Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu &...

47
Rigid Metal Packaging Coatings – Product Catalogue

Transcript of Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu &...

Page 1: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Rigid Metal Packaging Coatings – Product Catalogue

Page 2: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 2 of 47

Article Group PageThree-Piece Food Cans – Exterior 3 – 4 Three-Piece Food Cans – Interior 5 – 6Two-Piece Food Cans – Exterior 7 – 9Two-Piece Food Cans – Interior 10 – 11Heat Seal Systems 12Easy Open Ends – Aluminium and Steel – Exterior/Interior 13 – 14Technical Packaging – Exterior 15 – 17Technical Packaging – Interior 18 – 19Three-Piece Aerosol Cans – Exterior 20Aerosol Can Tops & Domes – Interior 21Aerosol Can Tops & Domes – Exterior 22 – 23Side Stripe Coatings – Exterior 24Crown Corks – Exterior 25 – 26Crown Corks – Interior 27 – 28

Article Group Page Lug Caps – Exterior 29 – 30 Lug Caps – Interior 31 – 32 Aluminium Caps – Exterior 33 – 34 Aluminium Caps – Interior 35 Long Caps – Flat Sheet Application – Exterior 36 Long Caps – Flat Sheet Application – Interior 37 Long Caps – Side Wall Applications 38 Decorative Cans/Cigar Boxes – Exterior/Interior 39 Monobloc Aerosol Coatings – Interior 40 Monobloc Aerosol Coatings – Exterior 41 Monobloc Tubes – Exterior 42 Monobloc Bottles – Exterior/Interior 43 Drums – Exterior/Interior 44 – 45 Disclaimer 46 ACTEGA Products 47

Index

Page 3: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 3 of 47

Product Number Product Description Technical Features Remarks GL-79-OVN Gold lacquer Viscosity: 110 sec DIN 4, 20°C

Solids content: 41 % Film thickness: 5 g/m²/dry Drying: 12 min 205 °C

high coating speed excellent wetting properties in different gold shades

GL-300-MF Gold lacquer Viscosity: 120 sec DIN 4, 20°CSolids content: 47 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

based on polyester BADGE/BPA/MF-NI high flexibility sterilisation resistant

SL-693-20 Protective coating Viscosity: 95 sec DIN 4, 20°C Solids content: 38 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

based on epoxy-phenol resin combination colourless sterilisation resistant

EB-5108-series Stamping enamel white Viscosity 140 sec DIN 4, 20°CSolids content: 60 % Film thickness: 14 g/m²/dry Drying: 12 min 200 °C

based on polyester excellent flow BADGE/BPA/MF-NI UV & conv. – colours printable

EB-350-series Stamping enamel white Viscosity: 155-175 sec DIN 4, 20°CSolids content: 67-68.5 % Film thickness: 14 g/m²/dry Drying: 12 min 180 °C

based on polyester good flexibility BADGE/BPA/MF-NI UV & conv. - colours printable

EB-5508-9320 Stamping enamel white Viscosity: 160 sec DIN 4, 20°CSolids content: 68 % Film thickness: 14 g/m²/dry Drying: 12 min 200 °C

based on polyester good flexibility BADGE/BPA/MF-NI UV & conv. - colours printable

Exterior

Three-Piece Food Cans

Page 4: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 4 of 47

Product Number Product Description Technical Features Remarks GR-113 Size coat Viscosity: 90 sec DIN 4, 20°C

Solids content: 31 % Film thickness: 3 g/m²/dry Drying: 12 min 180°C

-UV & conv. - colours printable excellent flexibility

S-034-N Overprint varnish Viscosity: 60 sec DIN 4, 20°C Solids content: 51 % Film thickness: 4,5 g/m²/dry Drying: 12 min 160 °C

modified polyester self-greasing can be coated wet-in-wet not for temperatures >180 °c.

S-348-NF Overprint varnish Viscosity: 55 sec DIN 4, 20°C Solids content: 50 % Film thickness: 6 g/m²/dry Drying: 12 min 180 °C

polyester, BADGE/BPA-NI primer/base coat necessary good flexibility can be coated wet-in-wet

S-400 Overprint varnish Viscosity: 120 sec DIN 4, 20°CSolids content: 51 % Film thickness: 6 g/m²/dry Drying: 12 min 165°C

polyester, BADGE/BPA/MF-NI suitable for direct on metal good flexibility

Exterior

Three-Piece Food Cans

Page 5: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 5 of 47

Product Number Product Description Technical Features Remarks GL-79-OVN Gold lacquer Viscosity 110 sec DIN 4, 20°C

Solids content: 41 % Film thickness: 5 g/m²/dry Drying: 12 min 205 °C

universal gold lacquer double coating in combination with AL-96 particularly resistant against tomatoes

GL-300-MF Gold lacquer Viscosity: 120 sec DIN 4, 20°CSolids content: 47 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

BADGE, BPA/MF-NI polyester based flexible good product resistance

AL-96 Gold lacquer alu-pigmented

Viscosity: 135 sec DIN 4, 20°CSolids content: 40 % Film thickness: 7 g/m²/dry Drying: 12 min 200 °C

epoxy-phenol resin combination flexible stain resisant

AL-300-MF Gold lacquer alu-pigmented

Viscosity: 90 sec DIN 4, 20°C Solids content: 48 % Film thickness: 7 g/m²/dry Drying: 12 min 200 °C

BADGE, BPA/MF-NI polyester based flexible good product resistance

Interior

Three-Piece Food Cans

Page 6: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 6 of 47

Product Number Product Description Technical Features Remarks WZ-277-26 Interior protective coating

white Viscosity: 100 sec DIN 4, 20°CSolids content: 52 % Film thickness: 14 g/m²/dry Drying: 12 min 200 °C

based on epoxy resin combination universal coating high surface hardness excellent sterilisation resistance against acids

WZ-500-MF Interior protective coating white

Viscosity: 105 sec DIN 4, 20°CSolids content: 46 % Film thickness: 13 g/m²/dry Drying: 12 min 210 °C

polyester, BADGE/BPA/MF-NI flexible good product resistance

WZ-600 Interior protective coating white

Viscosity: 100 sec DIN 4, 20°CSolids content: 63 % Film thickness: 14 g/m²/dry Drying: 12 min 200 °C

polyester, BADGE/BPA/MF-NI universal coating good sterilization resistance against acids

SL-5000-M Protective coating Viscosity: 80 sec DIN 4, 20°C Solids content: 40 % Film thickness: 5 g/m²/dry Drying: 12 min 180 °C

polyester BADGE/BPA-NI on standard gold, aluminium or white for meat–release

Three-Piece Food Cans

Interior

Page 7: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 7 of 47

Product Number Product Description Technical Features Remarks GL-79-OVN Gold lacquer Viscosity: 110 sec DIN 4, 20°C

Solids content: 41 % Film thickness: 5 g/m²/dry Drying: 12 min 205 °C

universal gold lacquer

GL-300-MF Gold lacquer Viscosity 120 sec DIN 4, 20°CSolids content: 47 ±1 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

BADGE, BPA und MF-NI based on polyester gold high flexibility sterilisation resistant

