RGUKT, Basar, Nirmal Dist.,Telangana – 504107 VOLUME – III...

TENDER No: SRO/CON/ETS/017 dated 30.01.2019

FOR

e-Tender for Construction of 1000Sft. Apartment Blocks-2 No’s, 800Sft.

Apartment Blocks-1 No’s, Duplex House and Storm water drains at IIIT Campus, RGUKT, Basar, Nirmal Dist.,Telangana – 504107

VOLUME – III

QUOTING SHEET &

PRICED BID

ENGINEERING PROJECTS (INDIA) LTD(A Government of India Enterprise)

Signature of the bidder with seal Page 1 of 1 EPI

In figures In words In

figures In words

1 Construction of 1000Sft. Apartment Blocks-2 No’s, 800Sft. Apartment Blocks-1 No’s, Duplex House and Storm water drains at IIIT Campus including civil, Electrical and PHE works

12.00 %

In Figures

RupeesIn Words

Rs.21,01,93,573.00 (Rupees Twenty One Crores OneLakhs Ninety Three Thousand FiveHundred and Seventy Three only)

SEAL & SIGNATURE OF BIDDER

Note : Price Quoted by the bidders are including of GST, Seigniorage charges and labour cess (1% of value of work done). GST as applicable shall be released on submission of documentary evidence of payment made towards GST.

Name of the Project:-e-Tender for Construction of 1000Sft. Apartment Blocks-2 No’s, 800Sft. Apartment Blocks-1 No’s, Duplex House and Storm water drains at IIIT Campus, RGUKT, Basar, Nirmal Dist.,Telangana – 504107

NIT NO.: SRO/CON/ETS/017 DATED 30.01.2019QUOTING SHEET

SL. No. DESCRIPTIONEstimated Cost ( inclusive of all taxes and duties, including GST) (IN

Rs)

BIDDER'S PRICE AMOUNT IN Rs After adding percentage above

or at par or below% QUOTE ABOVE / AT PAR / BELOW

BIDDER'S FINANCIAL OFFER :

GST considered in above mentioned estimate cost =

ENGINEERING PROJECTS (INDIA) LTD

(A Government of India Enterprise)

1

Clearing and grubbing of land including uprooting wild vegetation,

grass, bushes, shrubs, saplings and trees of girth upto 300mm,

removal of stumps of such trees cut and disposal of unserviceable

materials and stacking of serviceable material to be used or

auctioned, upto a lead of 1000m including removal and disposal of

top organic soil not exceeding 150mm in thickness as per

technical specification Clause 201 MORD/MORTH

Sqm 7072.00 7.13 50,423.36

2

Earth work excavation for foundations and depositing on bank

for all lifts with an initial lead of 10m including all operational

,incidental, labour charges such as shoring, sheeting ,planking

,strutting etc complete for finished item. Including seignorage

excluding dewatering charges etc. as per SS-20B (APSS 308)

Cum 12006.05 95.90 11,51,380.20

3

Demolition including stacking of serviceable materials and

disposal of unserviceable materials within 100 metres lead-R.C.C

work

Cum 195.00 1982.90 3,86,665.50

4

Bored cast-in-situ M 25 grade Design mix RCC pile 600mm dia

using hydraulic piling rig with power unit and complete accessories

including shifting rig from from one bore location to another ; hire

and running charges of Bentonite pump , light crane for lowering

reinforcement cage ; loader 1 cum bucket capacity ; tipper 5.50

cum capacity for disposal of muck from pile bore hole to a

distance of 1 KM ; cost of Bentonite solution and temporary

casing of appropriate length for setting and removal of the same ;

including filling the bore with M 25 Design Mix ( mixing concrete in

Mechanical Weigh Batching units up to 15 cum/hr capacity ) using

20mm size (SS5) hard granite machine crushed graded metal

(Coarse aggregate) from approved quarry, using a minimum

quantity of 380 kgs. of cement per 1 cum of concrete including

cost and conveyance of all materials like cement, fine aggregate

(Sand), coarse aggregate, water etc., to site and cost of all

materials ,laying concrete, curing ,all incidental charges : labour

charges etc. complete but excluding cost of seigniorage charges,

reinforcement and fabrication charges as per drawing and

technical specifications as per IS - 2911 ( Part-I Section II ) -1979

for finished item of work. ( Length of Pile for payment shall be

measured up to bottom of Pile cap )

0.00

a)600mm dia RMT 1075.87 3862.69 41,55,732.98

b)450mm dia RMT 389.04 3120.67 12,14,065.46

5

Filling with Sand, including supply and delivery of good gravel for

filling, including cost of gravel, seinourage charges and

conveyance to site, filling charges, watering, tamping and

rammming and all labour charges and operational charges

complete as directed by the Departmental officers.

Cum 2194.66 1164.07 25,54,737.87

6

Plain Cement concrete in (1:4:8) prop. Using 40 mm HBG

metal including cost and conveyance of materials to site including

seignorage fee, Machine mixing, concrete laying tamping,

vibrating, watering curing and all labour charges, hire and

operational charges of machinery, water lead charges and

including bailing of water.etc. complete for finished item of work.

Cum 826.14 3973.22 32,82,435.97

Name of the Project:-e-Tender for Construction of 1000Sft. Apartment Blocks-2 No’s, 800Sft. Apartment Blocks-1 No’s, Duplex House and

Storm water drains at IIIT Campus, RGUKT, Basar, Nirmal Dist.,Telangana – 504107

Priced Bill Of Quantities

NIT NO.: SRO/CON/ETS/017 DATED 30.01.2019

Sl. No Description of Work UOM QtyRate

(Rs)

Amount

(Rs.)









(Rs)

Amount

(Rs.)

7

Supply and placing of the Ready Mix (RMC) Design Mix

Concrete grade M25 as per IS 4926-2003 with minimum cement

content as per IS code 456-2000 using 20 mm graded metal, from

standard suppliers approved by the department including

centering,shuttering,pumping, laying concrete, vibrating, curing

etc. complete but excluding cots of steel and its fabrication

charges for finished item of work. Pilecap

Cum 935.60 7011.62 65,60,071.67

8

Construction of RR Masonary in C.M (1:6) prop. Using hard granite

stone including cost and conveyance of all materials like cement,

sand, water, Granite stone etc. including cost of seigniorage

charges on all materials, all taxes including labour for cutting

stones to required size and shape, mixing of cement mortar

construction, Scaffolding charges etc. complete for finished item of

work.

Cum 154.50 3928.87 6,07,010.42

9

Filling with Excavated Earth (Ordinary Soil) including cost and

conveyance of all labour charges etc., complete for finished item

of work.

Cum 2385.80 33.43 79,757.29

10

Filling with Gravel, including supply and delivery of good gravel

for filling, including cost of gravel, seinourage charges and

conveyance to site, filling charges, watering, tamping and

rammming and all labour charges and operational charges

complete as directed by the Departmental officers.

