Roller Blinds - Olssons Persienner & Markiser ner...Roller Blinds Large – RL The large roller...
Transcript of Roller Blinds - Olssons Persienner & Markiser ner...Roller Blinds Large – RL The large roller...
Roller Blinds
Roller Blinds Small – RS
Benthin’s small roller blind system is designed for roller blinds with a small roll diameter and offers an aesthetically pleasing solution for smaller windows.The size of the roller blind is in complete harmony with the size of the window.
A patented spring loaded thrust bearing with a locking function ensures easy, convenient installation using brackets.
The spring mechanism makes the roller blind easier to fit and anyinaccuracies in the spacing between the brackets can be evened out.
There is a side guide profile with optional brush sealing to match the cassette profile.
Wide range of control options
In addition to the manual control options of side pull with chain or cord and spring operation, the small roller blind can also be equipped with a 24 volt motor.
With the adjustable cord holder the discreet cord guide can be fitted at the side on the wall or embrasure, or on the floor for that matter.The cord holder is equally suitable for medium roller blinds.
2
Simple mountingwith fixing profile
No matter whether wall or ceiling mounting is being used, the roller blind with fixing profile simply clips into the clip fixing as a complete unit.
The flat mounting clip enables the blind to be put up quickly and easily with the smallest possible gap to the wall/ceiling.
Discreet cassette profile
A round, two-piece cassette fits in perfectly with the surroundingsand can be mounted quickly andeffortlessly on the wall or ceiling using clips.
Roller Blinds Medium – RM
The medium roller blind system offers a wide range of options and models.
Flexible cover solutions, bracketsor carrier profile, round and squarecassettes with coordinated tube shafts and control options makethe medium roller blind system the perfect solution for virtually every need.
For optimum dim-out the fabric is guided in the side profile by means of the bottom bar end caps.Tight brushes can also be inserted in the rails.
Patented shafts (Ø29/Ø38 mm) with eccentric internal contouring even out tolerances, ensuring that the components sit firmly and securely.
Ease of operation
Tried and tested Ø4,5 x 6,0 mm chain operation is also available with matt ball chains for acontemporary, timeless look.An unobtrusive chain stopper and elegant chain connector, which can also be used as a stopper, areavailable to match.
In addition to the spring operation there is also the option ofcrank operation for larger loadsand improved safety.With this option a double end stop makes it possible to set a top posi-tion as well as the bottom position.
The convenient motor solutionsinclude various 24 volt motors as well as a 230 volt version.
Mounting alternatives
Cassette profiles and fixing profiles mount quickly and easily on wall or ceiling using clips.The fixing profile can also beconveniently mounted using analuminium bracket with screw,while there is an aluminium angle with screw for the cassettes.
The double-sided closing profileis flat on one side and round on the other for use with different roller blind types.The bottom bar attaches to thefabric quickly and firmly with a self adhesive spline and can easily be weighted for light blinds.
3
Roller Blinds Large – RL
The large roller blind system is the solution for all roller blinds with a large surface area of up to 16 m2.It can be fitted with heavy fabrics and offers ideal design options for modern architecture with its ever larger areas of glass.
The system also includes flexible cover and cassette options, as well as side guides to meet every requirement.
A sophisticated shaft system with three diameters and various adapt-ers means that the gear and thrust bearing are suitable for all shaft diameters.
There is a choice of two closingprofiles, which can be flexibly weighted.
Control options
A smooth-running chain drive can be operated with a Ø6 x 12 mm or Ø4,5 x 6 mm plastic ball chainin all colours, or with a Ø4,5 mm metal ball chain.
Auxiliary springs or planetary gears ensure that even heavy blinds can be operated effortlessly.
Alternatively there is a crank drive with a ratio of 3:1.A double end stop makes it possible to set a top position as well as the bottom position.
A selection of various 230 voltmotors offers the most convenientoption for operating large rollers.
Simple, secure installation
Special bracket inserts can be turned through 360°, enabling the bracket to be aligned and positioned accurately.