01 KM 16/4 BV M Size coat Viscosity 55 sec DIN 4, 20°C Solids content: 41 % Film thickness: 2,5 g/m²/tdry Drying: 12 min 190°C

excellent flexibility Conv. colours printable BADGE, BPA and MF-NI

SL-693-20 Protective coating colourless

Viscosity: 95 sec DIN 4, 20°C Solids content: 38 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

self-greasing

Exterior

Two-Piece Food Cans

Page 8: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 8 of 47

Product Number Product Description Technical Features Remarks EB-5108-series Stamping enamel white Viscosity: 140 sec DIN 4, 20°C

Solids content: 60 % Film thickness: 14 g/m²/dry Drying: 12 min 200 °C

based on polyester excellent flow BADGE/BPA/MF-NI UV & conv. colours printable

EB-350-series Polyester white Viscosity: 155-175 sec DIN 4, 20°CSolids content: 67-68.5 % Film thickness: 14 g/m²/dry Drying: 12 min 180 °C

based on polyester good flexibility BADGE/BPA/MF-NI UV & conv. colours printable

EB-5508-9320 Stamping enamel white Viscosity: 160 sec DIN 4, 20°CSolids content: 68 % Film thickness: 14 g/m²/dry Drying: 12 min 200 °C

based on polyester good flexibility BADGE/BPA/MF-NI UV & conv. - colours printable

S-348-NF Overprint varnish Viscosity: 55 sec DIN 4, 20°C Solids content: 50 % Film thickness: 6 g/m²/dry Drying: 12 min 180 °C

polyester, BADGE-NI primer/base coat necessary – Suitable for Aluminium DRD cans good flexibility can be coated wet-in-wet

75 KM 366/3 NF Overprint varnish Viscosity: 55 sec DIN 4, 20°C Solids content: 47 % Film thickness: 5-6 g/m²/dry Drying: 12 min 185 °C

basis polyester, BADGE-NI suitable for DRD-cans, TP, TFS or Alu suitable for direct on metal (alu & tinplate)

Two-Piece Food Cans

Exterior

Page 9: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 9 of 47

Product Number Product Description Technical Features Remarks 75 KM 366/4 L Overprint varnish Viscosity: 55 sec DIN 4, 20°C

Solids content: 47 % Film thickness: 5-6 g/m²/dry Drying: 12 min 185 °C

basis polyester, BADGE-NI suitable for DRD-cans, TP, TFS or Alu wet-in-wet over conventional inks suitable for direct on metal (alu & tinplate)

S-400 Overprint varnish Viscosity: 120 sec DIN 4, 20°CSolids content: 51 % Film thickness: 6 g/m²/dry Drying: 12 min 165°C

polyester, BADGE/BPA/MF-NI suitable for direct on metal good flexibility

Exterior

Two-Piece Food Cans

Page 10: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 10 of 47

Product Number Product Description Technical Features Remarks GL-79-OVN Gold lacquer Viscosity: 110 sec DIN 4, 20°C

Solids content: 41 % Film thickness: 5 g/m²/dry Drying: 12 min 205 °C

universal gold lacquer based on epoxy-phenol resin combination low-priced

GL-115-KL Gold lacquer Viscosity: 60 sec DIN 4, 20°C Solids content: 35 % Film thickness: 5,5 g/m²/dry Drying: 12 min 200 °C

extremely good flexibility good resistance against acid

GL-300-MF Gold lacquer Viscosity: 120 sec DIN 4, 20°CSolids content: 47 ±1 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

BADGE, BPA/MF-NI polyester based flexible good product resistance

WZ-500-MF Interior protective coating white

Viscosity: 105 sec DIN 4, 20°CSolids content: 46 % Film thickness: 13 g/m²/dry Drying: 12 min 210 °C

based on polyester increased deep-drawing properties BADGE/BPA/MF-NI

Interior

Two-Piece Food Cans

Page 11: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 11 of 47

Product Number Product Description Technical Features Remarks AL-96 Gold lacquer alu-

pigmented Viscosity: 135 sec DIN 4, 20°CSolids content: 40 % Film thickness: 7 g/m²/dry Drying: 12 min 200 °C

based on epoxy-phenol resin combination resistant to marbling for fish and meat

AL-92-140-M Gold lacquer alu-pigmented

Viscosity 95 sec DIN 4, 20°C Solids content: 36 % Film thickness: 8 g/m²/dry Drying: 12 min 200 °C

based on epoxy-phenol resin combination stain resistant meat-release for meat

AL-300-MF Gold lacquer alu-pigmented

Viscosity 90 sec DIN 4, 20°C Solids content: 48 ±1 % Film thickness: 7 g/m²/dry Drying: 12 min 200 °C

polyester based BADGE, BPA/MF-NI flexible good product resistance

SL-5100-M Protective coating Viscosity 100 sec DIN 4, 20°CSolids content: 42 ±1 % Film thickness: 5 g/m²/dry Drying: 12 min 180 °C

based on polyester BADGE, BPA/MF-NI on polyester or epoxy-phenol basecoat flexible, meat-release

Two-Piece Food Cans

Interior

Page 12: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 12 of 47

Product Number Product Description Technical Features Remarks TN-111-1500 Heat-seal lacquer clear Viscosity 110 sec DIN 4, 20°C

Solids content: 31 % Film thickness: 9 g/m²/dry Drying: 12 min 200 °C

based on epoxy resin combination on tinplate or aluminium or on WZ-279-10

TN-350-1-MF Heat-seal lacquer colourless

Viscosity 100 sec DIN 4, 20°C Solids content: 30 % Film thickness: 9 g/m²/dry Drying: 12 min 200 °C

based on polyester, BADGE/ BPA/MF-NI good product resistance in combination with GR-500-MF or GR-350-1-MF

TN-500 Heat-seal lacquer white Viscosity 110 sec DIN 4, 20°C Solids content: 36 % Film thickness: 6,5 g/m²/dry Drying: 15 sec. 335 °C PMT: 260°C

epoxy resin combination 2-comp. version available for better stability

TN-550-MF Heat-seal lacquer white Viscosity: 90 sec DIN 4, 20°C Solids content: 40 % Film thickness: 10 g/m²/dry Drying: 12 min 190 °C

based on polyester, BADGE/BPA/MF-NI good product resistance can be used as single coat or over GR-350-1-MF as 2-coat system

GR-500-MF Base coat white Viscosity 100 sec DIN 4, 20°C Solids content: 47 % Film thickness: 8 g/m²/dry Drying: 12 min 180 °C

based on polyester, BADGE/BPA/MF-NI base coat for TN-350-1-MF

WZ-279-10 Base coat white Viscosity 145 sec DIN 4, 20°C Solids content: 43 % Film thickness: 8 g/m²/dry Drying: 12 min 180 °C

based on epoxy resin combination base coat for TN-111-1510

Heat-Seal Systems

Page 13: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 13 of 47

Product Number Product Description Technical Features Remarks RLC 16052 Gold Varnish Viscosity 120 sec DIN 4, 20°C

Solids content: 34 % Film thickness: 5.5 g/m²/dry Drying: 12 min 200 °C

based on polyester, BADGE/BPA/MF-NI, FDA Suitable for as Finishing Varnish, direct Substrate Good Chemical resistance Version colorless available = RLC 23052

GR-083 Base coat Viscosity 90 sec DIN 4, 20°C Solids content: 37 % Film thickness: 3 g/m²/dry Drying: 14 sec. 370°C / PMT 232°C

epoxy-phenol resin combination interior side easy-open ends steel system with gold lacquer GLO-095

GLO-095 Gold organosol Viscosity 90 sec DIN 4, 20°C Solids content: 45 % Film thickness: 9 g/m²/dry Drying: 12 min 210 °C

organosol BADGE/BPA/MF -NI interior side easy-open ends for fish cans for steel easy-open ends with base coat GR-083