Cum 8213.03 461.22 37,88,013.70

11

Removal of unsuitable / Unserviceable soil including excavation,

loading and disposal upto 2000 m lead but excluding compaction

ground supporting embankment subgrade replacement by suitable

soil, which shall be paid separately as per Clause 303.5.2 as per

Technical Specification Clause 302.3.11 MORD / 301 MORTH

Cum 1065.00 44.90 47,818.50

12




standard suppliers approved by the department including

centering, shuttering,pumping, laying concrete, vibrating, curing


charges, for finished item of work.:Plinthbeam

Cum 92.27 9227.11 8,51,385.44

13

Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-

constructional chemical treatment measures) along the internal &

external vertical faces of the columns, plinth beams, basement

and top surface of the basement filling below flooring bed as per

the specified procedure conforming to IS 6315 (Part-2) 2001 and

other relevant approved specification duly using Chlorpyriphos/

Lindane emulsifiable concentrate 20% with 1% concentration @

7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the

horizontal surface of the substructure to a depth of 500 mm around

columns & 300 mm deep around plinth beams, basements & floor

filling area including excavation channel along the wall & rodding

etc & cost & conveyance of all materials to the site, cost of labour

for spraying, rodding etc complete for finished item of work as per

the approval of the Engineer-in-Charge

Sqm 2263.07 289.00 6,54,027.23









(Rs)

Amount

(Rs.)

14




standard suppliers approved by the department including ,

centering, shuttering, pumping, laying concrete, vibrating, curing


charges for finished item of work.

a Columns : 0.00

1)ground floor : Cum 72.80 9056.92 6,59,343.78

2)First floor : Cum 71.22 9389.69 6,68,733.72

3)Second floor : Cum 65.57 9722.46 6,37,501.70

4)Third floor : Cum 65.57 10055.23 6,59,321.43

5)Fourth floor : Cum 65.57 10388.00 6,81,141.16

6)Fifth floor : Cum 65.57 10720.77 7,02,960.89

7)Terrace Floor Cum 18.66 11053.54 2,06,259.06

b Beams 0.00

1)ground floor : Cum 110.87 9585.49 10,62,743.28

2)First floor : Cum 111.17 9815.81 10,91,223.60

3)Second floor : Cum 101.92 10046.13 10,23,901.57

4)Third floor : Cum 101.92 10277.58 10,47,490.95

5)Fourth floor : Cum 101.92 10507.90 10,70,965.17

6)Fifth floor : Cum 101.92 10738.22 10,94,439.38

7)Terrace Floor Cum 26.23 10968.54 2,87,704.80

c 1)Grade slab/ Plinth Protection slab (100mm thickness) Sqm 1179.62 565.90 6,67,546.96

2)Grade slab(200mm thickness) Sqm 3754.80 1081.69 40,61,529.61

d slab-125mm thickness 0.00

1)ground floor : Sqm 962.22 1145.78 11,02,492.43

2)First floor : Sqm 925.62 1172.73 10,85,502.34

3)Second floor : Sqm 825.37 1198.53 9,89,230.71

4)Third floor : Sqm 825.37 1225.48 10,11,474.43

5)Fourth floor : Sqm 825.37 1251.28 10,32,768.97

6)Fifth floor : Sqm 869.05 1278.23 11,10,845.78

7)Terrace Floor Sqm 53.56 1304.03 69,843.85

e slab-150mm thickness 0.00

1)ground floor : Sqm 56.38 1274.73 71,869.28

2)First floor : Sqm 56.16 1302.29 73,136.61

3)Second floor : Sqm 56.16 1328.71 74,620.35

4)Third floor : Sqm 56.16 1356.27 76,168.12

5)Fourth floor : Sqm 56.16 1382.70 77,652.43

6)Fifth floor : Sqm 11.08 1410.26 15,625.68

7)Terrace Floor Sqm 108.12 1436.68 1,55,333.84

f Slab 175mm thick ground floor Sqm 20.25 1425.47 28,865.77

g 8)Slab 200mm thick Terrace floor Sqm 31.24 1721.30 53,773.41

h 1)R.C.C Wall(100mm thick)- Ground Floor Sqm 4172.00 3674.29 1,53,29,137.88

2)R.C.C Wall(230mm thick)- Ground Floor Sqm 38.85 4344.82 1,68,796.26

3)R.C.C Wall(200mm thick)- Second Floor Sqm 36.50 4557.84 1,66,361.16

4)R.C.C Wall(200mm thick)- Terrace Floor(Sixth Floor) Sqm 103.15 5292.22 5,45,892.49

i Stair Case

1)ground floor : Cum 10.45 9585.49 1,00,168.37

2)First floor : Cum 9.37 9815.81 91,974.14

3)Second floor : Cum 7.87 10046.13 79,063.04

4)Third floor : Cum 7.87 10277.58 80,884.55

5)Fourth floor : Cum 7.87 10507.90 82,697.17

6)Fifth floor : Cum 7.87 10738.22 84,509.79

j Lintels : 0.00 -

1)ground floor : Cum 12.71 9287.56 1,18,044.89

2)First floor : Cum 26.50 9549.89 2,53,072.09

3)Second floor : Cum 25.15 9812.22 2,46,777.33

4)Third floor : Cum 25.15 10073.41 2,53,346.26

5)Fourth floor : Cum 25.15 10335.74 2,59,943.86

6)Fifth floor : Cum 25.15 10598.06 2,66,541.21

7)Terrace Floor Cum 6.95 10860.39 75,479.71









(Rs)

Amount

(Rs.)

k Sills/Chajja/Sunshade: 100mm thick 0.00 -

1)ground floor : Sqm 54.00 1048.65 56,627.10

2)First floor : Sqm 61.80 1078.38 66,643.88

3)Second floor : Sqm 60.50 1106.98 66,972.29

4)Third floor : Sqm 60.50 1136.72 68,771.56

5)Fourth floor : Sqm 60.50 1165.31 70,501.26

6)Fifth floor : Sqm 60.50 1195.05 72,300.53

7)Terrace Floor Sqm 13.00 1224.78 15,922.14

l Precast slabs-25mm thick 0.00 -

1)First floor : Sqm 170.18 654.47 1,11,377.70

2)Second floor : Sqm 160.18 677.81 1,08,571.61

3)Third floor : Sqm 145.18 702.28 1,01,957.01

4)Fourth floor : Sqm 145.18 725.62 1,05,345.51

5)Fifth floor : Sqm 145.18 750.10 1,08,899.52

15

FLYASH Brick masonry 29x22.5x14 cm for panel walls in

superstructure with CM (1:6) prop: (Cement : Screened sand)

from approved source having minimum crushing strength of 50

Kg/Sqcm. including cost and conveyance of all materials like

cement, screened sand, bricks, water etc., to site, including sales

& other taxes on all materials and such as labour charges, like

mixing cement mortar, scaffolding charges, constructing masonry,

lift charges, curing, etc.,and overheads & contractors profit

complete for finished item of work. (APSS No. 501 & 504).

0.00 -

a)ground floor : Cum 247.42 6144.12 15,20,178.17

b)First floor : Cum 244.19 6503.25 15,88,028.62

c)Second floor : Cum 226.72 6862.36 15,55,834.26

d)Third floor : Cum 215.65 7221.48 15,57,312.16

e)Fourth floor : Cum 215.65 7580.60 16,34,756.39

f)Fifth floor : Cum 215.65 7939.72 17,12,200.62

g)Terrace Floor Cum 137.17 8298.79 11,38,345.02

h)Ground floor upto 1.2M height Cum 480.00 5709.86 27,40,732.80

16

Reinforced FLYASH Brick Masonry 29x10x14cm for partition walls

(10.0 cm thick) in CM (1:6) prop. (Cement : Screened sand) from

approved source having minimum crushing strength of 50

Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third

layer with free ends of the reinforcement pegged into mortar joints

of main brick walls where applicable including cost and

conveyance of all materials like cement, steel, sand, bricks, water

etc., to site, including sales & other taxes on all materials, all

operational, incidental charges such as labour charges for mixing

cement mortar, scaffolding charges, constructing masonry, lift

charges, curing, etc., and overheads & contractors profit but

excluding cost of steel and its fabrication charges complete for

finished item of work. (APSS No. of 501 & 509)

a)First floor : Ten Sqm 84.95 7536.26 6,40,205.29

b)Second floor : Ten Sqm 79.61 8093.54 6,44,326.72

c)Third floor : Ten Sqm 73.96 8650.82 6,39,814.65

d)Fourth floor : Ten Sqm 73.96 9208.10 6,81,031.08

e)Fifth floor : Ten Sqm 73.96 9765.38 7,22,247.50

17

Providing & fixing of Rabbit wire mesh & nominal reinforcement

such as nails etc., as directed by Engineer-in-charge with dubara

sponge finishing, including cost & conveyance of all materials to

site, seigniorage charges, sales & other taxes on all materials,

operational & incidental, cost and conveyance of cement, wire

mesh, water to work site, centering, scaffolding and form work, lift

charges etc., complete for finished items of work , for finished item

of work. (APSS No.403 & 903)

Sqm 122.66 469.19 57,550.85









(Rs)

Amount

(Rs.)

