RM 1,199.00 RM 1,595
Transcript of RM 1,199.00 RM 1,595
9
SpecialPrice RM 1,199.00 Special
Price RM 1,595.00
SpecialPrice RM 154.00 Special
Price RM 703.70
SpecialPrice RM 1,540.00 Special
Price RM 3,080.00
160AMP ARC WELDER WITH ACCESSORY KIT• Manufactured in Europe to
exacting standards, this model
meets all relevant CE standards.
• Fitted with forced air cooling
system this welder has increased
duty cycle and performance.
• Features a single, vented, wrap
around shell fitted to a
heavy-duty chassis.
• Screw type, stepless welding
control allows fine
adjustment of current.
• Fitted with carry handle with
extension bar and set of
wheels for added mobility.
• Supplied with complete accessory
kit including electrode holder,
cables, earth clamp, chipping
hammer/wire brush and welding
mask.
• Model No.
160XTC
200AMP ARC WELDER WITH ACCESSORY KIT• Manufactured in Europe, this model
meets all relevant CE standards.
• Fitted with forced air cooling
system for increased duty
cycle and performance.
• Features a single, vented, wrap
around shell fitted to a
heavy-duty chassis.
• Screw type, stepless welding
control allows fine
adjustment of current.
• Fitted with carry handle with
extension bar and set of
wheels for added mobility.
• Supplied with complete accessory
kit including electrode holder,
cables, earth clamp, chipping
hammer/wire
brush and
welding
mask.
• Model No.
200XTC
CLEARVISION® SOLAR POWERED AUTOMATIC WELDING HELMET SHADE 9-13• High quality variable shade 9-13 lens
manufactured and tested to BSEN379.
• Fully automatic, switches from
light to dark on striking arc.
• Fitted with solar power
panel - no batteries required.
• Features sensitivity switch and delay
speed switch control for switching dark
to light, preventing arc eye when
welding at high power, whilst still
providing fast switching
for tack welding.
• Deluxe contoured helmet design
approved to BSEN175 gives full
neck protection and protects lens from
scratching when helmet is laid down.
• Comfortable headband and non-slip
quick-release ratchet mechanism.
• Suitable for MIG, TIG and arc welding.
• Model No. PWH599
8PC SOLDERING GUN/IRON KIT 230V
• Comprehensive kit containing
100Watt soldering gun,
30Watt soldering iron, iron holder,
excess solder extractor, scraper,
spare tips, solder wire and universal workpiece clamps.
• Fitted with BS approved plugs.
• Model No. SD300K
OXYACETYLENE GAS WELDING/CUTTING SET
• Complete set of regulators
and torches for
oxyacetylene gas welding.
• Single stage gas regulators
with 2 gauges to show bottle
pressure and working pressure.
• 4.5mtr Twin gas hose set with
check valves (to torch) and
EN730-compliant pressure
activated flash arrestors (to regulators).
• Welding torch with 3 lightweight nozzles.
• Cutting torch attachment with
3 ANMS cutting nozzles.
• Spark lighter.
• Supplied in carry-case.
• Model No. SGA1
140AMP INVERTER 230V
• Inverter power supply suitable for arc
or TIG welding applications using
scratch-start method.
• Features Arc-Force circuitry
making the unit suitable
for welding a wide
variety of rods.
• Also includes thermal
cut-out and mains
voltage LEDs.
• Fitted with Hot-Start
system to counter
electrode sticking
during scratch starting.
• Arc and TIG welding
accessory kits not
included.
• Model No. MW140
10
SpecialPrice RM 3,080.00
SpecialPrice RM 1,759.20
SpecialPrice RM 2,228.30
6 DRAWER TOPCHEST WITH BALL BEARING RUNNERS
• Heavy gauge steel with double wall
construction for extra strength and durability.
• Ball bearing drawer runners provide superior
performance and carry heavier loads.
• Each drawer fitted with catch to prevent unexpected opening,
when being transported around the workshop.
• Added security provided by side
mounted cylinder locks, supplied with two keys.
• Recessed handles permit units to be slotted
into work environments where space is tight.
• Rust and solvent resistant powder coat paint finish.
• Fitted with anti-shock protection on
all four corners to prevent accidental damage.
• Tough composite top.
• Overall Size (W x D x H): 690 x 465 x 535mm.
• Model No. AP2403
4 DRAWER ROLLCAB WITH BALL BEARING RUNNERS
• Heavy gauge steel with double wall construction for extra strength and durability
• Ball bearing drawer runners provide superior
performance and carry heavier loads.