GLO-295/1 Gold organosol Viscosity 90 sec DIN 4, 20°C Solids content: 45 % Film thickness: 12,5 g/m²/dry Drying: 12 min 210°C

Organosol BADGE/BPA/MF-NI Tinplate: AL-300-MF + GLO-295/1 Aluminium: 2 x 10 g/m² GLO-295/1

Easy Open Ends Aluminium and Steel

Exterior/Interior

Page 14: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 14 of 47

Product Number Product Description Technical Features Remarks AL-300-MF Gold lacquer alu-

pigmented Viscosity 90 sec DIN 4, 20°C Solids content: 48 ±1 % Film thickness: 10 g/m²/dry Drying: 12 min 180 °C

polyester based BADGE, BPA/MF-NI flexible good product resistance

01 KM 16/4 BV M Size coat Viscosity 55 sec DIN 4, 20°C Solids content: 41 % Film thickness: 2,5 g/m²/tdry Drying: 12 min 190°C

excellent flexibility Conv. colours printable BADGE, BPA and MF-NI Used only for External end uses

75 KM 366/4 L Overprint varnish Viscosity: 55 sec DIN 4, 20°C Solids content: 47 % Film thickness: 5-6 g/m²/dry Drying: 12 min 185 °C

basis polyester, BADGE/BPA-NI suitable for DRD-cans wet-in-wet aluminium and tinplate (also directly coatable)

Easy Open Ends Aluminium and Steel

Exterior/Interior

Page 15: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 15 of 47

Product Number Product Description Technical Features Remarks EB-5108-series Stamping enamel white Viscosity: 140 sec DIN 4, 20°C

Solids content: 60 % Film thickness: 14 g/m²/dry Drying: 12 min 200 °C

based on polyester very good flow BADGE-NI

EB-350-series Polyester white Viscosity: 155-175 sec DIN 4, 20°CSolids content: 67- 68.5 % Film thickness: 14 g/m²/dry Drying: 12 min 180 °C

based on polyester good fexibility BADGE-NI UV & conv. colours printable

EB-5508-9320 Stamping enamel white Viscosity: 160 sec DIN 4, 20°CSolids content: 68 % Film thickness: 14 g/m²/dry Drying: 12 min 160 °C

based on polyester good flexibility BADGE/BPA/MF-NI UV & conv. - colours printable

Technical Packaging

Exterior

Page 16: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 16 of 47

Product Number Product Description Technical Features Remarks 01 KM 16/4 M3 Size coat Viscosity: 55 sec DIN 4, 20°C

Solids content: 43 % Film thickness: 2,5 g/m²/dry Drying: 12 min 190°C

polyester, BADGE/BPA/MF-NI exterior coating UV & conv. colours printable excellent flexibility

GR-113 Size coat Viscosity: 90 sec DIN 4, 20°C Solids content: 31 % Film thickness: 3 g/m²/dry Drying: 12 min 180°C

-UV & conv. - colours printable excellent flexibility

SL-693-557 Protective coating colourless

Viscosity: 110 sec DIN 4, 20°CSolids content: 38 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

based on epoxy resin combination e. g. for the exterior coating of printing ink cans

S-034-N Overprint varnish Viscosity: 60 sec DIN 4, 20°C Solids content: 51 % Film thickness: 4,5 g/m²/dry Drying: 12 min 160 °C

based on alkyd self-greasing can be coated wet-in-wet not for temperatures >180°C

SL-5100-LR Protective coating colourless, laser-markable

Viscosity: 150 sec DIN 4, 20°CSolids content: 48 % Film thickness: 6 g/m²/dry Drying: 12 min 200 °C

BADGE/BPA/MF-NI laser-markable with CO2 laser, writing white must be thinned with 10% gold available, writing brown-black

Exterior

Technical Packaging

Page 17: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 17 of 47

Product Number Product Description Technical Features Remarks S-348-NF Overprint varnish Viscosity: 55 sec DIN 4, 20°C

Solids content: 50 % Film thickness: 6 g/m²/dry Drying: 12 min 180 °C

polyester, BADGE-NI primer/base coat necessary good flexibility can be coated wet-in-wet

75 KM 368 NF HV (BPA NI)

Overprint varnish Viscosity: 75 sec DIN 4, 20°C Solids content: 56 % Film thickness: 5 g/m²/dry Drying: 12 min 150 °C

based on polyester, BPA-NI can be coated wet-in-wet, very low stoving excellent ink-jet properties excellent abrasion resistance

S-034-N Overprint varnish Viscosity: 60 sec DIN 4, 20°C Solids content: 51 % Film thickness: 4,5 g/m²/dry Drying: 12 min 160 °C

based on alkyd self-greasing can be coated wet-in-wet not for temperatures >180°C

S-400 Overprint varnish Viscosity: 120 sec DIN 4, 20°CSolids content: 51 % Film thickness: 6 g/m²/dry Drying: 12 min 165°C

polyester, BADGE/BPA/M-NI suitable for direct on metal good flexibility

S26024/8 WB Overprint varnish Viscosity: 60 sec DIN 4, 20°C Solids content: 40 % Film thickness: 5 g/m²/dry Drying: 12 min 160 °C

WB polyester / BADGE/BPA/MF-NI excellent abrasion resistance can be overcoated with itself, repairable

RLC 06011/2 UV Overprint varnish Viscosity: 55 sec DIN 4, 20°C Solids content: 100 % Film thickness: 5 g/m²/dry Drying: 0,66 J/m²

exterior coating for „expanded“ cans high scratch resistance Recoatable by itself

Exterior

Technical Packaging

Page 18: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 18 of 47

Product Number Product Description Technical Features Remarks GL-79-OVN Gold lacquer Viscosity: 110 sec DIN 4, 20°C

Solids content: 41 % Film thickness: 5 g/m²/dry Drying: 12 min 205 °C

based on epoxy-phenol resin combination can be used universally for all tin materials

WL109086 Base coat beige Viscosity: 110 sec DIN 4, 20°CSolids content: 42 % Film thickness: 11 g/m²/dry Drying: 12 min 200 °C

one-layer coating possible in a system with WL107920 or WL105695 particularly resistant against water-based dispersions

WL107920 Interior protective coating Viscosity: 100 sec DIN 4, 20°CSolids content: 50 % Film thickness: 7 g/m²/dry Drying: 12 min 200 °C

organosol on WL109086

EB-106002 Wash primer beige Viscosity: 100 sec DIN 4, 20°CSolids content: 45 % Film thickness: 12 g/m²/dry Drying: 12 min 180 °C

base coat for WL105728 or WL107031

Technical Packaging

Interior

Page 19: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 19 of 47

Product Number Product Description Technical Features Remarks WL107031 Interior protective coating Viscosity: 90 sec DIN 4, 20°C

Solids content: 58 % Film thickness: 9 g/m²/dry Drying: 12 min 210 °C

on EB-106002 system shows excellent resistance against solvent-containing products

GL-115-KL Gold lacquer Viscosity: 60 sec DIN 4, 20°C Solids content: 35 % Film thickness: 5,5 g/m²/dry Drying: 12 min 200 °C

extremely good flexibility good resistance As top coat over WL109086

IP-100-OS 2-component interior protective spray coating

Viscosity: ThixotropSolids content: 56 % Film thickness: 48 g/m²/dry Drying: 15 min 190 °C

spray coating on EB-106002 system shows excellent resistance

Technical Packaging

Interior

Page 20: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 20 of 47

Product Number Product Description Technical Features Remarks EB-5030-9333F Stamping enamel white Viscosity: 120 sec DIN 4, 20°C