18

20mm thick plastering to masonry walls to external side with

16mm in C.M(1:6)prop.as Ist coat and 4mm in C.M(1:4)prop. as II

nd coat with dubara sponge finishing and curing etc., seignourage

and all operational incidental labour charges such as scaffolding

mixing mortar,curing etc.complete as per specification and

drawings for finished item of work.

-

a)Ground floor ; Sqm 1427.47 358.57 5,11,847.92

b)First floor : Sqm 1623.54 390.47 6,33,943.66

c)Second floor : Sqm 1738.20 422.36 7,34,146.15

d)Third floor : Sqm 1497.85 454.27 6,80,428.32

e)Fourth floor : Sqm 1497.85 486.16 7,28,194.76

f)Fifth floor : Sqm 1497.85 518.06 7,75,976.17

g)Terrace Floor Sqm 1728.64 549.96 9,50,682.85

h)Ground floor upto 1.2M height Sqm 0.00 362.40

19

Plastering with CM (1:5), 12 mm thick inside including cost and

conveyance of all materials and water to work site seigniorage and

all operational incidental, labour charges such as scaffolding,

mixing mortar lift charges curing etc., complete for finished item of

work.

-

a)Ground floor : Sqm 1834.19 134.58 2,46,845.29

b)First floor : Sqm 3438.87 162.76 5,59,710.48


d)Third floor : Sqm 3097.62 226.56 7,01,796.79


f)Fifth floor : Sqm 3097.62 290.35 8,99,393.97

g)Terrace Floor Sqm 309.68 322.26 99,797.48

20

Plastering with CM (1:5), 12 mm thick inside including cost and

conveyance of all materials and water to work site seigniorage and

all operational incidental, labour charges such as scaffolding,

mixing mortar lift charges curing etc., complete for finished item of

work. (for Ceiling)

-


b)First floor : Sqm 960.00 173.00 1,66,080.00


d)Third floor : Sqm 869.05 243.80 2,11,874.39


f)Fifth floor : Sqm 869.05 314.59 2,73,394.44

g)Terrace Floor Sqm 143.94 349.78 50,347.33

21

Painting to walls with 2 coats (all colourse of acrylic exterior

emulsion paint or other equal and approved water proof cement

paint all to give an even shade after thourughly brushing the

surface to remove all dirt and remains of loose powdered

materials, complete for finished item of work as per SS 912 for

external walls. for all floors

Sqm 12370.74 184.58 22,83,391.19

22

Providing and applying Wall Putty to use surface (white / off

white) - of average 1.5 to 2 mm thickness over plastered surface to

prepare the surface even and smooth after thoroughly brushing the

surface to remove all dirt and remains of loose powdered

materials, applying emery paper, Sand the surface, clean & wipe

off loose dust, applying knifing paste filler by putty knife / muslin

pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper

for the surface preparation and applying two coats of Interior

Acrylic emulsion over primer over putty including cost,scaffolding

and conveyance of all materials to work site and all operational,

incidental, labour charges, over heads and contractors profit etc.,

complete for finished item of work in all floors for Internal walls For

all floors

Sqm 22800.98 304.02 69,31,953.94

PUtty- J.K.Wall Putty(White cement based)

Paints:Asian, Berger, Nerolac









(Rs)

Amount

(Rs.)

23

White washing two coats with whiting of approved quality to give

an even shade after thoroughly brushing the surface to remove all

dirt and remains of loose powdered materials including cost and

conveyance of all materials, labour charges and incidental such as

scaffolding, lift charges etc., complete for finished item of work (to

ceilling) for all floors

Sqm 5250.49 34.47 1,80,984.39

24

Providing impervious coat to exposed RCC roof slab surface

with CM(1:3), 20mm thick with 1kg of water proof compound per

bag of cement laid over roof when it is green including cost of all

materials, seigniorage charges, excluding conveyance charges of

materials and including all operational, incidental and labour

charges for mixing mortar, laying, rendering smooth and thread

lining, curing, rounding off junctions of wall and slab etc,, complete

for finished item of work

-

a)First floor : Sqm 287.50 416.16 1,19,646.00

b)Second floor: Sqm 129.25 443.93 57,377.95

c)Third floor: Sqm 129.25 471.71 60,968.52

d)Fourth floor: Sqm 129.25 499.48 64,557.79

e)Fifth floor: Sqm 129.25 527.26 68,148.36

f)Terrace Floor Sqm 895.65 555.03 4,97,112.62

25

Providing and Fixing Pre painted Steel Sliding Windows / Doors - 3

track sliding window /doors shutter with mesh shutter – (2 - glass

shutters and 1 - mesh shutter) fabricated from Roll formed

sections made of galvanized Steel colour coated/powder coated

(Base Steel as per IS 513 ‘D’ quality,

galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total

coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7

microns thick, finish painted with a polyester paint of 12-16

microns thick and back coated with Alkyd backer of 5-7 microns or

powder coated with pure polyester powder up to 50- 60 microns

thick. Section for external frame should be of 44 x 107mm .Section

for glass shutter and mesh shutter in case of door should be of 35

x 67 mm Section for euro groove should be 25 x 31mm

(Aluminium/ Plastic) (in case of window sections should be 35 x 49

mm and 25 x 24 mm and 30 x 41 mm) and Lap Strip should be of

39 x 41mm (30 x 41 mm & Touch lock for window ) (Aluminium/

Plastic.

The doors/ windows should be panelled with 5mm thick plain float

glass. Corner bracket for internal and external frame made of

glass filled nylon. Gaskets are to be made of Ethyl Propylene

Diamine Monomer (EPDM).The sections are to be cut to length,

joined and assembled by means of corner

bracket. The above frames should be fixed to the

concrete/masonry walls by means of self expanding

brackets & screws including 10mm square guard

bars with 6” pitch (152.4mm) (in case of windows

only) and all Taxes complete for finished item of

work.

W1 Sqm 599.95 7726.96 46,35,751.02

Windows and Ventilators: NCL-Seccolor, NCL-Bison, NCL-Win tech









(Rs)

Amount

(Rs.)

