Rim Gas Cylinder Tank Cart Trolley
description
Transcript of Rim Gas Cylinder Tank Cart Trolley
RIM GAS TRADINGCYLINDER TANK
2012
CARTSCATALOG
Tel No. (+632) 7033541 Fax No. (+632) 8626256 Tel No. (+632) 8224904 Email: [email protected] Cel no. +639082253131 Contact Person: Ms. Cristina
4
* Bolted on wheels and casters
* Solid rubber tired wheels
* Solid steel axles
* Reinforced toeplates / base plates
FAST ACTION CYLINDER PLACEMENT BANDS:
Developed and made standard on large
Manufacturers often use the terms “QUALITY” and “SAFETY” without describing how their products measure
and small cylinder carts.
Philippines, incorporating high quality and safety into its products for others to follow. up to the meaning of those words. RIM GAS TRADING has set high standards for the cylinder cart in the
CYLINDER WALL BRACKETS & BENCH MOUNTS
These double reinforced steel single and dual wall mount cylinder brackets are designed to be bolted to the wall and feature either nylon belting with spring loaded, quick release, nickel plated buckles or bright plated safety chain.
HOLDS 7” TO 9 1/2” DIAMETER CYLINDERS HOLDS 10” TO 16” DIAMETER CYLINDERS
NO. WB-100CWIDTH: 11” DEPTH: 6”
WEIGHT: 3 lbs.
NO. WB-200CWIDTH: 22” DEPTH: 7”
WEIGHT: 5 lbs.
NO. WB-200-15CWIDTH: 31” DEPTH: 12”
WEIGHT: 6 lbs.
BENCH MOUNTS (HOLDS 7” TO 9 1/2” DIA. CYLINDERS)
NO. BM-100CWIDTH: 11” DEPTH: 8”
WEIGHT: 4 lbs.
A handy bracket that attaches to any work bench or projection not wider than 2” by use of two non-marring swivel headed screws.
NO. WB-100WIDTH: 11” DEPTH: 6”
WEIGHT: 3 lbs.
NO. WB-200WIDTH: 22” DEPTH: 7”
WEIGHT: 5 lbs.
NO. WB-200-15WIDTH: 31” DEPTH: 12”
WEIGHT: 6 lbs.
NO. BM-100WIDTH: 11” DEPTH: 8”
WEIGHT: 4 lbs.
NO. WB-100-15WIDTH: 16” DEPTH: 12”
WEIGHT: 4 lbs.
NO. WB-100-15CWIDTH: 16” DEPTH: 12”
WEIGHT: 4 lbs.
PORTABLE CYLINDER CARTS & STANDS
These specially designed portable hand carried cylinder carts and stands are widely used by plumbers, refrigeration
MODEL NO. PH-9 is designed for hand carrying applications. Features include an ergonomically designed carry handle, double hose reel hooks, bottom pan and a continuous ring design for positive cylinder containment.
MODEL NO. HC-100 is designed for hand carrying applications. Features include an ergonomically designed carry handle, double hose reel hooks, bottom pan and zinc plated safety chain.
MODEL NO. HC-100W comes equipped with a telescopic handle that extends up to 41”, convenient tool tray and has easy rolling 6” wheels.
MODEL NO. HC-NITRO is a hand carried unit designed for the refrigeration and air conditioning industry or when it is necessary to safely carry and transport a 40 to 50 cu. ft. high pressure nitrogen, oxygen, helium etc. cylinder.
MODEL NO. HC-NITRO-W comes equipped with a telescopic handle that extends up to 41” and has easy rolling 6” wheels.
NO. PH-9HEIGHT: 25” WIDTH: 11” (O.D.)
DEPTH: 6” WEIGHT: 7 lbs.
NO. HC-100HEIGHT: 25” WIDTH: 14” (O.D.)
DEPTH: 7” WEIGHT: 9 lbs.
NO. HC-100WHEIGHT: 25”/ 41” WIDTH: 17” (O.D.)
DEPTH: 10” WEIGHT: 15 lbs.
NO. HC-NITROHEIGHT: 30” WIDTH: 7 1/2” (O.D.)
DEPTH: 9” WEIGHT: 4 lbs.
NO. HC-NITRO-WHEIGHT: 30”/ 41” WIDTH: 12” (O.D.)
DEPTH: 11” WEIGHT: 7 lbs.
CYLINDER SIZE:MC, NO.10 (ACET.) R, NO.20 (OXY.)
13 1/2” COMBINED CYL.DIAMETER
CYLINDER SIZE:40 TO 50 CU. FT. (HIGH PRESSURE)
Popular ERGONOMICALLY DESIGNED CARRY HANDLES provide for ease of handling, with less wrist, hand and arm fatigue.
WHEEL DIA: 6” SEMI. PNEU. (PB)
WHEEL DIA: 6” SEMI. PNEU. (PB)
HEIGHT13”
Holds up to a 7 1/4” dia. cylinder.
40 CU.FT. ACETYLENE & 50 TO 80 CU.FT. OXYGENCYLINDER CARTS
These very popular models are designed to handle a 50 to 80 cubic ft. oxygen and 40 cubic ft. acetylene or (1 cyl-
where casual welding requirements may apply. Features include a reinforced frame, welding rod holders, zinc plated safety chain and large 7” solid rubber wheels.
SINGLE HANDLE DUAL HANDLE
NO. 38HEIGHT: 41” WIDTH: 19” (O.D.)
WEIGHT: 17 lbs. COMBINED CYL. DIA: 15”
NO. 38BEQUIPPED WITH A HANDY TOOL TRAY
NO. 38-DHHEIGHT: 41” WIDTH: 19” (O.D.)
WEIGHT: 20 lbs. COMBINED CYL. DIA: 15”
NO. 38B-DHEQUIPPED WITH AHANDY TOOL TRAY
HANDY TOOL TRAY
Recommended for automotive and repair shops, these step-type tandem carts are built to move (1) 80 to 150 cu.ft. oxygen and (1) 75 cu. ft. acetylene or (2) cylinders no greater than 8” ea. in dia.) in and out of nar-row places. The cylinders load separately, from front and rear, and are secured with placement bands for safe positive cylinder containment.
DUAL HANDLE
NO. 43HEIGHT: 42” WIDTH: 16” (O.D.)
WEIGHT: 34 lbs. COMBINED CYL. DIA: 17”
CONTINUOUS HANDLE
NO. 45HEIGHT: 42” WIDTH: 16” (O.D.)
WEIGHT: 34 lbs. COMBINED CYL. DIA: 17”
WHEEL DIA: 7” x 1.50” SOLID RUBBER (PB) WHEEL DIA: 7” x 1.50” SOLID RUBBER (PB)
WHEEL DIA: 10” x 1.75” SOLID RUBBER (BB) WHEEL DIA: 10” x 1.75” SOLID RUBBER (BB)
75 CU.FT. ACETYLENE & 80 TO 150 CU.FT. OXYGENTANDEM STYLE CYLINDER CARTS
inder up to 8” in dia.) and (1 cylinder up to 7” in dia.) These carts are ideal for use in repair shops, garages or
These very popular models are designed to handle an 80 to 150 cubic ft. oxygen and 75 cu.ft. acetylene or (1 cyl. up to 8 1/2” in dia.) and (1 cyl. up to 8” in dia.).
shops, garages, or where casual welding requirements may apply. Features include a reinforced frame, handy tool tray, welding rod holders and zinc plated safety chain.
NO. 39HEIGHT: 44” WIDTH: 21” (O.D.)
WEIGHT: 22 lbs.COMBINED CYL. DIA: 16 1/2”
LARGE 7” SOLIDRUBBER WHEELS
NO. 39VHEIGHT: 44” WIDTH: 21” (O.D.)
WEIGHT: 28 lbs.COMBINED CYL. DIA: 16 1/2”
LARGE 10” SOLIDRUBBER WHEELS
NO. 39CHHEIGHT: 44” WIDTH: 21” (O.D.)
WEIGHT: 23 lbs.COMBINED CYL. DIA: 16 1/2”
LARGE 7” SOLIDRUBBER WHEELS
NO. 39CH-10HEIGHT: 44” WIDTH: 21” (O.D.)
WEIGHT: 30 lbs.COMBINED CYL. DIA: 16 1/2”
LARGE 10” SOLIDRUBBER WHEELS
These unique dual purpose models are designed to accommodate various size cylinders up 8 1/4” ea. in dia. (no
shops, garages or where casual welding requirements may apply. Features include a wrap around handle, reinforced toeplate, handy tool tray and (2) sets of zinc plated safety chain.
DESIGNED TO ACCOMMODATE SETS OF:
50 TO 80 CUBIC FT. OXYGEN (&) 40 CU. FT. ACETYLENE
OR
80 TO 150 CUBIC FT. OXYGEN (&) 75 CU. FT. ACETYLENE
“T” HANDLE DUAL HANDLE
75 CU.FT. ACETYLENE & 80 TO 150 CU.FT. OXYGENCYLINDER CARTS
These carts are ideal for use in repair
greater than 16 1/2” in combined dia.) to grow with your welding gas needs. These carts are ideal for use in repair
80 TO 150 CU.FT. OXYGEN & 75 CU.FT. (NO.3) ACETYLENE CYLINDER CARTS
These carts are designed for (2) high or low pressure cylinders side-by-side. Features include our “User Friendly” heavy gauge wrap around handle, high side rail design providing more positive cylinder contain-ment, large tool tray and our exclusive fast action cylinder placement band with large tightening knob.