Solids content: 60 % Film thickness: 16 g/m²/dry Drying: 12 min 200 °C

based on polyester-melamin resin can also be processed non-varnish

EB-350 Stamping enamel white Viscosity: 155-175 sec DIN 4, 20°CSolids content: 67-68 % Film thickness: 14 g/m²/dry Drying: 12 min 180 °C

based on polyester good flexibility BADGE -NI UV & conv. colours printable

01 KM 16/4 M3 Size coat Viscosity: 55 sec DIN 4, 20°C Solids content: 43 % Film thickness: 2,5 g/m²/dry Drying: 12 min 190°C

polyester, BADGE/BPA/MF-NI exterior coating UV & conv. colours printable excellent flexibility

75 KM 368 NF (BPA-NI)

Overprint varnish Viscosity: 55 sec DIN 4, 20°C Solids content: 52 % Film thickness: 5 g/m²/dry Drying: 12 min 150 °C

based on polyester, BPA -NI can be coated wet-in-wet, very low stoving excellent ink-jet properties excellent abrasion resistance

S-160-M Overprint varnish Viscosity: 95 sec DIN 4 20°C Solids content: 37 % Film thickness: 5 g/m²/dry Drying: 12 min 180 °C

based on epoxyester in combination with stamping enamel EB-5015-108 can be coated wet-in-wet

S-26024/8 WB Overprint varnish Viscosity: 60 sec DIN 4 20°C Solids content: 40 % Film thickness: 5 g/m²/dry Drying: 12 min 160 °C

WB polyester / BADGE/BPA/MF-NI excellent abrasion resistance can be overcoated with itself

3-Piece Aerosol Cans

Exterior

Page 21: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 21 of 47

Product Number Product Description Technical Features Remarks GL-112-10 Interior protective coating

gold Viscosity: 85 sec DIN 4, 20°C Solids content: 40 % Film thickness: 4,5 g/m²/dry Drying: 12 min 205 °C

epoxy-phenol resin combination good resistance

WL109086 Interior protective coating beige

Viscosity: 110 sec DIN 4, 20°CSolids content: 42 % Film thickness: 11 g/m²/tr. g/m²/dry Drying: 12 min 200 °C

epoxy-phenol resin combination good resistance

71 KT 408/5 Interior protective coating gold

Viscosity: 50 sec DIN 4, 20°C Solids content: 35 % Film thickness: 5 g/m²/tr. g/m²/dry Drying: 12 min 205 °C

epoxy-phenol resin combination good resistance also suitable for body of 3p Aerosol cans

WL107888 Base coat colourless Viscosity: 30 sec DIN 4, 20°C Solids content: 27 % Film thickness: 2 g/m²/dry Drying: 12 min 200 °C

epoxy resin base coat for WL107910

WL107910 Gold lacquer dark gold Viscosity: 80 sec DIN 4, 20°C Solids content: 35 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

good flexibility epoxy resin

Aerosol Can Tops and Domes

Interior

Page 22: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 22 of 47

Product Number Product Description Technical Features Remarks EB-350-series Stamping enamel white Viscosity: 155-175 sec DIN 4, 20°C

Solids content: 67-68.5 % Film thickness: 14 g/m²/dry Drying: 12 min 180 °C

based on polyester good flexibility BADGE-NI UV & conv. colours printable

EB 5108-series Stamping enamel white Viscosity 140 sec DIN 4, 20°CSolids content: 60 % Film thickness: 14 g/m²/dry Drying: 12 min 200 °C

based on polyester excellent flow BADGE -NI

GR-5023 Base coat Viscosity: 60 sec DIN 4, 20°C Solids content: 37 % Film thickness: 3 g/m²/dry Drying: 12 min 180°C

polyester, BADGE/BPA-NI UV & conv. colours printable excellent flexibility GR-5023-MF melamin-NI version

Aerosol Can Tops and Domes

Exterior

Page 23: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 23 of 47

Product Number Product Description Technical Features Remarks 01 KM 16/4 M3 Size coat Viscosity: 55 sec DIN 4, 20°C

Solids content: 43 % Film thickness: 2,5 g/m²/dry Drying: 12 min 190°C

polyester, BADGE/BPA/MF-NI exterior coating UV & conv. colours printable excellent flexibility

71 KM 292 HES Overprint varnish Viscosity: 70 sec DIN 4, 20°C Solids content: 45 % Film thickness: 5 g/m²/dry Drying: 12 min 180°C

on stamping enamel can be coated wet-in-wet H2O2 resistance

S-160-M Overprint varnish Viscosity: 95 sec DIN 4, 20°C Solids content: 37 % Film thickness: 5 g/m²/dry Drying: 12 min 180°C

on stamping enamel can be coated wet-in-wet H2O2 resistance, also suitable for components

Interior

Aerosol Can Tops and Domes

Exterior

Page 24: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 24 of 47

Product Number Product Description Technical Features Remarks NA-424 2-component side stripe

coating hardener: NA-425

Viscosity: 18 sec DIN 4, 20°C Solids content: 28 % Film thickness: 10 μm Drying: harden for 48 hours at 20°C

epoxy resin / isocyanate combination very fast initial drying colourless satin glossy

NA-397 1-component side stripe coating

Viscosity: 20 sec DIN 4, 20°C Solids content: 33 % Film thickness: 26,5 μm Drying: 8 – 10 min 20°C tack--NI

acrylic resin very fast initial drying colourless satin glossy

Side Stripe Coating

Page 25: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 25 of 47

Product Number Product Description Technical Features Remarks RLC16103 Base coat Viscosity: 40 sec DIN 4, 20°C

Solids content: 41 % Film thickness: 2 g/m²/dry Drying: 12 min 195 °C

based on polyester UV & conv. colours printable Excellent flexibility Low dust performance with OPV 75 KM 356

EB-5108-series Stamping enamel white Viscosity: 140 sec DIN 4, 20°CSolids content: 60 % Film thickness: 14 g/m²/dry Drying: 12 min 200 °C

excellent wetting propertiesBADGE-NI

EB-350-series Polyester white Viscosity: 165 sec DIN 4, 20°CSolids content: 67-68.5 % Film thickness: 14 g/m²/dry Drying: 12 min 180 °C

based on polyester excellent flexibility

EB-5508-9320 Stamping enamel white Viscosity: 160 sec DIN 4, 20°CSolids content: 68 % Film thickness: 14 g/m²/dry Drying: 12 min 160 °C

based on polyestergood flexibility BADGE/BPA/MF-NI UV & conv. - colours printable

GL 79-OVN Gold lacquer Viscosity: 110 sec DIN 4, 20°CSolids content: 41 % Film thickness: 5 g/m²/dry Drying: 12 min 205 °C

based on epoxy-phenol resin combinationuniversal gold lacquer

RLC 12046/4

Aluminium base coat Viscosity: 45 sec DIN 4, 20°C Solids content: 42 % Film thickness: 2,5 g/m²/dry Drying: 12 min 190 °C

based on polyester excellent flexibility suitable for conv. and UV printing inks suitable for tinplate and aluminium

