REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of...
-
date post
22-Dec-2015 -
Category
Documents
-
view
215 -
download
0
Transcript of REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of...
![Page 1: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/1.jpg)
REU Wednesdays at One:REU Wednesdays at One:
Scanning Probe Scanning Probe MicroscopyMicroscopy
June 30th, 2010
Susan EndersDepartment of Engineering Mechanics
![Page 2: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/2.jpg)
MicroscopMicroscopyy
Scanning ProbeScanning ProbeOptical Optical ElectronElectron
uses visible light and system of lenses to magnify
oldest and simplest design
new digital microscopes use CCD camera
magnification up to 2000 times
uses a particle beam of electrons to illuminate a specimen
create a highly- magnified image
uses electrostatic and electromagnetic lenses
magnification up to 2 million times
forms images of forms images of surfacessurfaces using a physical probe using a physical probe thatthat scans the specimenscans the specimen
surface image produced surface image produced byby mechanically moving mechanically moving probeprobe in a raster scan of thein a raster scan of the specimen and recordingspecimen and recording probe-surface probe-surface interactioninteraction as a function of positionas a function of position
atomic resolutionatomic resolution
was founded in 1981was founded in 1981
![Page 3: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/3.jpg)
AFM, atomic force microscope BEEM, ballistic electron emission microscope EFM, electrostatic foce microscope ESTM, electrochemical scanning tunneling microscope FMM, force modulation microscope KPFM, kelvin probe force microscope MFM, magnetic force microscope MRFM, magnetic resonance force microscope NSOM, Near-Field scanning optical microscope (or SNOM, scanning near-
field optical microscopy) PFM, Piezo Force Microscopy PSTM, photon sanning tunneling microscope PTMS, photothermal microspectroscopy/microscope SAP, scanning atom probe SECM, scanning electrochemical microscope SCM, scanning capacitance microscope SGM, scanning gate microscope SICM, scanning ion-conductance microscope SPSM, spin polarized tunneling microscope SThM, scanning thermal microscope STM, scanning tunneling microscope SVM, scanning voltage microscope SHPM, scanning Hall probe microscope
SPM Types SPM Types
![Page 4: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/4.jpg)
Scanning tunneling Scanning tunneling microscope - STMmicroscope - STM
powerful technique for viewing surfaces at the atomic levelpowerful technique for viewing surfaces at the atomic level invented in 1981 by Gerd Binnig and Heinrich Rohrer (at invented in 1981 by Gerd Binnig and Heinrich Rohrer (at
IBM Zürich)IBM Zürich) Nobel Prize in Physics in 1986Nobel Prize in Physics in 1986 probes the density of states of a material using tunneling probes the density of states of a material using tunneling
currentcurrent good resolution is considered to be 0.1 nm lateral good resolution is considered to be 0.1 nm lateral
resolution and 0.01 nm depth resolutionresolution and 0.01 nm depth resolution can be used not only in ultra high vacuum but also in air can be used not only in ultra high vacuum but also in air
and various other liquid or gas ambients, and at and various other liquid or gas ambients, and at temperatures ranging from near zero kelvin to a few temperatures ranging from near zero kelvin to a few hundred degrees Celsiushundred degrees Celsius
based on the concept of quantum tunnelingbased on the concept of quantum tunneling
![Page 5: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/5.jpg)
Classic “Tunnel Effect”
![Page 6: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/6.jpg)
Quantum Mechanics: Quantum Mechanics: The Tunnel EffectThe Tunnel Effect
![Page 7: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/7.jpg)
Using the Tunnel EffectUsing the Tunnel Effectfor Imagingfor Imaging
)exp(~ dIT Binnig & Rohrer, 1982, Nobel Prize in Physics 1986
![Page 8: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/8.jpg)
Using the Tunnel Effect Using the Tunnel Effect for Imagingfor Imaging
)exp(~ dIT
Binnig & Rohrer, 1982, Nobel Prize in Physics 1986
![Page 9: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/9.jpg)
pointe
échantillon
piezo-céramiquepm = 0.000000001 mm
Using the Tunnel EffectUsing the Tunnel Effect for Imagingfor Imaging
)exp(~ dIT
![Page 10: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/10.jpg)
movie: by courtesy of Dr. Dirk Sander, Max Planck Institute Halle, [email protected], www.mpi-halle.de
![Page 11: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/11.jpg)
2 inch
The Real Thing
![Page 12: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/12.jpg)
Surface of Au: atoms are visible!Surface of Au: atoms are visible!