• Each drawer fitted with catch to prevent unexpected opening
when being transported around the workshop.
• Added security provided by side mounted cylinder lock, supplied with two keys.
• Also features a lockable cupboard.
• Rubber grip side handles for comfort and ease when manoeuvring.
• Rust and solvent resistant powder coat paint finish.
• Fitted with anti-shock protection on all four corners to prevent accidental damage.
• Rollcabs feature two Ø125mm swivel castors with large
toe locks and two fixed wheels.
• Tough composite top for fitting and securing topchest
or can be used as a workstation.
• Unique design fitted with perforated side
panels for hanging tools and accessories.
• Model No. AP2405
4 DRAWER TOPCHEST WITH 142PCMODULAR TOOL KIT
• Topchest Model No.
AP2401
• Overall Dimensions
(W x D x H):
690 x 465 x 400mm
• 4 x Medium Drawers
Package Model No.
AP2401TTC08
11
SpecialPrice RM 12,800.00
SpecialPrice RM 2,345.60
SpecialPrice RM 3,166.50
14 DRAWER TOOLCHEST COMBINATION WITH 1231PC TOOL KIT
6 DRAWER ROLLCAB WITH BALLBEARING RUNNERS
• Heavy gauge steel with double wall construction for extra strength and durability
• Ball bearing drawer runners provide superior performance and carry heavier loads.
• Each drawer fitted with catch to prevent unexpected
opening when being transported around the workshop.
• Added security provided by side mounted cylinder lock, supplied with two keys.
• Rubber grip side handles for comfort and ease when manoeuvring.
• Rust and solvent resistant powder coat paint finish.
• Fitted with anti-shock protection on all four corners to prevent accidental damage.
• Rollcabs feature two Ø125mm swivel castors with large toe locks and two fixed wheels.
• Tough composite top for fitting and securing topchest or can be used as a workstation.
• Unique design fitted with perforated side panels for hanging tools and accessories.
• Overall Size (W x D x H): 766 x 465 x 958mm.
• Model No. AP2406
10 DRAWER ROLLCAB WITH BALL BEARING RUNNERS
• Heavy gauge steel with double wall construction for extra strength and durability
• Ball bearing drawer runners provide superior performance and carry heavier loads.
• Each drawer fitted with catch to prevent unexpected opening
when being transported around the workshop.
• Added security provided by side mounted cylinder lock, supplied with two keys.
• Rubber grip side handles for comfort and ease when manoeuvring.
• Rust and solvent resistant powder coat paint finish.
• Fitted with anti-shock protection on all four corners to prevent accidental damage.
• Rollcabs feature two Ø125mm swivel castors with large toe locks and two fixed wheels.
• Tough composite top for fitting and securing topchest or can be used as a workstation.
• Unique design fitted with perforated side panels for hanging tools and accessories.
• Overall Size (W x D x H): 766 x 465 x 958mm.
• Model No. AP2410
• Topchest Model No. AP2403
• Overall Dimensions
(W x D x H): 690 x 465 x 535mm
• 6 x Medium Drawers
• Rollcab Model No. AP2408
• Overall Dimensions
(W x D x H): 766 x 465 x 958mm
• 6 x Medium Drawers
• 2 x Large Drawers
• Package Model No. APTTC02
X2
Blank
Tray
12
SpecialPrice RM 197.00
SpecialPrice RM 182.80 Special
Price RM 177.70 SpecialPrice RM 430.00
SpecialPrice RM 533.70 Special
Price RM 1,980.00 SpecialPrice RM 44.00
SpecialPrice RM 152.50Special
Price RM 203.50SpecialPrice RM 165.00
WORKSHOP AIR FILTER/REGULATOR/LUBRICATOR
• Suitable for most workshop
air supply set-ups.
• Die-cast control
heads with clear
polycarbonate bowls.
• Regulator assembly
features locking control
knob for pre-setting air
pressure and large,
easy-to-read pressure gauge.
• Lubricator includes oil/air
mix control and sight glass.
• Model No. SA2001
PROFESSIONAL GOLD SERIES SUCTION FEED SPRAYGUN 1.8MM SET-UP• High quality, professional spray gun
ideal for automotive refinishing.
• Suitable for a wide
range of materials.
• Standard set-up 1.8mm.
• 1.5mm and 2.0mm
set-ups available.