Exterior

Crown Corks

Page 26: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 26 of 47

Product Number Product Description Technical Features Remarks S-160-H Overprint varnish Viscosity: 110 sec DIN 4, 20°C

Solids content: 37 % Film thickness: 5 g/m²/dry Drying: 12 min 180°C

epoxyesteron stamping enamel or blank substrate can be coated excellently wet-in-wet

S-170 Overprint varnish Viscosity: 100 sec DIN 4, 20°CSolids content: 41 % Film thickness: 5 g/m²/dry Drying: 12 min 170°C

polyester, linoleate--NIBADGE//BPA/MF-NI

75 KM 356 Overprint varnish Viscosity: 55 sec DIN 4, 20°C Solids content: 47 % Film thickness: 5 g/m²/dry Drying 12 min 170 °C

based on polyester can be coated wet-in-wet BADGE//BPA/MF-NI Dust average <16mg

Exterior

Crown Corks

Page 27: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 27 of 47

Product Number Product Description Technical Features Remarks HLKU-60 Adhesive lacquer gold Viscosity: 95 sec DIN 4, 20°C

Solids content: 50 % Film thickness: 9 g/m²/dry Drying: 12 min 205 °C

for PVC granulates and plastisolese.g. Svelith™ & Noviseal™ compounds

HLKU-60-A Adhesive lacquer gold Viscosity: 95 sec DIN 4, 20°C Solids content: 50 % Film thickness: 9 g/m²/dry Drying: 12 min 205 °C

for twist-crownse.g. Svelith™ compounds

HLKU-65 Adhesive lacquer aluminium-pigmented

Viscosity: 95 sec DIN 4, 20°C Solids content: 50 % Film thickness: 9 g/m²/dry Drying: 12 min 205 °C

for PVC granulates and plastisolese.g. Svelith™ compounds

HLD-79-3 Adhesive lacquer gold Viscosity: 95 sec DIN 4, 20°C Solids content: 42 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

Usable for different PE types e.g. Svelon™ (855, 880, 874) & Oxylon™ compounds PVC—NI, based on epoxy-phenol Suitable for coil coating

HLD-79-3-R Adhesive lacquer gold Viscosity: 95 sec DIN 4, 20°C Solids content: 42 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

universally usable for different PE types e.g.Svelon™ & Oxylon™ compounds Best compound adhesion properties PVC—NI, based on epoxy-phenol

Interior

Crown Corks

Page 28: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 28 of 47

Product Number Product Description Technical Features Remarks HLD-79-880 Adhesive lacquer gold Viscosity: 95 sec DIN 4, 20°C

Solids content: 42 % Film thickness: 8,5 g/m²/dry Drying: 12 min 200 °C

for Svelon™ 520, & 880 TC, PVC-NI, based on epoxy-phenol Suitable for coil coating

HLD-79-40 Adhesive lacquer aluminium-pigmented

Viscosity: 100 sec DIN 4, 20°CSolids content: 39 % Film thickness: 6 g/m²/dry Drying: 12 min 200 °C

PVC-NIbased on epoxy-phenol resin combination for sticking for PE etc., e.g. Svelon™ & Oxylon™ compounds (not for Svelon 520 & 880)

HL22620 Adhesive lacquer gold Viscosity: 95 sec DIN 4, 20°C Solids content: 34 % Film thickness: 6 g/m²/dry Drying: 12 min 200 °C

for PP sticking, e.g. Svelon™ H29 (589/889) for milk closures sterilisation resistant

HLD-300-A Adhesive lacquer light gold

Viscosity: 100 sec DIN 4, 20°CSolids content: 347% Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

Polyester based, PVC, BPA and BADGE-NISuitable for coil coating can be used for different PE types, e.g. Svelon™ (855, 880 TC, 874) & Oxylon™ compounds

Crown Corks

Interior

Page 29: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 29 of 47

Product Number Product Description Technical Features Remarks GL-79-OVN Gold lacquer Viscosity: 110 sec DIN 4, 20°C

Solids content: 41 % Film thickness: 5 g/m²/dry Drying: 12 min 205 °C

epoxy-phenol resin combinationcan be used universally for all tin materials

EB-5108-series Stamping enamel Viscosity: 140 sec DIN 4, 20°CSolids content: 60 % Film thickness: 14 g/m²/dry Drying: 12 min 200 °C

very good flowvery good elasticity

EB-350-series Polyester white Viscosity: 155-175 sec DIN 4, 20°CSolids content: 67-68.5 % Film thickness: 14 g/m²/dry Drying: 12 min 180 °C

based on polyestergood flexibility BADGE -NI UV & conv. colours printable

01 KM 16/4 TO Size coat Viscosity: 55 sec DIN 4, 20°C Solids content: 40 % Film thickness: 2,( g/m²/dry Drying: 12 min 190°C

excellent flexibilityUV & conv. colours printable BADGE, BPA and MF-NI

RLC 16052 Gold Varnish Viscosity 120 sec DIN 4, 20°C Solids content: 34 % Film thickness: 5.5 g/m²/dry Drying: 12 min 200 °C

based on polyester, BADGE/BPA/MF-NI, FDA suitable as Finishing Varnish, direct Substrate but can be also varnished good Chemical resistance

Exterior

Lug Caps

Page 30: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 30 of 47

Product Number Product Description Technical Features Remarks S-380/2 Overprint varnish Viscosity: 78 sec DIN 4, 20°C

Solids content: 48 % Film thickness: 6 g/m²/dry Drying: 12 min 180 °C

polyester, BADGE/BPA-NIsterilisation resistant suitable for tinplate without base coat can be coated wet-in-wet High yellowing resistance – Suitable for sequence with Internal applied last pass.

S-348-NF Overprint varnish Viscosity: 55 sec DIN 4, 20°C Solids content: 50 % Film thickness: 6 g/m²/dry Drying: 12 min 180 °C

polyester, BADGE/BPA-NIprimer/base coat necessary good flexibility can be coated wet-in-wet

Exterior

Lug Caps

Page 31: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 31 of 47

Product Number Product Description Technical Features Remarks GR-500-MF Base coat white Viscosity: 100 sec DIN 4, 20°C

Solids content: 47 % Film thickness: 8 g/m² Drying: 12 min 180 °C

polyester, BADGE/BPA/MF-NIin combination with HLPT-60

HLPT-60 Adhesive lacquer Viscosity 95 sec DIN 4, 20°C Solids content: 50 % Film thickness: 9 g/m² Drying: 12 min 205 °C

Organosolonly in combination with GR-500-MF adhesive lacquer for Noviseal™ compounds

TPE-352-1-MF Adhesive lacquer Viscosity: 120 sec DIN 4, 20°C Solids content: 32 % Film thickness: 9 g/m²/dry Drying: 12 min 190 °C

polyester, BADGE/BPA/melamin-NIsuitable for Provalin™ compounds in combination on TPE-510-MF

TPE-510-MF Base coat white Viscosity: 90 sec DIN 4, 20°C Solids content: 44 % Film thickness: 8 g/m²/dry Drying: 12 min 180 °C

polyester, BADGE/BPA/MF-NIbase coat for TPE-352-1-MF & TPE-551-MF For very aggressive products 2 coats TPE-510-MF

TPE-551-MF Heat-seal lacquer white Viscosity: 90 sec DIN 4, 20°C Solids content: 42 % Film thickness: 9 g/m²/dry Drying: 12 min 190 °C

based on polyester, BADGE/BPA/MF-NIgood product resistance can be used as single coat (then 10 g/m²) or over TPE-510-MF as 2-coat system