26

Providing and fixing of louvered Ventilators made of

pre-painted steel as per IS 513 of 0.80 mm thick

galvanized as per IS 277 with a polyester paint with

and fitted with 4 mm thick plain float glass including

fixing the frames in concrete/masonry wall by means

of self expanding screws, etc., complete for finished

item of work for (i) Single fixed Louvers Ventilator

size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame

box section size of 80 x 45mm and (ii) Double fixed

Louvers ventilator Size of 4’ 0” x 2’ 0” (1219.2mm x

609.6mm) outer frame box section size of 80 x

45mm, vertical mullion section size of 80 x 60 mm

and (iii) Double fixed Louvers Ventilator size of 4’0”

x 3’0” (1219.2mm x 914.4mm) outer frame box

section size of 80 x 45mm , Vertical mullion section

size of 80 x 60 mm

-

V1 Sqm 143.97 4303.74 6,19,608.90

27

Flooring with soluble salt porcelain vitrified tiles screen

printed and polished of size 600 x 600 mm and thickness

between 8-10 mm 1st quality conforming to IS:13711,

IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in

all shades and designs set over base coat of CM (1:8) over

already laid CC bed / RCC Roof Slab, including neat cement slurry

of honey like consistency spread @ 3.3 kgs per sqm. & Jointed

with neat cement to full depth including cost of all materials like

cement, sand, and water and flooring stones etc., complete,

including seigniorage charges, labour charges for dressing of

flooring stones etc., complete for finished item of work, but

excluding the cost of conveyance of all materials.

-


b)First floor : Sqm 964.07 1052.78 10,14,953.61


d)Third floor : Sqm 868.42 1114.65 9,67,984.35


f)Fifth floor : Sqm 868.42 1176.53 10,21,722.18

28

Granite stone tiles16-18 mm thick (mirror polished of all

shades) -other than black and regular colours as approved by

engineer- in - charge of length not less than 2.43 ts set over base

coat of cement mortor (1:8)

-


b)First floor : Sqm 96.80 3981.72 3,85,430.50


d)Third floor : Sqm 96.80 4096.13 3,96,505.38


f)Fifth floor : Sqm 96.80 4210.54 4,07,580.27

Tiles:Kajaria, H & R Johnson,SOMANY









(Rs)

Amount

(Rs.)

29

Providing skirting to internal walls to 15 cm height/risers of

steps with soluble salt porcelain vitrified tiles screenprinted

and polished of size 600 x 600 mm and thickness between 8-

10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630

(Parts 1 to 15) of any colour and finish in all shades and

designs set over base coat of CM (1:5) 12 mm thick with cement

slurry of honey like consistency spread at t he rate of 3.30 kgs per

sqm and jointed with white cement paste mixed with pigment of

matching shade to full depth, including cost of all materials like

Shahabad stone, cement, sand and water etc., complete including

seigniorage charges, etc., complete for finished item of work, but

excluding the cost of conveyance of all materials

a)First floor Sqm 155.10 1060.24 1,64,443.22

b)Second Floor Sqm 153.77 1091.18 1,67,790.75

c)Third Floor Sqm 141.45 1122.12 1,58,723.87

d)Fourth Floor Sqm 141.45 1153.06 1,63,100.34

e)Fifth Floor Sqm 141.45 1184.00 1,67,476.80

30

Flooring with Non-skid red or white full body Ceramic floor

tiles of size 300 x 300 mm and thickness between 7-8 mm 1st

quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to

15) of any colour and finish in all shades and designs set over

base coat of cement mortar (1:8), 12 mm thick over CC bed

already laid or RCC roof slab, including neat cement slurry of

honey like consistency spread @ 3.3.kgs per sqm & jointed neatly

with white cement paste to full depth mixed with pigment of

matching shade, including cost and conveyance of all materials

like cement, sand water and tiles etc., complete, including

seigniorage charges, etc., complete for finished item of work.

-

a)First floor Sqm 129.75 890.52 1,15,544.97


c)Third Floor Sqm 117.25 952.40 1,11,668.90


e)Fifth Floor Sqm 117.25 1014.28 1,18,924.33

31

Providing and laying cinder concrete cinder mix (1; 15) prop. Using

12.5mm nominal size cinder laid in layers and completed as

directed for filling sunken floors including cost and conveyance of

all meterials, water to work site, complete for finished item of work.

Cum 141.72 2329.39 3,30,121.15

32

Dadooing to walls with first quality glazed red or white full

body ceramic wall tiles of size 200 x 300 mm thickness 6 mm

1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1

to 15) of any colour and finish in all shades and designs set

over base coat of C.M(1:3)prop. 12mm thick and neat grey cement

slurryof honey like consistency spread at the rate of 3.3Kg of

cement per sqm and jointed with neat white cement paste at 0.20

kg per sqm mixed with pigment of matching shade to match the

shade of tiles including cost and conveyance of all materials labour

charges,water to work site,seigniorage and all operational

.incidental ,mixing mortor ,fixing in position ,lift charges,curing,

VAT etc., complete as per SS or as directed by the departmental

authorities for finished item of work.

-

a)First floor Sqm 455.94 894.95 4,08,043.50









(Rs)

Amount

(Rs.)


c)Third Floor Sqm 427.44 910.44 3,89,158.47


e)Fifth Floor Sqm 427.44 925.94 3,95,783.79

33

Supplying and fixing of stainless steel railing of grade SS 304

of one meter height consisting of vertical posts 50 mm dia-6 no's

for every 4.6Meters embedbed in treads and landing of staircase,

hand rail 50 mm dia pipe with 2 Nos intermidiate 25 mm dia pipes

parallel to railing including 50gms of SScaps fixing, welding to

balusters as per design with hand brushing, including cost and

coveyance of materials labour charges etc complete for finished

item of work.

RMT 160.84 3712.62 5,97,137.80

34

Providing Thermo Mechanically Treated (TMT) (Fe 500 grade

as per IS 1786-1979) of different diameters for RCC works ,

including labour charges for straightening, cutting, bending to

required sizes and shapes, placing in position with cover blocks of

approved materials and size and tying and lap-splicing with binding

wire of 18 SWG, forming grills for reinforcement work as per

approved designs and drawings, including cost and conveyance of

steel bars, including all wastages such as overlaps, couplings,

chairs, spacer bars including cost and conveyance of binding wire,

cover blocks and all incidental, operational, labour charges such

as cutting, bending, placing in position, tying including sales and

other taxes on all materials etc. ,and overheads & contractors

profit complete for finished item of work.( APSS No.126)

Make:TATA,SAIL,VSP,JINDAL

-

a)Ground floor : MT 312.85 67435.78 2,10,97,283.77

b)First floor : MT 56.09 68532.17 38,43,969.42

c)Second floor : MT 42.34 69628.55 29,48,072.81

d)Third floor : MT 39.14 70724.94 27,68,174.15

e)Fourth floor : MT 40.76 71821.32 29,27,437.00

f)Fifth floor : MT 39.40 72917.71 28,72,957.77

g)Terrace Floor MT 15.70 74014.09 11,62,021.21

35

Providing Mild steel structural steel Angles, Channels & I Sections

of all sizes as per IS-1161, Labour charges for fabricating all heavy

steel works like Trusses, Stanchions, Heavy beams and Girders

including cost of welding rods, power charges,etc complete in

positions For all floors complete

MT 24.90 86519.84 21,54,344.02









(Rs)

Amount

(Rs.)