HIGH RAIL FRAME DESIGN
NO. 41-10HEIGHT: 42” WIDTH: 23” (O.D.)
WEIGHT: 34 lbs.
“USER FRIENDLY”ERGONOMIC HANDLE
LARGE DEEPTOOL TRAY
SOLIDRUBBER TIRES
HEAVY-DUTYLOCKNUTS
SOLIDAXLE
LARGE TURNING
KNOB
EXCLUSIVE FAST ACTION CYLINDER PLACEMENT BAND
WHEEL TYPE:10” x 1.75” SOLID RUBBER (BB)
WHEEL TYPE:14” x 1.75” SOLID RUBBER (BB)
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
NO. 41-14HEIGHT: 42” WIDTH: 23” (O.D.)
WEIGHT: 44 lbs.
NO. 41-16HEIGHT: 42” WIDTH: 27” (O.D.)
WEIGHT: 49 lbs.
WHEEL TYPE:14” x 2.00” STEEL (BB)
NO. 41-14SHEIGHT: 42” WIDTH: 26” (O.D.)
WEIGHT: 35 lbs.
NO. 41-18HEIGHT: 42” WIDTH: 26” (O.D.)
WEIGHT: 48 lbs.
WHEEL TYPE:18” x 2.00” STEEL (BB)
BB = BALL BEARING
NEWLY DESIGNED BALL BEARING (BB)STEEL WHEELS
ergonomic handle design.
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 41-16-LNR
RIM Cart’s “User Friendly”
RIM Cart's four wheel cart design features (2) strategically
LOAD - N - ROLL SERIES CARTS.
For the user who prefers the look and construction of a low rail cylinder cart, these carts are designed for (2) high or low pressure cylinders side-by-side. Features include our “User Friendly” heavy gauge wrap around handle, large tool tray and zinc plated safety chain.
LOW RAIL FRAME DESIGN
NO. 4-10HEIGHT: 42” WIDTH: 26” (O.D.)
WEIGHT: 34 lbs.
“USER FRIENDLY”ERGONOMIC HANDLE
LARGE DEEPTOOL TRAY
SOLIDRUBBER TIRES
HEAVY-DUTYLOCKNUTS
SOLID AXLE
ZINC PLATEDSAFETY CHAIN
WHEEL TYPE:10” x 1.75” SOLID RUBBER (BB)
80 TO 150 CU.FT. OXYGEN & 75 CU.FT. (NO.3) ACETYLENE CYLINDER CARTS
WHEEL TYPE:14” x 1.75” SOLID RUBBER (BB)
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
NO. 4-14HEIGHT: 42” WIDTH: 26” (O.D.)
WEIGHT: 44 lbs.
NO. 4-16HEIGHT: 42” WIDTH: 30” (O.D.)
WEIGHT: 49 lbs.
WHEEL TYPE:14” x 2.00” STEEL (BB)
NO. 4-14SHEIGHT: 42” WIDTH: 29” (O.D.)
WEIGHT: 35 lbs.
NO. 4-18HEIGHT: 42” WIDTH: 29” (O.D.)
WEIGHT: 48 lbs.
WHEEL TYPE:18” x 2.00” STEEL (BB)
BB = BALL BEARING
NEWLY DESIGNED BALL BEARING (BB)STEEL WHEELS
ergonomic handle design.
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 4-16-LNR
RIM Cart's "User Friendly”
RIM Cart's four wheel cart design features (2) strategically
LOAD - N - ROLL SERIES CARTS.
244 TO 330 CU.FT. OXYGEN & 145 CU.FT. (NO.4) ACETYLENE CYLINDER CARTS
HIGH RAIL FRAME DESIGN
LARGE DEEPTOOL TRAY
LARGE TURNING
KNOB
WHEEL TYPE:14” x 1.75” SOLID RUBBER (BB)
BB = BALL BEARING
ergonomic handle design.
WHEEL TYPE:10” x 1.75” SOLID RUBBER (BB)
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
NO. 85-10HEIGHT: 46” WIDTH: 25” (O.D.)
WEIGHT: 38 lbs.
NO. 85-16HEIGHT: 46” WIDTH: 29” (O.D.)
WEIGHT: 49 lbs.
NO. 85-16S (not shown)HEIGHT: 46” WIDTH: 29” (O.D.)
WEIGHT: 49 lbs.
WHEEL TYPE:24” x 2.00” STEEL (BB)
NEWLY DESIGNED BALL BEARING (BB) STEEL WHEELS
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
NO. 81HEIGHT: 46” WIDTH: 28” (O.D.)
WEIGHT: 52 lbs.
NO. 85-24HEIGHT: 46” WIDTH: 27” (O.D.)
WEIGHT: 56 lbs.
These carts are designed for (2) high or low pressure cylinders side-by-side of 9 1/4” ea. in diameter or any combination therof. Features include our new “User Friendly” heavy gauge wrap around handle, high side rail design providing more positive cylinder contain-ment, large tool tray and our exclusive fast action cylinder placement band with large tightening knob.
NO. 85-14HEIGHT: 46” WIDTH: 25” (O.D.)
WEIGHT: 45 lbs.
SOLID AXLE
NO. 85-18 (NOT SHOWN)WHEEL TYPE: 18” x 2.00” STEEL (BB)
“USER FRIENDLY”ERGONOMIC HANDLE
EXCLUSIVE FAST ACTION CYLINDER PLACEMENT BAND
HEAVY-DUTYLOCKNUTS
SOLIDRUBBER TIRES
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 85-16-LNR
RIM Cart's “User Friendly”
LOAD - N - ROLL SERIES CARTS.RIM Cart's four wheel cart design features (2) strategically
244 TO 330 CU.FT. OXYGEN & 145 CU.FT. (NO.4) ACETYLENE CYLINDER CARTS
LOW RAIL FRAME DESIGN
“USER FRIENDLY”ERGONOMIC HANDLE
LARGE DEEPTOOL TRAY
SOLIDRUBBER TIRES
HEAVY-DUTYLOCKNUTS
SOLID AXLE
ZINC PLATEDSAFETY CHAIN
BB = BALL BEARING
ergonomic handle design.
WHEEL TYPE:10” x 1.75” SOLID RUBBER (BB)
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
NO. 8-10HEIGHT: 46” WIDTH: 28” (O.D.)
WEIGHT: 38 lbs.
NO. 8-16HEIGHT: 46” WIDTH: 32” (O.D.)
WEIGHT: 51 lbs.
WHEEL TYPE:24” x 2.00” STEEL (BB)
NO. 8-24HEIGHT: 46” WIDTH: 30” (O.D.)
WEIGHT: 57 lbs.
NO. 8-16SHEIGHT: 46” WIDTH: 32” (O.D.)
WEIGHT: 81 lbs.
WHEEL TYPE:16” x 4.00” SOLID RUBBER (BB)
NO. 8-18 (NOT SHOWN)WHEEL TYPE: 18” x 2.00” STEEL (BB)
NEWLY DESIGNED BALL BEARING (BB) STEEL WHEELS
For the user who prefers the look and construction of a low rail cylinder cart, these carts are designed for (2) high or low pressure cylinders side-by-side of 9 1/4” ea. in diameter or any combination thereof. Features include our new “User Friendly” heavy gauge wrap around handle, large tool tray and zinc plated safety chain.
NO. 8-14HEIGHT: 46” WIDTH: 28” (O.D.)
WEIGHT: 48 lbs.
WHEEL TYPE:14” x 1.75” SOLID RUBBER (BB)
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 8-16-LNR
RIM Cart's “User Friendly”
LOAD - N - ROLL SERIES CARTS.RIM Cart's four wheel cart design features (2) strategically
244 TO 330 CU.FT. OXYGEN & 210 TO 420 CU.FT. (NO.4.5 - NO.5 - WK) ACETYLENE CYLINDER CARTS
HIGH RAIL FRAME DESIGN
LARGE DEEPTOOL TRAY
LARGE TURNING
KNOB
WHEEL TYPE:14” x 1.75” SOLID RUBBER (BB)
BB = BALL BEARING
ergonomic handle design.
SOLID AXLE
“USER FRIENDLY”ERGONOMIC HANDLE
EXCLUSIVE FAST ACTION CYLINDER PLACEMENT BAND
HEAVY-DUTYLOCKNUTS
SOLIDRUBBER TIRES
These carts are designed for (1) large oxygen and (1) no. 4.5, 5 or WK acetylene cylinder side-by-side. Features include our new “User Friendly” heavy gauge wrap around handle, high side rail design providing more positive cylinder containment, large tool tray and our exclusive fast action cylinder place-ment band with large tightening knob.
NO. 24-14HEIGHT: 47” WIDTH: 29” (O.D.)
WEIGHT: 53 lbs.
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:16” x 4.00” SOLID RUBBER (BB)
NO. 24-16HEIGHT: 47” WIDTH: 33” (O.D.)
WEIGHT: 57 lbs.
NO. 24-16SHEIGHT: 47” WIDTH: 33” (O.D.)
WEIGHT: 87 lbs.
WHEEL TYPE:24” x 2.00” STEEL (BB)
NO. 24-24HEIGHT: 47” WIDTH: 32” (O.D.)
