KENNETH THOMPSON4862 W Elaine Drive, West Valley City, UT 84120 ♦ Mobile: (315) 527-1724♦

♦ Email: brotk2001@yahoo.comSummary Over 13 years of pipefitting experience. Proven ability to follow instructions, specifications and blueprint readings. Familiar with Naviswork software and AutoCAD for piping software systems. Excellent knowledge of the principles, methods and techniques in the pipefitting trade. Profound knowledge of tools and equipment of the pipe and welding skill trade and safety practices. Deep knowledge of the occupational hazards and safety precautions of the trade. Strong ability to plan and perform work involving the installation, modification and repair of new and

existing piping systems.

Education/CertificationsOSHA 30 & OSHA 10 2015NITC JOURNEYMAN/PIPEFITTER CERTIFICATION 2015MSHA/OSHA CERTIFIED 2015NCCER CERTIFIED PLUS JOURNEYMAN FITTER 2014 TWIC/ RSO 2010UA LOCAL UNION 250 JOURNEYMAN/FITTER 2007WELL SERVICES DRILLING SCHOOL (Floorman/Rostabaut) 1996

Professional Experience7/2015 to Present: Lauren Engineering (Holly Refinery)-Wood Cross, UT

Journeyman Pipe Fitter• Responsible for laying out and setting equipment for process pipe installation.• Drawing isometrics for over a 100 client updates and progress.

3/2015 to 6/2015: Micron IM Flash-Lehi, UT Journeyman Pipe Fitter• Responsible for laying out and setting equipment for process pipe installation.• Drawing isometrics for client updates and progress.

7/2014 to 3/2015: Brahma Group (CC & V Mine)–Cripple Creek, CO Piping General Foreman• Responsible for building piping packages and drawing as builds for RFI’s.• Accountable for managing and issuing material and mechanical components to foreman and recording

progress of spools and supports being erected.• Laid out full scale drawings of pipe systems, supports, and related equipment, following blueprints. • Initiating hydro static test on all spools built on site and recording and tracking heat trace

footage on process piping. 9/2013 to 6/2014: Plant Performance Services (Tesoro Refinery) - Salt Lake

City, UT

Journeyman Pipefitter & Material Coordinator• Received Equipment and sort materials for VRU Expansion Project.• Obtained equipment and categorized materials for the Crude Unit Expansion as well.• Accountable for monitoring and storage of equipment and materials.

10/2012 to Present: Brahma Group (KUC-MAP) Magna, UT Journeyman Pipefitter• Laid out full scale drawings of pipe systems, supports, and related equipment, following blueprints. • Layout cut and prepare pipe for isometric drawings issued for construction. • Cut, threaded, and hammered pipe to specifications, using tools such as saws, cutting torches, and pipe

thread.• Measured and marked pipes for cutting and threading. • Laid out full scale drawings of pipe systems, supports, and related equipment, following

blueprints.9/2012 to 10/2012: Fagan Inc. (KUC-MAP) Magna, UT

Journeyman Pipefitter• Laid out full scale drawings of pipe systems, supports, and related equipment, following blueprints. • Layout cut and prepare pipe for isometric drawings issued for construction. • Cut, threaded, and hammered pipe to specifications, using tools such as saws, cutting torches, and pipe

thread.• Measured and marked pipes for cutting and threading. • Laid out full scale drawings of pipe systems, supports, and related equipment, following

blueprints.11/2011 to 8/2012: P2S World (Tesoro Refinery) Kapolei, HI

Journeyman Pipefitter Laid out full scale drawings of pipe systems, supports, and related equipment, following blueprints. Layout cut and prepare pipe for isometric drawings issued for construction. Cut, threaded, and hammered pipe to specifications, using tools such as saws, cutting torches, and pipe

thread.08/2011 to 10/2011: Fagan (Nack Power) Cushing, TX

Pipefitter Administered and laid out crews for installation of utility piping and process systems piping which

included chill water, condensate water, low pressure steam, compressed air and high pressure steam. Installation of piping and fabrications of supports for process pipe systems.

04/2011 to 08/2011: Aerotek (Leprino Foods) Greeley, CO General Foreman Managed and laid out crews for installation of utility piping and process systems piping which will

include chill water, condensate water, low pressure steam, compressed air and high pressure steam. Installation of piping and fabrications of supports for process pipe systems.

03/2011 to 04/2011: Starcon Int’l (Conoco Phillips Turnaround) Concord, CA Pipefitter Laid out full scale drawings of pipe systems, supports, and related equipment, following

blueprints.

Layout cut and prepare pipe for isometric drawings issued for construction. Cut, threaded, and hammered pipe to specifications, using tools such as saws, cutting torches,

and pipe thread.11/2010 to 02/2011: S & B Engineering Contractors (Shell Motiva) Port Arthur, TX

Pipefitter Laid out full scale drawings of pipe systems, supports, and related equipment, following

blueprints. Layout cut and prepare pipe for isometric drawings issued for construction. Cut, threaded, and hammered pipe to specifications, using tools such as saws, cutting torches,

and pipe thread.