RFID C116 Sensors Catalog · 2014-09-10 · when tag misalignment occurs. If your tag will be...
Transcript of RFID C116 Sensors Catalog · 2014-09-10 · when tag misalignment occurs. If your tag will be...
Pan
elC
onn
ect
Co
nnec
tion
Sys
tem
sIn
tro
duc
tion
Qui
ck S
elec
tion
Gen
eral
11-1
RFID
Contents
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
General InformationQuick Selection Guide .................................................................................................................................. Page 11-2
Overview ............................................................................................................................................................ Page 11-3
ProductsInterface Blocks............................................................................................................................................... Page 11-6
Rectangular Transceivers ............................................................................................................................Page 11-8
Square Transceivers ...................................................................................................................................... Page 11-10
M30 Transceivers............................................................................................................................................ Page 11-12
M18 Transceivers............................................................................................................................................ Page 11-14
Tags...................................................................................................................................................................... Page 11-16
Handheld Interfaces....................................................................................................................................... Page 11-19
IndexesCat. No. Index.................................................................................................................................................. Page 13-1
Comprehensive Product Index..................................................................................................................Page 14-1
New
Description Interface Block Transceivers Tags Handheld Interface
Features
• EtherNet/IP interface• Embedded switch with DLR• ISO 15693 / ISO 18000-3 M1• Read/write ICODE tags SLI,
SL2• 1 and 2 channel interface
offered• 2 inputs with no outputs or
1 input and 1 output• Compatible with all
transceivers
• Maximum distance fromEtherNet/IP interface is 300 ft
• Read/write ICODE tags SLI,SL2
• Read/write speeds up to625 B/s
• ISO 15693 / ISO 18000-3 M1• Max sensing range: 168 mm
(rectangular), 85 mm (square),60 mm (M30), and 30 mm(M18)
• ICODE ISO 15693 compliant• EEPROM/FRAM memory• Tag memory options: 128 B,
64 B, 256 B, and 2 KB• Passive tags (no battery)• Tag styles: label, smart card,
disc, square• Reusable Rislan tags assure
long life in harshenvironments
• High impact resistant tags• Mount on metal tags• High temperature tags
• 13.56 MHz high frequencyRFID solution
• Wireless connectivity forstreamlined dataflow
• Rugged for commercial andindustrial environments
• IP65 rated – protects againstdust and rain
• Touch screen• 45- or 52-key models• Stylus and stylus holder• Compatible with all
Allen-Bradley RFID tags• Rechargeable battery
Frequency 13.56 MHz 13.56 MHz 13.56 MHz 13.56 MHz
Connector (4) M12 M12 — —
EnclosureRating IP67 IP67 IP68, IP69K IP65
ProductSelection Page 11-6
Rectangular (Page 11-8)Square (Page 11-10)
M30 (Page 11-12)M18 (Page 11-14)
Page 11-16 Page 11-19
PanelC
onnect
Co
nnection S
ystems
Introd
uction
Quick S
election
General
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.11-2
RFID
Quick Selection Guide
New
Radio Frequency Identification (RFID)Allen-Bradley industrial RFID system consists of three key components:� Communication Interfaces: To either a network or controller.� Transceivers: At each point or station in the manufacturing process where identification or the reading/writing of information is desired.� RFID Tags: One for each item, pallet, tote, or transport fixture used in the application.
System Features� 1- and 2-channel EtherNet/IP™ interface offered� Embedded switch, with Device Level Ring (DLR)� Rugged transceiver styles designed for industrial locations� 13.56 MHz high frequency technology ideal for light industrial applications� Tag memory options: 128 B, 64 B, 256 B, and 2 KB� Read/write speeds up to 625 B/s� Different tag styles with sensing distances of up to 7.3 in. (185 mm)� Reusable Rislan® tags assure long life and reliable performance in harsh environments� AOP and AOI available
Dual-Channel Integrated Architecture Application Diagram
Pan
elC
onn
ect
Co
nnec
tion
Sys
tem
sIn
tro
duc
tion
Qui
ck S
elec
tion
Gen
eral
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold. 11-3
RFID
Overview
PanelView™ Plus
EthernetSwitch
AnotherEthernetDevice
Max. 300 ftCable Length
General I/O
PowerSupply
Interface Transceivers
FlatPack
VersaCube™
M30Cylindrical
M18Cylindrical
1769 CompactLogix™
New
Selection Flowchart
PanelC
onnect
Co
nnection S
ystems
Introd
uction
Quick S
election
General
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.11-4
RFID
Overview
�Production steps contained within a manufacturing facility.‡ Production steps outside of manufacturing facility.
High FrequencyHF 13.56 MHz
ICODE
Open or ClosedLoop System
Closed
UHF900 MHz
Gen2(See Encompass
partner)
Open
Do you require tagSecurity, Privacy, or High
Temperature?
SLI-S Tags64 Bytes
Security
SLI-L Tags256 Bytes
Privacy
Sensingdistance?
Transceiver:Square (40x40)
Recommended tagsize:
30…50 mm
2…4 in.
Transceivers:M18, M30
Recommended tagsize:
10…30 mm
0…2 in.
4+ in.
1
3
Tag SpeedFast vs Slow/
Stopped
Transceiver:Rectangular (80x90)
Recommended tagsize:
50…86 mm
Fast
How muchdata storage
required?
Up to 128 Bytes
Up to 2 kBytes
No
Data storageServer vs Tag
(Machinescommunicate?)
