Robert White 4401 Andrew Drive N.E. Albuquerque, New Mexico 87109 Phone: (505) 850-6733 Email: whiterobertart@aol.com PROFESSIONAL EXPERIENCE: (2013-present) Coreslab Structures ABQ Inc. 505-247-3725 2800 2nd Street SW Albuquerque, NM 87102 Supervisor: Gilbert Lopez,Contact: Yes Estimator/Engineering Technician: Estimator, using an Excel spread sheet. Do take-offs, estimates and submittals. Enter shop tickets. Supervise the welding shop and inspections of all steel products i.e. welding imbeds, bridge girder sole plates. Produce process control data to calculate time to produce each product. Track form inventory on Excel. Produce and maintain Fixed assets list. Produce and maintain Vendor lists. Map and layout the plant facilities on AutoCAD 2007, showing all details of plant construction including: gas lines, steam lines, water lines, electrical lines and every other critical part of the plant which had never been documented before, and is necessary for PCI certification. (2013) Lowe's 201 Buffalo Mountain Road Silverthorne, Colorado 80498 970-968-4000 Supervisor: John Denim, Contact: Yes Customer Sales Associate: Worked in the Tool and Hardware departments assisting customer's with questions about tools and their application which are required for their needs. Also, used all computerized equipment for real-time inventory control and labeling. Note: this is a seasonal position which ended in September. (2006-2010) Coreslab Structures ABQ Inc. 2800 2nd Street SW Albuquerque, NM 87102 505-247-3725 Supervisor: Steve Ruiz, Contact: Yes Project Manager/Project Scheduler & Coordinator: Managed the precast-concrete construction aspect of approximately 300 hundred projects throughout New Mexico, Colorado, Texas and Arizona. Acting as liaison between Coreslab Structures Inc. and the general contractor, maintained an understanding of the scope of work conveyed in the Project award notice. I attended preconstruction meetings and visited the customer's job site to discuss their drawings, schedules for delivery and the procedures used in the erection of the precast concrete. After compiling information, I chaired bimonthly plant project meetings with Coreslab's: General manager, engineers, plant manager, sales staff and the dispatching personnel. Other responsibilities included addressing: LEED requirements, RFI's, change orders, engineering problems, design submittals, field service, collection-closeout issues and the associated reports with each project. Used Microsoft: Outlook, Excel, and Word to monitor and coordinate the projects while managing up to 30 active jobs at one time. These projects included almost all of the major construction jobs in New Mexico, e.g. the San Mateo bridge over I-40, the new Radiation Laboratory and Utility Office Building (RLUOB) at Los Alamos National Laboratories (LANL), US Army Corps of Engineers Navajo Preparatory School/Dormitories, Albuquerque Waste Water Treatment plant, an Federal Law Enforcement Training Center (FLETC) dormitories in Artesia, to name a few.

(2006) Choice Steel Inc. 7100 2nd Street NW Albuquerque, NM 87107 505-344-4940 Supervisor: Clayton Nunnally, Contact: Yes Auto CAD Technician: Processed the customers' requests for steel products to be cut on a CNC plasma arc cutting the machine. Made AutoCAD files/drawings that the CNC cutting machine could read. Used nesting programs that utilized steel plates in the most efficient manner to minimize waste. Used the programs: ProNest and AutoDesk/AutoCAD 2000. (2001- 2005) Monster Hand Trucks Inc. 6139 Darnell Street Houston, TX 77074 Contact: NA Founder, President and Project Manager of Monster Hand Trucks Incorporated: S-corporation established on patent pending specialized hand truck design using 4 coaxially mounted wheels. Along with selling to the general public, via website/online sales, Mechanical Equipment Co. (MECO) purchased over 100 of these hand trucks to move water purification equipment over rough and sandy terrain in Iraq. The end users being the U.S. Army and United Kingdom. (2000) Frazer Inc. 7219 Rampart Street Houston, TX 77036 713-772-5511 Supervisor: John Griffin Sr., Contact: Yes AutoCAD Technician, Shop Leadman, Hydraulics-Technician, and Facilities Manager:: Involved with the construction and servicing of electrical and hydraulically driven oil-field and geophysical equipment from conception to completion. This equipment was used for offshore oil exploration. Products included: seismic cable reels, winches, and float-mounted equipment. Supervised the construction of hydraulically driven oil-field and geophysical equipment from conception to completion. This equipment was used for offshore oil exploration. As Facilities Manager, I organized the maintenance of plant equipment and facilitated the efficiency of plant production. (1986- 2000) Self Employed Steel Fabricator 6139 Darnell Street Houston, TX 77074 Contact: NA Steel Fabricator: Provided a 24-hour portable welding service and completed hundreds of various types of steel fabrication projects: pipe welding, drilling site work, and heavy equipment repair jobs e.g. excavator buckets and grapples, booms, etc. Developed and fabricated special apparatuses for the demolition industry. Some of these jobs included hundreds of road-boring projects, i.e. welding 12-inch to 36-inch steel pipe casing that was pushed or pulled under freeways and city streets for shielding communication and telephone cables. American Welding Society (AWS) School certified in TIG, MIG, Shielded Arc and Oxy-Acetylene. EDUCATION Bachelor of Science, University of Houston, Electrical Power Technology (BSET) AWS Certification in the Welding Trades, Albuquerque Technical Vocational Institute