• Supplied with cam
action suction pot.
• Nozzle and needle
in stainless
steel to allow use
with water based paints.
• Model No. S701
PROFESSIONAL GOLDSERIES GRAVITY FEEDSPRAY GUN 1.4MMSET-UP
• Suitable for applying
finishing coats.
• Adjustable spray width,
fluid flow and air volume.
• Standard set-up 1.4mm.
• 1.7 and 2.0mm
Set-ups available.
• Air pressure: 30-50 psi.
• Air consumption: 6-11cfm.
• Model No. S701G
100MM AIR ANGLE GRINDEREXTRA HEAVYDUTY
• Aluminium body and bevel gear housing
with steel disc-guard and side handle.
• Fitted with throttle safety device
to prevent accidental operation.
• Balanced and comfortable to operate..
• Model No. SA44
10MTR AUTO REWIND CONTROLAIR HOSE REEL ±10MMRUBBER HOSE• Controlled, slow rewind
which, unlike
traditional
retractable reels,
returns the air hose
at a safe speed.
• Hose can be extended
and positioned at any length.
• Auto layering mechanism
distributes air hose evenly
on hose drum preventing jamming.
• Fitted with high quality rubber hose.
• Model No. SA821
• List Price £99.95
1‰SQ DRIVE HEAVY-DUTY AIR IMPACT WRENCHLONG ANVIL
• Suitable for heavy commercial
tyre shop, fleet and workshop use.
• Features air/torque device, to control
power output, and reverse action.
• Long pattern anvil for deeply dished wheels.
• Working/Maximum Torque: 1200/1350lb.ft.
• Ultimate Torque: 1600lb.ft.
• Model No. SA291
4PC AIR BLOW GUN KIT
• Composite valve
body with
interchangeable
nozzles and safety tip.
• Includes 100 and 300mm
extensions, gun body,
blanking plug and
safety nozzle.
• Model No. SA914
GRAVITY FEED SPRAYGUN 1.4MM SET-UP
• Ideal for applying base coats.
• Features adjustable paint
flow and fan width controls.
• Supplied with spun aluminium
gravity feed pot and
comfortable composite
gun handle.
• Suitable for use with
water based paints.
• Alternative set-ups
available separately.
• Model No. SG4
DELUXE AIR OPERATED UNDERBODY COATING/WAX INJECTOR GUN
• Supplied with
canister and
wax injection
probe.
• Model No.
SG16
JUMBO TYRE INFLATOR WITH PUSH-ON CONNECTOR
• Composite
body and
dial type jumbo
gauge with
rubber protector.
• Calibrated in bar and psi.
• Fitted with 400mm rubber hose
and single push-on connector.
• Model No. SA9313
Model No Size Special Price
GSA20 3/8‰ Sq Drive RM 242.00
GSA21 1/2‰ Sq Drive RM 236.50
Model No Size Special Price
GSA20KIT 3/8‰ Sq Drive RM 308.00
GSA21KIT 1/2‰ Sq Drive RM 324.50
GENERATION SERIES AIR RATCHET WRENCHES
• Contoured and insulated handle
reduces chill and vibration.
• Heavy-duty twin pawl ratchet mechanism.
• 60lb.ft Torque output.
• Low noise exhaust adjusts 360°.
• Four speed, integral air regulator.
GENERATION SERIES AIR RATCHET WRENCH KIT
• Softgrip
handle for
comfort and
control.
• Adjustable
exhaust outlet for
control on
exhaust direction.
• Integral air regulator
with four-speed control.
• Supplied with impact sockets,
extension bars and driver bits.
13
SpecialPrice RM 381.20 Special
Price RM 396.10
SpecialPrice RM 228.70Special
Price RM 305.00SpecialPrice RM 140.80
SpecialPrice RM 241.40 Special
Price RM 228.70 SpecialPrice RM 571.80
SpecialPrice RM 844.40Special
Price RM 375.30
DIGITAL EXTERNAL MICROMETER 0-25MM/0-1‰
• 7-Button
digital
micrometer with satin chrome thimble and sleeve.
• Large, easy to read 9mm high LCD readout.
• Display switchable between Metric and Imperial units.
• Zero display in any position plus take
relative readings and tolerance readings.
• Auto power off switch.
• Model No. AK9635D
3PC MICROMETER SET - METRIC
• Set includes 3
external micrometers
ranging from 0-75mm.
• Supplied with extension
sets and adjusting wrench.