36

Supply and fixing doors as per drawings with medium teak wood

frame of section 100mm x 75 mm and Flush door shutters, solid

bond wood block board type with teak veneer on one face and

commercial ply on another face (lipping): 35 mm thick conforming

to IS:2202 including cost and conveyance to site of teak wood

frame, beading for wall and frame joints, flush shutter including

supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm

x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos.

butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm

and 1 no of 200mm long, 1 No. tower bolt (IS:204) of 200 mm x

10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 1 No.

door stopper and 1 No. rubber bush including fixing the fixtures to

door with required number of screws, bolt and nuts and as per

drawing including labour charges for fixing the frame in position,

fixing the 35 mm flush door shutter of one side Teak veneer and

other sde commercial ply as per IS 2202 to the frame etc,applying

the bituminous paint and wood polish to the door one side and

other side enamel paint as per direction of Engineer in charge

including overheads & contractors profit complete for finished item

of work as per APSS 1001 & 1002 (The vertical frame of door shall

be embedded in flooring for a depth of not less than 10 mm) and

as per drawing (1000mm x 2100mm)

No's 78.00 11721.31 9,14,262.18

37



bond wood block board type with teak veneer on one face and

commercial ply on another face (lipping): 30 mm thick conforming

to IS:2202 including cost and conveyance to site of teak wood

frame, beading for wall and frame joints, flush shutter including

supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm

x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos.

butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm,

1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos.

150 mm long handles (IS:208), 1 No. door stopper and 1 No.

rubber bush including fixing the fixtures to door with required

number of screws, bolt and nuts including labour charges including

fixing of 30 mm thick flush door shutter with commercial ply with

veneer french polishing on front side and synthetic enamel paint

on back side including fixing the frame in position, fixing the

shutter to the frame etc, including overheads & contractors profit

complete for finished item of work as per APSS 1001 & 1002 (The

vertical frame of door shall be embedded in flooring for a depth of

not less than 10 mm) (900mm x 2100mm)

No's 160.00 9001.43 14,40,228.80









(Rs)

Amount

(Rs.)

38



bond wood block board type and commercial ply on another face

(lipping): 30 mm thick conforming to IS:2202 including cost and

conveyance to site of teak wood frame, beading for wall and

frame joints, flush shutter including supply and fixing 6 Nos. of MS

Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI

marked Aluminium fixtures of 3 Nos. of butt hinges (IS:205)

150mm long, 1 No. of aldrop (IS:2681) 200mm long, 1 No. of

tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. of 150

mm long handles (IS:208), including fixing the fixtures to door

with required number of screws, bolt and nuts including labour

charges and also fixing of 30 mm thick flush door shutter with

synthetic enamel paint on both sides of frame including fixing the

frame in position, fixing the shutter to the frame etc, including

overheads & contractors profit complete for finished item of work

as per APSS 1001 & 1002 (The vertical frame of door shall be

embedded in flooring for a depth of not less than 10 mm) (750mm

x 2100mm) all as per drawing.

No's 206.00 8170.72 16,83,168.32

39

Plain Cement concrete in (1:5:10) prop. Using 40 mm HBG metal

including cost and conveyance of materials to site including

seignorage fee, Machine mixing, concrete laying tamping,

vibrating, CENTRING,watering curing and all labour charges, hire

and operational charges of machinery, water lead charges and


For DUMMY COLUMNS

a)Second Floor 1.50 7283.62 10,925.43

b)Sixth Floor-Terrace Cum 19.63 8539.30 1,67,626.46

40

Plain Cement concrete in (1:2.5:5) prop. Using 20 to 12 mm

HBG metal including cost and conveyance of materials to site

including seignorage fee, Machine mixing, concrete laying

tamping, vibrating, watering curing and all labour charges, hire and

operational charges of machinery, water lead charges and


For Terrace slab and corners of papapet walls.

a)Second Floor 1.00 5404.09 5,404.09

b)Sixth Floor-Terrace Cum 4.75 5854.46 27,808.69

41

Supplying precast terrazzo chequered tiles conforming to IS:

13801 using marble aggregates of size 10 mm , sand, marble

powder, white cement etc., with terrazzo topping not less than

6mm of tiles overall size not less than 20 mm thick of any coloured

shades set over base coat of cement mortar (1:6) 12 mm thick

over CC bed already laid or RCC roof slab, including near cement

slurry of honey like consistency spread @ 3.3.kgs per sqm &

jointed with neat cement to full depth mixed with pigment of

matching shade including cost of all materials like cement, sand

water and tiles etc., complete, including seigniorage charges,

complete for finished item of work.

Sqm 1019.79 702.28 7,16,178.12

42

Painting Red oxide with two coats with synthetic enamel

paint of approved quality colour and grade-I having VOC (Volatile

Organic Compound ) content less than 50 grams/ liter.over a

primary coat to new welded surface including cost of primary coat

and cost and conveyance of all materials ,labourcharges etc.as

per SS and directed by the departmental authorities for finished

item of work.

Sqm 1091.30 133.66 1,45,863.16

CEMENT CONRETE FLOOR TILES (PLAIN & CHEQUERED) - Super Decorative,Aditya Designer, Maha Bhima









(Rs)

Amount

(Rs.)

Supplying, installation, testing & commissioning of 408 Kgs ( 6

persons ) capacity lift (Elevator) of with machine room type

elevator design conforming to latest lift act and modern lift with

microprocesor including AC-VVVF controller in the existing lift well

/ shaft having minimum speed 0.63 m/sec with a total travel of

22.4 mtrs(Approx) , Gorund Floor plus 5 levels and servicing 6

stops on the same side.The lift shall be of excellent quality and

shall have push buttons, intelligent group controls , floor

announcement system, Geared traction and other features as per

detailed Technical specifications attached. All the lift equipments,

i/c car, car doors self- levelling devices, control devices, indicators,

landing doors, indicators, buffer ropes safety devices i/c all wiring

connection, interconnection and all connected equipments shall be

as per detailed specifications

3.00 1400000.00

The rate shall include approval / obtaining completion certificate

from the electrical / lift inspectorate of Government of Telangana

for installation and commissioning of lifts before handing over the

lifts to Client. The hooks provision based on lift vendors

requirement will be arranged by the Client through the Civil vendor.

The rates are also inclusive of following

a) Electrical works such as laisoning , cabling , lighting , earthing

and temporay electrical arrange to lift works etc.

b) civil works such as bulk head light fixing , all pocket cuttings,

chippings, socket fixing, beams, MS structural works required on

account of additional head room height etc.

c)The rates are inclusive of cleaning debris, disposal of debris due

to lift works, accommodation fee and other insidential charges .

The lift vendor should carry out the lift installation works as per the

final shaft dimensions made available at site and if any civil

rectifications are to be carried out,the same should be carried out

by Lift contractor at no extra cost to Client.

Note: Vendors should give options for car Interiors. The final

choice should as per Client's requirement.Before quoting the rates

, bidders should peruse the Technical specifications and quote the

rates. Make:Johnson,Schindler,Otis

Sub total -- A 17,06,88,869.15

Electrical Items

PVC Conduit-ISI mark, Make:Sudhakar/Modi/Goldmedal -

1

Supply and Fixing of 20mm outer dia heavy grade, FRLS with

IS:9537 part 3 regid PVC pipe concealed in wall with all required

accessories including masonary work for light, fan , common and

separate plug point including all labour charges etc., complete.

RM 172.50 69.48 11,985.30

2

Supply and Fixing of 25mm outer dia Medium grade, FRLS with

IS:9537 part 3 regid PVC pipe concealed in Roof Slabs with all

required accessories including masonary work and labour charges

etc., complete.

RM 10352.50

61.53

6,36,989.33

3


IS:9537 part 3 regid PVC pipe surface with all required

accessories fixing on chromium plated metallic base saddles

including masonary work and all labour charges etc., complete

RM 165.58 69.61 11,526.02

42 Each 42,00,000.00









(Rs)

Amount

(Rs.)

4


IS:9537 part 3 regid PVC pipe concealed in wall with all required

accessories including masonary work for light, fan , common and

separate plug point including all labour charges etc., complete.