WEIGHT: 64 lbs.
NEWLY DESIGNED BALL BEARING (BB) STEEL WHEELS
NO. 24-18 (NOT SHOWN)WHEEL TYPE: 18” x 2.00” STEEL (BB)
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 24-16-LNR
RIM Cart's “User Friendly”
LOAD - N - ROLL SERIES CARTS.RIM Cart's four wheel cart design features (2) strategically
244 TO 330 CU.FT. OXYGEN & 210 TO 420 CU.FT. (NO.4.5 - NO.5 - WK) ACET. OR 100 lb. PROPANE CYL. CARTS
LOW RAIL FRAME DESIGN
“USER FRIENDLY”ERGONOMIC HANDLE
LARGE DEEPTOOL TRAY
SOLIDRUBBER TIRES
HEAVY-DUTYLOCKNUTS
SOLID AXLE
ZINC PLATEDSAFETY CHAIN
BB = BALL BEARING
ergonomic handle design.
WHEEL TYPE:14” x 1.75” SOLID RUBBER (BB)
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:16” x 4.00” SOLID RUBBER (BB)
For the user who prefers the look and construction of a low rail cylinder cart, these carts are designed for (1) large oxygen and (1) 4.5, 5, WK, or 100 lb. propane cylinder side-by-side. Features include our new “User Friendly” heavy gauge wrap around handle, large tool tray and zinc plated safety chain.
NO. 2-16HEIGHT: 47” WIDTH: 36” (O.D.)
WEIGHT: 56 lbs.
NO. 2-16SHEIGHT: 47” WIDTH: 36” (O.D.)
WEIGHT: 86 lbs.
WHEEL TYPE:24” x 2.00” STEEL (BB)
NEWLY DESIGNED BALL BEARING (BB) STEEL WHEELS
NO. 2-24HEIGHT: 47” WIDTH: 35” (O.D.)
WEIGHT: 63 lbs.
NO. 2-14HEIGHT: 47” WIDTH: 32” (O.D.)
WEIGHT: 53 lbs.
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 2-16-LNR
RIM Cart's “User Friendly”
LOAD - N - ROLL SERIES CARTS.RIM Cart's four wheel cart design features (2) strategically
generated from (1) acetylene or other welding fuel-gas cylinder placed
partition performs this function. The purpose of the center partition
grade fuel-gas cylinder from heating the adjacent oxygen cylinder contents to such an extent that it causes expansion of the oxygen
prescribed safe pressure level. Should the oxygen cylinder contents
could activate the safety control burst disc, which would then allow
BUILT-IN FIREWALL & LIFTING EYE SERIES
244 TO 330 CU.FT. OXYGEN & 210 TO 420 CU.FT. (NO.4.5 - NO.5 - WK) ACET. OR 100 lb. PROPANE CYL. CARTS
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:24” x 6.00” AUTO / RIM (RB)
NO. 94LFW-16HEIGHT: 65” WIDTH: 37” (O.D.)
WEIGHT: 155 lbs.
NO. 94-15LFW-24HEIGHT: 65” WIDTH: 46” (O.D.)
WEIGHT: 208 lbs. 8 - 1 LIFTING SAFETY RATIO 8 - 1 LIFTING SAFETY RATIO
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 94LFW-16-LNR
NO. 94LFW-16SHEIGHT: 65” WIDTH: 37” (O.D.)
WEIGHT: 178 lbs.
8 - 1 LIFTING SAFETY RATIO
BUILT IN LIFTING EYE
LARGE SLOTTEDLOCKING TOOL BO
TRIPLE BAFFLEFIREWALL PARTITION
HEAVY-DUTYLOCKNUTS
SOLID AXLE
SOLIDRUBBER
TIRES
WHEEL TYPE:16” x 4.00” SOLID RUBBER (BB)
THE PURPOSE OF A FIREWALL CART:The RIM CART Firewall Series is designed to restrict a flame
RIM CART’S EXCLUSIVE
LOAD - N - ROLL SERIES CARTS.RIM Cart's four wheel cart design features (2) strategically
cylinder contents, which increases the PSI level higher than the
be expanded beyond the safe level, the expanded contents
REMINDER 1: Oxygen cylinders shall not be be stored near highly combustible material, especially oil and grease; or near reserve stocks of carbide and acetylene or other fuel-gas cylinders, or near any other substance likely to cause or
separated from fuel-gas cylinders or combustible materials (especially oil or grease) a minimum distance of 20 feet (6.1m) or by a noncombustible barrier at least 5 feet (1.5m) high having
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:16” x 4.00” SOLID RUBBER (BB)
WHEEL TYPE:14” x 1.75” SOLID RUBBER (BB)
WHEEL TYPE:24” x 6.00” AUTO / RIM (RB)
protection caps, when provided for, shall be put in place before cylinders are moved.
separated from fuel-gas cylinders or combustible materials (especially oil or grease) by a minimum distance of 20 ft. (6 m) or by a barrier of noncombustible material at least 5 ft. (1.5 m) high having a fire resistance rating of at least 1/2 hour. The barrier shall interrupt all lines of sight between oxygen and fuel-gas cylinders within 20 ft. of each other.
244 TO 330 CU.FT. OXYGEN & 145 CU.FT. (NO.4) ACETYLENE CYLINDER CARTS
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 84LFW-16-LNR
NO. 84LFW-24HEIGHT: 66” WIDTH: 32” (O.D.)
WEIGHT: 151 lbs.
NO. 84LFW-18HEIGHT: 66” WIDTH: 32” (O.D.)
WEIGHT: 145 lbs. 8 - 1 LIFTING SAFETY RATIO8 - 1 LIFTING SAFETY RATIO
WHEEL TYPE:24” x 2.00” STEEL (BB)
WHEEL TYPE:18” x 2.00” STEEL (BB)
HOLDS A LARGE OXYGEN AND MEDIUMACETYLENE CYLINDER
NO. 94LFW-24HEIGHT: 66” WIDTH: 35” (O.D.)
WEIGHT: 166 lbs.
NO. 94LFW-18HEIGHT: 66” WIDTH: 35” (O.D.)
WEIGHT: 160 lbs. 8 - 1 LIFTING SAFETY RATIO8 - 1 LIFTING SAFETY RATIO
WHEEL TYPE:24” x 2.00” STEEL (BB)
WHEEL TYPE:18” x 2.00” STEEL (BB)
HOLDS A LARGE OXYGEN, #5, WK ACETYLENEOR 100 lb. PROPANE CYLINDER
NO. 84LFW-16HEIGHT: 66” WIDTH: 34” (O.D.)
WEIGHT: 140 lbs. 8 - 1 LIFTING SAFETY RATIO
NO. 84LFW-16SHEIGHT: 66” WIDTH: 34” (O.D.)
WEIGHT: 163 lbs. 8 - 1 LIFTING SAFETY RATIO
NO. 84LFW-14HEIGHT: 66” WIDTH: 30” (O.D.)
WEIGHT: 140 lbs.
NO. 84-15LFW-24HEIGHT: 66” WIDTH: 42” (O.D.)
WEIGHT: 193 lbs. 8 - 1 LIFTING SAFETY RATIO8 - 1 LIFTING SAFETY RATIO
REMINDER 2: Oxygen cylinders in storage shall be
on a special carts, regulators shall be removed and valve-
REMINDER 4: Oxygen cyl inders in storage shall be
ALL RIM Cart's FIREWALL CYLINDER CARTS COMPLY WITH:
LOAD - N - ROLL SERIES CARTS.RIM Cart's four wheel cart design features (2) strategically
REMINDER 3: Unless cylinders are secured
resistant wall is required for proper cylinder storage.
Features include a heavy-duty steel frame construc-tion, Triple Baffle Firewall Partition, heavy gauge reinforced toeplate, large slotted locking tool box (for locking away torches & regulators when not in use) and zinc plated safety chain.
NO. 94FW-16SHEIGHT: 62” WIDTH: 37” (O.D.)
WEIGHT: 140 lbs.
LARGE SLOTTEDLOCKING TOOL BOX
SOLIDRUBBER TIRES
HEAVY-DUTYLOCKNUTS
WHEEL TYPE:16” x 4.00” SOLID RUBBER (BB)
TRIPLE BAFFLEFIREWALL PARTITION
ZINC PLATEDSAFETY CHAIN
SOLID AXLE
244 TO 330 CU.FT. OXYGEN & 210 TO 420 CU.FT. (NO.4.5 - NO.5 - WK) ACET. OR 100 lb. PROPANE CYL. CARTS
BUILT-IN FIREWALL SERIES
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:14” x 1.75” SOLID RUBBER (BB)
NO. 94FW-16HEIGHT: 62” WIDTH: 37” (O.D.)
WEIGHT: 118 lbs.
NO. 94FW-14HEIGHT: 62” WIDTH: 33” (O.D.)
WEIGHT: 117 lbs.
WHEEL TYPE:24” x 2.00” STEEL (BB)
NO. 94FW-24HEIGHT: 62” WIDTH: 33” (O.D.)
WEIGHT: 129 lbs.
NO. 94-15FW-24HEIGHT: 62” WIDTH: 46” (O.D.)
WEIGHT: 173 lbs.