SLI Tags FRAM TagsSLI Tags128 Bytes
High Temp
4
2
5 6 7
8
9
(most commonly usedin RFID HF applications)
New
1. High Frequency RFID products are typically used in industrial applications to follow a product through the manufacturing process. The transceiver to tagrange is typically less than 7.3 in (185 mm). ICODE technology is advantageous because the tags are available from numerous suppliers in an infinite numberof packages.
2. An application can track the process via the tag either by storing the data directly on the tag or linking the UID (Unique Identifier) to data in a server. In highspeed applications (>1.5 m/s), it's recommended to read only the UID into the PLC. If the tags are used on multiple machines that do not communicate witheach other, then the data is usually stored on the tag. By storing all the data on the tag, the data will be saved through power cycle events on the machineas well.
3. SLI-S tags are designed for applications requiring high tag security. Memory management can be password protected to ensure that only authorized usersget read/write access.
4. SLI-L tags are designed for applications which require privacy. Tags have a password protected Privacy Mode in which the tag will not respond tocommands until it receives the correct password.
5. High temperature tags are used when the tag needs to be used in extreme temperature applications. Temperature profiles are provided to show the length oftime the tag can withstand the given temperature.
6. Allen-Bradley offers label tags, smart cards, disc tags, and square tags, as well as tags for specialty applications such as high-impact and mounton metal. SLI tags are most commonly used in high frequency RFID applications.
7. These tags are ideal for applications where the tags move throughout the facility on machines that are not communicating with each other.
8. This section helps determine the recommended transceiver for your application. If you have a high speed application, it's best to choose the largesttransceiver which will provide the largest antenna range. This will provide the longest time the tag is in the field for read/write functions. This will also helpwhen tag misalignment occurs. If your tag will be stopped when all read/write functions occur and tag misalignment is not an issue, smaller transceivers canbe used.
9. The larger the transceiver, the larger the antenna field. The size of the field will determine how much time the tag will be in the field and the amount of tagmisalignment can occur without read/write issues.
Pan
elC
onn
ect
Co
nnec
tion
Sys
tem
sIn
tro
duc
tion
Qui
ck S
elec
tion
Gen
eral
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold. 11-5
RFID
Overview
New
DescriptionThe EtherNet/IP interface block is designed to solve industrial highfrequency 13.56 MHz RFID applications which require networking ormultiple read/write points. Local LEDs allow for quick visualdiagnosis of module status, network status, I/O status, and powerstatus.
Each interface block can have up to two transceivers and twogeneral I/O devices. This allows the RFID system to be easilyintegrated into an existing architecture. It also allows the RFIDsystem to respond to sensor input and vice versa. For example, asensor can detect the presence of an object and send a signal tothe transceiver to read the RFID tag.
The high frequency 13.56 MHz RFID system is also highlyconfigurable and expandable. The transceivers can be mounted upto 300 ft away from the interface blocks. The EtherNet/IP ports areconfigured as an embedded switch with Device Level Ring (DLR),which allows multiple interface blocks to be connected in star, tree,linear, and ring topologies. The RFID system is ISO 15693 compliantand compatible with tags of many different styles and sizes.
Features� 13.56 MHz RFID� ISO 15693 / ISO 18000-3 M1� Sealed housing rated for IP67 eliminates enclosure costs� Low installation cost and easy to replace without rewiring because
industry-standard M12 DC micro connectors are used forconnection to the EtherNet/IP network and auxiliary power supply.I/O connectors are sealed M12 DC micro style
� Single or dual-port EtherNet/IP, configured as an embeddedswitch, supports star, tree, linear, and ring topologies
� Isolated power output port allows output device to be turned off,while maintaining power to the transceivers, the input port, andthe EtherNet/IP connection
� Outputs electronically protected� One- or two-channel RFID interface offered� Two inputs/no outputs or one input/one output� Compatible with all transceivers
Specifications
General
Enclosure Type Rating IP67
Mounting Type On-Machine, Panel
OperatingTemperature� -20…+60 °C (-4…+140 °F)
Non-OperatingTemperature� -40…+85 °C (-40…+185 °F)
Relative Humidity 5…95% ‡
Operating Shock 30 g
Weight 0.20 kg (0.45 lb)
Vibration 5 g at 10…500 Hz
Compliance CE, cULus, C-Tick
Electrical
Supply Voltage 24V DC
Max. Output Currentper RFID Transceiver
Port100 mA @ 24V DC
Max. Output CurrentRating per I/O Point 0.5 A @ 30V
Max. Output SurgeCurrent Rating per I/O
Point1.2 A
Max. Current for InputDevice Power per I/O
Point5 mA @ 30V
Potential Max. Aux.Current per Module 4 A
�Unpackaged‡ Non-condensing
Module Status LED
Indicator State Summary
Off No power
Flashing Green Standby
Green Device operational
Flashing Red Minor fault
Red Major fault
Network Status LED
Indicator State Summary
Off No power or no IP address
Flashing Green No connections
Green Connected
Flashing Red Connection timeout
Red Duplicate IP
Link1 and Link2 LEDs
Indicator State Summary
Off No link
Green 100 Mbps
Flashing Green 100 Mbps/active
Yellow 10 Mbps
Flashing Yellow 10 Mbps/active
I/O LED
Indicator State Summary
Off I/O off
Yellow I/O on
RFID Port LED
Indicator State Summary
Off No power
Flashing Green No tag present, but communicating
Green Communicating
Flashing Red No transceiver connected
Amber Tag present
PanelC
onnect
Co
nnection S
ystems
Introd
uction
Quick S
election
General
High Frequency 13.56 MHz ICODE
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.11-6
RFID
EtherNet/IP Interface Block
New
Product Selection
Interface Port � Inputs Outputs Cat. No.