Interior

Lug Caps

Page 32: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 32 of 47

Product Number Product Description Technical Features Remarks TPE-1500 Adhesive lacquer clear Viscosity: 110 sec DIN 4, 20°C

Solids content: 31 % Film thickness: 9 g/m²/dry Drying: 12 min 200 °C

epoxy resin combinationin combination on TPE-279 suitable for Provalin™ compounds

TPE-1500-W Adhesive lacquer white Viscosity: 110 sec DIN 4, 20°C Solids content: 34 % Film thickness: 9 g/m²/dry Drying: 12 min 200 °C

epoxy resin combinationin combination on TPE-279 suitable for Provalin™ compounds

TPE-279 Base coat white Viscosity: 145 sec DIN 4, 20°C Solids content: 43 % Film thickness: 8 g/m²/dry Drying: 12 min 180 °C

epoxy resin combinationbase coat for TPE-1500 / TPE-1500-W

Lug Caps

Interior

Page 33: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 33 of 47

Product Number Product Description Technical Features Remarks EB-350-series Polyester white Viscosity: 155-175 sec DIN 4, 20°C

Solids content: 67-68.5 % Film thickness: 14 g/m²/dry Drying: 12 min 180 °C

based on polyestergood flexibility BADGE/BPA/MF-NI UV & conv. colours printable

EB 2657-A Interior protective coating/ Exterior protective coating on epoxy resin basis, white

Viscosity: 120 ± 10 s DIN 4mm, 20°CSolids content: 47 ± 2 % Film thickness: 13,0 ± 1,0 g/m²/dry Drying: 10 - 20 s PMT 224-232°C

Coil coatingsuitable for non-pre-treated aluminium

GR-113 Base coat Viscosity: 90 sec DIN 4, 20°C Solids content: 31 % Film thickness: 4 g/m²/dry Drying: 12 min 180 °C

UV & conv. colours printable

K 9007-30 Protective coating on epoxy resin basis, colourless

Viscosity: 200 ± 20 s, DIN 4mm, 20°CSolids content: 37 ± 2 % Film thickness: 3,5 ± 0,5 g/m²/dry Drying: 10 - 20 s PMT 254°C

printable with 2-comp. flexo- and gravure ink

EB-5108-series Stamping enamel Viscosity: 140 sec DIN 4, 20°CSolids content: 60 % Film thickness: 14 g/m²/dry Drying: 12 min 200 °C

based on polyester BADGE-NI

Exterior

Aluminium Caps

Page 34: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 34 of 47

Product Number Product Description Technical Features Remarks K 9873-B Protective coating on epoxy

resin basis, black Viscosity: 170 ± 20 s DIN 4mm, 20°C Solids content: 33 ± 2 % Film thickness: 8,0 ± 1,0 g/m²/dry Drying: 10 - 20 s PMT 254°C

printable with 2-comp. flexo- and gravure inks

S-152-7 Overprint varnish Viscosity: 95 sec DIN 4, 20°C Solids content: 43 % Film thickness: 5 g/m²/dry Drying: 12 min 180 °C

can be processed on the EB-5108-series and on blank tinplate

284/9 BL Overprint varnish Viscosity: 55 sec DIN 4, 20°C Solids content: 46 % Film thickness: 5 g/m²/dry Drying: 12 min 175 °C

based on polyester good flexibility, high gloss suitable for direct metal can be coated wet-in-wet

S-166 Overprint varnish Visosity: 100 sec DIN 4, 20°C Solids content: 40 % Film thickness: 5 g/m²/dry Drying: 12 min 180 °C

special lacquer hot-meltcan be coated wet-in-wet

S-400-2 Overprint varnish Viscosity: 120 sec DIN 4, 20°CSolids content: 51 % Film thickness: 6 g/m²/dry Drying: 12 min 180°C

polyester, BADGE/BPA/MF-NIsuitable for direct on metal good flexibility

GL-79-OVN Gold lacquer Viscosity: 110 sec DIN 4, 20°C Solids content: 41 % Film thickness: 5 g/m²/dry Drying: 12 min 205 °C

universal gold lacquer

Aluminium Caps

Exterior

Page 35: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 35 of 47

Product Number Product Description Technical Features Remarks HLD-79-3-A Adhesive lacquer Viscosity: 95 sec DIN 4, 20°C

Solids content: 42 % Film thickness: 5 g/m²/dry Drying 12 min 200 °C

can be used universally for different PE types, e.g. Svelon™ 520, 521, 529, 596, 931 based on epoxy-phenol, PVC--NI coil drying: 10 - 20 s PMT 270°C

HLD-79-3-R Adhesive lacquer gold Viscosity: 95 sec DIN 4, 20°C Solids content: 42 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

can be used universally for different PE types, e.g. Svelon™ & Oxylon™ compounds, especially: Svelon 586 PVC—NI, based on epoxy-phenol

HLD-79-880 Adhesive lacquer Viscosity: 95 sec DIN 4, 20°C Solids content: 42 % Film thickness: 8 g/m²/dry Drying: 12 min 200 °C

can be used universally for different PE types, e.g. Svelon™ 520 compounds PVC—NI, based on epoxy-phenol coil drying: 10 - 20 s PMT 270°C

HLKU-60-A Adhesive lacquer Viscosity: 95 sec DIN 4, 20°C Solids content: 50 % Film thickness: 9 g/m²/dry Drying: 12 min 205 °C

for PVC plastisols and granulates, e.g. Noviseal™ compounds coil drying: 10 - 20 s PMT 270°C

HLD-300-A Adhesive lacquer Viscosity 100 sec DIN 4, 20°CSolids content: 47 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

PVC, BADGE and BPA-NIsuitable for e.g. Svelon™ 520, 521, 529, 596, 931 Suitable for coil coating

erior Interior

Aluminium Caps

Page 36: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 36 of 47

Product Number Product Description Technical Features Remarks EB-350-series Stamping enamel white or

colours Viscosity: 165sec DIN 4, 20°C Solids content: 50 to 68.5 % Film thickness: 14 g/m²/dry Drying: 12 min 180 °C

based on polyesterExcellent flexibility Large colour selection available on that quality BADGE/BPA/MF-NI UV & conv. colours printable

EB-5023-seriesGR-5023-series

Stamping enamelBase coat

Viscosity: 100-160 sec DIN 4, 20°CSolids content: 30-60 % Film thickness: 4-20 g/m²/dry Drying: 12 min 180 °C

large colour selection availableBADGE/BPA -NI overprint varnish S-152/S-150-D also in no-varnish quality available

VER 156/4 Clear Size Size Coat Viscosity: 45 sec DIN 4, 20°C Solids content: 44 % Film thickness: 3 g/m²/dry Drying: 12 min. 175 °C

based on polyesterexcellent flexibility suitable for direct metal conv colours printable

284/9 BL Overprint varnish Viscosity: 55 sec DIN 4, 20°C Solids content: 46 % Film thickness: 5 g/m²/dry Drying: 12 min. 175 °C

based on polyesterhigher flexibility suitable for direct metal higher gloss, can be coated wet-in-wet mat versions available

S-152-series Overprint varnish Viscosity: 95 sec DIN 4, 20°C Solids content: 40 - 50 % Film thickness: 5 g/m²/dry Drying: 12 min. 180 °C

can be processed on the EB-5023- and GR-5023-series mat versions available

Exterior

Long Caps – Flat Sheet Application

erior

Page 37: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 37 of 47

Product Number Product Description Technical Features Remarks HLKU-60 Adhesive lacquer Viscosity: 95 sec DIN 4, 20°C

