Right Rudder Stick Conversions - Hobbico,...
Transcript of Right Rudder Stick Conversions - Hobbico,...
™
© 2012 Hobbico®, Inc. All rights reserved.
To convert your transmitter to right rudder stickcontrol, please select your transmitter’s bookmarkto the left.
Right Rudder StickConversions
™
Mode > PMX1
Press Select
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick Conversion
Press both Mode and Select
NOTE: Trim is still on the left. Cannot deactivate left stick.
Set to ActiveSet to 100%
Slave ONCH4
Press SelectMaster ONCH1
Futaba® 6EX
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionFutaba® 6J
PMX1
To deactivate the left stick (so that rudder is only on the right):
ONMAS CH1SLV CH4SW ON+100%
–100%
ONMAS CH4SLV CH4
SW D/ P.MIX must be in the forward position.PMX2
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionFutaba® 7C
NOTE: Rudder trim is still on left side.
Select P-Mix1 > press wheel
Press and hold Mode/Page > Press Mode again > P-Mix Page
To deactivate the left stick(rudder is only on the right):
P-Mix1 > ONMaster > CH1Slave > CH4Link > OFFSW > ––v Button (cursor down)
Rate +100% +100%
Select P-Mix2 > press wheelP-Mix2 > ONMaster > CH4Slave > CH4SW > ––v Button (cursor down)
Rate –100% –100%
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionFutaba® 8FG
CH 4 change to AILGo to Linkage Menu > Function
NOTE: Trim is now enabled on the right stick and this also disables the left stick and trim.
CRTL should now read J1TRIM should now read T1
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionFutaba® 8U
Select P–Mix1 > ON
Press Mode down Cursor left > Advanced Menu
To deactivate the left stick (so that rudder is only on the right):
AIL > Rud
NOTE: The trim is deactivated on the left side.
Rate +100% +100%
NOTE: The trim is active on the right side.Trim ON
AIL > RudRate –100% –100%Trim ON
Select P–Mix2 > ON
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionFutaba® 9C
Rate –100% –100%NOTE: Trim is active on the right side.
Prog. Mix 1 (Page 2/2)Mode/Page > Basic Menu > Mix (advanced Menu)
To deactivate the left stick(rudder is only on the right):Mix > ON
Master > AileSlave > RuddLink > OFFTrim > ONSwitch > EPosi > Null
Mix > ONMaster > Rudd
ONRudd > Rudd
Slave > RuddLink > OFFTrim > ON
Posi > NullSwitch > C
ONAile > Rudd
Mode/Page Button (Page 1/2)
Rate +100% +100%Rate –100% –100%
Prog. Mix 2 (Page 2/2)
Prog. Mix 2 (Page 2/2)
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionFutaba® 9Z
NOTE: Trim is active on the right side.
Program Mix 1To deactivate the left stick(rudder is only on the right):
Ail: Master
Rud: Slave
Active: Mode (ON)
Press Next
Trim: Active
+100% Rate A
+100% Rate B
Program Mix 2
Rud: MasterRud: Slave
Active: Mode (ON)
Press NextTrim: Active
–100% Rate A–100% Rate B
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionFutaba® 10C
Select Prog. Mix1-8 Select 1 > INH
Press Mode twice > Advanced Menu
Set Rate to +100% +100%
Slave > CH4Master > CH1
MIX > ONTrim > ON
To deactivate the left stick(rudder is only on the right):
Select Prog. Mix1-8 Select 2
Set Rate to –100% –100%
Slave > CH4Master > CH4
MIX > ONTrim > ON
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionFutaba® 12FG
CH4 select RudderLinkage Menu > Function
Activate the Trainer Mode
To deactivate the left stick (so that rudder is only on the right):
Control for CH4 set to J1Trim for CH4 set to T1
NOTE: The trim is active on the right side and deactivated on the left.
Control ––Trim ––
CH2 select Aux 1Linkage Menu > Function
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionFutaba® 12Z
CH4 change to Aileron
Linkage Menu
NOTE: Trim is now on the right side.
Activate the trainer setting.
CH1 change to Aux 1
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionFutaba® 14MZ
CH4 select Rudder
Linkage Menu > Function
To deactivate the left stick (so that rudder is only on the right):
Control for CH4 set to J1
NOTE: The trim is active on the right side.
Trim for CH4 set to T1
NOTE: The trim is deactivated on the left side.
CH2 select Aux 1
Linkage Menu > Function
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionHitec® Aurora 9
System Menu
To deactivate the left stick (so that rudder is only on the right):
Channel FunctionCH4 Press Rudd then select Aile
NOTE: The trim is active on the right side.
CH4 Press Aile then select Aux1Channel Function
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionHitec® Optic 6
To deactivate the left stick (so that rudder is only on the right):
Ail D/R SW3 must be in the down position.PMix1Mas > 1Slv > 4+100%
PMix2Mas > 4Slv > 4–100%
Elev/Rudd D/R SW1 must be in the down position.
NOTE: The trim is on the left side
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionJR® 10X
To deactivate the left stick (so that rudder is only on the right):
Enter > Input NO.51 Mix 1 > Aile > RuddTrim > ON–100%–100%
Enter > Input NO.51 Mix 2 > Rudd > RuddTrim > ON–100%–100%
NOTE: The trim is now on the right side. However, the left stick cannot be disabled 100%.
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionJR® X9303
To deactivate the left stick (so that rudder is only on the right):
List Button > Prog Mix 2 > Activate > Rudd > RuddPoint –0 +100Point –3 –0Point –6 –100
NOTE: The left stick cannot be disabled 100%.
List Button > Prog Mix 1 > Activate > Aile > RuddPoint –0 –100Point –3 –0Point –6 +100
NOTE: The trim is still active on the left side as well.
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionJR® XP6102
Scroll to Mix 1 > Ail > Rud
Press Down and Select for Access
To deactivate the left stick (so that rudder is only on the right):
NOTE: Trim is still on the left side.
+100% +100%Always ON
–100% –100%Always ON
Scroll to Mix 2 > Rud > Rud
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionSpektrum® DX6
Mix A–R
Enter (Push both buttons forward)
NOTE: Trim is still on the left side (cannot disable).
+125%
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionSpektrum® DX6i
To deactivate the left stick (so that rudder is only on the right):
Go to Set Up List > Adjust List > Mix 1ActiveAile > Rud ActRate adjust to desired travelTrim > Act (Aile trim works for the Rudd)
ActiveRudd > RuddRate L 100% R 100%
Go to Set Up List > Adjust List > Mix 2
NOTE: The trim is still active on the left side as well.
™
© 2012 Hobbico®, Inc. All rights reserved.
Right Rudder Stick ConversionSpektrum® DX7
Rate +125%Rate +125%SW: ON
Rate –100%Rate –100%SW: ON
Prog. Mix 1 > Aile > Rudd ON
Access (Press Scroll/Down with Select at the same time)
To deactivate the left stick (so that rudder is only on the right):
NOTE: Trim is still on the left side.
Prog. Mix 2 > Rudd > Rudd ON
™
© 2012 Hobbico®, Inc. All rights reserved.
Futaba® 4VF JR® 421EX
Futaba 4YBF
Futaba 5U
Futaba 6H
Futaba 6DA
Futaba 6YG
Futaba 6YF
Futaba 4YF
Futaba 7NFK
Radios that cannotbe converted toRight Rudder Stick: