Robotstudio tutorial on Synchronize to VC and simulation setup
9
Lesson 6 Synchronize with the virtual controller Simulation setup Start the simulation 1 www.cad.gidinceanu.com
-
Upload
cristian-gidinceanu -
Category
Documents
-
view
1.763 -
download
0
description
http://www.cadblog.info
Transcript of Robotstudio tutorial on Synchronize to VC and simulation setup
www.cad.gidinceanu.com 1
Lesson 6Synchronize with the virtual controller
Simulation setupStart the simulation
www.cad.gidinceanu.com 2
www.cad.gidinceanu.com 3
www.cad.gidinceanu.com 4
www.cad.gidinceanu.com 5
www.cad.gidinceanu.com 6
www.cad.gidinceanu.com 7
www.cad.gidinceanu.com 8
Remember!
To create a program in RobotStudio you have to:
1. Create a new station2. Import the objects3. Create targets and paths4. Synchronize to Virtual Controller5. Simulation SetupAnd start and check the simulation
www.cad.gidinceanu.com 9
In our further tutorials we will talk about:
Create a collision set;Create a station with 2 robotsRAPID programAbout creating parts in RSTeach Pendant
For more information about RobotStudio you have to check the manual! In the manual you will find a lot of things that I didn’t explain or used in my tutorials.
If you have any questions about RobotStudio please send me a mail at:[email protected]