Variable mounting with a bracket makes secure, concealed attach-ment to wall or ceiling possible.
An adjustable thrust bearing allows shaft alignment, enabling mounting inaccuracies of up to 4 mm in each direction to be evened out.
All types can be coupled together and an adjustable endplug offers the option of setting all blinds to exactly the same height.
4
The Roller Blind SystemRoller blinds in all sizes
With Small, Medium and Large,Benthin’s roller blind systems offer three size ranges and therefore the right solution for every requirement.
Each system includes a suitableselection of specific types, which differ with regard to their control options, configurations and possible applications.
Perfect customisation to thearchitectural setting in terms of design, operation, safety andappearance is guaranteed in every case.
Thanks to their modular concept with as small a number ofcomponents as possible, Benthin’s roller blinds ensure stocking and manufacturing efficiency.
All the components, covers, cassettesand side guides are marked out by their elegant, discreet design,making integration with any window possible.
Premium materials and certified quality guarantee perfectfunctioning and an attractive,first-rate roller blind.
Visible components and profiles match each other perfectly.
All profiles are anodised in silver or powder-coated in white, black or beige, with grey also being available in the case of the large system.The plastic components come in white, grey, black or beige to match.
5
Bracket Cassetteround
Cassetteangular
Roller Blinds Medium – RM
Roller Blinds System
Roller Blinds Small – RS
BracketFixingprofile
Cover flatBracket
Cover flatfixing profile
Fixingprofile
Cover roundBracket
Cover roundfixing profile
1,80 x 2,50 mmax. dimension 2,80 x 3,00 m 2,80 x 3,00 m2,80 x 3,00 m1,80 x 2,50 m 2,80 x 3,00 m 2,80 x 3,00 m2,80 x 3,00 m 2,80 x 3,00 m 2,80 x 3,00 m
Spring
Chain
Cord
Motor
Crank
Cordguiding
Sideprofile
RS01RS05
RS11RS15
RM01RM06RM07
RL01RL06RL07
RL01RL06RL07
RM11RM16RM17
RM21RM26RM27
RM31RM36
RM21RM26RM27
RM31RM36
RM41RM46RM47
RM61RM66RM67
RM51RM56RM57
RM71RM76RM77
RM01RM06RM07
RM11RM16RM17
RM21RM26RM27
RM31RM36
RM41RM46RM47
RM61RM66RM67
RM51RM56RM57
RM71RM76RM77
RS01
4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m
RL01
RL06
RL07
RL21RL26RL27
RL21
RL26
RL27
RL31RL36RL37
RL31
RL36
RL37
RL61RL66RL67
RL61
RL66
RL67
RL71RL76RL77
RL21RL26RL27
RL31RL36RL37
RL21RL26RL27
RL31RL36RL37
RL61RL66RL67
RL71RL76RL77
RL71
RL76
RL77
RS11 RM01 RM11 RM21 RM31 RM41 RM61 RM51 RM71
RS02 RS12 RM02 RM12 RM22 RM32 RM42 RM62 RM52 RM72
RS05 RS15
Cassetteround
Bracket
Roller Blinds Large – RL
Cassetteround
Cassetteangular
