REVOLUTIONARY TAPPING ARM MACHINES · Modules for Model R-SHARK Modules for Model R-TIGER. Next...
Transcript of REVOLUTIONARY TAPPING ARM MACHINES · Modules for Model R-SHARK Modules for Model R-TIGER. Next...
REVOLUTIONARY TAPPING ARM MACHINE S
www.roscamat.com
ElectricSERIES: MoSquIto, tIgER & ShaRk
Mosquito 1 Speed – 300 Vertical 300 M2-M14 #0 – 9/16” 34
Mosquito 1 Speed - 600 Vertical 600 M2-M10 #0 – 3/8” 16
Mosquito 1 Speed – 300 VH Vertical/Horizontal 300 M2-M14 #0 – 9/16” 34
Mosquito 1 Speed – 600 VH Vertical/Horizontal 600 M2-M10 #0 – 3/8” 16
Mosquito 2 Speed – 300/600 Vertical 300/600 M2-M14 #0 – 9/16” 34
Mosquito 2 Speed – 300/600 VH Vertical/Horizontal 300 M2-M14 #0 – 9/16” 34
Head orientationCapacity (Steel90 kg./mm2)
InchMetricMax Torque
NmDescriptionSpeedRPM
Reach 765 mm. - 30” Height 515 mm. -20” Single Phase 220 V. – available at 110 V. heavy duty cast aluminium construction Base elevator high frequency Electric Motor Speed control tap adaptors of size 19/1 for quick change
OPTIONS AVAILABLE Vertical tapping Vertical & horizontal tapping –Vh- (4x90º) automatic tool Lubrication Control
orientable head V-h, 4x90º
Single Phase220 VOLT
Available in 110 V
Model R·MOSQUITO
TAP UP TO
M14 9/16’’(90 kg./mm2) M16 (aluminium)
orientable head V-hFor model R-Tiger & R-Shark
Module
40 40 340 251 ø 48/3 M27-M36 ½” – 1 3/8”
75 75 185 136 ø 31/2 M18-M27 5/16” – 7/8”
140 140 95 70 ø 31/2 M18- M22 5/16” – ¾”
320 320 44 32 ø 19/1 M2-M16 #0 – 9/16”
500 500 28 21 ø 19/1 M2-M12 #0 – 7/16”
900 900 15 11 ø 19/1 M2-M8 #0 – 5/16”
Torque max. Tapping Capacity - Steel <90KgNm MetricFt•lb Inches
Max. speed. (rpm)
AdapterSize
Modular System - Interchangeable Speed
Modules for Model R-SHARK
Modules for Model R-TIGER. Next Page
ROSCAMAT SHARK Vertical 40 - 900 M2-M36 #0 – 1 3/8”
ROSCAMAT SHARK VH Vertical & Horizontal 40 - 900 M2-M36 #0 – 1 3/8”
OrientationCapacity
InchMetricDescription Speed
RPM
Reach 1020 mm. -48” Height 535 mm. -32” taP uP to M36 – 1 3/8” taP uP to M27 – 1” in horizontal 220 V. Single Phase high frequency motor Electronic speed indicator Right & left rotation control 1 Motor 6 speed capabilities
6 interchangeable speed modules tool lubrication with timer tapping depth control heavy duty cast aluminium construction
OPTIONS Vertical tapping Vertical & horizontal tapping
-Vh- (4x90º)
ROSCAMAT TIGER Vertical 90 -1050 M2-M27 #0 – 7/8”
ROSCAMAT TIGER VH Vertical & Horizontal 90 -1050 M2-M27 #0 – 7/8”
Head OrientationCapacity (Steel90 kg./mm2)
InchMetricDescription
SpeedRPM
Reach 1020 mm. -40”
Height 535 mm. -21” taP uP to M27 – 7/8” 220 V. Single Phase high frequency motor Electronic speed indicator Right & left rotation control 1 Motor 7speed capabilities 7 interchangeable speed modules heavy duty cast aluminium construction
OPTIONS Vertical tapping Vertical & horizontal tapping -Vh- (4x90º)
tool lubrication with timer tapping depth control
OPTIONS Vertical tapping Vertical & horizontal tapping -Vh- (4x90º)
tool lubrication with timer tapping depth control
TAP UP TO
M36 1-3/8’’
TAP UP TO
M27 1’’in Horizontal
TAP UP TO
M27 7/8’’
Model R·TIGER
Model R·SHARK
(90 kg./mm2) M16 (aluminium)
Single Phase220 VOLT
Available in 110 V
Single Phase220 VOLT
Available in 110 V
PneumaticSERIES 200, 400, 500 & 500 Rh