![Page 13: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/13.jpg)
N. Knorr, A. Schneider Dept. Prof. Kern, MPI Stuttgart, Germany
Co atoms on a Copper surface
Atoms and Molecules at Atoms and Molecules at SurfacesSurfaces
4.2 Kelvin
![Page 14: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/14.jpg)
Moving Things AroundMoving Things Around
![Page 15: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/15.jpg)
Fe atoms on Cu (111)Fe atoms on Cu (111)
IBM Almaden , D. Eigler
![Page 16: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/16.jpg)
Fe atoms on Cu (111)Fe atoms on Cu (111)
IBM Almaden , D. Eigler
![Page 17: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/17.jpg)
D. Eigler & E. Schweizer, Nature 344, 524 (1990)
Xe / Ni(110)
![Page 18: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/18.jpg)
Atomic Force Microscope Atomic Force Microscope AFMAFM very high-resolution type of SPMvery high-resolution type of SPM resolution of fractions of a nanometer - 1000 times resolution of fractions of a nanometer - 1000 times
better than the optical diffraction limitbetter than the optical diffraction limit STM precursor to the AFMSTM precursor to the AFM Binnig, Ouate and Gerber invented the first AFM in Binnig, Ouate and Gerber invented the first AFM in
19861986 one of the foremost tools for imaging, measuring and one of the foremost tools for imaging, measuring and
manipulating matter at the nanoscalemanipulating matter at the nanoscale information is gathered by "feeling" the surface with information is gathered by "feeling" the surface with
a mechanical probea mechanical probe Piezoelectric elements facilitate tiny but accurate and Piezoelectric elements facilitate tiny but accurate and
precise movements enable the very precise scanningprecise movements enable the very precise scanning
![Page 19: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/19.jpg)
Cantilevers andCantilevers and their propertiestheir properties
Typically made of Typically made of
SiSixxNNyy
Spring constants Spring constants in the range of 1 - 40 N/m in the range of 1 - 40 N/m (Forces from 0,1nN – 20 (Forces from 0,1nN – 20
µN)µN)
Tips range from a pyramid Tips range from a pyramid to very to very
sharp, high aspect ratio sharp, high aspect ratio tips, to flat punches.tips, to flat punches.