Cover flatfixing profile
Cover roundfixing profile
1,80 x 2,00 m
RS21RS26
RS21RS26
RS21
RS22
RS26 RM06 RM16 RM26 RM36 RM46 RM66 RM56 RM76
RM07 RM17 RM27 RM47 RM67 RM57 RM77
Sid
e g
uid
ing
Opera
tion
Oth
ers
Coupling
6
Bracket Cassetteround
Cassetteangular
Roller Blinds Medium – RM
Roller Blinds System
Roller Blinds Small – RS
BracketFixingprofile
Cover flatBracket
Cover flatfixing profile
Fixingprofile
Cover roundBracket
Cover roundfixing profile
1,80 x 2,50 mmax. dimension 2,80 x 3,00 m 2,80 x 3,00 m2,80 x 3,00 m1,80 x 2,50 m 2,80 x 3,00 m 2,80 x 3,00 m2,80 x 3,00 m 2,80 x 3,00 m 2,80 x 3,00 m
Spring
Chain
Cord
Motor
Crank
Cordguiding
Sideprofile
RS01RS05
RS11RS15
RM01RM06RM07
RL01RL06RL07
RL01RL06RL07
RM11RM16RM17
RM21RM26RM27
RM31RM36
RM21RM26RM27
RM31RM36
RM41RM46RM47
RM61RM66RM67
RM51RM56RM57
RM71RM76RM77
RM01RM06RM07
RM11RM16RM17
RM21RM26RM27
RM31RM36
RM41RM46RM47
RM61RM66RM67
RM51RM56RM57
RM71RM76RM77
RS01
4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m
RL01
RL06
RL07
RL21RL26RL27
RL21
RL26
RL27
RL31RL36RL37
RL31
RL36
RL37
RL61RL66RL67
RL61
RL66
RL67
RL71RL76RL77
RL21RL26RL27
RL31RL36RL37
RL21RL26RL27
RL31RL36RL37
RL61RL66RL67
RL71RL76RL77
RL71
RL76
RL77
RS11 RM01 RM11 RM21 RM31 RM41 RM61 RM51 RM71
RS02 RS12 RM02 RM12 RM22 RM32 RM42 RM62 RM52 RM72
RS05 RS15
Cassetteround
Bracket
Roller Blinds Large – RL
Cassetteround
Cassetteangular
Cover flatfixing profile
Cover roundfixing profile
1,80 x 2,00 m
RS21RS26
RS21RS26
RS21
RS22
RS26 RM06 RM16 RM26 RM36 RM46 RM66 RM56 RM76
RM07 RM17 RM27 RM47 RM67 RM57 RM77
Sid
e g
uid
ing
Opera
tion
Oth
ers
Coupling
Typeoverview Roller Blinds
Documentation for all needs
Benthin provides a comprehensive range of documentary material to make it easy for you to get started with a product.Detailed in-depth referencedocuments enable our customersto build strong product knowledgeon all models.
Component Catalogue
Lists all components with information about article numbers, delivery times and order quantities.
Additional exploded drawings with item numbers help with ordering and provide an overview.
Data sheets
Contain detailed information about each model. These may be used for general information purposes or when compiling order documents. They provide information for architects, as well as for manufacturers.
Assembly
Fabrication instructions.A step-by-step guide with detailed figures and descriptions.
Installation instructions
A helpful guide describing, in words and pictures, how to install, operate and care for roller blinds.
Bracket Cassetteround
Cassetteangular
Roller Blinds Medium – RM
Roller Blinds System
Roller Blinds Small – RS
BracketFixingprofile
Cover flatBracket