RM 4358.25 76.71 3,34,321.36

5

Supply and Laying of P.V.C casing and caping of makes Sudhakar

/ Maco Plast / Avon Plast / Modi (ISI MARK) with double locking

arrangments with groover trunking of size not below 12.5mm

height 25mm size with all accessories, duly sealed at points and

erected on Wall / Ceiling including cost of all materials and labour

charges complete.

RM 70.00 54.08 3,785.60

Point Wiring: Copper Wire Make:Finolex/Havells, Modular

switch:Legrand Myrius/Cabtree Verona/GM Four-Five Ceiling

Rose Make:Gold Medal Olive/ Million Zoom

-

6

Wiring with 2 runs of 14/0.3mm (1.5 Sqmm) FRLS/HFFR PVC

insulated 1100V grade as per IS:694/1990 specification for Copper

cable in existing pipe with 6A / 10A 1 Way 1 Module Modular

Switch control with 6 Module Hot Dip Galvanized modular type

Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo

Ceiling Rose including all labour charges etc., complete for light,

bell, fan and exhaust fan points in Non-Residential Buildings.

Point 1133.00 584.79 6,62,567.07

7

Wiring with 2 runs of 14/0.3mm (1.5 Sqmm) FRLS/HFFR PVC


cable in existing pipe with 6A / 10A 1way/2way 1 Module Modular

Switch control with three way Jumbo Ceiling Rose including all

labour charges etc., complete for above 15 feet and staircase

points .

Point 680.00

877.19

5,96,489.20

Circuit Wiring: Make:Finolex/ Havells -

8

Supply and run of 1 of 14/0.3mm (1.5 Sqmm) FRLS/HFFR PVC


cable in existing pipe for earth continuity including all labour

charges etc., complete.

RM 1235.00 24.43 30,171.05

9

Supply and run of 3 of 36/0.3mm ( 2.5 sq mm ) FRLS/HFFR PVC

insulated flexible copper cable and earthing in existing pipe for

power points including all labour charges etc.,complete.

RM 5435.12

102.71

5,58,241.18

10

Supply and run of 3 of 56/0.3mm ( 4 sq mm ) FRLS/HFFR PVC

insulated flexible copper cable earthing in existing pipe for power

points including all labour charges etc.,complete.

RM 4422.40

151.88

6,71,674.11

11

Supply and run of 4 of 85/0.3mm ( 6 sq mm ) FRLS/HFFR PVC

insulated flexible copper cable and 4 sqmm wire for earthing in

existing pipe for power points including all labour charges

etc.,complete.

RM 3790.25

342.16

12,96,871.94

Socket and switch make: Legrand Myrius/Cabtree Verona/GM

Four-Five-

12

Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket

with shutter with 6A / 10A 1 Way 1 Module Modular Switch control

on a Common switch board with with 3 Module Hot Dip

Galvanized Modular Metal Box covered with 3 Modular Cover

Frame with earth continuity including wire leads, earth connections

along with all labour charges etc., complete.

Each 420.00 381.72 1,60,322.40

13

Supply and Fixing of 20A 2 Module Modular Socket with shutter

and 16A / 20A 1 Way 1 Module Modular Switch with indicator duly

recessed in wall with 3 Module Hot Dip Galvanized Modular Metal

Box size covered with 3 Modular Cover Frame including earth

connections and all labour charges etc., complete.[ Power plug ]

Each 312.00 533.99 1,66,604.88









(Rs)

Amount

(Rs.)

14

Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket

with shutter-2 Nos and 6A / 10A 1 Way 1 Module Modular Switch

controls-2Nos duly recessed in wall with 6 Module Hot Dip

Galvanized Modular Metal Box size covered with 6 Modular Cover

Frame including earth connections and all labour charges etc.,

complete.[ For computer switch board].

Each 126.00 711.23 89,614.98

Networking -

15

Supply and fixing of Modular co-Axial socket type TV Antenna

outlet on 2 moduler hot dip galvanized metal box and 2 modular

cover frame including giving connections, cost of all accessories

and labour charges etc. Complete. make: Legrand Myrius/Cabtree

Verona/GM Four-Five

Nos 63.00 251.07 15,817.41

16

Supply and fixing of Cat 6 RJ-45 information outlets including duel

face plate on 2 moduler hot dip galvanized metal box including

giving connections, cost of all accessories and labour charges etc.

Complete. I/O & duel face plate make: Legrand/Molex

Each 63.00 473.75 29,846.25

17

Supply and run of LAN Cable cat - 6 UTP cable in existing PVC

conduit including cost and conveyance of all materials and labour


Makes:Molex / Legrand.

RM 4565.00

31.64

1,44,436.60

18

Supply and fixing of 24 Port patch panels including giving

connections cost of all accessories and all labour charges etc.,

complete. Makes:Molex / Legrand.

Each 4.00

6630.89

26,523.56

19

Supply and fixing of 24 Port manageble switches including giving

connections cost of all accessories and all labour charges etc.,

complete.

Makes : CISCO / Net Gear

Each 4.00

6833.12

27,332.48

20

Supply and fixing of 6U floor mounting net work rack with power

spike including all accessories and giving all connections, labour


Makes : HCL / Vall.

Each 4.00

5102.47

20,409.88

Fixtures LED Make:Philips/Crompton/Havells -

21

Supply and transportation of 20W, 2000 lumens, T8,1200mm

length LED retro tube light,wide operating voltage with double side

connection, PF≥0.9, Surge protection: > 2KV, THD<15%, with

inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by

the department and as per IS specifications, minimum CRI≥80,.etc

complete with 5 years warranty.

Nos 472.00

1163.42

5,49,134.24

22

Fixing of 20W/18W/36W/45W/70W led tube light luminaire on wall

/ Ceiling with / TW /PVC round blocks with all accessories

including giving connections and all labour charges etc., complete.

Nos 472.00

122.70

57,914.40

23

Supply and fixing of Electronic musical bell on 150 x 200 mm

(6"x8") decolam block including giving connections cost of all

accessories and all labour charges etc., complete. Make:GM/Gold

Medal

Each 61.00

359.34

21,919.74

24

Supply and fixing of batten holder / slanting holder with 3W LED

lamp in lieu of ceiling rose of light point complete with all

connections and all labour charges without bulb (for new

installation).

Nos 124.00 212.46 26,345.04

Fan Makes : Crompton/Bajaj -

25

Supply of 48" (1200mm) 5 star rated Sweep ISI mark

Ceiling Fan as per IS 374 - 1979 and, with double ball

bearings but without Regulator.

Nos 250.00

1892.25

4,73,062.50









(Rs)

Amount

(Rs.)

26

Supply of 1 Module Modular type Electronic step type Fan

Regulator with 1 or 2 Module Hot Dip Galvanized Modular Metal

Box covered with 2 modular cover frame etc., complete. make:

Legrand Myrius/Cabtree Verona/GM Four-Five

Nos 250.00 494.23 1,23,557.50

27

Labour charges for Fixing of Ceiling fan and regulator including

transportation and giving connections with twin core wire etc.,

complete.

Nos 250.00

144.01

36,002.50

28Supply and fixing of Fan hook box with dummy cover etc.

complete for finished item of workEach 250.00

105.6626,415.00

Exhaust fan Makes : Crompton / Havells Ventil Air-DB -

29

Supply of 9" (225mm) Light duty exhaust fan with

wire guard etc complete etc., complete.

Makes : Crompton / Havells Ventil

Air-DB / Orient hill air.