J. E. Sader, Review of Scientific Instruments -- April 2003 -- Volume 74, J. E. Sader, Review of Scientific Instruments -- April 2003 -- Volume 74, Issue 4, pp. 2438-2443Issue 4, pp. 2438-2443
![Page 20: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/20.jpg)
Basic principle Basic principle cantilever with a sharp tip (probe) is used to scan the specimen surfacecantilever with a sharp tip (probe) is used to scan the specimen surface
tip is brought into proximity of a sample surface -> forces between tip and tip is brought into proximity of a sample surface -> forces between tip and sample lead to a deflection of the cantilever according to Hooke’s lawsample lead to a deflection of the cantilever according to Hooke’s law
forces measured in AFM include mechanical contact force, Van der Waals forces measured in AFM include mechanical contact force, Van der Waals forces, capillar forces, chemical bonding, electrostatic forces, magnetic forces, capillar forces, chemical bonding, electrostatic forces, magnetic forces, Casimir forces, solvation forces etc…forces, Casimir forces, solvation forces etc…
deflection is measured using a laser spot reflected from the top surface of deflection is measured using a laser spot reflected from the top surface of the cantilever into an array of photodiodes the cantilever into an array of photodiodes
if tip was scanned at a constant height -> risk that the tip collides with the if tip was scanned at a constant height -> risk that the tip collides with the surface -> damage -> feedback mechanism adjusts the tip-to-sample surface -> damage -> feedback mechanism adjusts the tip-to-sample distance to maintain a constant force between tip and sampledistance to maintain a constant force between tip and sample
sample is mounted on a piezoelectric tube which moves it sample is mounted on a piezoelectric tube which moves it zz direction for direction for maintaining a constant force, and maintaining a constant force, and xx and and yy for scanning for scanning
AFM can be operated in a number of modes, depending on the applicationAFM can be operated in a number of modes, depending on the application
possible imaging modes are divided into static (also called Contact) modes possible imaging modes are divided into static (also called Contact) modes and dynamic and dynamic
(or non-contact) modes where the cantilever vibrates(or non-contact) modes where the cantilever vibrates
AFM can be used to image and manipulate atoms and structures on surfacesAFM can be used to image and manipulate atoms and structures on surfaces
![Page 21: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/21.jpg)
Atomic Force Microscope (AFM)Atomic Force Microscope (AFM)
![Page 22: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/22.jpg)
Laser Beam DeflectionLaser Beam Deflection
![Page 23: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/23.jpg)
Laser Beam DeflectionLaser Beam Deflection
![Page 24: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/24.jpg)
Laser Beam DeflectionLaser Beam Deflection
![Page 25: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/25.jpg)
Imaging modesImaging modesStatic modeStatic mode the static tip deflection is used as a feedback signal measurement of a static signal is prone to noise
and drift -> low stiffness cantilevers used to boost the deflection signal
close to the surface of the sample, attractive forces can be quite strong -> tip 'snaps-in' to the surface
static mode AFM is almost always done in contact where overall force is repulsive
technique called 'contact mode‘ force between the tip and the surface is kept
constant during scanning by maintaining a constant deflection
![Page 26: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/26.jpg)
tip of the cantilever does not contact the sample surface
cantilever is oscillated at a frequency slightly above its resonance frequency (amplitude ~ few nanometers (<10nm))
van der Waals forces (strongest from 1nm to 10nm above surface)
or other long range force which extends above the surface acts to
decrease the resonance frequency of the cantilever
decrease in resonance frequency combined with feedback loop system maintains a constant oscillation amplitude or frequency by adjusting the average tip-to-sample distance
Measuring tip-to-sample distance at each (x,y) data point allows software to construct topographic image of sample surface
AFM does not suffer from tip or sample degradation effects
non-contact AFM preferable to contact AFM for measuring soft samples
in case of rigid samples, contact and non-contact images may look the same
Imaging modes -Dynamic Imaging modes -Dynamic modemode
![Page 27: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/27.jpg)
Advantages and Advantages and disadvantagesdisadvantages AFM provides a true 3D surface profileAFM provides a true 3D surface profile
samples viewed by AFM do not require special treatments samples viewed by AFM do not require special treatments
Most AFM modes work perfectly well in ambient air or even a liquid Most AFM modes work perfectly well in ambient air or even a liquid
Study of biological macromolecules and even living organismsStudy of biological macromolecules and even living organisms
gives true atomic resolution in ultra-high vacuum (UHV) and liquid gives true atomic resolution in ultra-high vacuum (UHV) and liquid environmentsenvironments
high resolution AFM is comparable in resolution to STM and TEMhigh resolution AFM is comparable in resolution to STM and TEM
disadvantage of AFM is image size (maximum height in disadvantage of AFM is image size (maximum height in m and maximum m and maximum scanning area around 150 by 150 scanning area around 150 by 150 m)m)