1 transceiver 1 1 56RF-IN-IPS12
2 transceivers 1 1 56RF-IN-IPD22
2 transceivers 2 — 56RF-IN-IPD22A
� Configured as embedded switch. Supports star, tree, linear, and ringtopologies.
Pinouts
Accessories
Interface Connector Style Connector Type No. of Pins Shielding Wire Size, AWG Cat. No.
Transceiver
DC Micro (M12)patchcord
Straight female tostraight male
4
Shielded 22
889D-F5FCDM-J�
DC Micro (M12)cordset
Straight female 889D-F5FC-J‡
Straight male 889D-M5FC-J‡
M12 terminalchamber
Straight female— 18…22
871A-TS5-D1
Straight male 871A-TS5-DM1
Auxiliary Power
DC Micro (M12)patchcord
Straight female tostraight male
4
Unshielded 22
889D-F4ACDM-�
DC Micro (M12)cordset
Straight female 889D-F4AC-‡
Straight male 889D-M4AC-‡
M12 terminalchamber
Straight female— 22
871A-TS4-D
Straight male 871A-TS4-DM
EtherNet/IP M12 D-codepatchcord
Straight male tostraight male
4
Shielded 26
1585D-M4UBDM-§
Straight male to rightangle male 1585D-M4UBDE-§
Right angle male toright angle male 1585D-E4UBDE-§
Straight male tostraight male
Unshielded 24
1585D-M4TBDM-§
Straight male to rightangle male 1585D-M4TBDE-§
Right angle male toright angle male 1585D-E4TBDE-§
�Replace symbol with 0M3 (0.3 m), 1 (1 m), 2 (2 m), 5 (5 m), or 10 (10 m) for standard cable lengths.‡ Replace symbol with 2 (2 m), 5 (5 m), or 10 (10 m) for standard cable lengths.§ Available in 0.3, 0.6, 1, 2, 5, 10, 15 m, and increments of 5 m up to 75 m.
EtherNet/IP Power ConnectorRFID Transceiver
Interface Input Connector Output Connector
Connector Diagram 3
21
4
4 3
1
2 5
43
1
25
43
1
25
43
1
2
Pin Function Function Function Function Function
1 TX+ Output Power + Sensors Power + Sensor Power Not Used
2 RX+ Module Power + Data+ Not Used Not Used
3 TX- Module Power - Sensor Power - Return Return
4 RX- Output Power - Data - Input Output
5 Shell — Shield/FE Shield/FE Shield/FE
Pan
elC
onn
ect
Co
nnec
tion
Sys
tem
sIn
tro
duc
tion
Qui
ck S
elec
tion
Gen
eral
High Frequency 13.56 MHz ICODE
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold. 11-7
RFID
EtherNet/IP Interface Block
Approximate DimensionsDimensions are not intended to be used for installation purposes.
37(1.46)
179(7.05)
169(6.64)
43.25(1.7)
19.8(78)
166.5(6.56)
27(1.06)
New
RFID
Rectangular Transceiver
11-8Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE Transceivers
General
Quick S
election
Introd
uction
Co
nnection S
ystems
PanelC
onnect
Description
Features� 13.56 MHz high frequency RFID solution� ICODE ISO 15693/ISO 18000-3 M1 Compliant� Read/write speeds up to 625 B/s� Built-in LEDs for diagnostics� Reliable performance in harsh environments
Typical Applications� Asset tracking� Data acquisition� Product handling� Tool management� Automotive� Food and pharmaceutical� Security and entrance
Specifications
Scanning Area
Supply Voltage 24V DC
Max. CurrentConsumption 100 mA
Tag Compatibility ICODE tags SLI, SL2ISO 15693/ISO 18000-3 M1
Connector M12 4-pin male
CommunicationSystems Half duplex communication system (RS-485)
Baud Rate (Host) 9600, 19200, 38400, and 115200 bps
Frequency 13.56 MHz
Baud Rate (Tag) 26.48 Kbps
Data Length 8-bit
Operating Temperature -25…+70 °C (-13…+158 °F)
Storage Temperature -40…+85 °C (-40…+185 °F)
Operating Humidity� 35…95% RH
Storage Humidity� 25…85% RH
Vibration 10 g at 10…500 Hz
Shock Resistance 50 g
Enclosure Rating IP67
Recommended SensingDistance‡ 4 in. (102 mm)
Max. Sensing Distance‡ 6.6 in. (168 mm)
Max. Distance fromInterface Module 300 ft (91.4 m)
Compliance CE, cULus, C-Tick
Type of Equipment Industrial control
�Non-condensing‡ Range reference for a 50 mm diameter tag.
Note: Ideal tag distance for maximum performance is 70…130 mm.
The rectangular transceiver is the largest transceiver in theAllen-Bradley high frequency 13.56 MHz RFID family measuring 80 x90 mm. This transceiver is ISO 15693 compliant and can read/writeICODE tags SLI and SL2, allowing infinite tag configuration optionsfrom various manufacturers. Local LEDs allow for quick visualdiagnosis of module status and read/write status.
Rectangular transceivers are recommended for high-speed/high-performance applications because of their large sensing range.Transceivers can be mounted up to 300 ft (91.4 m) away from theinterface module, and tags are readable from distances up to 6.6 in.(168 mm). This transceiver has an enclosure rating of IP67 and isdesigned to withstand harsh industrial environments.