Nos 183.00

1341.44

2,45,483.52

30

Labour charges for fixing of Exhaust fan in wall with necessary

connections and masonary work of making hole, finishing etc.,

complete

Nos 183.00

531.72

97,304.76

Distribution Board Make:Legrand / Schneider/L&T, Isolator

and MCB Makes : Legrand-DX3 / Schneider-Acti9 / L&T Exora.-

31

Supply and fixing of 12 Way SPN DB with IP 43 Protection as per

IS:13032 concealed in wall and suitable for singile phase 10 Nos

S.P out goings and for 1No Incommer including internal

connection and labour charges for flush mounting etc., complete.

Incommer: 32A DP Isolator-1No.

Outgoing: 10kA-6-32A SP MCBs - 10 Nos

Nos 6.00

5535.75

33,214.50

32

Supply and fixing of 4 Way TPN DB Horizontal with IP 43

Protection as per IS:13032 concealed in wall and suitable for 12

Nos S.P.out goings and for 1 No 4 pole Incommer including

internal connection and labour charges for flush mounting etc.,

complete.Incommer: 40A FP Isolator-1No.

Outgoing: 10kA-6-32A SP MCBs - 12 Nos

Nos 62.00

7697.84

4,77,266.08

33

Supply and fixing Distribution board with 20A SP Plug and Socket

with SS enclosure concealed in wall with 20A 10KA SP MCB,

C/D Curve ISI Mark including internal connection and labour

charges for surface / flush mounting etc., complete .

Nos 124.00 2069.36 2,56,600.64

LT PANELS -









(Rs)

Amount

(Rs.)

34

Main LT Panel Board:

Fabrication ,Transportation , Supply, Installation, Testing and

Commissioning of suitable size , plinth mounting indoor type LT

Distribution panel of 14 guage CRCA sheet with the following

incorporated in the panel for Distributing the power supply .(The

working drawings for panel board should be got approved by the

Department before fabrication of Panel).

Main incoming: 125A 4 Pole MCCB, Adjustable, Confirms to

IS/IEC 60947-2 having Breaking Capacity 25kA with thermal

magnetic release Panel Mounted of makes L&T / Schneider /

Hager -1No. 125A Alluminium Bus bar

(25mmx6mmxSuitable lenght) - 4nos -Main

Sleaves tape for bus bar R Y B N-required length

Insulators for busbar fixing (panel type)-8 Nos

Phase indicator lamps - 1set (L&T make)

Extended earth terminals - 2nos with 25X6 mm G.I Strip - 2.0 Mtrs

Current Transformer- 230/5A - 3 NosKAPPA make

Voltmeter(0-500V) - Digital type ( conzerv/HPL Make)

Ammeter (0-500A) - Digital type ( conzerv/HPL Make)

supply of HRC Fuse links 2A - 3 Nos

SET 3.00 167845.00 5,03,535.00

Outgoing :1) 63A, TP, 10kA , MCB -22 No. Legrand/Schneider

make. 3 phase energy meter:22 no's of

Make:CONZERVE/HPL/HAVELLS

The panel Size approx:1.6X2.1X0.40 mtrs

The above Panel shall be cleaned with 7 tank process and

painting with one coat of red oxide and two coats of powder

coated light grey as per IS 631 of (5) etc complete and provided

suitable base channel of 75X40mm size etc., complete as directed

by the Engineer- in - Charge.

-

Cables: Makes : Torrent / Universal/KEI -

35

Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V

grade armoured alluminium cable as per specification

confirming to IS:7098 (Part - I).

RM 250.00

209.05

52,262.50

36



confirming to IS:7098 (Part - I).RM 750.00

770.31

5,77,732.50

37



confirming to IS:7098 (Part - I).RM 75.00

676.01

50,700.75

Glands -

38

Supply and Fixing of Single compression brass cable glands for

3.5 core XLPE armoured cable for 25 Sqmm with brass washers

and crimping type aluminium lugs confirming to I.S specifications

for cable of 25 Sq.mm including nuts and bolts with connections.

SET 2.00 276.58 553.16

39





SET 6.00 632.31 3,793.86

40





SET 6.00 540.69 3,244.14









(Rs)

Amount

(Rs.)

41

Providing independent earthing for Important equipment with

40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I

pipe of 0.3mtr. long connected with reducer providing G.I funnel

with mesh enclosed in brick masonry (CM 1:3) Chamber of

400mmx 400m x 400mm with suitable cast iron cover duly

providing staggered holes filling with salt and charcoal from the

bottom of the pipe giving earth connection from electrode through

G.I strip of 25 x 6mm x 200mm length with all accessories and

labour charges complete, as per IS specifications 732/1982 (Part

II)

Each 8.00 4238.81 33,910.48

42Supply and Run of 25mm x 6mm G.I Strip including cost of all

accessories and labour charges etc., complete.RM 190.00

103.1419,596.60

43Supply and Run of No.8 SWG G.I wire including cost of all

accessories and labour charges etc., complete.RM 340.00

16.985,773.20

44

Earth work excavation of Trench in hard ground soil, laying of U.G

cables from 70 sqmm to 400 Sq,mm on sand cushion covering the

cable with bricks and back filling of Trench duly providing route

indicator embedded in C.C including cost and conveyance of

materials and labour charges etc., complete.

RM 800.00 359.21 2,87,368.00

Sub total -- B 94,58,221.20

Sanitary Items -

1

Supply, Installation and commissioning approved make floor

mounted Close Coupled wash down EWC conforming to IS:2556

(Part 8)-2004 suit with 'P' or 'S' trap with dual flush porcelain

cistern fixed on wash down EWC with all internal parts of dual

flush cistern, ultra solid seat cover of approved make with rubber

buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter

connection pipe wall flanges all of approved make etc. complete

for finished item of work in all respects: White Colour

Make:Neycer/Parryware/Jaquar/CERA/Hindustan Sanitaryware

Each 64.00 9073.29 5,80,690.56

2

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI

marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap

Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm

including Brick masonry seat for Orissa pan/ Indian W.C. using

2nd class bricks as per standard practice, PVC low level system

with internal components & short bend: 10 Litres capacity Single

Flush, 15 mm PVC connection with brass union nut C.P coated

and 15mm CP finish brass stop valve. Complete for finished item

of work. Make:Neycer/Parryware/Jaquar/CERA/Hindustan

Sanitaryware

Each 62.00 3779.97 2,34,358.14

3

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st

quality conforming to IS:2556-Part-4:1972 with waste fittings like

rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel

pipe thread conforming to IS:2963-1979 and fitted with 15 mm

nominal bore Chromium Plated Pillar Tap of 1st quality Indian

make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete

with standard CI brackets including wooden block: 550x400mm -

Single C.P. Pillar cock Make: Neycer /Parryware /Jaquar

/CERA/Hindustan Sanitaryware

-

a)550x400mm - Single C.P. Pillar cock Each 124.00 1669.00 2,06,956.00

b)450x300mm - Single C.P. Pillar cock Each 62.00 1452.00 90,024.00

4

S&F of 15 mm brass body CP finish bib tap of not less than 300

grams weight screw type (full turn) with internal / external threaded

connection conforming to IS 8931 including cost & conveyance of

all materials, labour charges for finished item of work complete for

all floors. Make:Seiko/CERA/Senior

Each 249.00 253.36 63,086.64


mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25

mailto:VAT@%204%25








(Rs)

Amount

(Rs.)

5

Providing & fixing PVC/ SWR pipes conforming to IS 13592:1992

including necessary specials,jointing with adhesives ,fixing vertical

pipes over wooden battens including cost and conveyance of all

materials at site complete for finished item of work.