• Model No. AK9651M
6/12V BATTERY DROP TESTER
• American style drop tester.
• Load applied by internal switchgear - no sparking!
• Suitable for 6 and 12Volt batteries.
• Applies load across cells
and measures output on meter.
• Accurate indication of battery voltage,
faulty cell and short circuited cell.
• Model No. BT91/7
10AMP 6/12V ELECTRONIC BATTERY CHARGER 230V
• 10Amp, 6V/12Volt output.
• Compact electronic battery charger
with pressed steel casing and carry handle.
• Intelligent charge control and selectable 6V or 12V
output are perfect for long-term maintenance of
batteries on irregularly or seasonally-used vehicles.
• Suitable for lead acid or low maintenance batteries.
• Model No. AUTOCHARGE10
TRIPLE HEAD SUCTION GRIPPER
• Three Ø120mm rubber suction
grips prevent damage to surface.
• Designed for handling material such as glass, tiles,
plastic, sheet metal and other non-porous materials.
• Push-lock levers for easy operation.
• Holds up to 60kg in horizontal position.
• Model No. AK9893
3PC 1/2‰SQ DRIVEALLOY WHEEL DEEP IMPACT SOCKET SET
• Anodized
Chrome
Molybdenum
1/2”Sq drive
sockets.
• Suitable for use
with impact tools.
• Features nylon sleeve
and insert to prevent
damage to alloy wheels.
• Colour coded socket assists ease of selection.
• Model No. SX031D
17PC WHEEL MAINTENANCE KIT
• Removes
surface dirt
and corrosion
prepares
components for
re-assembly.
• Ideal for wheels, hubs and brake discs or drums.
• Suitable for use with power drill or wrench.
• Supplied with 1/2”Sq and 11mm hex drive adaptors.
• Model No. SX036
ELECTRONIC BATTERY TESTER 3FUNCTION 12V
• Steel case
with carry strap.
• 3 Control system electronic
analyser with large easy to read Volt meter and
4 LED read-out for battery and alternator condition.
• Model No. BT91/4
13 FUNCTION DIGITAL AUTOMOTIVE ANALYSER WITH INDUCTIVE COUPLER
• Four-digit 22mm, high contrast
LCD display and backlight.
• Features auto-ranging, data-hold
and auto-power-off functions.
• Includes inductive coupler
for fast reading of engine rpm.
• Supplied with probe, crocodile clip
and thermocouple leads for easy hook-up.
• Model No. TA201
15 FUNCTION AUTOMOTIVE DIGITAL MULTIMETER WITH BAR GRAPH/PC LINK• Integrated circuit.
• High visibility, backlit,
LCD display with bar graph.
• PC interface.
• Fifteen functions including pulse-width measurement
for fuel injectors, idle air control motors and electronic
transmission control systems.
• Auto-ranging and auto-power-off.
• Suitable for AC and DC circuits.
• Supplied with test leads (probe and clip), inductive
coupler with adjustable sensitivity, K type temperature
probe, PC Windows ME/XP software and USB
interface cable, operating instructions.
• Model No. TA203
Model No Size Special Price
PBS800 75-100mm RM 264.60
PBS801 75-175mm RM 495.50
QUICK ACTION GEARPULLERS 2 & 3 LEG
• Twin/triple leg yoke with three
drop-forged, Chrome
Vanadium steel legs.
• Legs may be used for
internal or external pulls.
• Spring-loaded mechanism
for fast leg changes.
• Removable thrust plate
prevents damage to shaft end.
• Minimum/Maximum leg
spread Ø75/100mm.
• Maximum reach 90mm.
14
SpecialPrice RM 93.90
SpecialPrice RM 120.70 Special
Price RM 724.20 SpecialPrice RM 177.90
SpecialPrice RM 127.10Special
Price RM 241.40
VALVE SPRING COMPRESSORS
• Quality construction with
sprung steel wraps and
ratchet action tension
mechanism.
• Supplied with steel key.
TYRE PRESSURE &DEPTH GAUGE
• Reads up to 99.5psi
(7bar) with ±1.5psi
accuracy.
• Simple push-button
operation with
backlit LCD display.
• Pressure read-out in psi,
bar, kPa or kg/cm≤.
• Auto-power-off after
approximately
85 seconds.
• Tread measurement
up to 22mm.
• Robust unit
with rubber grips.
• Batteries included.