Misalignment
Sens
ing
Dist
ance
[mm
]
0
50
100
150
Side Lobe Side Lobe
OFF OFF
OFF
0-150 -100 -50 50 100 150
130
70
ON
New
RFID
Rectangular Transceiver
11-9Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE Transceivers
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
n S
yste
ms
Pan
elC
onn
ect
Product Selection
Description Cat. No.Rectangular 80 x 90 mm transceiver 56RF-TR-8090
LED Illumination Pattern
LED Display Content
Module Status LEDGreen light Power ON
No illumination No power
Read/Write LED
Green light Normal operation
Flashing green (shortinterval) Communicating
Flashing amber (shortinterval) Sensing tag
Flashing red (longinterval) Communication error
Flashing green (longinterval) No tag
Connector Pinout
Pin Signal
1 24V DC
2 Data +
3 GND
4 Data -
AccessoriesCordsets
No. of Pins Color Code Shield Wire Size [AWG]
Cat. No. �
StraightFemale
Right AngleFemale Straight Male
Right AngleMale
4-pin A Foil Shield 22 889D-F5FC-J2 889D-R5FC-J2 889D-M5FC-J2 889D-E5FC-J2
�The 2 at the end of the cat. no. is for 2 m cable length. Replace the 2 with 5 (5 m) or 10 (10 m) for standard cable lengths. Example: Cat. No. 889D-F5FC-J2becomes Cat. No. 889D-F5FC-J10.
Patchcords
No. of Pins Color Code Shield Wire Size [AWG]
Cat. No. �
Straight FemaleStraight Male
Straight FemaleRight Angle
Female
Right AngleFemale
Straight Male
Right AngleFemale
Right Angle Male4-pin A Foil Shield 22 889D-F5FCDM-J2 889D-F5FCDE-J2 889D-R5FCDM-J2 889D-R5FCDE-J2
�The 2 at the end of the cat. no.is for 2 m cable length. Replace the 2 with 0M3 (0.3 m), 1 (1 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Example: Cat.No. 889D-F5FCDM-J2 becomes Cat. No. 889D-F5FCDM-J0M3.
Note: Stainless steel connectors may be ordered by adding an S to the cat. no. (e.g. Cat. No. 889DS-F5FCDM-J*).
Approximate DimensionsDimensions are not intended to be used for installation purposes.
94(3.7)
65(2.56)
65(2.56)
83(3.27)
106.5(4.19)
40(1.57)
0.2(0.01)
4 3
1
2
New
RFID
Square Transceiver
11-10Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE Transceivers
General
Quick S
election
Introd
uction
Co
nnection S
ystems
PanelC
onnect
Description
Features� 13.56 MHz high frequency RFID solution� ICODE ISO 15693/ISO 18000-3 M1 Compliant� Read/write speeds up to 625 B/s� Transceivers can be mounted up to 300 ft away from interface
modules� Built-in LEDs for diagnostics� Universal mounting� Reliable performance in harsh environments
Typical Applications� Asset tracking� Data acquisition� Product handling� Tool management� Automotive� Food and pharmaceutical� Security and entrance
Specifications
Scanning Area
Supply Voltage 24V DC
Max. CurrentConsumption 100 mA
Tag Compatibility ICODE tags SLI, SL2ISO 15693/ISO 18000-3 M1
Connector M12 4-pin male
CommunicationSystems Half duplex communication system (RS-485)
Baud Rate (Host) 9600, 19200, 38400, and 115200 bps
Frequency 13.56 MHz
Baud Rate (Tag) 26.48 Kbps
Data Length 8-bit
Operating Temperature -25…+60 °C (-13…+140 °F)
Storage Temperature -40…+85 °C (-40…+185 °F)
Operating Humidity� 35…95% RH
Storage Humidity� 25…85% RH
Vibration 10 g at 10…500 Hz
Shock Resistance 50 g
Enclosure Rating IP67
Recommended SensingDistance‡ 2 in. (50 mm)
Max. Sensing Distance‡ 3.3 in. (85 mm)
Max. Distance fromInterface Module 300 ft (91.4 m)
Compliance CE, cULus, C-Tick
Type of Equipment Industrial control
�Non-condensing‡ Range reference for a 50 mm diameter tag.
The square transceiver is designed for use with the Allen-Bradleyhigh frequency 13.56 MHz RFID system. This transceiver is ISO15693 compliant and can read/write ICODE tags SLI and SL2,allowing infinite tag configuration options from variousmanufacturers. Local LEDs allow for quick visual diagnosis ofmodule status and read/write status.
Square transceivers have universal mounting capability and measure40 x 40 mm. Transceivers can be mounted up to 300 ft (91.4 m)away from the interface module, and tags are readable fromdistances up to 3.3 in. (85 mm). This transceiver has an enclosurerating of IP67 and is designed to withstand harsh industrialenvironments.
Note: Ideal tag distance for maximum performance is 30…60 mm.Misalignment
Sens
ing
Dist
ance
[mm
]
0
100
Side Lobe Side Lobe
OFF OFF
OFF
0-80 -40 40 80
60
30
ON
New
RFID
Square Transceiver
11-11Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE Transceivers
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
n S
yste
ms
Pan
elC
onn
ect
Approximate DimensionsDimensions are not intended to be used for installation purposes.
Product Selection
Description Cat. No.Square 40 x 40 mm transceiver 56RF-TR-4040
LED Illumination Pattern
LED Display Content
Module Status LEDGreen light Power ON
No illumination No power
Read/Write LED
Green light Normal operation
Flashing green (shortinterval) Communicating
Flashing amber (shortinterval) Sensing tag
Flashing red (longinterval) Communication error
Flashing green (longinterval) No tag
Connector Pinout
Pin Signal
1 24V DC
2 Data +
3 GND
4 Data -
AccessoriesCordsets
No. of Pins Color Code Shield Wire Size [AWG]
Cat. No. �
StraightFemale
Right AngleFemale Straight Male
Right AngleMale
4-pin A Foil Shield 22 889D-F5FC-J2 889D-R5FC-J2 889D-M5FC-J2 889D-E5FC-J2
�The 2 at the end of the cat. no. is for 2 m cable length. Replace the 2 with 5 (5 m) or 10 (10 m) for standard cable lengths. Example: Cat. No. 889D-F5FC-J2becomes Cat. No. 889D-F5FC-J10.
