72 0.67 0.410 3125
40-2RIV-100FT-RM 40-2 0.50 5/16 0.312 0.156 0.060 1.29 1.24 0.566 0.800 6250
40-2RIV-50FT-RM 40-2 0.50 5/16 0.312 0.156 0.060 1.29 1.24 0.566 0.800 6250
40-2RIV-10FT-RM 40-2 0.50 5/16 0.312 0.156 0.060 1.29 1.24 0.566 0.800 6250
50RIV-100FT-RM 50 0.63 3/8 0.400 0.200 0.080 0.89 0.83 0.680 4880
50RIV-50FT-RM 50 0.63 3/8 0.400 0.200 0.080 0.89 0.83 0.680 4880
50RIV-10FT-RM 50 0.63 3/8 0.400 0.200 0.080 0.89 0.83 0.680 4880
50-2RIV-50FT-RM 50-2 0.63 3/8 0.400 0.200 0.080 1.60 1.55 0.713 1.320 9760
50-2RIV-10FT-RM 50-2 0.63 3/8 0.400 0.200 0.080 1.60 1.55 0.713 1.320 9760
60RIV-100FT-RM 60 0.75 1/2 0.469 0.234 0.094 1.11 1.04 0.990 7030
60RIV-50FT-RM 60 0.75 1/2 0.469 0.234 0.094 1.11 1.04 0.990 7030
60RIV-10FT-RM 60 0.75 1/2 0.469 0.234 0.094 1.11 1.04 0.990 7030
60-2RIV-50FT-RM 60-2 0.75 1/2 0.469 0.234 0.094 2.01 1.94 0.897 1.950 14060
60-2RIV-10FT-RM 60-2 0.75 1/2 0.469 0.234 0.094 2.01 1.94 0.897 1.950 14060
80RIV-100FT-RM 80 1.00 5/8 0.625 0.312 0.125 1.44 1.32 1.730 12500
80RIV-50FT-RM 80 1.00 5/8 0.625 0.312 0.125 1.44 1.32 1.730 12500
80RIV-10FT-RM 80 1.00 5/8 0.625 0.312 0.125 1.44 1.32 1.730 12500
80-2RIV-50FT-RM 80-2 1.00 5/8 0.625 0.312 0.125 2.59 2.47 1.153 3.370 25000
80-2RIV-10FT-RM 80-2 1.00 5/8 0.625 0.312 0.125 2.59 2.47 1.153 3.370 25000
100RIV-100FT-RM 100 1.25 3/4 0.750 0.375 0.156 1.73 1.61 2.510 19530
100RIV-50FT-RM 100 1.25 3/4 0.750 0.375 0.156 1.73 1.61 2.510 19530
100RIV-10FT-RM 100 1.25 3/4 0.750 0.375 0.156 1.73 1.61 2.510 19530
100-2RIV-50FT-RM 100-2 1.25 3/4 0.750 0.375 0.156 3.14 3.02 1.408 4.910 39060
100-2RIV-10FT-RM 100-2 1.25 3/4 0.750 0.375 0.156 3.14 3.02 1.408 4.910 39060
120RIV-50FT-RM 120 1.50 1 0.875 0.437 0.187 2.14 2.00 3.690 28125
120RIV-10FT-RM 120 1.50 1 0.875 0.437 0.187 2.14 2.00 3.690 28125
120-2RIV-50FT-RM 120-2 1.50 1 0.875 0.437 0.187 3.93 3.79 1.789 7.350 56250
120-2RIV-10FT-RM 120-2 1.50 1 0.875 0.437 0.187 3.93 3.79 1.789 7.350 56250
* Chains are rollerless — dimension shown is bushing size
Dimensions are in inches and pounds
Link Minimum Part ANSI Pitch Roller Roller Pin Plate Weight Tensile
Number Number Inches Width Diam. Diam. Thickness C R K per foot Strength
Standard-DutyRoller ChainBuilt in accordance withANSI B29.1.
C
R
ROLLERWIDTH
ROLLERDIAMETER
PITCH
C
K
R
ROLLERWIDTH
ROLLERDIAMETER
PITCH
FORM # 70313 ©2009 Kaman Industrial Technologies Corporation. All rights reserved.
Single-Strand
Double-Strand