• Model No. TSTPG7
4PC 3/8‰SQ DRIVE DIESEL GLOW PLUG SOCKET SET
• Popular glow plug sized 3/8”Sq drive Chrome Vanadium
steel sockets with universal joints
for simple replacement.
• Features rubber inserts for retention of plug in socket.
• Socket Sizes: 8, 10, 12mm.
• Set includes 75mm extension bar.
• Supplied in storage case.
• Model No. SX0402
PETROL ENGINE COMPRESSION TEST KIT
• Large, Ø56mm
gauge fitted with
protective cover
and 440mm hose.
• Scale reads from
0-25bar(0-350psi) and
conforms to BS1780-1985.
• Suitable for petrol engines
with 10, 12, 14 or 18mm spark plugs.
• Also includes 445mm hose and
quick release connector for air input.
• Supplied in plastic case
with preformed liner.
• Model No. VS200
ENGINE CLEANING KIT
• Air powered spray cleaner.
• 750ml Container.
• Standard and long aluminium nozzles.
• 1/4”BSP Air connection.
• Model No. VS018
7PC 1/2‰SQ DRIVE LOCKINGWHEEL NUT REMOVAL SET
• Forged Chrome Molybdenum steel 1/2”Sq
drive sockets for removal of wheel locking nuts.
• May also be used on fixings too damaged
or corroded for standard sockets.
• Suitable for use with impact wrenches.
• Contents: 17, 18.5, 20, 21.5, 23, 24.5, 26mm.
• Supplied in tough composite storage case.
• Model No. SX202
4-IN-1 CYLINDER HONE KIT
• Four cylinder-honing
tools in one set covering
18mm to 89mm cylinder bores.
• Suitable for honing and
de-glazing car brake and clutch
cylinders plus motorcycle,
outboard and lawnmower
engine cylinders.
• Adjustable honing pressure
and flexible drive shaft.
• Supplied in carry-case.
• Model No. VS029
Model No Description Special Price
VS154 Valve Spring Compressor - Multi-Valve RM 177.90
VS155 Piston Ring Compressor 75mm ±53-125mm Capacity RM 38.20
VS156 Piston Ring Compressor 75mm ±53-175mm Capacity RM 69.90
VS157 Piston Ring Compressor 100mm ±60-175mm Capacity RM 76.30
VS158 Piston Ring Compressor 150mm ±60-175mm Capacity RM 89.00
15
SpecialPrice RM 1588.20 Special
Price RM 762.30
SpecialPrice RM 1,143.50 Special
Price RM 635.30
SpecialPrice RM 140.80 Special
Price RM 279.60 SpecialPrice RM 222.40
ALUMINIUM EXTENSION COMBINATION LADDER 3X9 EN131
• Multi-use aluminium extension ladder,
manufactured to EN131 standards.
• Ideal for the tradesman, can be used as a
single, double or triple extension ladder.
• Extends to 5.94mtr when used as a triple.
• Doubles as a step ladder.
• Model No. ACL3
4-WAY ALUMINIUM FOLDING PLATFORM LADDER EN131
• EN131 Approved 4-way, 4-section aluminium ladder with mechanically swaged joints.
• 6 Robust auto latching locking hinges allow for multi positioning.
• Can be used as a platform, straight ladder, step ladder or offset ladder.
• Extra stability with two wide spars and 12 reinforced rungs.
• Optional metal platform available to use in platform/scaffold position,
order Model No. AFPL1/P.
• Model No. AFPL1
4 WAYALUMINIUM SCAFFOLD LADDER EN131
• EN131 Approved
4-way scaffold ladder.
• 2 x 6-Rung aluminium
ladder can be used
as extending ladder,
single ladder, step ladder
or complete
scaffolding unit.
• Supplied with security
bar and stability leg.
• Model No. ASCL1
7-TREAD ALUMINIUM STEP LADDER EN131
• EN131 Approved with 150kg capacity.
• Deep non-slip steps and wide platform
with integral lock for safe standing.
• Ribbed feet give full floor contact for extra stability.
• Fitted with foam-cushioned high safety rail.
• Model No. ASL7
24W/12V LEAD LAMP WITH7.25MTR CABLE & BATTERY CLIPS
• Heavy-duty lead lamp with
rubber grip and lens bumper-ring.
• Uses automotive type bayonet bulbs.
• Supplied with 7.25mtr cable and battery clips.
• On/off switch.