Patchcords
No. of Pins Color Code Shield Wire Size [AWG]
Cat. No. �
Straight FemaleStraight Male
Straight FemaleRight Angle
Female
Right AngleFemale
Straight Male
Right AngleFemale
Right Angle Male4-pin A Foil Shield 22 889D-F5FCDM-J2 889D-F5FCDE-J2 889D-R5FCDM-J2 889D-R5FCDE-J2
�The 2 at the end of the cat. no.is for 2 m cable length. Replace the 2 with 0M3 (0.3 m), 1 (1 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Example: Cat.No. 889D-F5FCDM-J2 becomes Cat. No. 889D-F5FCDM-J0M3.
Note: Stainless steel connectors may be ordered by adding an S to the cat. no. (e.g. Cat. No. 889DS-F5FCDM-J*).
5.4(0.21)
12(0.47)
30(1.18)
30(1.18)
46 (1.81)40 (1.57)
7.5 (0.3)
40(1.57)
40(1.57)
73.5 (2.89)
4 3
1
2
New
RFID
Cylindrical M30 Transceiver
11-12Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE Transceivers
General
Quick S
election
Introd
uction
Co
nnection S
ystems
PanelC
onnect
Description
Features� 13.56 MHz high-frequency RFID solution� ICODE ISO 15693/ISO 18000-3 M1 Compliant� Read/write speeds up to 625 B/s� Transceivers can be mounted up to 300 ft away from interface
modules� Built-in LEDs for diagnostics� Reliable performance in harsh environments
Typical Applications� Asset tracking� Data acquisition� Product handling� Tool management� Automotive� Food and pharmaceutical� Security and entrance
Specifications
Supply Voltage 24V DC
Max. CurrentConsumption 100 mA
Tag Compatibility ICODE tags SLI, SL2ISO 15693/ISO 18000-3 M1
Connector M12 4-Pin Male
CommunicationSystems Half duplex communication system (RS-485)
Baud Rate (Host) 9600, 19200, 38400, and 115200 bps
Frequency 13.56 MHz
Baud Rate (Tag) 26.48 Kbps
Data Length 8-bit
Operating Temperature -25…+70 °C (-13…+158 °F)
Storage Temperature -40…+85 °C (-40…+185 °F)
Operating Humidity� 35…95% RH
Storage Humidity� 25…85% RH
Vibration 10 g at 10…500 Hz
Shock Resistance 50 g
Enclosure Rating IP67
Recommended SensingDistance‡ 45 mm
Max. Sensing Distance‡ 75 mm
Max. Distance fromInterface Module 300 ft
Compliance CE
�Non-condensing‡ Range reference for a 50 mm diameter tag.
The cylindrical M30 transceiver is designed for use with theAllen-Bradley high frequency 13.56 MHz RFID system. Thistransceiver is ISO 15693 compliant and can read/write ICODE tagsSLI and SL2, allowing infinite tag configuration options from variousmanufacturers. Local LEDs allow for quick visual diagnosis ofmodule status and read/write status.
Cylindrical M30 transceivers are recommended for panel mountingand for use with smaller tags with a diameter of 10…30 mm.Transceivers can be mounted up to 300 ft (91.4 m) away from theinterface module, and tags are readable from distances up to 3.0 in.(75 mm). This transceiver has an enclosure rating of IP67 and isdesigned to withstand harsh industrial environments.
Scanning Area
Note: Ideal tag distance for maximum performance is 30…55 mm.
Misalignment
Sens
ing
Dist
ance
[mm
]
0
50
100
Side Lobe Side Lobe
OFF OFF
ON
OFF
0-80 -40 40 80
30
10
70
90
55
New
RFID
Cylindrical M30 Transceiver
11-13Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE Transceivers
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
n S
yste
ms
Pan
elC
onn
ect
Product Selection
Description Cat. No.M30 cylindrical transceiver 56RF-TR-M30
LED Illumination Pattern
LED Display Content
Module Status LEDGreen light Power ON
No illumination No power
Read/Write LED
Green light Normal operation
Flashing green (shortinterval) Communicating
Flashing amber (shortinterval) Sensing tag
Flashing red (longinterval) Communication error
Flashing green (longinterval) No tag
Connector Pinout
Pin Signal
1 24V DC
2 Data +
3 GND
4 Data -
Approximate DimensionsDimensions are not intended to be used for installation purposes.
AccessoriesCordsets
No. of Pins Color Code Shield Wire Size [AWG]
Cat. No. �
StraightFemale
Right AngleFemale Straight Male
Right AngleMale
4-pin A Foil Shield 22 889D-F5FC-J2 889D-R5FC-J2 889D-M5FC-J2 889D-E5FC-J2
�The 2 at the end of the cat. no. is for 2 m cable length. Replace the 2 with 5 (5 m) or 10 (10 m) for standard cable lengths. Example: Cat. No. 889D-F5FC-J2becomes Cat. No. 889D-F5FC-J10.