Reach 1100 mm. - 43” Height 680 mm. - 27” taP uP to M24– 7/8” Speed Range (rpm) 90 - 2100 air motor engineered for
tapping heavy duty cast aluminum construction
utilizes size 19/1 & 31/2 tap adaptors for quick change
1 Motor 7 speed capabilities 7 interchangeable speed modules
Drilling Module up to ø8 mm. - 5/16” (soft materials)
OPTIONS AVAILABLE
Vertical tapping Vertical & horizontal tapping -Vh- (4x90º)
tool lubrication system -E-
Model R·200
Model R·400
Reach 935 mm.– 37” Height 660 mm.– 26” tap up to M14 (M16 al) - 9/16” air motor engineered for tapping heavy duty cast aluminium construction Base elevator tap adaptors of Size 1 for quick change
OPTIONS Vertical tapping Vertical & horizontal tapping –Vh- (4x90º) 350 or 750 rpm single speed models
TAP UP TO
M14-9/16’’
TAP UP TO
M24-7/8’’
Roscamat 200 – 350 Vertical 350 M2-M14 #0 – 9/16”
Roscamat 200 – 750 Vertical 750 M2-M10 #0 – 3/8”
Roscamat 200 VH – 350 Vertical/Horizontal 350 M2-M14 #0 – 9/16”
Roscamat 200 VH – 750 Vertical/Horizontal 750 M2-M10 #0 – 3/8”
Head orientationCapacity (Steel90 kg./mm2)
InchMetricDescription
SpeedRPM
ROSCAMAT 400 V Vertical M2-M24 #0 – 7/8”
ROSCAMAT 400 V –E- Vertical M2-M24 #0 – 7/8”
ROSCAMAT 400 VH Vertical & Horizontal M2-M24 #0 – 7/8”
ROSCAMAT 400 VH –E- Vertical & Horizontal M2-M24 #0 – 7/8”
Head orientationCapacity (Steel90 kg./mm2)
InchMetricDescription
(90 kg./mm2) M16 (aluminium)
(90 kg./mm2) M27 (aluminium)
orientable head V-h
Reach 2180 mm. - 83” Height 1110 mm. - 44” taP uP to M24– 7/8” Speed Range (rpm) 90 - 2100 air motor engineered for tapping heavy duty cast aluminum construction utilizes size 19/1 & 31/2 tap adaptors for
quick change 1 Motor 7 speed capabilities 7 interchangeable speed modules Drilling Module up to ø8 mm. - 5/16 “ (soft materials)
OPTIONS AVAILABLE
Vertical tapping Vertical & horizontal tapping -Vh- (4x90º) Multiposition, tap in any angle (Rh series) tool lubrication system -E-
Model R·500 / R·500VH / R·500RH
the RH series cantap at any angle!
R-500 R-500 RH
Modules for Model ROSCAMAT TIGER (Electric,220 V)Modules for Models ROSCAMAT R400, R500 and R500RH (Pneumatic)
(90 kg./mm2) M27 (aluminium)
TAP UP TO
M24-7/8’’
ROSCAMAT 500 V Vertical M2-M24 #0 – 7/8”
ROSCAMAT 500 V –E- Vertical M2-M24 #0 – 7/8”
ROSCAMAT 500 VH Vertical & Horizontal M2-M24 #0 – 7/8”
ROSCAMAT 500 VH –E- Vertical & Horizontal M2-M24 #0 – 7/8”
ROSCAMAT 500 RH Multiposition M2-M24 #0 – 7/8”
ROSCAMAT 500 RH E Multiposition M2-M24 #0 – 7/8”
Head OrientationTapping Capacity
(Steel90 kg./mm2)InchMetric
Description
Module
90 90 150 66 ø 31/2 M18-M27 5/16”–3/8”
170 170 79 58 ø 31/2 M18-M22 5/16”–5/8”
300 300 44 32 ø 19/1 M2-M16 #0–9/16”
550 550 24 18 ø 19/1 M2-M12 #0–1/2”
750 750 17 13 ø 19/1 M2–M8 #0–3/8”
1.050 1.050 12,5 9 ø 19/1 M2-M6 #0–5/16”
2.100 2.100 6 4 B16 Drill up to ø 8 - 5/16” Aluminum, Cast Iron
Torque max. Tapping Capacity - Steel <90KgNm MetricFt•lb Inches
Max. speed. (rpm)
AdapterSize
-V- -VH- -RH-
Modular System - Interchangeable Speed
Accessories
Dimensions SeriesInch 200 400 500 Mosquito Tiger Shark mm
Description
Knee table 500x500x900mm 1911/16”x1911/16”x357/16” • • •
Small table 700x700x850mm 279/16”x279/16”x337/16” • •
Medium table 850x850x850mm 337/16”x337/16”x337/16” • • • • •
Large table 1100x850x850mm 435/16”x337/16”x337/16” • • • • •
DescriptionDimensions Series
200 400 500 Mosquito Tiger Shark mm. Inch.