Solids content: 50 % Film thickness: 6 g/m²/dry Drying: 12 min 200 °C

organosol

SL-4000-D1 Protective coating Viscosity: 130 sec DIN 4, 20°CSolids content: 53 % Film thickness: 6 g/m²/dry Drying: 12 min 190 °C

based on polyesterfor long caps for EVA compounds

HLD-300-A Adhesive lacquer Viscosity 100 sec DIN 4, 20°CSolids content: 47 % Film thickness: 5 g/m²/dry Drying: 12 min 200 °C

PVC, BADGE and BPA–NI

Interior

Long Caps – Flat Sheet Application

Page 38: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 38 of 47

Product Number Product Description Technical Features Remarks GR-600 Base coat

Side cover Viscosity: 34 sec DIN 4, 20°C Solids content: 38 % Film thickness: 5,5 g/m²/dry Drying: 12 min 150 °C

based on polyesterbase coat for side coating of long caps mat versions available

SL-600 Overprint varnish Side cover

Viscosity: 55 sec DIN 4, 20°C Solids content: 45 % Film thickness: 5,5 g/m²/dry Drying: 12 min 160 °C

overprint varnish for side coating of long caps can be coated wet-in-wet mat versions available

GR-623-series Base coat stamping enamel Side cover

Viscosity: 100-160 sec DIN 4, 20°CSolids content: 30-60 % Film thickness: 4-20 g/m²/dry Drying: 12 min 180 °C

based on polyesterfor side coating large colour selection available

VER 338 Protective coating Side cover

Viscosity: 135 sec DIN 4, 20°CSolids content: 60 % Film thickness: 7 g/m²/dry Drying: 6 min 130 °C + inks stoving

protective coating colourlesshigher resistance against metal-marking Non Varnish version mat versions available

COU 338 Protective coating white Side cover

Viscosity: 160 sec DIN 4, 20°CSolids content: 72 % Film thickness: 15 g/m²/dry Drying: 6 min 130 °C + inks stoving

protective coating whitelarge colour selection available Non Varnish version mat versions available

Long Caps – Side Wall Application

Page 39: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 39 of 47

Product Number Product Description Technical Features Remarks EB-5035-seriesGR-5023-series

Stamping enamelBase coat

Viscosity: 130-160 sec DIN 4, 20°CSolids content: 30-61 % Film thickness: 4-19 g/m²/dry Drying: 12 min 180 °C

based on polyester , BADGE/BPA-NIvery good flexibility large colour selection available U-versions for excellent UV printability

SL-693-Z Protective coating Viscosity: 90 sec DIN 4, 20°C Solids content: 38 % Film thickness: 5 g/m²/dry Drying: 12 min 170 °C

based on epoxy resin combinationstamping free from grease FDA

S-160-Z4 Overprint varnish Viscosity: 75 sec DIN 4, 20°C Solids content: 37 % Film thickness: 4,5 g/m²/dry Drying: 12 min 170 °C

based on epoxyester in combination with EB/GR-5035 very good wet-in-wet properties self-greasing

S-143-225 Overprint varnish Viscosity: 95 sec DIN 4, 20°C Solids content: 35 % Film thickness: 5 g/m²/dry Drying: 12 min 180 °C

based on epoxyester high scratch resistance, e.g. for coffee cans can be coated wet-in-wet self-greasing

S-348-series Effect overprint varnish Viscosity: 100 sec DIN 4, 20°CSolids content: 49 % Film thickness: 6 g/m²/dry Drying: 12 min 180 °C

based on polyester many colour effects available as intermediate coat in a system or as overprint varnish

EF-series Effect coating Viscosity: 110 sec DIN 4, 20°CSolids content: 41 % Film thickness: 6 g/m²/dry Drying: 12 min 200°C

entire series availableas intermediate coat in a system with base or top coat

Exterior/Interior

Decorative Cans / Cigar Boxes

Page 40: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 40 of 47

Product Number Product Description Technical Features Remarks RLCG17115 Interior spray coating gold Viscosity: 130 sec DIN 4, 20°C

Solids content: 35 % Film thickness: 8-10 μm Drying: 7 min 245°C

based on epoxy-phenol resin combinationsuitable up to 66 mm good chemical resistance

RLC 10031/4 Red Mark

Interior spray coating gold Viscosity: 130 sec DIN 4, 20°CSolids content: 44 % Film thickness: 8-10 μm Drying: 7 min 230°C

based on polyester resinBPA-NI, FDA Suitable up to 66 mm good chemical resistance

PEM RLC 15031 (+ Component RLC 16031/6)

Interior spray coating gold Viscosity: 130 sec DIN 4, 20°CSolids content: 43 % Film thickness: 8-10 μm Drying: 7 min 240/250 °C

based on polyester modified resinBPA-NI, suitable up to 66 mm Very good chemical resistance- resist to DME Formulated to replace PAM Varnish

Interior

Monobloc Aerosol Coatings

Page 41: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 41 of 47

Product Number Product Description Technical Features Remarks 72 KM 309/4 BV Clear Base coat Viscosity: 45 sec DIN 6, 20°C

Solids content: 50 % Film thickness: 5 μm Drying: 8 min 130°C

based on polyesterin gold and pearl-essence versions available

RLCG30035/2 WB Clear Base coat Viscosity: 45 sec DIN 6, 20°C Solids content: 40 % Film thickness: 5 μm Drying: 8 min 160°C

based on polyestergold versions available suitable up to 66 mm

72 KM 360/4 BV Exterior coating white Viscosity: 45 sec DIN 6, 20°C Solids content: 66 % Film thickness: 10 μm Drying: 8 min 130°C

based on polyestersuitable up to 66 mm aluminium version available

T1164 SP RLC 15070/2

WB Exterior coating white Viscosity: 85 sec DIN 6, 20°C Solids content: 62 % Film thickness: 12 μm Drying: 8 min 140°C

based on polyesterexcellent flow suitable up to 66 mm

71 KM 295 G Overprint varnish Viscosity: 112 sec DIN 4, 20°C

Solids content: 55 % Film thickness: 5 μm Drying: 8 min 170°C

based on polyesterexcellent abrasion resistance mat versions (B10/15/30 = degree of mattness)

75 KW 373/2 WB Overprint varnish

Viscosity: 90 sec DIN 4, 20°C Solids content: 42 % Film thickness: 5 μm Drying: 6 min 170 °C

based on polyesterexcellent abrasion resistance mat versions (B10/15/30 = degree of mattness) suitable up to 66 mm

Monobloc Aerosol Coatings

Exterior

Page 42: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 42 of 47

Product Number Product Description Technical Features Remarks TGL-57(28505-18014)

Spray coating gold Viscosity: 27 sec DIN 4, 20°C Solids content: 36 % Film thickness: 10 μm Drying: 10 min 250 °C

based on epoxy-phenol resin combinationvery good acid and alkali resistance

TA-322 Tube coating white Viscosity: 165 sec Afnor 6, 20°CSolids content: 71 % Film thickness: 11 μm Drying: 7 min 90-100 °C + 7 min 160°C