WHEEL TYPE:24” x 6.00” PNEUMATIC (BB)
BB = BALL BEARING RB = TAPERED ROLLER BEARING
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 94FW-16-LNR
LOAD - N - ROLL SERIES CARTS.RIM Cart's four wheel cart design features (2) strategically
RIM CART’S EXCLUSIVE
19
resistant wall is required for proper cylinder storage.
Features include a heavy-duty steel frame construction,
toeplate, large slotted locking tool box (for locking away torches & regulators when not in use) and zinc plated safety chain.
NO. 84FW-16SHEIGHT: 62” WIDTH: 34” (O.D.)
WEIGHT: 138 lbs.
LARGE SLOTTEDLOCKING TOOL BOX
SOLIDRUBBER TIRES
HEAVY-DUTYLOCKNUTS
WHEEL TYPE:16” x 4.00” SOLID RUBBER (BB)
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:14” x 1.75” SOLID RUBBER (BB)
NO. 84FW-16HEIGHT: 62” WIDTH: 34” (O.D.)
WEIGHT: 116 lbs.
NO. 84FW-14HEIGHT: 62” WIDTH: 30” (O.D.)
WEIGHT: 115 lbs.
WHEEL TYPE:24” x 2.00” STEEL (BB)
NO. 84FW-24HEIGHT: 62” WIDTH: 32” (O.D.)
WEIGHT: 127 lbs.
NO. 84-15FW-24HEIGHT: 62” WIDTH: 42” (O.D.)
WEIGHT: 163 lbs.
WHEEL TYPE:24” x 6.00” PNEUMATIC (BB)
BB = BALL BEARING RB = TAPERED ROLLER BEARING
TRIPLE BAFFLEFIREWALL PARTITION
ZINC PLATEDSAFETY CHAIN
SOLID AXLE
244 TO 330 CU.FT. OXYGEN & 145 CU.FT. (NO.4) ACETYLENE CYLINDER CARTS
BUILT-IN FIREWALL SERIES
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 84FW-16-LNR
(See pages 16 & 17 for important information on how
LOAD - N - ROLL SERIES CARTS.RIM Cart's four wheel cart design features (2) strategically
LARGE SLOTTEDTOOL BOX
NO. 94L-16SHEIGHT: 64” WIDTH: 37” (O.D.)
WEIGHT: 106 lbs.
NO. 94L-24HEIGHT: 64” WIDTH: 37” (O.D.)
WEIGHT: 90 lbs.
These models are engineered and designed for the transporting and lifting of cylinders. Features include a 5 to 1 lifting safety ratio, heavy-duty steel frame construction, large slotted locking tool box, our exclusive fast action cylinder placement bands and a heavy gauge reinforced toeplate.
BB = BALL BEARING RB = TAPERED ROLLER BEARING
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:24” x 6.00” AUTO / RIM (RB)
WHEEL TYPE:24” x 2.00” STEEL (BB)
NO. 94-15LHEIGHT: 64” WIDTH: 46” (O.D.)
WEIGHT: 148 lbs.
NO. 94L-16HEIGHT: 64” WIDTH: 38” (O.D.)
WEIGHT: 79 lbs.
NO. 94L-18 (NOT SHOWN)WHEEL: 18” x 2.00” STEEL (BB)
SOLIDRUBBER
TIRES
HEAVY-DUTYLOCKNUTS
SOLIDAXLE
WHEEL TYPE:16” x 4.00” SOLID RUBBER (BB)
5 - 1 LIFTING SAFETY RATIO
5 - 1 LIFTING SAFETY RATIO 5 - 1 LIFTING SAFETY RATIO 5 - 1 LIFTING SAFETY RATIO
LIFTING EYE SERIES
244 TO 330 CU.FT. OXYGEN & 210 TO 420 CU.FT. (NO.4.5 - NO.5 - WK) ACET. OR 100 lb. PROPANE CYL. CARTS
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 94L-16-LNR
CANTILEVERED LIFTING EYE
(TO HELP KEEP LOAD BALANCED WHEN LIFTED)
LOAD - N - ROLL SERIES CARTS.RIM Cart's four wheel cart design features (2) strategically
LARGE SLOTTEDTOOL BOX
NO. 84L-16SHEIGHT: 64” WIDTH: 34” (O.D.)
WEIGHT: 102 lbs.
NO. 84L-24HEIGHT: 64” WIDTH: 32” (O.D.)
WEIGHT: 90 lbs.
These models are engineered and designed for the transporting andlifting of (2) high or low pressure cylinders side-by-side of up to 10” ea. in dia. or any combination thereof (excluding 6000 PSI cylinders).Features include a 5 to 1 lifting safety ratio, heavy-duty steel frame construction, large slotted locking tool box, our exclusive fast action cylinder placement bands and a heavy gauge reinforced toeplate.
BB = BALL BEARING RB = TAPERED ROLLER BEARING
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:24” x 6.00” AUTO / RIM (RB)
WHEEL TYPE:24” x 2.00” STEEL (BB)
NO. 84L-15HEIGHT: 64” WIDTH: 42” (O.D.)
WEIGHT: 148 lbs.
NO. 84L-16HEIGHT: 64” WIDTH: 34” (O.D.)
WEIGHT: 79 lbs.
NO. 84L-14 (NOT SHOWN)WHEEL: 14” x 1.75” SOLID RUBBER (BB)
5 - 1 LIFTING SAFETY RATIO
NO. 84L-18 (NOT SHOWN)WHEEL: 18” x 2.00” STEEL (BB)
5 - 1 LIFTING SAFETY RATIO
SOLIDRUBBER
TIRES
HEAVY-DUTYLOCKNUTS
SOLIDAXLE
WHEEL TYPE:16” x 4.00” SOLID RUBBER (BB)
5 - 1 LIFTING SAFETY RATIO 5 - 1 LIFTING SAFETY RATIO 5 - 1 LIFTING SAFETY RATIO
5 - 1 LIFTING SAFETY RATIO
244 TO 330 CU.FT. OXYGEN & 145 CU.FT. (NO.4) ACETYLENE OR (2) LARGE OXYGEN CYLINDER CARTS
LIFTING EYE SERIES
CANTILEVERED LIFTING EYE
(TO HELP KEEP LOAD BALANCED WHEN LIFTED)
placed heavy-duty locking front casters that allows the operator two ways to move the cylinder load: Simply push the cart upright using all four wheels or tilt the cart back and move it the traditional way over rough and cluttered surfaces.
Add LNR to end of cart number above for this patented feature.
Example: 84L-16-LNR
LOAD - N - ROLL SERIES CARTS.RIM Cart's four wheel cart design features (2) strategically
NO. 88PN-RHEIGHT: 50” WIDTH: 24” (O.D.)
WEIGHT: 58 lbs.
different types of liquid cylinders. These models are designed to handle large liquid cylinders 20 1/2” in dia.. A heavygauge toeplate provides positive placement of the cylinder, precluding possible cylinder damage from dropping. Equipped with a stationary rear assembly, double reinforced all-welded steel frame, (2) sets of zinc plated safety chain and (2) large locking swivel rear casters that are removable for repair, maintenance or replacement.
BB = BALL BEARING
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
4” x 1.25” SWIVEL CASTERS W/LOCKS
NO. 86-4LHEIGHT: 55” WIDTH: 21” (O.D.)
WEIGHT: 70 lbs.
NO. 87-4LHEIGHT: 55” WIDTH: 30” (O.D.)
WEIGHT: 78 lbs.
NO. 88PNHEIGHT: 50” WIDTH: 24” (O.D.)
WEIGHT: 38 lbs.
NO. 88HEIGHT: 50” WIDTH: 20” (O.D.)
WEIGHT: 34 lbs.
STATIONARY REAR ASSEMBLY WITH HEAVY-DUTY 4” CASTERS W/ LOCKS
FOR TALLER CYLINDERS
WHEEL TYPE:10” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
WHEEL TYPE:10” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
NO. 88-RHEIGHT: 50” WIDTH: 20” (O.D.)
WEIGHT: 54 lbs.
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
4” x 1.25” SWIVEL CASTERS W/LOCKS
of an all welded double reinforced steel frame combined with a heavy gauge baseplate and (2) sets of safety chains
LARGE LIQUID CYLINDER CARTS
LARGE SINGLE CYL. CARTS (MAX. CYL. DIA. - 16”)
These heavy-duty single cylinder carts are designed to carry (1) cylinder no greater than 16” in diameter. The combination
makes these carts rugged and dependable in any application.
These heavy-duty carts are designed for greater VERSATILITY AND SAFETY. No need for a special cart to handle
LARGE LIQUID CYLINDER CARTS
a 3 point tilt design, heavy-duty reinforced light weight tubing frame, top ring safety chain, fast adjusting nylon bellyband and large 6” heavy duty rear locking casters that can be easily removed and replaced for repair and maintenance.
NO. 87U-4SHEIGHT: 46” WIDTH: 28” (O.D.)
WEIGHT: 124 lbs.
HANDLES THE MOST POPULAR AND TALLEST CYLINDERS ON THE MARKET TODAY. (INCLUDING - TAYLOR WARTON XL55)
NO. 86U-4HEIGHT: 46” WIDTH: 26” (O.D.)
WEIGHT: 85 lbs.
ADDITIONAL MODELS WITH DIFFERENT WHEEL TYPES TO CHOOSE FROM (NOT SHOWN).