Cover flatfixing profile
Fixingprofile
Cover roundBracket
Cover roundfixing profile
1,80 x 2,50 mmax. dimension 2,80 x 3,00 m 2,80 x 3,00 m2,80 x 3,00 m1,80 x 2,50 m 2,80 x 3,00 m 2,80 x 3,00 m2,80 x 3,00 m 2,80 x 3,00 m 2,80 x 3,00 m
Spring
Chain
Cord
Motor
Crank
Cordguiding
Sideprofile
RS01RS05
RS11RS15
RM01RM06RM07
RL01RL06RL07
RL01RL06RL07
RM11RM16RM17
RM21RM26RM27
RM31RM36
RM21RM26RM27
RM31RM36
RM41RM46RM47
RM61RM66RM67
RM51RM56RM57
RM71RM76RM77
RM01RM06RM07
RM11RM16RM17
RM21RM26RM27
RM31RM36
RM41RM46RM47
RM61RM66RM67
RM51RM56RM57
RM71RM76RM77
RS01
4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m
RL01
RL06
RL07
RL21RL26RL27
RL21
RL26
RL27
RL31RL36RL37
RL31
RL36
RL37
RL61RL66RL67
RL61
RL66
RL67
RL71RL76RL77
RL21RL26RL27
RL31RL36RL37
RL21RL26RL27
RL31RL36RL37
RL61RL66RL67
RL71RL76RL77
RL71
RL76
RL77
RS11 RM01 RM11 RM21 RM31 RM41 RM61 RM51 RM71
RS02 RS12 RM02 RM12 RM22 RM32 RM42 RM62 RM52 RM72
RS05 RS15
Cassetteround
Bracket
Roller Blinds Large – RL
Cassetteround
Cassetteangular
Cover flatfixing profile
Cover roundfixing profile
1,80 x 2,00 m
RS21RS26
RS21RS26
RS21
RS22
RS26 RM06 RM16 RM26 RM36 RM46 RM66 RM56 RM76
RM07 RM17 RM27 RM47 RM67 RM57 RM77
Sid
e g
uid
ing
Opera
tion
Oth
ers
Coupling
7
Bracket Cassetteround
Cassetteangular
Roller Blinds Medium – RM
Roller Blinds System
Roller Blinds Small – RS
BracketFixingprofile
Cover flatBracket
Cover flatfixing profile
Fixingprofile
Cover roundBracket
Cover roundfixing profile
1,80 x 2,50 mmax. dimension 2,80 x 3,00 m 2,80 x 3,00 m2,80 x 3,00 m1,80 x 2,50 m 2,80 x 3,00 m 2,80 x 3,00 m2,80 x 3,00 m 2,80 x 3,00 m 2,80 x 3,00 m
Spring
Chain
Cord
Motor
Crank
Cordguiding
Sideprofile
RS01RS05
RS11RS15
RM01RM06RM07
RL01RL06RL07
RL01RL06RL07
RM11RM16RM17
RM21RM26RM27
RM31RM36
RM21RM26RM27
RM31RM36
RM41RM46RM47
RM61RM66RM67
RM51RM56RM57
RM71RM76RM77
RM01RM06RM07
RM11RM16RM17
RM21RM26RM27
RM31RM36
RM41RM46RM47
RM61RM66RM67
RM51RM56RM57
RM71RM76RM77
RS01
4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m
RL01
RL06
RL07
RL21RL26RL27
RL21
RL26
RL27
RL31RL36RL37
RL31
RL36
RL37
RL61RL66RL67
RL61
RL66
RL67
RL71RL76RL77
RL21RL26RL27
RL31RL36RL37
RL21RL26RL27
RL31RL36RL37
RL61RL66RL67
RL71RL76RL77
RL71
RL76
RL77
RS11 RM01 RM11 RM21 RM31 RM41 RM61 RM51 RM71
RS02 RS12 RM02 RM12 RM22 RM32 RM42 RM62 RM52 RM72
RS05 RS15
Cassetteround
Bracket
Roller Blinds Large – RL
Cassetteround
Cassetteangular
Cover flatfixing profile
Cover roundfixing profile
1,80 x 2,00 m
RS21RS26
RS21RS26
RS21
RS22
RS26 RM06 RM16 RM26 RM36 RM46 RM66 RM56 RM76
RM07 RM17 RM27 RM47 RM67 RM57 RM77
Sid
e g
uid
ing
Opera
tion
Oth
ers
Coupling
DescriptionBeschreibungDescription
Pieces – MetreStück – MeterPièces – Mètre