Polyester, BADGE/BPA-NI

T1164 SP RLCG30035/E

WB white Viscosity: 45 sec DIN 6, 20°C Solids content: 71 % Film thickness: 12 μm Drying: 8 min 100°C + 7 min 160°C

based on polyesterexcellent flow excellent „crush“ test colours available

Monobloc Tubes

Exterior

Page 43: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 43 of 47

Product Number Product Description Technical Features Remarks 71KL150/4 BT Stamping enamel white Viscosity: 45 sec DIN 6, 20°C

Solids content: 68 % Film thickness: 10 μm Drying: 10 min 130 °C

based on polyesterCoca Cola™ expertise

71KL150/4 BT HV Clear Base coat Viscosity: 80 sec DIN 6, 20°C Solids content: 50 % Film thickness: 5 μm Drying: 8 min 130 °C

based on polyesterCoca Cola™ expertise

71KM295/G Overprint varnish Viscosity: 112 sec DIN 4, 20°CSolids content: 55 % Film thickness: 5 μm Drying: 8 min 170°C

based on polyesterexcellent abrasion resistance Coca Cola™ expertise

75 KW 373/2 WB Overprint varnish

Viscosity: 90 sec DIN 4, 20°C Solids content: 42 % Film thickness: 5 μm Drying: 6 min 170 °C

based on polyesterexcellent abrasion resistance mat versions (B10/15/30 = degree of mattness)

RLC 10031/4 White Mark

Interior spray coating gold Viscosity: 130 sec DIN 4, 20°CSolids content: 44 % Film thickness: 8-10 μm Drying: 7 min 230°C

based on polyester resinBPA-NI Suitable up to 66 mm good chemical resistance

RLC 31053 Interior spray coating Viscosity: 130 sec DIN 4, 20°CSolids content: 44 % Film thickness: 8-10 μm Drying: 7 min 230°C

based on polyester resinColourless BPA-NI Suitable up to 66 mm good chemical resistance

Monobloc Bottles

Exterior/Interior

Page 44: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 44 of 47

Product Number Product Description Technical Features Remarks 72 KM 377 Polyester stamping

enamel white Viscosity: 125 sec AFNOR 6, 20°CSolids content: 73 % Film thickness: 15-20 μm Drying: 15 min 200 °C

roller coating; for tinplate and sheet-ironUV & conv. colours printable suitable for overcoating with overprint varnish, but also as „non-varnish“ white, colours available

RU RLC 110602/3 Polyester stamping enamel red oxide

Viscosity: 105 sec AFNOR 6, 20°CSolids content: 65 % Film thickness: 15-20 μm Drying: 15 min 200 °C

roller coating; for tinplate and sheet-ironvery high abrasion resistance very good covering power

RU RLC 110602/3 Polyester stamping enamel warm red

Viscosity: 105 sec AFNOR 6, 20°CSolids content: 55 % Film thickness: 15-20 μm Drying: 15 min 200 °C

roller coating; for tinplate and sheet-ironvery high abrasion resistance very good covering power

30 KM 372 Alkyd spray coating white Viscosity: 80 sec AFNOR 4, 20°CSolids content: 62 % Film thickness: 15-20 μm Drying: 8 min 140 °C or 8 min 220 °C

Airless and Airmix spraying viscosity 25-30 sec AFNOR 4, 20°C non-yellowing at high stoving temperatures can be stoved at the same time as interior spray coating excellent flexibility and abrasion resistance colours available - 50-62%

Exterior

Drums

Page 45: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 45 of 47

Product Number Product Description Technical Features Remarks 79 KM 351

Polyester spray coating white or colours

Viscosity: 90 sec AFNOR 4, 20°CSolids content: 63 % Film thickness: 15-20 μm Drying: 8 min 220 °C

Airless or Airmix spraying viscosity 25-30 sec AFNOR 4, 20°C non-yellowing at high stoving temperatures can be stoved at the same time as interior spray excellent flexibility and abrasion resistance colours availabe - 50-62%

RLC 08123/7 UV Overprint varnish Viscosity: 30 sec DIN 4, 20°C Solids content: 100 % Film thickness: 5 g/m²/dry Drying: 0,66 J/m²

exterior coating for drumsgood gloss high scratch resistance

RLC 21053 Internal Pigmented Coating

Viscosity: 120 sec AFNOR 6, 20°CSolids content: 58 % Film thickness: 14-16 μm Drying: 12 min 200 °C

Roller Coater application (Spray application possible after appropriate dilution) based on polyester resin BPA-NI, FDA good chemical resistance

Exterior/Interior

Drums

Page 46: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 46 of 47

Copyright 2014 ACTEGA Rhenania GmbH. Alle Rechte vorbehalten. Alle Texte, Bilder, Graphiken, Warenzeichen, Marken und Logos unterliegen dem Urheberrechtsgesetz und anderen Gesetzen zum Schutz geistigen Eigentums. Jede Verwertung außerhalb der rechtlichen Grenzen, insbesondere jede Vervielfältigung, Übersetzung und Veränderung, ist unzulässig. Die Informationen und Angaben auf diesen Seiten oder sonstige Informationen wurden von ACTEGA Rhenania GmbH nach bestem Wissen erstellt. Sie stellen aber keine Garantie oder Zusage betreffend der Beschaffenheit und Eignung für bestimmte Zwecke dar und entbinden den Nutzer nicht von der Durchführung eigener Untersuchungen und Tests. Änderungen bei Produkten, Leistungen, Lieferbedingungen und Preisen bleiben vorbehalten. Copyright 2014 ACTEGA Rhenania GmbH. All Rights Reserved. The texts, images, graphics, trademarks, brands and emblems are all subject to copyright and other intellectual property protection. Any use beyond law, in particular but not limited to duplication, translation and modification is illegal. The information and specification published on these sites are given to the best of ACTEGA Rhenania GmbH knowledge. All this information shall not, however create any guarantee or representation with regard to characteristics and fitness for any particular purpose and shall not relieve the user from undertaking its own investigations and tests. Products, services, delivery terms and prices are subject to alteration without prior notice. Fotorechte/Picture rights Fotos mit freundlicher Genehmigung von G-3Enterprises, USA and DGS, Polen Photos used by courtesy of G-3Enterprises, USA and DGS SA, Poland.

Haftungsausschluss / Disclaimer

Page 47: Rigid Metal Packaging Coatings – Product Catalogue · suitable for direct on metal (alu & tinplate) Two-Piece Food Cans Exterior . Version 3.3, date: 04/23/2014 For further information

Version 3.3, date: 04/23/2014

For further information please contact: ACTEGA Rhenania GmbH, Rhenaniastraße 29-37, D-41516 Grevenbroich T +49 (0) 2181 294-0, [email protected], www.actega.com 47 of 47

Speciality Metal Packaging Coatings External Coatings - base coatings, clear and pigmented - for steril and non-steril - food and non-food application - BPA-NI Internal Coatings - protective coatings, clear, pigmented and gold - adhesion coatings - heatseal lacquers - BPA-NI

Flexible Packaging Coatings External Coatings - Primer - clear & pigmented coatings - for sterilization - food and non-food application - deep drawability - BPA-NI Internal Coatings - protective coatings, clear and pigmented - heatseal lacquers - for sterilization - food and non-food application - deep drawability - BPA-NI

Flexible Packaging Adhesives - Solvent-borne laminating adhesives - Solvent-free laminating adhesives - Pigmented laminating adhesives - BPA-NI - High & medium performance systems. Including renewable raw materials and systems for retort application.

ACTEGA Rhenania Product & Technology Portfolio