Patchcords
No. of Pins Color Code Shield Wire Size [AWG]
Cat. No. �
Straight FemaleStraight Male
Straight FemaleRight Angle
Female
Right AngleFemale
Straight Male
Right AngleFemale
Right Angle Male4-pin A Foil Shield 22 889D-F5FCDM-J2 889D-F5FCDE-J2 889D-R5FCDM-J2 889D-R5FCDE-J2
�The 2 at the end of the cat. no.is for 2 m cable length. Replace the 2 with 0M3 (0.3 m), 1 (1 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Example: Cat.No. 889D-F5FCDM-J2 becomes Cat. No. 889D-F5FCDM-J0M3.
Note: Stainless steel connectors may be ordered by adding an S to the cat. no. (e.g. Cat. No. 889DS-F5FCDM-J*).
Mounting Brackets
Description Cat. No.
Swivel/tilt style 60-2439
Right angle style 871A-BRN30
4 3
1
2
Read/WriteStatus LED
Ø28
73
63
12.2 35.8 1
7
M30x1.5 M12x1
Ø28Ø14
ModuleStatus LED
New
RFID
Cylindrical M18 Transceiver
11-14Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE Transceivers
General
Quick S
election
Introd
uction
Co
nnection S
ystems
PanelC
onnect
Description
Features� 13.56 MHz high frequency RFID solution� ICODE ISO 15693/ISO 18000-3 M1 Compliant� Read/write speeds up to 625 B/s� Transceivers can be mounted up to 300 ft away from interface
modules� Built-in LEDs for diagnostics� Reliable performance in harsh environments
Typical Applications� Asset tracking� Data acquisition� Product handling� Tool management� Automotive� Food and pharmaceutical� Security and entrance
Specifications
Supply Voltage 24V DC
Max. CurrentConsumption 100 mA
Tag Compatibility ICODE tags SLI, SL2ISO 15693/ISO 18000-3 M1
Connector M12 4-Pin Male
CommunicationSystems Half duplex communication system (RS-485)
Baud Rate (Host) 9600, 19200, 38400, and 115200 bps
Frequency 13.56 MHz
Baud Rate (Tag) 26.48 Kbps
Data Length 8-bit
Operating Temperature -25…+70 °C (-13…+158 °F)
Storage Temperature -40…+85 °C (-40…+185 °F)
Operating Humidity� 35…95% RH
Storage Humidity� 25…85% RH
Vibration 10 g at 10…500 Hz
Shock Resistance 50 g
Enclosure Rating IP67
Recommended SensingDistance‡ 30 mm
Max. Sensing Distance‡ 55 mm
Max. Distance fromInterface Module 300 ft
Compliance CE
�Non-condensing‡ Range reference for a 50 mm diameter tag.
The cylindrical M18 transceiver is designed for use with theAllen-Bradley high frequency 13.56 MHz RFID system. Thistransceiver is ISO 15693 compliant and can read/write ICODE tagsSLI and SL2, allowing infinite tag configuration options from variousmanufacturers. Local LEDs allow for quick visual diagnosis ofmodule status and read/write status.
Cylindrical M18 transceivers are recommended for panel mountingand for use with smaller tags with a diameter of 10…30 mm.Transceivers can be mounted up to 300 ft (91.4 m) away from theinterface module, and tags are readable from distances up to 2.2 in.(55 mm). This transceiver has an enclosure rating of IP67 and isdesigned to withstand harsh industrial environments.
Scanning Area
Misalignment
Sens
ing
Dist
ance
[mm
]
0
45
100
Side Lobe Side Lobe
OFF OFF
ON
OFF
0-80 -40 40 80
20
40
60
80
Note: Ideal tag distance for maximum performance is 20…45 mm.
New
RFID
Cylindrical M18 Transceiver
11-15Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE Transceivers
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
n S
yste
ms
Pan
elC
onn
ect
Product Selection
Description Cat. No.M18 cylindrical transceiver 56RF-TR-M18
LED Illumination Pattern
LED Display Content
Module Status LEDGreen light Power ON
No illumination No power
Read/Write LED
Green light Normal operation
Flashing green (shortinterval) Communicating
Flashing amber (shortinterval) Sensing tag
Flashing red (longinterval) Communication error
Flashing green (longinterval) No tag
Connector Pinout
Pin Signal
1 24V DC
2 Data +
3 GND
4 Data -
AccessoriesCordsets
No. of Pins Color Code Shield Wire Size [AWG]
Cat. No. �
StraightFemale
Right AngleFemale Straight Male
Right AngleMale
4-pin A Foil Shield 22 889D-F5FC-J2 889D-R5FC-J2 889D-M5FC-J2 889D-E5FC-J2
�The 2 at the end of the cat. no. is for 2 m cable length. Replace the 2 with 5 (5 m) or 10 (10 m) for standard cable lengths. Example: Cat. No. 889D-F5FC-J2becomes Cat. No. 889D-F5FC-J10.
Patchcords
No. of Pins Color Code Shield Wire Size [AWG]
Cat. No. �
Straight FemaleStraight Male
Straight FemaleRight Angle
Female
Right AngleFemale
Straight Male
Right AngleFemale
Right Angle Male4-pin A Foil Shield 22 889D-F5FCDM-J2 889D-F5FCDE-J2 889D-R5FCDM-J2 889D-R5FCDE-J2
�The 2 at the end of the cat. no.is for 2 m cable length. Replace the 2 with 0M3 (0.3 m), 1 (1 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Example: Cat.No. 889D-F5FCDM-J2 becomes Cat. No. 889D-F5FCDM-J0M3.
Mounting Brackets
Description Cat. No.
Swivel/tilt style 60-2649
Right angle style 871A-BRN18
Note: Stainless steel connectors may be ordered by adding an S to the cat. no. (e.g. Cat. No. 889DS-F5FCDM-J*).
Approximate DimensionsDimensions are not intended to be used for installation purposes.