• Model No. ML25/12C
30 LED CORDLESSRECHARGEABLE INSPECTION LAMP
• Robust ABS housing featuring 30 super bright LEDs.
• 360° Swivel hanging hook and heavy-duty
magnet for hands-free use.
• Rocker switch for two light settings.
• Ideal for use in engine bays,
underbody inspections and low light work areas.
• Model No. LED3007
21+5 LED CORDLESS LITHIUM-IONRECHARGEABLE INSPECTION LAMP
• Featuring 26 super bright LEDs, 21 used as an
inspection lamp or 5 in the end for use
as a directional torch.
• Two 360° swivel hanging hooks for hands-free
applications allowing unit to be
used horizontally or vertically.
• Three rubber covered magnets for protection against
accidental damage, two magnets on the rear of the lamp
for horizontal use and one on the end for vertical use.
• Bottom quarter of the lamp rotates 180° allowing the unit
to be positioned for ease of use on any ferrous surface.
• Model No. LED2105
16
SpecialPrice RM 126.50
SpecialPrice RM 138.10
SpecialPrice RM 351.90
HOT AIR GUN 1600W 370°C/500°C
3PC 1/2‰SQ DRIVE ALLOY WHEEL IMPACT SOCKET SET
• Anodized Chrome
Molybdenum 1/2”Sq drive sockets.
• Suitable for use with impact tools.
• Features nylon sleeve and insert
to prevent damage to alloy wheels.
• Colour coded socket assists ease of selection.
• Comprises standard 17, 19 & 21mm sockets.
• Supplied in storage case.
• Model No. SX031
• One-man brake and clutch
bleeding the professional way.
• Requires no external power
source - simply fill and pump.
• Holds 2.5ltr of hydraulic fluid - flush
the entire system with one fill without
the risk of running the reservoir dry.
• Pressure range makes unit
suitable for use with ABS systems.
• Fitted with Ø42mm cap and
suitable for most European models.
• Model No. VS820
• Two step switch for
temperature and airflow control.
• Gun is designed to stand vertically,
allowing use as a safe
Bunsen burner alternative.
• Suitable for paint stripping, soft
soldering, removing sticky labels
and defrosting frozen pipes.
• Fitted BS approved 3 pin safety plug.
• Nozzles available
separately from HS107K.
• Temperature Range from 370 - 500°C.
• Model No. HS105
BRAKE & CLUTCH BLEEDING SYSTEM
Sealey GroupKempson Way, Suffolk Business Park,
Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
Web
To see Sealey’s impressive full range of products,
call Tools Depot Group @ 03-6156 2252 or
e-mail to [email protected]
Get your FREE 2009/10
Catalogue
YOUR LOCAL DEALER
*TRX-Star tools are suitable for driving
TORX® fasteners. Torx® is a registered
trademark of Camcar/Textron Inc.
TOOLS DEPOTG R O U P
9 & 11 Jalan BRP 1/4
Bukit Rahman Putra
47000 Sg. Buloh
Selangor Darul Ehsan, Malaysia
Tel: +603 6156 2252
Fax: +603 6156 2208
Email: [email protected]
www.toolsdepotgroup.com
2-Year parts and labour
warranty. Comprises 1-Year
unconditional parts and
labour warranty followed by a
further 1-Year parts and
labour, conditional on
registering your purchase with
us on a Guarantee Card.
2-Year parts and labour
warranty on our Premier
Viking range of Jacking and
Lifting equipment.
Lifetime replacement warranty
on all of our hand tool ranges.
No quibble guarantee also
covers individual items within
sets. Excludes TRX-Star* T40
bits, breaker bar knuckles, drill
bits, blades and engineering
taps and dies.
3-Year parts and labour warranty
on main power transformer of
Arc, MIG and Spot Welders plus
Plasma Cutters. Comprises 1-Year
unconditional parts and labour,
warranty followed by a further
2-Year parts and labour conditional
on registering your purchase
with us on a Guarantee Card.
5-Year* replacement parts
warranty conditional on
registering your purchase
with us on a Guarantee Card.
* 2-Year on Economy versions.
Hand Tools All-Steel Vices Premier Viking Premier Air ToolsWelding TransformersPeace of Mind Warranties
All Sealey products are covered by a minimum
1-year parts and labour guarantee.
Hand tools are covered by a no-quibble
lifetime guarantee against manufacturing
defects. Guarantees on our Premier Air Tools and
Welding Transformers are conditional on
completion and return of a simple registration
guarantee card.