Retrofitting the SW150 Mark II to the Original SW150
4
Retrofitting the SW150 MkII Lightshield to original SW150
-
Upload
broadside-interactive -
Category
Technology
-
view
31.770 -
download
2
Transcript of Retrofitting the SW150 Mark II to the Original SW150
Retrofitting the SW150 MkIILightshield to original SW150
Clip the grooved (cutaway) edge of the Lightshield underneath the rear filter slot on one side of the holder.
Retrofit Lightshield1
Repeat the same to the opposite side of the holder. The Lightshield should now be firmly clipped in place.
Retrofit Lightshield2
Once in place the Lightshield can stay permanently attached to the holder.
Retrofit Lightshield3