Part No.Art.-Nr.Réf-Nº
Delivery TimeLieferzeitDélai de livraison
Rollers Small and Medium • S & M - Rollos • Rouleaux S & M
ColourFarbe
Couleur
Deliv
ery
time/
Lief
erze
it/Dé
lai d
e liv
rais
on: A
= a
t sto
ck/a
b La
ger/e
n st
ock
• B
= m
ax. 3
wee
ks/m
ax. 3
Woc
hen/
3 se
mai
nes
max
. • C
= o
n in
quiry
/auf
Anf
rage
/sur
dem
ande
Version 12-12-20 11
M
M
M
Profiles • Profile • Profilés
S
S
RSM 11Basic profile • Basisprofil • Profilé de base / 40 x 52 mm
anodised • eloxiert • anodisé 5.8 mwhite • weiß • blanc 5.8 mblack • schwarz • noir 5.8 mbeige • beige • beige 5.8 m
58 m58 m58 m58 m
94105161941051719410517294105173
AABB
Front profile, cassette round • Frontprofil, Kassette rund • Profilé de face, coffre arrondi / 40 x 54 mm
anodised • eloxiert • anodisé 5.8 mwhite • weiß • blanc 5.8 mblack • schwarz • noir 5.8 mbeige • beige • beige 5.8 m
58 m58 m58 m58 m
94105181941051919410519294105193
AABB
Basic profile • Basisprofil • Profilé de base / 45 x 63 mm
anodised • eloxiert • anodisé 5.8 mwhite • weiß • blanc 5.8 mblack • schwarz • noir 5.8 mbeige • beige • beige 5.8 m
58 m58 m58 m58 m
2476176 AABB
Front profile, cassette round • Frontprofil, Kassette rund • Profilé de face, coffre arrondi / 52 x 75 mm
anodised • eloxiert • anodisé 5.8 mwhite • weiß • blanc 5.8 mblack • schwarz • noir 5.8 mbeige • beige • beige 5.8 m
58 m58 m58 m58 m
2476175 AABB
Front profile, cassette angular • Frontprofil, Kassette eckig • Profilé de face, coffre angulaire / 48 x 73 mm
anodised • eloxiert • anodisé 5.8 mwhite • weiß • blanc 5.8 mblack • schwarz • noir 5.8 mbeige • beige • beige 5.8 m
58 m58 m58 m58 m
2476180 AABB
0000060906190605
0000060906190605
0000060906190605
26 Version 30-11-2011
Type RM21 Ø29 mm tube shaft
Typ RM21 Ø29 mm Rohrwelle
Type RM21 Ø29 mm axe tubulaire
RM21
2475175
2475147
2475009
2476155
2476061
93005695
94105122
96816000
2476175
2475190
2475325
2475174
2476176
94000005
2475172
2423155
2476101
2476174
2476058
© 2011 Benthin® . Druckfehler, Irrtümer und Änderungen vorbehalten . Version 20-12-2011 .
RM21 - Medium Rollo mit runder Kassette und Kettenbedienung. Optional Seilführung und Profilführung.
Typ RM21
Rollobreite
Rol
lohö
he
Rollobreite
-47 mmRollobreite
-43 mm
Bed
ienu
ngsh
öhe
Größen/Anlagenmaße • Breite : min. 0,30 m max. 2,80 m (stoffabhängig) max. 1,40 m pro Anlage bei Kopplung zweier Rollos (stoffabhängig) max. 0,90 m pro Anlage bei Kopplung dreier Rollos (stoffabhängig) • Höhe : max. 3,00 m (stoffabhängig) max. Bremskraft 4,5 kg • Behang : max. 4,5 kg • Koppeln : bis zu 3 Anlagen des selben Typs mit einer Bedienung, optional Pendelsicherung Antrieb/Mechanik • Seitenzuggetriebe mit Abrollsicherung durch Servokupplung.