incorrect choice of tip for required resolution can lead to image artifactsincorrect choice of tip for required resolution can lead to image artifacts
relatively slow rate of scanning during AFM imaging often leads to thermal relatively slow rate of scanning during AFM imaging often leads to thermal drift in the image drift in the image
AFM images can be affected by hysteresis of the piezoelectric material and AFM images can be affected by hysteresis of the piezoelectric material and cross-talk between the (x,y,z) axes ->may require software enhancement cross-talk between the (x,y,z) axes ->may require software enhancement and filteringand filtering
filtering could "flatten" out real topographical features filtering could "flatten" out real topographical features
AFM probes cannot measure steep walls or overhangsAFM probes cannot measure steep walls or overhangs
![Page 28: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/28.jpg)
DualScope™ MicroscopeDualScope™ Microscope
Sample size: Ø 50 mmSample size: Ø 50 mm Sample height: 5 mmSample height: 5 mm
Scan size: 40 x 40 µmScan size: 40 x 40 µm Z range: 2.7 Z range: 2.7
µm µm
www.dme-spm.dk
![Page 29: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/29.jpg)
BearingBearing
www.dme-spm.dk
![Page 30: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/30.jpg)
Wooden FibresWooden Fibres
www.dme-spm.dk
![Page 31: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/31.jpg)
Landing Zone of Hard DiskLanding Zone of Hard Disk
www.dme-spm.dk
![Page 32: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/32.jpg)
MotheyeMotheye
www.dme-spm.dk
![Page 33: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/33.jpg)
Near-field scanning optical Near-field scanning optical microscope NSOM/SNOMmicroscope NSOM/SNOM nanostructure investigation that breaks the far field resolution nanostructure investigation that breaks the far field resolution
limit by exploiting the properties of evanescent waveslimit by exploiting the properties of evanescent waves
done by placing the detector very close (<< λ) to the done by placing the detector very close (<< λ) to the specimen surfacespecimen surface
allows for the surface inspection with high spatial, spectral and allows for the surface inspection with high spatial, spectral and temporal resolving powertemporal resolving power
resolution of the image is limited by the size of the detector resolution of the image is limited by the size of the detector aperture and not by the wavelength of the illuminating lightaperture and not by the wavelength of the illuminating light
lateral resolution of 20 nm and vertical resolution of 2-5 nm lateral resolution of 20 nm and vertical resolution of 2-5 nm has been demonstratedhas been demonstrated
contrast mechanism can be adapted to study different contrast mechanism can be adapted to study different properties (refractive index, chemical structure, local stress)properties (refractive index, chemical structure, local stress)
Dynamic properties can also be studied at a sub-wavelength Dynamic properties can also be studied at a sub-wavelength scale scale
![Page 34: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/34.jpg)
Operating PrincipleOperating Principleoptical microscopyoptical microscopy
1870 Ernst Abbe :1870 Ernst Abbe :
d > λ / (2sinθ)d > λ / (2sinθ)
dd = distance between the = distance between the two objectstwo objectsλλ = wavelength of the = wavelength of the incident lightincident light2θ2θ = angle through which = angle through which the light is collected. the light is collected.
best resolution with optical best resolution with optical light is about 200 nmlight is about 200 nm
![Page 35: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/35.jpg)
Operating PrincipleOperating PrincipleSNOMSNOM
if a subwavelength hole in a if a subwavelength hole in a metal sheet is scanned metal sheet is scanned close to an object, a super-close to an object, a super-resolved image can be built resolved image can be built up from the detected light up from the detected light that passes through that passes through the holehole
light passes through a sub-light passes through a sub-wavelength diameter wavelength diameter aperture and illuminates a aperture and illuminates a sample that is placed within sample that is placed within its near field (distance its near field (distance much less than the much less than the wavelength of the light)wavelength of the light)
achieved resolution is far achieved resolution is far better than conventional better than conventional optical microscopy optical microscopy
![Page 36: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/36.jpg)
Modes of OperationModes of Operation1) Transmission mode imaging - sample is illuminated through the probe - light passing through the sample is collected and detected2) Reflection mode imaging - sample is illuminated through the probe - light reflected from the sample surface is collected and detected3) Collection mode imaging - sample is illuminated with a macroscopic light source from the top or
bottom - probe is used to collect the light from the sample surface 4) Illumination/collection mode imaging - probe is used for both the illumination of sample and for collection of
reflected signal
![Page 37: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/37.jpg)
SNOM - LimitSNOM - Limit
Amount of light that can be transmitted by a small aperture poses a limit on how small it can be made before nothing gets thoughTo a degree this can be lived with, as more optical power can be generated, but the cutoff is so severe that it cannot be made smaller.
