Cover Letter

David MilnePH: 040 744 1680

E-Mail: justpersevere@bigond.com

To Whom It May Concern

I am writing to express my interest in a position as An Advanced Rigger at Cape Preston. I am currently working with Monadelphous at Cape Preston and my Supervisor Brett Peterson is aware I have applied for a permanent role with Citic Pacific Mining.

I have experience in the Mining, Oil and Gas Construction Industry since 1996. I have a good grasp on what goes on and require no supervision to start or complete a task. I enjoy the continuous variations of every day working in this industry. “Best job I’ve ever had”

I am excited about the opportunity to work in a role that supports my interests and where I feel I can add value. I believe in continuous personal improvement and Safety is of high importance.

I have attached a detailed copy of my resume and I look forward to hearing from you if you feel I’m suited for this role or another.

Thank you in advance for your time

Kind Regards

David Milne

Resume for David James Milne, Mob: 040 744 1680 Page 1 of 8

R E S U M E

David Milne36 Alnwick Turn Landsdale

Perth 6065 Home: 62 013 184

Mobile: 040 744 1680

justpersevere@bigpond.com

LICENCES

- C (Car)- HR - Heavy Vehicle Driver’s Licence

WorkSafe Licences (Licence to Perform High Risk Work)

- DG - Dogging - RA - Advanced Rigging- WP - Elevating Work Platform - FL - Forklift Truck Operation- CN – non slewing crane 25t Franna- CV – vehicle mounted crane eg Hiab

Other- Working Safely at Heights

SAFETY INDUCTIONS

- Current Construction Card – White Card- Mine Employees Health Surveillance Card- MSIC Card (Expired)- Maritime Security Identification Card

TRADE SKILLS

- Experienced, safe and competent Advanced Rigger in a variety of industries

- Strong problem solving and communication skills- Organising, planning, and problem-solving skills- Always thinking of a better way – invented the Gridhook grid mesh lifter

and The Riggers Pen- Take pride in my abilities and quality of work I produce- Good knowledge of construction, mining, oil and gas industry

operations

TRADE SKILLS Continued….

Resume for David James Milne, Mob: 040 744 1680 Page 2 of 8

- Good level of mechanical aptitude- Worked with a variety of wheel and tracked mounted cranes- Ability to work with and alongside other trades and people from all walks of life- Honest enthusiastic, reliable and punctual worker- Always wanting to keep busy, always wanting to learn something new- Always happy and positive “The best job I’ve ever had”

EMPLOYMENT HISTORY

Company: Monadelphous

Date: 10th February 2015 – Currently still employed Site: Cape Preston

Position: Advanced Rigger

Key responsibilities:

- Working alongside the heavy lift crew- Following lift studies and rigging for critical lifts- Installation of structural steel, mechanical and piping equipment - Reading and interpreting isometric drawings/plans for installation of

structural steel and mechanical equipment - Understanding, following and using CPM lock out procedures- Organising work sequence and planning team members to carry out

the tasks- Working at heights from EWP Genie and JLG 80,135 & Scaffold

structures- Writing JHA ‘s and Good to Go

References: Brett Peterson – 0419 392 093

Resume for David James Milne, Mob: 040 744 1680 Page 3 of 8

EMPLOYMENT HISTORY Continued….

Company: Civmec

Date: 18th August 2014- 23rd December 2014 Site: Yandi

Position: Advanced Rigger

Key responsibilities:

- Reading and interpreting isometric drawings/plans for installation of structural steel and mechanical equipment

- Organising work sequence and planning team members to carry out the tasks

- Structural steel erection and mechanical, piping equipment installation- Following lift studies and rigging for critical lifts- Working at heights from EWP Genie z60,80,125 & Scaffold structures- Writing JHA ‘s and take five’s

References: Neil Paramenter – 042 080 7991

Company: Toll

Date: 13th August 2012 – 24th July 2014 Site: Barrow Island

Position: Advanced Rigger

Key responsibilities:

- The crane crew is a specialized team that unloads barges of all types. We Unload and backload all incoming and outgoing construction material and machinery that arrive on barges to Barrow Island from Australia and oversea vessels. E.g. Miss Hannah is a barge with a Favco M2480D 330T on her deck on tracks. We also dog for international vessels which have their own ship cranes.

- We have multiple work fronts with barges moored and at times have to be fixable to move between these work area during the day and night.

- The crane departments fleet consist of these mobile cranes Liebherr LTM 1250, grove 130T, tadanao 65T all terrain, franna MAC 25, crawler cranes demag CC2500 500T, sumitomo 280T and a tower

Resume for David James Milne, Mob: 040 744 1680 Page 4 of 8

crane favco M2480D 330T, plus the barge mounted favco M2480D 330T and a Liebherr LHM550 144T

- I enjoy working with Toll on Barrow Island it is definitely a special environment

- Working at heights from EWP Genie z60,80,135 - Writing JHA ‘s and take five’s- Rigging multiple loads using assortment of lifting equipment eg 60t

Stinis bar, 145t Bolt connected Pipe Maxi Bar spreader, 100t versa bar pipe spreader, 60t telescopic spreaders, H patterns and I could go on….

