Mounting Instructions

Retractable Cable Reel 801/20R

22980 Instruction_F128002 80120R_RetractableCableReel_A6.indd 1 29/04/2011 12:18:03 PM

801/20R Retractable Cable Reel Installation Instructions

© 2011 Schneider Electric. All Rights Reserved.

Clipsal 801/20R Retractable Cable Reel

The Clipsal 801/20R Retractable Cable Reel is designed and manufactured to give you many years of reliable service.

The locking device (ratchet and pawl), which is located inside the unit, is designed to function by gravity, eliminating the need for springs and lubrication, etc.

Wall Mounting

The most common location for the 801/20R is on a wall. To position the reel as per Figure 1, two aluminium angle brackets need to be securely fixed to the wall.

Figure 1. Wall Mounting

22980 Instruction_F128002 80120R_RetractableCableReel_A6.indd 2 29/04/2011 12:18:03 PM

801/20R Retractable Cable Reel Installation Instructions

© 2011 Schneider Electric. All Rights Reserved.

Clipsal 801/20R Retractable Cable Reel

Fixing the Wall Mounting Bracket

The wall mounting bracket consists of three parts, two pre-drilled angle brackets and the tube. Four fasteners are required to fix the brackets into position. Fix in position one of the two angle brackets, making sure that the heals of the brackets face into each other as shown in Figure 2.

The second angle bracket should be fixed in position 320mm from the inside of the first bracket. The reel can then be positioned between the two brackets and the tube passed through the holes in the brackets and the castellated section of the black base frame.

Finally, fit the split pins through the pre-drilled holes in each end of the tube to ensure that all parts are securely locked into position.

NOTE: SuiTablE fOr OvErhEad cEiliNg mOuNTiNg.

cat. No. description I cable length

801/20R 240V 10A Retractable Cable Reel

10A coiled and uncoiled

20 metres

Specifications

22980 Instruction_F128002 80120R_RetractableCableReel_A6.indd 3 29/04/2011 12:18:03 PM

F1280/02 CLIPCOM 22980 April 2011

Clipsal Australia Pty Limited reserves the right to change specifications, modify designs and discontinue items without incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error therein.

© 2011 Schneider Electric. All rights Reserved. Trademarks are owned by Schneider Electric Industries SAS or its affiliated companies.

Clipsal Australia Pty Limited

Contact us: clipsal.com/feedback

National Customer Care Enquiries:

Tel 1300 2025 25 Fax 1300 2025 56

22980 Instruction_F128002 80120R_RetractableCableReel_A6.indd 4 29/04/2011 12:18:03 PM