-

a)75 mm dia. @ 4 Kg/sq.cm Rmt 1619.72 95.44 1,54,586.08

b)110 mm dia. @ 4 Kg/sq.cm Rmt 550.65 181.41 99,893.42

6

Supply & fixing SWG 150x100mm gully trap of 1st class as per

IS -651 & 4127 with CI grating and constructing brick masonry in

CM 1:6 prop. Intermediate chamber and fitted with 30.48x28.86cm

CI frame and hinged coverfor finished item of work

Each 63.00 703.28 44,306.64

7

Constructing 904.0 mm (3’0”) dia solid block masonry

inspection chamber as per IS - 4111: Part-1:1986 with cement

mortar (1:6) prop using fly-ash blocks of 225 mm thick from

approved source having a minimum crushing strength of 10

N/sq.mm including plastering with cement mortar 1:3 prop; ½”

thick both inside and outside fitted with 20” dia RCC manhole

covers and frames including excavating pits up to a depth of 904

mm (3'-0") in all sorts of soils (excluding rock) and laying cement

concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and

P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard

specification and including cost and conveyance of all materials

like cement, sand, bricks, water etc., to site, cost of seigniorage

charges on all materials and all incidental and operational, labour

charges like mixing cement mortar, constructing masonry, lift

charges, curing etc., complete for finished item of work as per

Standard specification with RCC cover 22" dia with nominal

reinforcement 3" thick and hooks for lifting etc., for finished the

item of work.

Each 54.00 8337.07 4,50,201.78

8

Providing & fixing Bronze Ball valve with SS ball an SS spindle

as per IS Class - 1, Indian make heavy type including cost &

conveyance of all material to work spot and all labour charges

including fixing in position for finished item of work. Make:Zoloto/R-

Brand

-

a)20 mm NB size Each 17.00 310.17 5,272.89

b)25 mm NB size Each 14.00 436.28 6,107.92

c)40 mm NB size Each 7.00 1064.57 7,451.99

d)50 mm NB size Each 13.00 1599.70 20,796.10

e)15 mm NB size Each 121.00 213.60 25,845.60

9

Supplying, laying, jointing and testing SWG SP-1 pipes of ISI

make conforming to ISI 651 & 4127 with airtight cement joints in

CM 1.5:1 prop. Including excavation of trenches and socket pits in

any soil (except rock requiring blasting) up to 1524 mm(3'0") depth

and refilling with watering and tamping for finished item of work

-

a)101.6mm Rmt 322.00 480.59 1,54,749.98

b)152.4mm Rmt 805.25 715.77 5,76,373.79

10Supply and fixing S&F CP finish brass soap dish for finished item

of workEach 124.00

583.9872,413.52

11

Supply and fixing of toilet paper holder Jaquar make queen

series: with 10 years warranty: Chrome plated complete for

finished item of work

Each 124.00

899.83

1,11,578.92

12

Supply and fixing 25mm dia & 609.6mm long aluminium anodized

towel rod with brackets and aluminium screws etc,. Complete the

finished item of work.

Each 124.00

169.29

20,991.96









(Rs)

Amount

(Rs.)

13

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) -

SDR-13.5 pipes, having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings i/c fixing

the pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings, with one step CPVC solvent cement and the cost

ofcutting chases and making good the same including testing of

joints complete as per direction ofEngineer-in-Charge.Concealed

work, including cutting chases and making good the wall etc

Make:Ashirvad, Prince, Astral

-

a)15.90mm OD Rmt 85.25 194.05 16,542.76

b)22.20mm OD Rmt 2100.50 216.55 4,54,863.28

c)28.60mm OD Rmt 150.00 275.29 41,293.50

d)34.90mm OD Rmt 150.00 362.77 54,415.50

-

14

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes-SDR-13.5, having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings including

fixing the pipe with clamps at1.00 m spacing. This includes jointing

of pipes & fittings with one step CPVC solvent cement and

testingof joints complete as per direction of Engineer-in-

Charge.Internal work - Exposed on wall Make:Ashirvad, Prince,

Astral

-

a)15.90mm OD RMT 60.00 159.97 9,598.20

b)22.20mm OD RMT 60.00 182.47 10,948.20

c)28.60mm OD RMT 72.50 241.20 17,487.00

d)34.90mm OD RMT 778.00 328.69 2,55,720.82

e)41.30mm OD RMT 142.50 408.67 58,235.48

f)54.00mm OD RMT 1001.57 596.14 5,97,075.94

-

15

Supply and fixing 4" (101.6mm) multi floor trap with Jali-

PVC/SWR pipe fittings of standard make of ISI Brand inculding

fixing in CM1:3 prop and cost and conveyance of all materials at

site complete for finished item of work

Each 368.00 162.47 59,788.96

16Supplying and fixing TV shape mirror with plastic frame size 609.6

mm x 457 .2 mm for finished item of workEach 186.00

529.4598,477.70

17

Manufacture, Supply, & Delivery of HDPE Pipes PE-100

conforming to IS 4984 - 1995 including laying,jointing and

transportation to any where in T.G, including excise duty, sale tax

and specials etc., complete.(supply upto 90 mm diain coil & above

90 mm diastraight length in 6 m.) 6.0 kg/Sqcm

-

a)63mm dia Rmt 340.00 178.41 60,659.40

b)75mm dia Rmt 575.00 237.64 1,36,643.00

18

Providing & Placing on Terrace (at all floor levels) polyethylene

water storage tank with Double layer approved brand &

manufacture with cover and suitable locking arrangement &

making necessary holes for inlet & outlets and over flow pipes but

without fittings & base support for tanks for finished item of

work.Make-Sintex

Litre 7000.00 7.95 55,650.00

19

Supply and fixing Bronze Gate/ Globe valve as per IS - 778 Class -

I, Indian make heavy type - 65 mm NB Size for finished item of

work.Make:Zoloto/R-Brand

-

a)65mm NB Size Each 7.00 5903.44 41,324.08

b)80mm NB Size Each 7.00 8750.63 61,254.41

20

Supply and fixing of Stainless steel 4" dia round Grating with frame

for nahany or floor trap cover with holes including fittings, etc. For

complete the item of work.

Each 124.00

65.90

8,171.60









(Rs)

Amount

(Rs.)

21

Supply and fixing CP finish brass bottle trap 250 mm long with wall

connection pipe & wall Flange etc., complete the finished item of

work

Each 124.00

979.36

1,21,440.64

22Supplying & fixing stainless steel sink size 20" x18" x 8 "

(508x457.2x203.2mm) 1 mm thick with accessories. Make:NiralaEach 62.00

5053.60

3,13,323.20

23

S&F of 15 mm premium variety Chromium plated finish brass body

wall mixer with hand shower with a provision for over head shower

with 115 mm long bend pipe on upper side, connecting legs & wall

flanges conforming to IS 8931 with 10 years warranty Jaquar/

Hindware/ Parryware

Each 124.00 3760.66 4,66,321.84

Sub total -- C 58,64,921.43

Total Amount ( A +B+C) I 18,60,12,011.78

Provision for GST 12% II 2,23,21,441.41

Provision for Labour Cess 1% II 18,60,120.12

Total Gross Amount (I+II+III) 21,01,93,573.31

Total Gross Amount Round off 21,01,93,573.00

Note:

The estimated rates are prepared from TS SoR 2017-18


RGUKT, Basar, Nirmal Dist.,Telangana – 504107 VOLUME – III...

Documents

Transcript of RGUKT, Basar, Nirmal Dist.,Telangana – 504107 VOLUME – III...