WHEEL TYPE:16” X 4.00” SOLID RUBBER (BB)
6” x 2” SWIVEL CASTERS W/LOCKS
WHEEL TYPE:10” X 2.75” SOLID RUBBER (BB)
6” x 2” SWIVEL CASTERS W/LOCKS
FAST ACTION ADJUSTABLE VERTICAL LIFTING HOOK (PATENT PENDING) HANDLES A LARGE VARIETY OF LIQUID CYLINDERS
FAST ACTION SELF-SETTING “BELLYBAND” WITH THUMB RELEASE FOR ADDED SAFETY WHEN TRANSPORTING A CYLINDER LONG DISTANCES OVER ROUGH OR UNEVEN SURFACES.
LIFTING HOOK RANGE:55” to 62”
(MEASURE FROM THE GROUND TO THE TOP OFTHE CYL. EYELET HOLE)
OPERATION INSTRUCTION LABELS, IN PICTURE FORM, SHOWING HOW TO USE THE CART.
HEAVY-DUTY DOUBLE REINFORCED TUBING FRAME DESIGN.
LARGE 6” HEAVY-DUTY LOCKING SWIVEL CASTERS THAT CAN EASILY BE REMOVED FOR REPAIR OR REPLACEMENT.
NO. 87U-4HEIGHT: 46” WIDTH: 28” (O.D.)
WEIGHT: 92 lbs.
WHEEL TYPE:16” x 4.00” PNEUMATIC (BB)
This unique modern design (patent pending) provides for safe and easy handling of large liquid cylinders. These carts
HEAVY-DUTY SINGLE CYLINDER DELIVERY CARTS
NO. 54-SAHEIGHT: 48” WIDTH: 18” (O.D.)
WEIGHT: 42 lbs.
Designed to handle various size cylinders, these carts will handle oxygen, acetylene, helium, propane, nitrogen, CO etc. or any cyl. up to 12” in diameter. Features include a specially designed reinforced steel bottom plate that allows for transporting boxes, supplies or cylinders safely with ease. SC MODEL CARTS come equipped with stair climbers to assist when handling cylinders or other objects up and down stairs or over uneven surfaces.
NO. 54HEIGHT: 48” WIDTH: 18” (O.D.)
WEIGHT: 38 lbs.
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
WHEEL TYPE:10” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:14” x 1.75” SOLID RUBBER (BB)
WHEEL TYPE:10” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
STAIR CLIMBER MODELS
NO. 54PNHEIGHT: 48” WIDTH: 22” (O.D.)
WEIGHT: 37 lbs.
NO. 54-14HEIGHT: 48” WIDTH: 17” (O.D.)
WEIGHT: 43 lbs.
NO. 54PN-SCHEIGHT: 48” WIDTH: 22” (O.D.)
WEIGHT: 39 lbs.
NO. 54-SCHEIGHT: 48” WIDTH: 18” (O.D.)
WEIGHT: 40 lbs.
Designed and balanced for those who transport high pressure cylinders on a daily basis, these carts are equipped with rear assemblies that relieve the operator from a heavy load. Four popular models are available to accommodate your delivery needs. Choice of solid or pneumatic tires.
NO. 54-FRAHEIGHT: 48” WIDTH: 18” (O.D.)
WEIGHT: 46 lbs.
NO. 54PN-FRAHEIGHT: 48” WIDTH: 22” (O.D.)
WEIGHT: 45 lbs.
THESE MODELS HAVE A FOLDABLE REAR ASSEMBLY THAT CAN BE QUICKLY UNLOCKED AND CLOSED FOR COMPACT STORAGE. EQUIPPED WITH LARGE 4” CASTERS, REMOVABLE FOR REPAIR OR REPLACEMENT. NOT RECOMMENDED FOR 6000 lb. PSI CYLINDERS.
STATIONARY BACK ASSEMBLY WITH LARGE 4” REAR CASTERS.
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
WHEEL TYPE:10” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
WHEEL TYPE:10” x 4.00” PNEUMATIC (BB)
NO. 54PN-SAHEIGHT: 48” WIDTH: 22” (O.D.)
WEIGHT: 41 lbs.
ALL MODELS ON THIS PAGE HAVE A LOAD RATING OF 500 LBS.
NO. 54-SA RECOMMENDED FOR 6000 lb. PSI CYLINDERS
HEAVY-DUTY DUAL CYLINDER DELIVERY CARTS
NO. 55-3B-SAHEIGHT: 48” WIDTH: 21” (O.D.)
WEIGHT: 55 lbs.
Designed for the needs of those that need to do more than just handle cylinders on a daily basis, these carts feature a specially constructed toeplate that allows the operator to load & transport supplies or move objects safely with ease. Choice of solid or pneumatic wheel models available.
NO. 55HEIGHT: 48” WIDTH: 29” (O.D.)
WEIGHT: 55 lbs.
ALL MODELS ON THIS PAGE HAVE A LOAD RATING OF 500 LBS.
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
WHEEL TYPE:10” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:10” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
NO. 55PNHEIGHT: 48” WIDTH: 33” (O.D.)
WEIGHT: 54 lbs.
NO. 55-3BHEIGHT: 48” WIDTH: 21” (O.D.)
WEIGHT: 38 lbs.
NO. 55PN-3BHEIGHT: 48” WIDTH: 25” (O.D.)
WEIGHT: 37 lbs.
Designed and balanced to transport (2) 244 to 330 cu. ft. high pressure cylinders on a daily basis, the carts below are equipped with rear assemblies that relieve the operator from the heavy load. Four popular models are available to accommodate your delivery needs.
NO. 55-3B-FRAHEIGHT: 48” WIDTH: 21” (O.D.)
WEIGHT: 50 lbs.
NO. 55PN-3B-FRAHEIGHT: 48” WIDTH: 25” (O.D.)
WEIGHT: 49 lbs.
STATIONARY BACK ASSEMBLY WITH LARGE 4” REAR CASTERS.
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
WHEEL TYPE:10” x 4.00” PNEUMATIC (BB)
WHEEL TYPE:10” x 2.75” SOLID RUBBER (BB)
WHEEL TYPE:10” x 4.00” PNEUMATIC (BB)
NO. 55PN-3B-SAHEIGHT: 46” WIDTH: 25” (O.D.)
WEIGHT: 54 lbs.
The most popular style delivery carts on the market, these sleek carts are designed with a dual grip handle so the operator can maneuver (2) large high pressure cylinders with ease. Choice of solid or pneumatic wheel models available.
THESE MODELS HAVE A FOLDABLE REAR ASSEMBLY THAT CAN BE QUICKLY UNLOCKED AND CLOSED FOR COMPACT STORAGE. EQUIPPED WITH LARGE 4” CASTERS, REMOVABLE FOR REPAIR OR REPLACEMENT. NOT RECOMMENDED FOR 6000 lb. PSI CYLINDERS.
HEAVY-DUTY GAS CYLINDER PALLETS
NO. CPR-1600HEIGHT: 36” WIDTH: 43” (O.D.)
DEPTH: 43” (O.D) WEIGHT: 275 lbs. 16 CYLINDERS
WORKING AREA:(INSIDE DIMENSION)
W D CPR-1600 (41” x 40”)
This heavy-duty movable cylinder pallet is designed to accommodate up to 16 high or low pressure cylinders (up to 9 1/2” in dia. each) or 4 large liquid cylinders (up to 20” in dia. each) with ease. Features
gauge side rails, forklift runners and a heavy-duty 2” 5000 lb. rated nylon ratchet load binder. DIAMOND
NO. MGS-400HEIGHT: 41” WIDTH: 34” (O.D.)
DEPTH: 22” (O.D) WEIGHT: 130 lbs. 4 CYLINDERS
These units are designed to hold high pressure cylinders (up to 9 1/2” in dia.) securely in place for easy storage & forklift mobility. Hinged retainer bars with hitch pin & safety chain provide safe cylinder containment and convenient access from each side.
reinforced side rails and 7” wide forklift pockets with lock down bolts for extra safety.
MOVABLE GAS CYLINDER STANDS
NO. ELB-8HEIGHT: 42” WIDTH: 24” (O.D.)
DEPTH: 65” (O.D) WEIGHT: 230 lbs. 8 CYLINDERS
Designed to safely transport high & low pressure cylinders (up to 9 1/2” in dia.) wherever needed, and store them when not in use. Features include a 1/4”
frame, convenient hinged loading ramps, large 6” x 2” casters with locks & individual cylinder pockets with heavy duty safety chain & snap hooks.
EASY-LOADING GAS CYLINDER BUGGIES
GROUNDCLEARANCE
4 1/2”
FLOOR PLATE IS AVAILABLE UPON REQUEST.
HOLDS HIGH & LOW PRESSURE CYLINDERS UP TO 9 1/2” IN DIA.
*
*
NO. MCR-400HEIGHT: 30” WIDTH: 29” (O.D.)
DEPTH: 20” (O.D) WEIGHT: 56 lbs.
H & T SIZE HIGH PRESSURE MODULAR CYL. RACKS
NO. CH-200-CHEIGHT: 48” DEPTH: 10” (O.D.)
WIDTH: 24” (O.D.) WEIGHT: 22 lbs.
DUAL CYLINDER
BOLT DOWN ANGLEBRACKETS.
(NOT FOR VEHICLE USE)
These heavy-duty modular cylinder racks are ruggedly constructed and have been designed to be anchored to the
cylinder individually.