Small Clamp N/A N/A • • • •
Large Clamp N/A N/A • • • • • •
Magnetic support 150x150 •
Magnetic support Ø200 • •
Magnetic support Ø250 • • •
Dimensions Seriesmm inch 200 400 500 Mosquito Tiger Shark
Description
Pneumatic Lifter 550 mm 550 21 5/8” • • • • • •
Column 740 13 ¾”x 13 ¾” x 29 ½” • • • • • •
Trolley 40 27 9/16” x 27 9/16” x 9/16” • • • • • •
Lifter 2000 mm.-Pneumatic 2000 13 25/32” x 13 25/32” x 76 5/32” • • • • • •
Radial Extension 1000 39 3/8” x 10 7/8” • • • • • •
Toolholders aplications
Reduction Cup
Torque Control Tapholders
used to adapt different tapholders coupling dimensions.
3 types: Reductor 48/31 • Reductor 31/19 • Reductor 48/19
Rigid TapholdersRigid tapholders are best suited for getting tools like chamfers, drills, reamers or screwing devices.
Metric
M3 19/1 3,5 x 2,7 DIN 371M4 19/1 4,5 x 3,4 DIN 371M5 19/1 6 x 4,9 DIN 371M6 19/1 6 x 4,9 DIN 376M7 19/1 7 x 5,5 DIN 376M8 19/1 8 x 6,2 DIN 376M10 19/1 10 x 8 DIN 376M12 19/1 9 x 7 DIN 376M14 19/1 & 31/2 11 x 9 DIN376M16 19/1 & 31/2 12 x 9 DIN 376M18 31/2 18 x 14,5 DIN 376M20 31/2 16 x 12 DIN 376M22 31/2 18 x 14,5 DIN 376M24 31/2 & 48/3 18 x 14,5 DIN 376M27 31/2 & 48/3 20 x 16 DIN 376M30 31/2 & 48/3 22 x 18 DIN 376M33 48/3 25 x 20 DIN 376M36 48/3 28 x 22 DIN 376M39 48/3 32 x 24 DIN 376M42 48/3 32 x 24 DIN 376
Tap FittingDIN ø x
Coupl. ø Norm
Die thread holder
Different sizes according the diameter of the die or Metric size
M5-M6 ø19/1 100 mm.M8 ø 19/1 100 mm.M10 ø 19/1 120 mm.M12-M14 ø 19/1 150 mm.M16-M20 ø 31/2 150 mm
Tapping depthCoupl. ø
tool extension to reach difficult deep points
Helicoil fittings Coupling Size 19/1 Length = 80 mm.
Drill Chuck use those special stems according to size for helicoil inserts.available in Metric, uNC & uNF
Single solution for drilling soft materials without big drilling effort
TECNOSPIRO MACHINE TOOL, S.L.
P.I.Pla dels Vinyats I, C/B, nau 2
ES08250 – Sant Joan de Vilatorrada
Barcelona – Spain
Telf. +34 938764359 · Fax: +34938767738
E-mail: [email protected]
www.roscamat.com
©tE
CNoS
PIRo
Mac
hine
tool
S.L
.-Mod
ifica
tions
rese
rved
- Ed
ition
: Sep
tem
ber 2
013.
Dip
òsit
lega
l...
SINCE 1987, SIGNS OF OUR DUTY:We Design / We Manufacture / We Service ....
PASSION FOR QUALITY PRODUCTS