ROAD-RATEDROAD-RATED PDFS/Asphalt Milling...ROAD-RATEDROAD-RATED Since 1975, Beltservice Corporation...
2
ROAD-RATED ROAD-RATED Since 1975, Beltservice Corporation has been manufacturing custom conveyor belting specifically designed to handle the rigors of the asphalt industry. The key to increased life and less downtime is our “Integrally Molded” cleating process. This proven production method features uncured cleats that are molded into our uncured belt. The cleat and belt becomes one homogeneous unit. • Popular sizes are in stock at several locations for immediate shipment • Designed to meet or exceed OEM standards • Versatile profile designs allow for pattern heights from 1/2” to 1-1/4” tall • Special splicing techniques produce a virtually seamless joint A SPHALT M ILLING C ONVEYOR B ELTS A SPHALT M ILLING C ONVEYOR B ELTS Primary Belts (Lower) Secondary Belts (Upper) A DIVISION OF BELTSERVICE ® FabClimb
Transcript of ROAD-RATEDROAD-RATED PDFS/Asphalt Milling...ROAD-RATEDROAD-RATED Since 1975, Beltservice Corporation...
ROAD-RATEDROAD-RATED
Since 1975, Beltservice Corporation has been manufacturing custom conveyor belting specifically designed to handle the rigors of the asphalt industry. The key to increased life and less downtime is our “Integrally Molded” cleating process. This proven production method features uncured cleats that are molded into our uncured belt. The cleat and belt becomes one homogeneous unit.
• Popular sizes are in stock at several locations for immediate shipment• Designed to meet or exceed OEM standards• Versatile profile designs allow for pattern heights from 1/2” to 1-1/4” tall• Special splicing techniques produce a virtually seamless joint
ASPHALT MILLING CONVEYOR BELTSASPHALT MILLING CONVEYOR BELTS
Primary Belts(Lower)
Secondary Belts(Upper)
A DIVISION OF BELTSERVICE
®
FabClimb
Fabflex Division696 W. Amity Rd, Boise, ID 83705PH: 800-423-4469 or Fax: [email protected], www.beltservice.com
31”
13”
Belt Width 32” - 47¼”
FabClimb 1¼” Tall
®A DIVISION OF BELTSERVICE
DISTRIBUTED BY:
Longhorn 1” Tall
Belt Width: 12” - 60”Cleat Width:
12” - 48”(In 6” Increments)
Bighorn ¾” Tall
Cleat Width 12” - 48”
9”
Belt Width 12” - 60”
• Super-Screw fasteners• Vulcanized endless splice• Flexco Meg Alloy 550
• 8” - 10” minimum pulley diameters• Tapered cleat ends for smooth transistions• Available in three belt constructions
Splicing Options
FabClimb 1¼” Tall
Belt Width 24” - 39 ”23”
12”
8
All sales are subject to Beltservice's standard terms of sale contained in its invoices, copies of which will be provided upon request. Your order will be deemed an acceptance of those terms. ©Beltservice Corporation
FabClimb Pattern (Left) vs OEM Pattern
Bullhorn ½” Tall
Belt Width: 12” - 60”Cleat Width: 12” - 48”
(In 1” Increments)
6”
Sizes In Stock To Fit Equipment Manufactured By• Roadtec - RX Series RX 500, RX 700, RX 900
• Wirtgen - W Series W 1900, W 2000, W 2100, W 2200
• Caterpillar - PR & PM Series PM 200/565
• CMI - PR Series PR 500, PR 600, PR 800, PR 950
• Bomag - MP Series MP 2000
• Dynapac - PL Series PL 2000
Fablift 1” Tall
Cleat Width 15½” - 45½”
10”
Belt Width 18” - 48”
12”
