Revolutionise your business with Integr8tor · (For Ucam, Genesis / InCam or Gerber-X based CAM...
6
Revolutionise your business with Integr8tor As a busy PCB manufacturer, you know that: Your business receives numerous quote requests daily You can never afford not to quote You must respond to those requests fast, with accurate quotes Only 10-20% of those requests will become firm orders Quoting costs you time and labour You don't always know which requests will become orders, you don't know which new contacts might become long term clients who give your facility valuable regular business. In short, you must answer every single quote request with costs that reflect your business capabilites and costs. And you need to do it yesterday. Yet quoting costs you time and labour and stops your CAM engineers from focusing on real value-add tasks... ...that's why more and more PCB manufacturers are turning to The PCB industry's only sales and engineering server for auto input and design analysis.
Transcript of Revolutionise your business with Integr8tor · (For Ucam, Genesis / InCam or Gerber-X based CAM...
Revolutionise your business with Integr8tor
As a busy PCB manufacturer, you know that:
Your business receives numerous quote requests daily
You can never afford not to quote
You must respond to those requests fast, with accurate quotes
Only 10-20% of those requests will become firm orders
Quoting costs you time and labour
You don't always know which requests will become orders, you don't know which new contacts might become long term clients who give your facility valuable regular business. In short, you must answer every single quote request with costs that reflect your business capabilites and costs.
And you need to do it yesterday.
Yet quoting costs you time and labour and stops your CAM engineers from focusing on real value-add tasks...
...that's why more and more PCB manufacturers are turning to
The PCB industry's only sales and engineering server
for auto input and design analysis.
Integr8tor’s workflow including the NEW AutoCam functionality
Integr8tor automatically recognises all standard format design data as it enters your e-mail system, and downloads it, creates a job number for it, and analyses it, 24/7. It gives you a full breakdown of the design, and even flags mis-sing, or erroneous data. And it does so in minutes, feeding the results directly to your CAM department.
Integr8tor carries out design-rule, DfM and capability checks that will tell you whether you can make the job and where manufacturing issues may arise, and its output can be fed quickly and easily into your quote engine, speeding the quoting process and eliminating the risk of human error.
At the same time, Integr8tor automatically sets up a CAM job, so that when the order is confirmed, your busy en-gineers are saved the donkey work in the subsequent CAM process. This frees them up to focus their specialist skills on core profit-generating tasks. At the same time, it also supports your sales efforts by enabling you to answer your customers faster, and with more accurate information, helping you to develop relationships built on trust and
Input formats Outputs
All known archive formats such as zip, rar 7zip
All CAM input formats such as, gerber-X, gerber-d,
ODB++, Ucam Job, Ucam dpf
All Drill / Rout formats such as Excellon 1 and 2,
S&M 1000 and 3000, hitachi, Posalux
Netlist formats such as, IPC356A, IPC356B,
Mentor NF, ODB netlist, Ucam Netlist, etc.
Documentation files
Job archive
Original job (DPF/ODB++/RS-274X)
Layer images (PDF/PNG)
QED Report (PDF/XML)
Rebuilt job (DPF/ODB++)
Clean job (DPF/ODB++)
CAM Report (PDF)
UFD Files etc.
Integr8tor Cockpit
Integr8tor SheetOptimizer
QED Report
Single PCB view Copper Layers Bareboard PCB Dimensions
General Summary Drill Tools Rout Tools Panel utilization
Graphical Stackup Finishes Viaplug Sheet optimizer
Archive Contents Soldermask Scoring Process Parameters
The QED report contains many sections with specific information. The report can be created in many different languages.
Summary of most important parameters
Top and Bottom
view of finished PCB
Detailed copper
layer information
Detailed Hole in-
formation
Detailed Drill Tool
information
Detailed Finishes
information
Detailed Reports
Integr8tor Fact Sheet
Features :
Collects the required parameters for quoting automatically
Creates a ready to use job for CAM (Original Job)
Saves precious time for the engineers in both Sales and CAM
Engineers can concentrate on their core Jobs
Functions:
Integrated e-mail server accepts incoming mails
Stackup recognition
Registration, Polarity and Outline detection
Layer renaming to PCB manufacturer’s own conventions
Design analysis
Detection of conflicts in data
Delivers:
QED Report in PDF and XML format
A ready to use original job for use in CAM. (For Ucam, Genesis / InCam or Gerber-X based CAM systems)
Architecture:
Client – Server architecture
Automated knowledge-based background workflow applications
Fast, off-line operation on server away from CAM
Contact Ucamco Head Office:
Ucamco NV.Bijenstraat 19
9051 Gent
Belgium
Tel: +32 9 216 99 00
Fax: +32 9 216 99 12
Email: [email protected]
Web: www.ucamco.com
About Ucamco
Ucamco (former Barco ETS) is a market leader
in PCB CAM software and laser photoplotting
systems with a global network of sales and sup-
port centers. Headquartered in Ghent, Belgium,
Ucamco has more than 25 years of continuous
experience in developing, supplying and sup-
porting leading-edge photoplotters and front-end
tooling solutions for the global PCB industry.