![Page 38: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/38.jpg)
Next Step Next Step Field Enhancement MicroscopyField Enhancement Microscopy
instead of using a small instead of using a small aperture, a metal tip is aperture, a metal tip is used to provide local used to provide local excitationexcitation
if a sharp metal tip is if a sharp metal tip is placed in the focus of a placed in the focus of a laser beam, an effect called laser beam, an effect called local field enhancement local field enhancement will cause the electric field will cause the electric field to become roughly 1000 to become roughly 1000 times strongertimes stronger
enhancement is localized enhancement is localized to the tip, which has a to the tip, which has a typical diameter of 10 nmtypical diameter of 10 nm
as this tip is scanned over as this tip is scanned over the surface, an image can the surface, an image can be formed with a resolution be formed with a resolution as fine as the tip as fine as the tip
![Page 39: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/39.jpg)
Julien Toquant, University of Basel
Optical scans made with BioLyser SNOM
Shear Force Imaging
Bovine Kidney Cells, non-contact mode: 10 µm scan
3D view of Bovine Kidney cell sample
Aluminum projection pattern on glas
![Page 40: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/40.jpg)
SPM AdvantagesSPM Advantages
resolution not limited by diffraction, but only by the resolution not limited by diffraction, but only by the size of the probe-sample interaction volume ( few size of the probe-sample interaction volume ( few picometers)picometers)
ability to measure small local differences in object ability to measure small local differences in object height (like that of 135 picometre steps on <100> height (like that of 135 picometre steps on <100> silicon)silicon)
probe-sample interaction extends only across the tip probe-sample interaction extends only across the tip atom or atoms involved in the interactionatom or atoms involved in the interaction
interaction can be used to modify the sample to interaction can be used to modify the sample to create small structures (nanolithography)create small structures (nanolithography)
do not require a partial vacuum but can be observed do not require a partial vacuum but can be observed in air at standard temperature and pressure or while in air at standard temperature and pressure or while submerged in a liquid reaction vessel. submerged in a liquid reaction vessel.
![Page 41: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/41.jpg)
SPM DisadvantagesSPM Disadvantages
detailed shape of the scanning tip difficult to detailed shape of the scanning tip difficult to determine (effect particularly noticeable if the determine (effect particularly noticeable if the specimen varies greatly in height over lateral specimen varies greatly in height over lateral distances of 10 nm or less) distances of 10 nm or less)
generally slower in acquiring images due to the generally slower in acquiring images due to the scanning processscanning process
embedding of spatial information into a time embedding of spatial information into a time sequence leads to uncertainties in metrology sequence leads to uncertainties in metrology (lateral spacings and angles) which arise due to (lateral spacings and angles) which arise due to time-domain effects like specimen drift, feedback time-domain effects like specimen drift, feedback loop oscillation, and mechanical vibration loop oscillation, and mechanical vibration
The maximum image size is generally smallerThe maximum image size is generally smaller not useful for examining buried solid-solid or liquid-not useful for examining buried solid-solid or liquid-
liquid interfaces liquid interfaces
![Page 42: REU Wednesdays at One: Scanning Probe Microscopy June 30 th, 2010 Susan Enders Department of Engineering Mechanics.](https://reader030.fdocuments.in/reader030/viewer/2022032706/56649d7a5503460f94a5dac4/html5/thumbnails/42.jpg)
The EndThe End