Die Servokupplung ermöglicht die exakte, stufenlose Positionierung des Behanges in jeder gewünschten Stellung. • Kassette rund (78 x 80 mm) aus stranggepreßtem Aluminium (Al Mg Si 0,5 F22) montiert auf den runden Endkappen. • Aluwelle (Ø29,0 / Ø38,0 mm) aus stranggepreßtem Aluminium (Al Mg Si 0,5 F22). • Stahlwelle (Ø27,4 / Ø36,0 mm) Wandstärke 0,40 mm (EN 139). • Abschlussprofil (13 x 29 mm) aus stranggepreßtem Aluminium (Al Mg Si 0,5 F22), einsetzbar für Pendelsicherung oder Seitenprofil, Bürstenabdichtung möglich. Zusatzbeschwerung durch Ø5 mm und/oder 4 x 8 mm Stahlprofil möglich. • Kunststoffteile aus hochwertigem, UV-beständigem, temperaturbeständigem und abriebfestem Kunststoff. • Seilführung bis max. 15° Neigung. Stahlseil (Ø0,8 mm) Kunststoffummantelt in schwarz, grau und weiß (Ø1,0 mm). • Profilführung (26 x 46 mm) aus stranggepreßtem Aluminium (Al Mg Si 0,5 F22).
Die Endkappen des Abschlußprofils werden im Seitenprofil geführt. Der Behang reicht zu beiden Seiten 20 mm in die Profilführung. Bürstenabdichtung (Florhöhe 9 mm) innen und außen möglich (je nach Montageart). Bedienung • Manuelle Bedienung
durch Endloskugelkette (Ø4,5 x 6,0 mm) aus Kunststoff auf Polyesterschnur 1,4 mm in grau, weiß, schwarz und beige oder mit gefrosteter Oberfläche in transparent, grau, schwarz und beige. Optional Metallkugelkette (Ø4,5 x 6,0 mm) aus vernickeltem Messing oder rostfreiem Stahl. • Beschwerung durch Gewicht für Kugelkette (Stahlkern in Kunststoffgehäuse) möglich. • Bedienungsseite: wahlweise links oder rechts. • Bedienungshöhe: 0,75 x Rollohöhe (oder frei wählbar). • Endlagenbegrenzung durch Kettenstopper.
Rollobreite
-92 mm
© 2011 Benthin® . Druckfehler, Irrtümer und Änderungen vorbehalten . Version 20-12-2011 .
RM21 - Medium Rollo mit runder Kassette und Kettenbedienung. Optional Seilführung und Profilführung.
Typ RM21
Wand-BefestigungDecken-Befestigung
Maße
Montage
Farben • Kassette rund (78 x 80 mm): technisch eloxiert nach E6/EV1 in silber oder pulverbeschichtet weiß (RAL 9016), schwarz (RAL 9005) und beige (RAL 1015). • Abschlussprofil (13 x 29 mm) technisch eloxiert nach E6/EV1 in silber oder pulverbeschichtet weiß (RAL 9016), schwarz (RAL 9005) und beige (RAL 1015). • Profilführung (26 x 46 mm) technisch eloxiert nach E6/EV1 in silber oder pulverbeschichtet weiß (RAL 9016), schwarz (RAL 9005) und beige (RAL 1015). • Träger: verzinkter Stahl oder weiß (RAL 9016).
Montage • Clip Montage an Wand oder Decke. • Seilführung direktes Anschrauben des Halters (Kunststoff).
19,52
max
. Ø56
79
80
32
13
29
max
. Ø56
30
78
81
13
29
19 4,5
43,4
Clip für Kassette und Seitenprofil Montage
© 2011 Benthin® . Druckfehler, Irrtümer und Änderungen vorbehalten - 5 - Version 19-01-2011
EinbauGegenlager und Getriebe
Verwendung von Wellenadaptern
Einsetzen des Gegenlagers
Das Gegenlager bis zum Anschlag in die Welle einschieben (auf links/rechts achten).
Einsetzen des Gegenlagers Ø 43 mm Welle
Bei der Aluminium-Welle mit 43 mm Durch-messer darauf achten, dass die Stege beim Einsetzen des Gegenlages richtig positioniert sind.
Einsetzen des Getriebes
Das Getriebe bis zum Anschlag in die Welle einschieben.
Einsetzen des Getriebes Ø 43 mm Welle
Bei der Aluminium-Welle mit 43 mm Durch-messer darauf achten, dass die Stege beim Einsetzen des Getriebes richtig positioniert sind.
Je nach Wellendurchmesser ist der Einsatz von Adaptern erforderlich.