- Following and rigging for critical lifts

References: Doug Maccarthy – 040 203 4471

Company: AGC

Date: 17th August 2011- 8th August 2012 Site: Kararra

Position:Advanced Rigger

Key responsibilities:

- Gather, measure, transfer elevations and set horizontal levels during building construction with the use of A dumpy Level

- Reading and interpreting isometric drawings/plans for installation of piping, structural steel and mechanical equipment

- Structural steel erection and mechanical equipment installation for two Metso Jaw crushing plants, Benification building and Emergency reclaimer

- Working at heights from EWP Genie z60,80,125 & Scaffold structures- Writing JHA ‘s and take five’s

References: Gareth Winn – 0417 870 211 Ivan Bryant – 0403 822 214

Resume for David James Milne, Mob: 040 744 1680 Page 5 of 8

EMPLOYMENT HISTORY Continued….

Company: Cimeco

Date: 6 January 2011 – 16th June 2011 Site: Ravensthorpe

Position:Advanced Rigger

Key responsibilities:

- Gather, measure, transfer elevations and set horizontal levels during building construction with the use of A dumpy Level

- Reading and interpreting isometric drawings/plans for installation of piping, structural steel and mechanical equipment

- Structural steel erection and mechanical equipment installation for two Metso Jaw crushing plants, Benification building and Emergency reclaim

- Working at heights from EWP Genie z60,80,135 & Scaffold structures- Writing JHA ‘s and take five’s

References: Ivan Bryant – 0403 822 214Gareth Winn – 0417 870 211

Company: CSI – Crushing Services International

Date: 18th August 2010 – 14th December 2010 Site: Christmas Creek

Title: Advanced Rigger

Key responsibilities:

- Installation/erection of structural steel and mechanical equipment for crushing plant

- Dual crane lifts- Heavy lifts – Serge bins, Screens, Trommels, Conveyors - Working at heights from EWP and in man cage - Reading drawings- Liaising with Structural supervisors and leading hands

References: Neil Anderson – 448 224 088Gareth Winn – 0417 870 211

Resume for David James Milne, Mob: 040 744 1680 Page 6 of 8

EMPLOYMENT HISTORY Continued….

Company: Good Line

Date: 11th July 2010 – 9th August 2010

Site: Port Headland, Utah Point Berth Project

Position: Advanced Rigger (Term of Project)

Key responsibilities:

- Erecting workshops and conveyor transfer towers- Conveyor installation- Heavy lifts – Unloading trucks for site installation - Working at heights from EWP and in man cage - Reading drawings- Liaising with Structural supervisors and leading hands

References: Simon Johnson, Supervisor – 0458 730 123

Company: Freo Cranes

Date: 30th October 2008 – 8th July 2010

Site: Various sties in Metropolitan Perth and North West

Position: Advanced Rigger/Crane Operator

Key responsibilities:

- Dogging and rigging for cranes up to 500 ton, dual and heavy lifts

- Dual crane lift with two 500’s- Dogging triple crane lift- Demolition of factories and Silos- Putting up Silos and their framework- Operating Franna and 10T Tom Thumb, lifting buildings,

construction framework, various construction materials and equipment- Shut Downs at Ti-west Cooljaloo, Chandala, BHP –

Kalgoorlie, Telfer

Resume for David James Milne, Mob: 040 744 1680 Page 7 of 8

References: Mel Schischka, Crane Supervisor – 0447 981 011 Dean Boaler, Crane Operator 0410 990 612ADDITIONAL EMPLOYMENT AND SKILLS

I started working in the mining industry in 1996 in logistics. While working in this industry I operated forklifts of many different sizes unloading lots of freight and large items including vehicles and mechanical equipment. I also have a CN crane ticket for a frana which was very valuable as I could unload freight without requiring using other skilled personal to come and assist.

I also drove as a courier around Perth in a truck for many years with a HR licence. Driving road range gear boxes and synchronised.

I am a very flexible employee who doesn’t complain. I enjoy working and will find something to do if left alone for 5 minutes. I am always looking forward when working and will try to make a task safer, easier quicker.

I am a director of my own small company, to manage some inventions my mentor and I came up with. First was The Riggers Pen and second The GridHook – Grid Mesh Lifter. We have been managing the Gridhook since October last year and it gives me great pride to give this industry a better safe working practice when removing or installing grid mesh. This is our retirement employment my friend and I joke about. www.theriggerspen.com.au

Thank you for taking the time to read my resume and I hope with can meet in person for further negotiations of employment.

Kind RegardsDavid Milne

Resume for David James Milne, Mob: 040 744 1680 Page 8 of 8