SAFETY:
COMPLIES WITH ALL SEISMIC ZONE4 REGULATIONS IN THE UNIFORMBUILDING CODE (UBC).
MEETS OR EXCEEDS OSHAREQUIREMENTS.
BOLT TOGETHER
ANCHOR TO FLOOR
CYLINDER CAPACITY: 4 CYLINDER CAPACITY: 6 CYLINDER CAPACITY: 8
NO. MCR-600HEIGHT: 30” WIDTH: 29” (O.D.)
DEPTH: 30” (O.D) WEIGHT: 65 lbs.
NO. MCR-800HEIGHT: 30” WIDTH: 29” (O.D.)
DEPTH: 40” (O.D) WEIGHT: 85 lbs.
ADDITIONAL CHAINS INSTALLED HALF WAY UP RACK AVAILABLE. ADD 2C TO END OF MODEL NO. (EX - MCR-400-2C)
M, M60, H & T SIZE HIGH PRESSURE CYL. STANDS
NO MORE cylinder bottoms. NO MORE lifting heavy stands up over the top of cylinders. NO MORE damaged gauges or regulators. NO MORE unsafe cylinder “ride up” on the stand due to unsafe steel thumbscrews causing gouging, scraping and marring of cylinders (especially aluminum cylinders). in place, or quickly unlocked with our PATENTED cylinder placement band and large plastic turning knobs.
ENVIRONMENTALLY SAFE COLOR COATINGS
NO. 610F-EHEIGHT: 12” DEPTH: 18” (O.D.)
WIDTH: 18” (O.D.) WEIGHT: 14 lbs.
NO. 610FW-EHEIGHT: 12” DEPTH: 18” (O.D.)
WIDTH: 18” (O.D.) WEIGHT: 24 lbs.
This side is used to hold a 7” to 8 1/2” dia. cylinder.
(M or M60)
This side is used to hold a 9” to 9 1/2” dia. cylinder.
(H or T)
THIS PATENTED STAND HOLDS A 7” TO 9 1/2” CYLINDER.
The 610FW-E and 610FW-H3” x 1.50” rubber tired (125 lb.ea. L/R) casters for easier rolling over carpets and in and out of elevators.
M, M60, H & T SIZE HIGH PRESSURE CYL. ROLLING STANDS
NO. 610FW-HHEIGHT: 48” DEPTH: 18” (O.D.)
WIDTH: 18” (O.D.) WEIGHT: 25 lbs.
THESE MODELS ARE EQUIPPED WITH HEAVY-DUTY
3” x 1.50” REMOVABLE CASTERS W/ BRAKES
H & T SIZE (244 - 330 CUBIC FT.) CYL. CARTS
MODEL NO. 6114 and 6214 are single and dual cylinder carts recommended for the transport and handling of large high pressure cylinders. They feature newly designed longer handles for ease of mobility, large 10” solid rubber front wheels and 4” rear casters for better maneuverability over carpets and rough or uneven surfaces. These units are also equipped with a dual rear wheel retractable assembly. (Simply extend the rear mechanism into its locked position, tilt back and use). MODEL NO. 6114-R is equipped with a stationary rear assembly that is not retractable.
NO. 6114HEIGHT: 46” DEPTH: 15” (O.D.)
WIDTH: 15” (O.D.) WEIGHT: 30 lbs.WHEEL DIA: 10” x 1.75” SOLID RUBBER (BB)
CASTER: 4” x 1” SWIVEL / POST
SINGLE CYLINDER
NO. 6114-RHEIGHT: 46” DEPTH: 28” (O.D.)
WIDTH: 15” (O.D.) WEIGHT: 30 lbs.WHEEL DIA: 10” x 1.75” SOLID RUBBER (BB)
CASTER: 4” x 1” SWIVEL / POST
SINGLE CYLINDER
NO. 6214HEIGHT: 46” DEPTH: 28” (O.D.)
WIDTH: 25” (O.D.) WEIGHT: 41 lbs.WHEEL DIA: 10” x 1.75” SOLID RUBBER (BB)
CASTER: 4” x 1” SWIVEL / POST
DUAL CYLINDER
38”
RETRACTABLE
Large, easily replaceable, 4” swivel casters on all rear wheel retractable and stationary models.
NO. 6110HEIGHT: 46” DEPTH: 15” (O.D.)
WIDTH: 15” (O.D.) WEIGHT: 23 lbs.WHEEL DIA: 10” x 1.75” SOLID RUBBER (BB)
SINGLE CYLINDER
NO. 6210HEIGHT: 46” DEPTH: 15” (O.D.)
WIDTH: 25” (O.D.) WEIGHT: 31 lbs.WHEEL DIA: 10” x 1.75” SOLID RUBBER (BB)
DUAL CYLINDER
NO. 63DHEIGHT: 46” DEPTH: 15” (O.D.)
WIDTH: 15” (O.D.) WEIGHT: 27 lbs.WHEEL DIA: 10” x 1.75” SOLID RUBBER (BB)
SINGLE CYLINDER
38”
NOT RETRACTABLE
38”
RETRACTABLE
46”
HEAVY-DUTY DELIVERY MODEL
46”
NOTE: IF REQUESTING 10” x 4.00” PNEUMATIC TIRES ADD “PN” TO END OF MODEL NO. (IE: 6114-PN)
NO. 6304-M6HEIGHT: 40” DEPTH: 23”
WIDTH: 19” WEIGHT: 35 lbs.CASTER DIA: 4” x 1.50” CASTERS / LOCKS
CYL. CAP: (30) M4/M6/B
NO. 6604-M6HEIGHT: 40” DEPTH: 39”
WIDTH: 23” WEIGHT: 65 lbs.CASTER DIA: 4” x 1.50” CASTERS / LOCKS
CYL. CAP: (60) M4/M6/B
NEWLY DEVELOPED and much needed M4,M6 & B carts are designed for multiple cylinder transport and storage. The all-welded construction of heavy gauge materials insure greater durability and strength. Individual spacing, positive cylinder placement and weight distribution gives these units the right formula for safe handling.
MULTIPLE M2 SIZE CYLINDER CARTS AVAILABLE - CALL FOR DETAILS & PRICING.
MULTIPLE M4,M6 & B SIZE CYLINDER CARTS
MODEL NO. 610-CSM6 is a cylinder stand designed to hold (1) M4,M6 or
MODEL NO. 610WM-M6 is a wall mount designed to hold (1) M4,M6 or B size tank.
SINGLE M4,M6 & B SIZE CYL. CARTS ,STANDS, MOUNTS
MODEL NO. 6105-M6 is a single cyl. cart designed to carry (1) M4,M6 or B size tank.
NO. 610WM-M6HEIGHT: 7” DEPTH: 4”
WIDTH: 4” WEIGHT: 2 lbs.
NO. 610-CSM6HEIGHT: 6” DEPTH: 7 3/4”
WIDTH: 7 3/4” WEIGHT: 2 lbs.
NO. 6105-M6HEIGHT: 41” DEPTH: 10”
WIDTH: 12” WEIGHT: 7 lbs.WHEEL DIA: 6” SEMI. PNEU.
M4
M6/B
M4
M6/B
NEWLY DEVELOPED and much needed M4,M6 & B stands are designed for multiple cyl. storage. The all-welded construction of heavy gauge materials insure greater durability and strength. Individual spacing, positive cyl. placement and weight distribution gives these units the right formula for safe storage.
MULTIPLE M2 SIZE CYL. STANDS AVAILABLE - CALL FOR DETAILS & PRICING.
NO. 6100-M6HEIGHT: 12” DEPTH: 20”
WIDTH: 8” WEIGHT: 10 lbs.
CYL. CAP: (10) M4/M6/B
NO. 6300-M6HEIGHT: 16” DEPTH: 23”
WIDTH: 19” WEIGHT: 30 lbs.
CYL. CAP: (30) M4/M6/B
NO. 6600-M6HEIGHT: 16” DEPTH: 39”
WIDTH: 23” WEIGHT: 60 lbs.
CYL. CAP: (60) M4/M6/B
NO. PB-10M6HEIGHT: 7” DEPTH: 21”
WIDTH: 9” WEIGHT: 10 lbs.
HOLDS (1) 6100-M6 RACK
MULTIPLE M4,M6 & B SIZE CYLINDER STANDS
help protect the surfaces of steel and aluminum cylinders from being scratched, gouged, scraped, or marred. These bumpers also eliminate the clanging noise when cylinders are in transport. NOTE: do not come off.
BUMPER GUARD KITPART NO. MODELS
CYLINDERCAPACITY
6300-M6, 6304-M66600-M6, 6604-M66100-M66060-M66120-M6
BUMPERSPER KIT
306010
612
BG-30M6BG-60M6BG-10M6BG-06M6BG-12M6
142284
543462
NO. 6060-M6HEIGHT: 19.5” DEPTH: 10”
WIDTH: 12” WEIGHT: 11 lbs.
CYL. CAP: (6) M4/M6/B
NO. 6120-M6HEIGHT: 19.5” DEPTH: 12”
WIDTH: 18” WEIGHT: 16 lbs.
CYL. CAP: (12) M4/M6/B
SOLD SEPARATELY
Bolt down bars & feet on these models.
FITS
cylinder stands and racks. These newly designed plastic bumper guards (RIM CART) RIM carts has developed a unique cylinder protection system for it’s multiple cylinder carts,
BUMPER GUARD KITS FOR M4,M6 & B SIZE CYL. CARTS AND STANDS.