4 3
1
2
Ø16.6
M18x1 M12x1
Ø16.6
35.812.2
63
73
7
Read/WriteStatus LED Module
Status LED
New
RFID
ICODE Tags
11-16Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE Tags
General
Quick S
election
Introd
uction
Co
nnection S
ystems
PanelC
onnect
DescriptionIndustrial RFID systems are designed to withstand harshenvironments. Reusable read/write tags allow for flexibility ininformation and application. ISO 15693 is an open standard for highfrequency 13.56 MHz RFID. ICODE tags are available in manydifferent styles and sizes to fit most applications.
Features� 13.56 MHz high frequency RFID solution� ICODE ISO 15693 Compliant� EEPROM/FRAM Memory� 64 B, 128 B, 256 B, and 2 KB read/write tags� Read/write speeds up to 500 B/s� Passive tags (no battery)� Reusable Rislan® tags� Reliable performance in harsh environments� Label tags� Smart card tags� Disc tags� Square tags� High impact resistant tags� Mount on metal tags� High temperature tags� ICODE tags have data retention of 10 years and 100,000 write
cycles� FRAM 2K B tags are rated for 10 billion read/write cycles
Typical Applications� Asset tracking� Data acquisition� Product handling� Tool management� Automotive� Food and pharmaceutical� Security and entrance
Specifications
Disc Tags (10 mm)
Memory Size and Type ICODE SLI-S 256 B – EEPROM
Operating Temperature -25…+70 °C (-13…+158 °F)
Materials Epoxy, transparent yellowish
Weight 130 mg
Disc Tags (16 mm)
Memory Size and Type ICODE SLI 128 B – EEPROMICODE SLI-L 64 B – EEPROM
Axial Compression Strength 1000 N
Radial Compression Strength 1000 N
Operating Temperature -25…+70 °C (-13…+158 °F)
Protection IP69K
Materials Modified thermoplastic, white
Weight 1.0 g ± 0.15 g
Disc Tags (20, 30, and 50 mm)
Memory Size and Type ICODE SLI 128 B – EEPROMF-Mem 2K B
Vibration (IEC 68.2.6) 10 g at 10…2000 Hz
Shock (IEC 68.2.29) 40 g
Operating Temperature -25…+85 °C (-13…+185 °F)
Protection IP69K
Materials PA6 Modified, black
Weight1.3 g (20 mm)3.0 g (30 mm)9.5 g (50 mm)
Mount on Metal Options 20 mm, 50 mm
Label Tags (50 x 50 mm, 54 x 86 mm)
Memory Size and Type ICODE SLIx 128 B – EEPROMICODE SLI 128 B – EEPROM
Bending Diameter > 50 mm, tension less than 10 N
Static Pressure < 10 MPa (10 N/mm²)
Operating Temperature -40…+85 °C (-40…+185 °F)
Transponder Face Material Opaque Matt Paper 79
Transponder BackingMaterial Siliconized Paper 56
Transponder AntennaMaterial Aluminum
Smart Cards (54 x 86 mm)
Memory Size and Type ICODE SLI 128 B – EEPROM
Operating Temperature(ISO/IEC 10373) -35…+50 °C (-30…+122 °F)
Materials PVC, white
High Impact Resist Tags (35 mm disc)
Memory Size and Type ICODE SLI 128 B – EEPROM
Vibration (IEC 68.2.6) 10 g at 10…2000 Hz
Shock (IEC 68.2.29) 40 g
Operating Temperature -25…+85 °C (-13…+185 °F)
Protection IP69K
Materials PA6 high impact
Weight 7.8 g
High Temperature Tags (50 x 50 mm)
Memory Size and Type ICODE SLI 128 B – EEPROM
Data Retention 10 years
Write Endurance 100,000 cycles
RF Data Transfer Rate 26 kbit/s
Temperature Range -55…+240 °C (-67…+464 °F)
Protection IP68
Materials PPS resin
Weight 25.7 g
New
RFID
ICODE Tags
11-17Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE Tags
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
n S
yste
ms
Pan
elC
onn
ect
Product Selection
TypeMemory
Size
AvailableUser
Memory Outline Dimensions Application
Transceiver-Tag Sensing Distance, Max. [mm (in.)]
Cat. No.Rectangular Square M30 M18
SLI 128 B 112 B
Label54x86 mm
Mostcommon
185 100 72 52 56RF-TG-5486
50x50 mm 150 90 66 50 56RF-TG-5050
Smart card 54x86 mm 185 100 79 55 56RF-TG-5486SC
Disc
16 mm 76 51 35 27 56RF-TG-16
20 mm 78 53 41 32 56RF-TG-20
30 mm 106 68 52 40 56RF-TG-30
50 mm 168 85 75 55 56RF-TG-50
35 mm High impactresist 105 60 45 38 56RF-TG-35HIR
20 mm Mount onmetal
35 23 20 18 56RF-TG-20MOM
50 mm 63 32 29 25 56RF-TG-50MOM
SLI-L 64 B 32 B Disc 16 mm Privacy 76 51 35 27 56RF-TG-16-64B
SLI-S 256 B 160 B Disc 10 mm Security 45 20 16 12 56RF-TG-10-256B
FRAM 2048 B 2K B Disc
20 mmHigh
memory
78 53 36 28 56RF-TG-20-2KB
30 mm 106 68 44 35 56RF-TG-30-2KB
50 mm 168 85 62 48 56RF-TG-50-2KB
SLI 128 B 112 B Square 50 mm Hightemperature 155 95 71 59 56RF-TG-50HT
Approximate DimensionsDimensions are not intended to be used for installation purposes.
