Kalpeshwar R Veer : +91-7045067589/ 9730478948 Sr. No.49A, Swapnapurti : kalpesh.veer@gmail.comNiwas, Hadapsar, Pune-411028 Maharashtra.

Carrier Objective:To succeed in an environment of growth and excellence and earn a job which provides me job Satisfaction and self development and help me achieve personal as well as organization goals.

Qualification:

BE Electrical from Pune University.Professional In EPC Projects & Electrical Design.

Work Experience: Total 5.6 Years Current Organization : Pentair Thermal Management, Mumbai: (9th March 2015-Till date):

Company profile: Pentair delivers industry-leading products, services and solutions for its customers’ diverse needs in water and other fluids, thermal management and equipment protection. With 2015 revenues of $7.0 billion. Pentair employs approximately 30,000 people worldwide.Position: Design Engineer

Job Responsibilities:

Preparation of Electrical Load List, Transformer Sizing Calculation, Preparation of Cable Schedule, SLD Preparation, Hazardous Area Classification,

Electrical Equipment Layout. Vendor documents reviews, Coordination with vendors, Technical Bid analysis for

various electrical equipments.. P&ID & Isometric review to define design scope. Selection of heating cable, heating system, controllers, JB & RTD placement. Heat Tracing calculations for piping & instruments.

Previous Employments: Fabtech Projects & Engineers Limited (EPC), Pune: ( 2nd Aug 2013 to 5th March 2015)

Position: Project Engineer ( E & I, Oil & Gas)

Job Responsibilities:

Understanding the scope of Work/Supply/Services from Tender document. Planning and Coordination of Project Engineering activities as per work order. Coordination between Consultants/Vendors/Contractors/End Users. Preparation & Review of electrical design documents like load list, Transformer Sizing

Calculations, Single Line Diagrams(SLDs), HT & LT Power Cable Sizing, Cable Schedule, equipment sizing, Switchgear Selection etc.

Preparation of Equipment Layout, Earthing layout, Cable routing layout, Illumination Layout, lightning protection layout etc.

Responsible for getting Drawing/documents approval from Consultant in defined standard document format provided by PMC consultant for Electrical & Instrumentation systems.

Responsible for Submission of documents to Consultant on time for approval. Procurement of electrical equipment, including preparation/review of datasheets,

1 of 3

requisitions, carrying out technical bid evaluations, review of vendor documents, expediting. Preparation of Project progress reporting on Weekly & Monthly basis for submission to

Client/PMC at Monthly Review Meeting. Monitor & control the site production/Quality activities. Overall Documentation of Project.

Working on below mentioned Project` which includes Engineering, Procurement, Installation & commissioning activities:

01. Project - Construction of POL Depot (Storage Tankages) End User - Indian Oil Corporation Ltd, Imphal, Manipur PMC Consultant - Indian oil Tanking Design & Engineering, Kolkata Roles & Responsibilities - Taken the Whole responsibility of Electrical/Instrumentation Systems & Other package system such as PA & Paging system.

Previous Employments:2 years experience in Electrical Design (Ash Handling system) at Tecpro Systems Ltd. Pune (EPC) as an Electrical Design Engineer from 1st Aug 2011 to 1st Aug 2013.

Job Responsibilities:

Experienced in Electrical Calculations like Load List, Transformer sizing calculations, Bus bar sizing, and HT & LT Cable sizing calculation, Earthing & Lightning protection calculation , Illumination calculation and Cable Schedule.

Co-ordinate with inter departments, customer, consultants and vendors etc. Preparation of electrical layouts drawings like Electrical equipment layout,

Lightning protection system, Plant Illumination, Earthing & Cable tray Layout. Review of vendor Data sheets, Sizing calculation, GA drawings & QAP & improving the

service feasibility. Knowledge of IS, IEC & IEEE standards. Procurement of electrical equipment, including preparation/review of datasheets,

requisitions, carrying out technical bid evaluations, review of vendor documents, expediting.

Working on below mentioned Projects simultaneously which includes Engineering, Procurement, Installation & commissioning activities:

01. Project - Sholapur Super Thermal Power Plant (2 x 660MW) End User - NTPC, Sholapur Roles & Responsibilities - Electrical Design & Procurement of BO items. 02. Project - Meja Thermal Power Plant (2 x 660MW) End User - NTPC, Chhattisgarh Roles & Responsibilities - Electrical Design & Procurement of BO items.

03. Project - IOTL Thermal Power Plant (2 x 150MW) End User - IOT Maruti Roles & Responsibilities - Electrical Design & Procurement of BO items.

Industries Exposure:

2 of 3

Oil & Gas sector, Power Sector.

Overview: Completed Bachelors in Engineering (Electrical with distinction) from Pune University in 2011 Hands on experience in AutoCAD software,Photolux, Proman, Tracer Lynx,

TC pro, MS Project, Primavera etc.

Academic details

DEGREE NAME OF INSTITUTE UNIVERSITY/BOARD YEAR OF PASSING %

B.E. (ELECTRICAL) JSPMS PUNE UNIVERSITY 2011 69H.S.C R.R. SHINDE JR.COLLEGE MAHARASHTRA BOARD 2007 72S.S.C. SADHANA VIDYALAYA MAHARASHTRA BOARD 2005 80

Passport Details:

Passport Number : K9933901 Date of Issue : 10/04/2013 Date of Expiry : 09/04/2023

Personal Profile: Date of Birth : 2nd November 1989 Sex/ Marital Status : Male / single Nationality : Indian Languages Known : English, Hindi, Marathi Current Location : Pune, Maharashtra

3 of 3