These multiple M7, M9, C, D & E size cylinder stands have been designed for use where there is a need for multiple cylinder storage and mobility is not a factor. The all-welded steel construction, combined with our newly designed tubular frame insures greater durability, strength and longer life of the unit.
MULTIPLE JUMBO D (JD) SIZE CYL. RACKS AVAILABLE - CALL FOR DETAILS & PRICING.
NO. 6040HEIGHT: 19.5” DEPTH: 12.5”
WIDTH: 10.5” WEIGHT: 10 lbs.
CYLINDER CAPACITY: 4
NO. 6060HEIGHT: 19.5” DEPTH: 12”
WIDTH: 15” WEIGHT: 13 lbs.
CYLINDER CAPACITY: 6
NO. 6120HEIGHT: 19.5” DEPTH: 15”
WIDTH: 22” WEIGHT: 19 lbs.
CYLINDER CAPACITY: 12
NO. 6240HEIGHT: 19.5” DEPTH: 20”
WIDTH: 32” WEIGHT: 34 lbs.
CYLINDER CAPACITY: 24
MULTIPLE M7,M9,C, D & E SIZE CYL. STANDS
Bolt down bars and feet on these models.
NO. 6400HEIGHT: 20” DEPTH: 40”
WIDTH: 25” WEIGHT: 67 lbs.
CYLINDER CAPACITY: 40
HEAVY-DUTY D & E SIZE TRANSPORT CARTS
MEDIUM-DUTY M7, M9, C, D & E SIZE TRANSPORT CARTS
MODEL NO. 6246 is a rugged heavy-duty delivery cart designed to transport or store up to 24 D or E size cylinders. Constructed with a high quality heavy-gauge angle iron steel frame, this unit was tested and load rated using heavier steel cylinders rather than light weight aluminum cylinders. Other features include a removable handle, that can be put on the swivel caster side or the rigid caster side for the push or pulling comfort of the operator. Equipped with large 6” heavy-duty plate casters (2 locking swivel - 2 rigid) that can be easily removed for repair, maintenance or replacement.
MODEL NO. 6406 is a rugged heavy-duty cylinder delivery cart designed to hold up to 40 D or E size cylinders while in transport or storage. Constructed with a high quality heavy-gauge angle iron steel frame, this unit was tested and load rated using heavier steel cylinders rather than light weight aluminum cylinders. Other features include (2) removable handles, for shipping and storage purposes, and large 6” heavy-duty plate casters (4 locking swivel - 2 rigid) that can be easily removed for repair, maintenance or replacement.
NO. 6246HEIGHT: 45” DEPTH: 31 1/2” (O.D.)
WIDTH: 21 1/2” (O.D) WEIGHT: 75 lbs.CASTER DIA: 6”x 2” RUBBER SWIVEL / BRAKE
6” x 2” RUBBER RIGID
CYLINDER CAPACITY: 24
NO. 6406HEIGHT: 45” DEPTH: 46 1/2” (O.D.)
WIDTH: 25 1/4” (O.D) WEIGHT: 128 lbs.CASTER DIA: 6” x 2” RUBBER SWIVEL / BRAKE
6” x 2” RUBBER RIGID
CYLINDER CAPACITY: 40
NO. 6061HEIGHT: 42” DEPTH: 15”
WIDTH: 18” WEIGHT: 30 lbs.WHEEL DIA: 10” x 1.75” SOLID
CYL. CAPACITY: 6
NO. 6041HEIGHT: 42” DEPTH: 10”
WIDTH: 18” WEIGHT: 26 lbs.WHEEL DIA: 10” x 1.75” SOLID
CYL. CAPACITY: 4
NO. 6121HEIGHT: 42” DEPTH: 20”
WIDTH: 22” WEIGHT: 39 lbs.WHEEL DIA: 10” x 1.75” SOLID
CYL. CAPACITY: 12
NO. 6124HEIGHT: 42” DEPTH: 20”
WIDTH: 22” WEIGHT: 44 lbs.WHEEL DIA: 10” SOLID
CYL. CAPACITY: 12
NO. 6244HEIGHT: 42” DEPTH: 31 1/2”
WIDTH: 21 1/2” WEIGHT: 50 lbs. DIA: 4” x 1.50” W/ LOCKS
CYL. CAPACITY: 24
LAYERED M7,M9, C, D, & E SIZE CYL. CARTS & RACKS
Layered M7, M9, C, D & E type cylinder carts and racks are designed for easy storing of full and empty cylinders in the same unit. Constructed of heavy gauge square tubing, round bar, large 5” casters with locks and convenient full length push handles. The specially designed angled shelves are dirt and dust collection free, and when moisture
CYLINDER CAPACITY: (25) D / E or (50) M7 / M9 / C
LAYERED CARTS LAYERED RACKS
EACH UNIT IS INDIVIDUALLY BOXED - SOME ASSEMBLY REQUIREDCAUTION: ALWAYS LOAD CYLINDERS CAREFULLY.
BOLT DOWN FEET
NO. LR25 (sown)HEIGHT: 40” DEPTH: 32”
WIDTH: 27” WEIGHT: 87 lbs.
NO. LR25-SDRACK WITH REMOVABLE STEEL DOOR THAT
FIT STANDARD VALVE “E” TYPE CYLINDERS.
NO. LR25-SD-IVURACK WITH REMOVABLE STEEL DOOR THAT
FIT INTERGRATED VALVE UNIT (IVU) “E” TYPE CYLINDERS.
BUMPER GUARD KITNO. BG-25E-LR
NO. LC50-4 (shown)HEIGHT: 73” DEPTH: 32”
WIDTH: 27” WEIGHT: 190 lbs.CASTER DIA: 5” W/BRAKE
NO. LC50-4SD CART W/ REMOVABLE STEEL
DOORS THAT FIT STANDARD VALVE “E” TYPE CYLINDERS.
NO. LC50-4SD-IVUCART W/ REMOVABLE STEEL DOORS THAT FIT INTERGRATED VALVE UNIT
(IVU) “E” TYPE CYLINDERS.
BUMPER GUARD KITNO. BG-50E-LC
NO. LR50 (shown)HEIGHT: 66” DEPTH: 32”
WIDTH: 27” WEIGHT: 174 lbs.
NO. LR50-SDRACK W/ REMOVABLE STEEL
DOORS THAT FIT STANDARD VALVE “E” TYPE CYLINDERS.
NO. LR50-SD-IVURACK W/ REMOVABLE STEEL DOORS THAT FIT INTERGRATED VALVE UNIT
(IVU) “E” TYPE CYLINDERS.
BUMPER GUARD KITNO. BG-50E-LR
NO. LC25-4 (shown)HEIGHT: 40” DEPTH: 32”
WIDTH: 27” WEIGHT: 105 lbs.CASTER DIA: 5” W/BRAKE
NO. LC25-4SDCART WITH REMOVABLE STEEL DOOR THAT
FIT STANDARD VALVE “E” TYPE CYLINDERS.
NO. LC25-4SD-IVUCART WITH REMOVABLE STEEL DOOR THAT
FIT INTRERGRATED VALVE UNIT (IVU)“E” TYPE CYLINDERS.
BUMPER GUARD KITNO. BG-25E-LC
CYLINDER CAPACITY: (25) D / E or (50) M7 / M9 / C
CYLINDER CAPACITY: (50) D / E or (100) M7 / M9 / C CYLINDER CAPACITY: (50) D / E or (100) M7 / M9 / C
purchased with lockable steel doors and
upon request.
This SD style door is designed for use with standard valve type “E” cylinders. Max. Cyl. Length: 30”
This SD-IVU style door is designed for use with Intergrated Valve Unit (IVU) “E” type cyl’s. Max Cyl. Length: 35”.
Two door styles available
RIM Cart's Models can be
when securely strapped within a cart.
LAYERED M4,M6 & B CYLINDER CARTS & RACKS
Layered M4,M6 & B type cylinder carts and racks are designed for easy storing of full and empty cylinders in the same unit. Constructed of heavy gauge square tubing, round bar, large 5” casters with locks and convenient full length push handles. The specially designed shelves are dirt and dust collection free, and when moisture is present
NO. LC84-M6 (shown)HEIGHT: 40” DEPTH: 32”
WIDTH: 27” WEIGHT: 105 lbs.CASTER DIA: 5” W/BRAKE
NO. LC84-M6SDCART WITH REMOVABLE STEEL DOORS
BUMPER GUARD KITNO. BG-84M6-LC
LAYERED CARTS
NO. LC168-M6 (shown)HEIGHT: 73” DEPTH: 32”
WIDTH: 27” WEIGHT: 190 lbs.CASTER DIA: 5” W/BRAKE
NO. LC168-M6SDCART W/ REMOVABLE
STEEL DOORS
BUMPER GUARD KITNO. BG-168M6-LC
BOLT DOWN FEET
LAYERED RACKS
NO. LR84-M6 (shown)HEIGHT: 33” DEPTH: 32”
WIDTH: 27” WEIGHT: 85 lbs.
NO. LR84-M6SDRACK WITH REMOVABLE STEEL DOORS
BUMPER GUARD KITNO. BG-84M6-LC
NO. LR168-M6 (shown)HEIGHT: 66” DEPTH: 32”
WIDTH: 27” WEIGHT: 175 lbs.