Disc Tags
Ø16±0.2(0.63±0.008)
Ø20±0.5(0.787±0.02)
Ø30±0.5(1.18±0.02)
2.5±0.5(0.1±0.02)
2.5±0.5(0.1±0.02)
2.9±0.1(0.114±0.004)
Ø5.2±0.3(0.205±0.012)
Ø5.2±0.3(0.205±0.012)
Ø50±0.5(1.969±0.02)
Ø34±0.3(1.339±0.012)
Ø5.6±0.3(220±0.012)
8±0.3(0.315±0.012)
3.5±0.5(0.188±0.02)
Ø9.5±0.3(0.374±0.012)
1±0.3(0.04±0.012)
Smart Cards High Temperature Tags
85.6 (3.37)
53.98(2.13)
51±0.5(2.008±0.02)
51±0.5(2.008±0.02)
6.5(0.256)
Ø5.5 (0.217)Ø10.5(0.413)
New
RFID
ICODE Tags
11-18Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE Tags
General
Quick S
election
Introd
uction
Co
nnection S
ystems
PanelC
onnect
Label Tags56 (2.126)2 (0.079)
Marking of Bad Ones Unwinding Direction
47(1.85)
47 (1.85)
56(2.126)
50(1.969)
50 (1.969)
15 (0
.59)
1.5 (0.059)
1.5 (0.059)
Unwinding Direction
Marking of Bad Ones
54(2.126)
86 (3.386)82 (3.228)
57(2.244)
50(1.969)
1.5 (0.059)96 (3.78)
3.5
(0.1
38)
2 (0
.079
)
2 (0.079)
New
RFID
Handheld Interfaces
11-19Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
n S
yste
ms
Pan
elC
onn
ect
Description
Features� 13.56 MHz high frequency RFID solution� Wireless connectivity for streamlined dataflow� Rugged for commercial and industrial environments� IP65 rated – protects against dust and rain� Touch screen� 45- or 52-key models� Stylus and stylus holder� Compatible with all Allen-Bradley RFID tags� Rechargeable battery
Typical Applications� Asset tracking� Data acquisition� Product handling� Tool management� Automotive� Food and pharmaceutical� Security and entrance
SpecificationsOperating System Microsoft® Windows® CE .NET 5.0
Processor Intel® PXA270 XScale® Technology Processor –624MHz
Memory 512MB FLASH built-in128MB SDRAM
Mass Storage Type 2 Compact FLASH Card user accessible
Interface
One RS-232 Serial PortUSB (Host and Client)Internal Wireless LAN 802.11b/gInternal Bluetooth®
Battery Nickel Metal Hydride Extended CapacityRechargeable battery 2500 mAh, 7.2V
Recharge/Line Power 11…18V DC, 1.5 A
Operating Time 9 hr (typical)
Storage Temperature � -20…+70 °C (-4…+158 °F)
Operating Temperature -20…+50 °C (-4…+122 °F)
Charging Temperature�
0…40 °C (32…104 °F)
Humidity ‡ 5…95%
Enclosure Rating IP65
Weight With battery: 32.3 oz (915 g)Without battery: 23 oz (652 g)
Certifications
FCC Class AEN55022, 1998. (CISPR 22) Class A,EN55022/IEC 6100-4-6 RF CONTINUOUSCONDUCTED EN55024, 1998 – ETSI EN 301489-1,2002 – ETSI EN 301 489-3,2002 – EN/IEC61000-4-2 ESD – EN/IEC 61000-4-3 RFELECTROMAGNETIC FIELD – EN/IEC 61000-4-4FAST TRANSIENTSRoHS Compliant
� No batteries installed.� Fast charge will not start below 0 °C (32 °F).‡ No condensation.
The Allen-Bradley RFID ICODE handheld interface maximizes bothmobility and performance for high frequency 13.56 MHz RFIDapplications. Each handheld interface comes with multipleconnectivity methods, such as wireless, Bluetooth, and USB. TheRFID handheld interface is IP65 rated for harsh industrial andoutdoor environments.
With its portability and ability to read, write, and save RFID tags, theRFID ICODE handheld interface is the ideal accessory for systemsetup, field service, fleet management, time and attendance, andany other situation where tags cannot be easily read by a stationarytransceiver.
New
RFID
Handheld Interfaces
11-20Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold.
High Frequency 13.56 MHz ICODE
General
Quick S
election
Introd
uction
Co
nnection S
ystems
PanelC
onnect
Product Selection
Accessories
Description Cat. No.
Single position charging cradle with domestic power supply cable, USB cable, stylus 57RF-HH-56US1
Domestic wall mount power supply, serial cable, USB cable, stylus 57RF-HH-56US2
Power supply kit (includes power supply, adapters for USA, European, Australian, UK, and rest of world), serial cable, USB cable, stylus 57RF-HH-56IN
Battery pack (rechargeable) 57RF-HH-56BAT
Serial cable (15 ft, straight, 9-pin female connector, RS-232, molded) 57RF-HH-56CA
Industrial Compact Flash 64 MB Memory Card 1784-CF64
Industrial Compact Flash 128 MB Memory Card 1784-CF128
Approximate DimensionsDimensions are not intended to be used for installation purposes.
120.65 (4.75)
71.63 (2.82)Screen
53.59 (2.11)Screen
249.94 (9.84)
46.48(1.83)
77.98 (3.07)
96.01 (3.78)
Front View Side View
36.32(1.43)39.62(1.56)
Description Cat. No.
RFID ICODE handheld interface, 52-key directional pad 57RF-HH-56A
RFID ICODE handheld interface, 45-key pad 57RF-HH-56B
New