RIG 8 SPECIFICATIONS
Transcript of RIG 8 SPECIFICATIONS
RIG 8 SPECIFICATIONS August 2018
General: Total Measured Depth 4,200 m (Telescopic Double), Racking Capacity: 4,200 m
K.B. to Ground: 5.36 m Bottom of table Beam to Ground: 4.12 m Approx. Loads: Rig: 13 Loads, Drill Pipe and Drill Collars: 6 Loads (Pipe Tubs)
Boiler: 1 Load, Top Drive 1 Load
EQUIPMENT Drawworks: T.S.M. 7000 Auxiliary Brake: 324 Eaton Rig Power and Distribution: Detroit Diesel Series 60 14L c/w Allison 6061 Transmission
Max. Power: 447 kW Mast: Cassady 32 m Telescopic Double Max. Hook Load: 155,000 daN Substructure: Cassady One Piece Center Load
(Self-leveling) 14.44 m x 4.41 m x 4.67 m (4.82 m w/pontoons) Max. Pipe Setback: 133,000 daN Crown Block: Cassady T.S.M.. 4 x 36, 1 x 42 Block/Hook: National 435 G 175, Max. Load: 155,750 daN Top Drive: FDS 250T, Rating: 222,500 daN Drilling Line: 28.5 mm x 1,067 m Rotary Table: National C-175-S, 444.5 mm Max. Load: 133,000 daN Rotary Torque: Lesko 1810 Series Base Mount Roto-Torque Rotary Brake: Fawick 18” Air Applied Mud Pumps: 2 x Continental Emsco F-1000, 140 mm x 254 mm Triplexes
Input Power: Detroit Diesel Series 2000 Liner Size: 140 mm, Max. Allowable S.P.M.: 140
Max. Allowable Operating Pressure: 80% Liner Rating
Circulating System: Rated to 35,000 kPa Mud Tanks: 1 Tank with 4 Compartments, Active Volume: 65.18 m3
Trip Tank: 6.61 m3 Pill Tank: 6.61 m3
2 - Go Getter mud hoppers 4 – 1,700 kPa low pressure mud guns
3 - Eurodrive 25.6 kW agitators
2 - 30 kW Mission Magnum transfer pumps
www.beaverdrilling.com Operations: 2003 - 76 Avenue, Edmonton, AB T6P 1P6 Corporate: 910, 500 - 4 Avenue S.W., Calgary, AB T2P 2V6 Phone 780.436.3650 Fax 780.436.4640 Phone 403.265.6472
…...continued Rig 8 Specifications
Shale Shakers: 2 x DFTS High-G Linear Motion
Output: 2.5 m3/min each Accumulator: Oilco 5 Function PLC Touchscreen Capacity: 400 L, Pressure: 21,000 kPa Choke Manifold: Tartan 3 1/8” 5000# NACE
Gut Line: 76 mm, Wing Lines: 76 mm Manual Chokes: 2 76 mm Willis M3F 3030 Mud Gas Separator: Size: 762 mm x 3 m Nace, BOP Class IV
Inlet Line: 102 mm, Outlet: 203 mm Valves: HCR Valve: National Rating 21,000 kPa
Upper Kelly Cock: Griffith Rating 21,000 kPa Stabbing Valve: Griffith Rating 21,000 kPa B.O.P.: 279 mm x 21,000 kPa Nace, BOP Class IV
Annular: Shaffer Pipe Ram: Shaffer LWS Single
Blind Ram: Shaffer LWS Single, Ram Carriers: Type 70 Fluid Containment: Katch Kan/Kelly Kan mud containment system Drill Pipe: As per bid Drill Collars: 21 – 152 mm x 57 mm x 208 m x 4 H-90
2 – 228 mm x 71 mm x 19 m x 7 H-90 Tankage: Water: 87 m3 Fuel: 22,000 L Main Light Plant: Detroit Diesel Series 60 350 kW 220/440 Standby Light Plant: Detroit Diesel Series 60 350 kW 220/440 Boiler: Liberty 75 kW Instrumentation: Electronic Drilling Recorder: Pason
Survey Instrument: Taylor Pipe Handler: Alco “Make + Break” Iron Roughneck c/w hydraulic power slips Catwalk: Cassady Hydraulic Skate Accommodation: Available Upon Request
www.beaverdrilling.com Operations: 2003 - 76 Avenue, Edmonton, AB T6P 1P6 Corporate: 910, 500 - 4 Avenue S.W., Calgary, AB T2P 2V6 Phone 780.436.3650 Fax 780.436.4640 Phone 403.265.6472