Gegenlager und Getriebe Typ RS passen in Stahlwellen Ø 25 mm, Ø 27 mm oder Aluminiumwelle Ø 29 mm. Gegenlager und Getriebe Typ RM passen in Stahlwelle Ø 36 mm oder Aluminiumwellen Ø 38 mm, Ø 43 mm.
Die Adapter werden auf das Gegenlager/Getriebe geschoben und leicht gedreht, so dass sie einrasten.
CLICK CLICK
© 2011 Benthin® . Druckfehler, Irrtümer und Änderungen vorbehalten - 4 - Version 19-01-2011
ArbeitsvorbereitungGegenlager und Getriebe
Excentrisches Gegenlager zusammenstecken
Kette/Schnur in das Getriebe einfädeln
Um die Montage zu erleichtern, das Getrie-be auf einen Halter (Art.-Nr. 24757290000) setzen.
Kette/Schnur in das Getriebe einfädeln (2)
Die Aussparung am Getrieberad dient zur ein-fachen Führung der Kette/Schnur. Diese so in Position drehen, dass die Kette/Schnur leicht eingesetzt werden kann.
Kette/Schnur in das Getriebe einfädeln (3)
Nach dem einsetzen der Kette/Schnur diese stramm ziehen...
Kette/Schnur in das Getriebe einfädeln (4)
...und durch drehen des Getriebes einfädeln.
Die exzentrischen Gegenlager bestehen aus zwei Komponenten, die zusammengesteckt werden. Je nach Montageseite darauf achten, dass das „L“ (links) bzw. das „R“ (rechts) auf dem transparenten Teil lesbar ist. Beide Teile wie auf dem Foto gezeigt zusammendrücken.
Ich bin fest überzeugt, dass diese Zeichnung richtig ist!Weitere Schritte (Einsetzen in die Kassette) wären sonst schlecht möglich.
Kassette • Cassette • Coffre
4
5
6
7
ba
b
a
7
Kassette • Cassette • Coffre
6
<150
<1000
<150
<150
<1000
<150
3094
30
27
111 59
22
27
11394
38 30
18
2
111
59
30
36
119
2
111
59
30
9438 30
36
18 2119
2
113
Roller Blinds Small – RS
•Width : max. 1.80m
• HeightCassetteround : max. 2.00m
• HeightBracket/Fixingprofile : max. 2.50m
• Brakecapacity : max. 2.5kg
• Tubeshaft : Ø20/Ø29mm
• Closingprofile : 11x23mm
• Bracket : 55x39mm
• Cassetteround : 63x57mm
Roller Blinds Medium – RM
•Width : max. 2.80m
• Height : max. 3.00m
• Brakecapacity : max. 5.0kg
• Tubeshaft : Ø29/Ø38/Ø44mm
• Closingprofile : 13x29mm
• Bracket : 64x55mm
• Cassetteround : 80x78mm
• Cassetteangular : 75x77mm
Roller Blinds Large – RL
•Width : max. 4.00m
• Height : max. 4.00m
• Brakecapacity : max. 12.0kg
• Tubeshaft : Ø43/Ø52/Ø65mm
• Closingprofile : 18x36mm
• Closingprofile : 14x28mm
• Bracket : 85x60mm
• Cassetteround : 118x113mm
• Cassetteangular : 118x102mm
BenthinGmbH
Osterstader Str. 16
D-27572 Bremerhaven
T +49 471 79 84 0
F +49 471 79 84 111
Benthin
PondwoodHouse
Pondwood Close
Moulton Park Ind. Estate
Northampton NN3 6RT
T +44 1604 490580
F +44 1604 648446
Benthin Systèmes E.U.R.L
27, Avenue de Montboulon
FR-77165 St. Soupplets
T +33 1 60 61 56 56
F +33 1 60 01 57 11
www.benthin.com© 2012 Benthin® . Misprints, errors and changes excepted . Version 21-02-2012 . 97000220