NO. LR168-M6SDRACK W/ REMOVABLE
STEEL DOORS
BUMPER GUARD KITNO. BG-168M6-LR
CYLINDER CAPACITY: (84) M4 / M6 / B CYLINDER CAPACITY: (84) M4 / M6 / B
CYLINDER CAPACITY: (168) M4 / M6 / B CYLINDER CAPACITY: (168) M4 / M6 / B
EACH UNIT IS INDIVIDUALLY BOXED - SOME ASSEMBLY REQUIREDCAUTION: ALWAYS LOAD CYLINDERS CAREFULLY.
OPTIONAL BUMPER GUARD KIT AVAILABLE:These racks and carts can be adapted with the newly designed plastic bumper guards that easily snap into place & will not come off unless they are physically removed.
THESE GUARDS PROTECT THE CYL. FROM SCRATCHING & THE MARRING OF SPECIAL
COATINGS AND PAINT.
ELIMINATES THE CLANGING OF CYLINDERS AGAINST A METAL SURFACE.
REMOVABLE LOCKING STEEL DOORS AVAILABLE. ADD “SD” AFTER NO. (EXAMPLE: LC84-M6SD)
up to 24 D or E size cylinders. Constructed with a high quality heavy-gauge angle iron steel frame, this unit was tested and load rated using heavier steel cylinders rather than light weight aluminum cylinders. Other features include a removable handle, that can be put on the swivel caster side or the rigid caster side for the push or pulling comfort of the operator. Equipped with large 6” heavy-duty plate casters (2 locking swivel - 2 rigid) that can be easily removed for repair, maintenance or replacement.
40 D or E size cylinders while in transport or storage. Constructed with a high quality heavy-gauge angle iron steel frame, this unit was tested and load rated using heavier steel cylinders rather than light weight aluminum cylinders. Other features include (2) removable handles, for shipping and storage purposes, and large 6” heavy-duty plate casters (4 locking swivel - 2 rigid) that can be easily removed for repair, maintenance or replacement.
NO. 6246-LTLHEIGHT: 40” DEPTH: 31 1/2” (O.D.)
WIDTH: 21 1/2” (O.D) WEIGHT: 100 lbs.CASTER DIA: 6”x 2” RUBBER SWIVEL / BRAKE
6” x 2” RUBBER RIGID
CYLINDER CAPACITY: 24
NO. 6406-LTLHEIGHT: 40” DEPTH: 46 1/2” (O.D.)WIDTH: 25” (O.D) WEIGHT: 170 lbs.
CASTER DIA: 6” x 2” RUBBER SWIVEL / BRAKE6” x 2” RUBBER RIGID
CYLINDER CAPACITY: 40
HEAVY-DUTY HINGED
LOCKABLE TOPS.
LARGE HEAVY-DUTY 6”
REMOVABLEPLATE CASTERS
W/ BRAKES.
NO. CB50-4-SDHTLHEIGHT: 48” WIDTH: 42”
DEPTH: 32” WEIGHT: 180 lbs. 6” x 2” STEEL SWIVEL / BRAKES
6” x 2” STEEL RIGID
MAX. CYL. DEPTH: 30” (with doors closed)
NO. CB50-4SV-SDHTLHEIGHT: 48” WIDTH: 42”
DEPTH: 22” WEIGHT: 250 lbs.6” x 2” STEEL SWIVEL / BRAKES
6” x 2” STEEL RIGID
MAX. CYL. DEPTH: 20”(with doors closed)
NO. CB50-4LV-SDHTLHEIGHT: 48” WIDTH: 42”
DEPTH: 22” WEIGHT: 250 lbs. 6” x 2” STEEL SWIVEL / BRAKES
6” x 2” STEEL RIGID
MAX. CYL. DEPTH: 40”(wih doors closed)
place when closed.
HEAVY-DUTY DELIVERY CARTS
HEAVY-DUTY DELIVERY CARTS
MODEL NO. 6246-LTL is a rugged heavy-duty MODEL NO. 6406-LTL is a rugged heavy-duty delivery cart designed to transport or store compliant cylinder delivery cart designed to hold up to
RIM Cart’s CB50 series carts (pictured pn page 37) can be purchased with removable steel doors and a convienient hinged top lid that locks in
20” DEEP BASE
HEAVY-DUTY MULTI-CYLINDER DELIVERY CARTS
These heavy-duty carts are designed to transport multiple types and sizes of cylinders. Its unique slanted
to the rear of the cart for safety. Features include a
dual handles for easy maneuvering in tight places, heavy-duty rugged 6” steel locking casters and ratchet straps standard on all models. Phenolic, Neoprene and Polyurethane casters are available upon request.
(2) heavy-duty nylon ratchet straps are standard on every model to secure the cylinder load.
CYLINDER TYPE:
D or E ALUMINUM OXY.
D or E STEEL OXY.
M9 or C ALUMINUM OXY.
M6 or B ALUMINUM OXY.
(JD) ALUMINUM OXY.
HOLDS UP TO (PER LOAD)
68
81
68
130 +
56
ENVIRONMENTALLY SAFE COLOR COATINGS
NO. CB50-4SVHEIGHT: 48” WIDTH: 42”
DEPTH: 22” WEIGHT: 250 lbs.6” x 2” STEEL SWIVEL / BRAKES
6” x 2” STEEL RIGID
NO. CB50-4HEIGHT: 48” WIDTH: 42”
DEPTH: 32” WEIGHT: 180 lbs.6” x 2” STEEL SWIVEL / BRAKES
6” x 2” STEEL RIGID
NO. CB50-4LVHEIGHT: 48” WIDTH: 42”
DEPTH: 42” WEIGHT: 250 lbs. 6” x 2” STEEL SWIVEL / BRAKES
6” x 2” STEEL RIGID
NO. CB50-4-SDHEIGHT: 48” WIDTH: 42”
DEPTH: 32” WEIGHT: 180 lbs. 6” x 2” STEEL SWIVEL / BRAKES
6” x 2” STEEL RIGID
MAX. CYL. DEPTH: 30” (with doors closed)
NO. CB50-4SV-SDHEIGHT: 48” WIDTH: 42”
DEPTH: 22” WEIGHT: 250 lbs.6” x 2” STEEL SWIVEL / BRAKES
6” x 2” STEEL RIGID
MAX. CYL. DEPTH: 20”(with doors closed)When these models are
securely strapped within
carts (pictured above) can
compliant removable steel doors that prevent the cylinder load from shifting, moving or ejecting from the vehicle.
NO. CB50-4LV-SDHEIGHT: 48” WIDTH: 42”
DEPTH: 22” WEIGHT: 250 lbs. 6” x 2” STEEL SWIVEL / BRAKES
6” x 2” STEEL RIGID
MAX. CYL. DEPTH: 40”(wih doors closed)
20” DEEP BASE
40” DEEP BASE
40” DEEP BASE
30” DEEP BASE
30” DEEP BASE
rectangular design for compact nesting in delivery carts,
RIM Cart’s CB50 series
HEAVY-DUTY DELIVERY CARTS
a vehicle.
be purchased with
ALL MODELS AVAILABLE IN A CHROME PLATED FINISH OR ENVIRONMENTALLY SAFE COLOR COATINGS.WHEN SPECIFYING CHROME ADD “C” AFTER THE FIRST NUMBER - 6C108 .
These popular carts are designed to transport (1) 40, 80 or 150 cubic ft. cylinder no greater than 8 1/4” in diameter. Equipped with safety chains and large 8” wheels.
M & M60 SIZE CYLINDER CARTS AND STANDS
NO. 6108-CHEIGHT: 40” DEPTH: 12”
WIDTH: 13” WEIGHT: 14 lbs.WHEEL DIA: 8” SOLID RUBBER
CONTINUOUS HANDLE
NO. 6108HEIGHT: 40” DEPTH: 12”
WIDTH: 13” WEIGHT: 12 lbs.WHEEL DIA: 8” SOLID RUBBER
SINGLE POLE HANDLE
NO. 6108-4TSHEIGHT: 41” DEPTH: 20”
WIDTH: 20” WEIGHT: 11 lbs.CASTER DIA: 3” x 1” SWIVEL / LOCKS
4 WHEEL UNIT
NO. 6108-CSMHEIGHT: 6” DEPTH: 14”
WIDTH: 14” WEIGHT: 5 lbs.
HOLDS 1 “M” TANK
NO. 6108-CSM60HEIGHT: 6” DEPTH: 14”
WIDTH: 14” WEIGHT: 5 lbs.
HOLDS 1 “M60” TANK
SINGLE / DUAL D & E SIZE CYL. CARTS & STANDS
NO. 6105HEIGHT: 41” DEPTH: 10”
WIDTH: 12” WEIGHT: 7 lbs.WHEEL DIA: 6” SEMI PNEU.
GURNEY HOOK
NO. 6205HEIGHT: 41” DEPTH: 10”
WIDTH: 14” WEIGHT: 8 lbs.WHEEL DIA: 6” SEMI PNEU.
DUAL CYLINDER
NO. 610WMHEIGHT: 14” DEPTH: 5”
WIDTH: 5” WEIGHT: 4 lbs.
NO. 610-CSHEIGHT: 6” DEPTH: 9”
WIDTH: 9” WEIGHT: 4 lbs.