Water Technologies

Control Systems

Your CompleteResource For WaterAnd WastewaterControl

For further information please contact:

Siemens Water Technologies1239 Willow Lake BoulevardVadnais Heights, MN 55110800.224.9474 toll free 651.766.2700 phone651.766.2701 fax controlsystems.water@siemens.com

Website: www.siemens.com/water

© 2006 Siemens Water Technologies Corp.

Order No: CS-GC-BR-1206Subject to change without notice.

IntraLink, Powerpack and Microcat are trademarks of Siemens, its subsidiaries or affiliates.UL is a trademark of Underwriter’s Laboratories, Inc. NEMA is a trademark of NationalElectrical Manufacturers Association.

The information provided in this brochure contains merely general descriptions orcharacteristics of performance which in actual case of use do not always apply asdescribed or which may change as a result of further development of the products. Anobligation to provide the respective characteristics shall only exist if expressly agreed inthe terms of the contract.

Water and wastewater treatment and process technologies continue to

improve. To take advantage of their full potential requires control and

telemetry systems that are robust, agile and adaptable. Control Systems

provides exactly such systems. We also make available to you the

experience and insights of some of the industry’s ablest designers,

engineers and technicians – all with the common goal of creating the

most versatile, dependable and user-friendly control systems possible.

Control Systems, has decades of experience in developing,

manufacturing and integrating control products for the water,

wastewater and process industries.

To keep current with changes in technology, we maintain a continuing

research and development program where we find new and better ways

to engineer our solutions. Along with that, we keep abreast of

developments in the field where we learn about the possibilities – and the

limitations – of other technologies. As a result, we can select technologies

from multiple sources and integrate them smoothly into a unified, cost-

effective system.

That’s what makes Control Systems the trusted resource for the answers

you need to exercise complete control of your water and wastewater

treatment systems now and into the future.

Siemens Water Technologies is prepared to help your community provide and maintain a safe, reliable water supply or wastewater treatment system.

From total system

integration to a single

transducer, we can help.We never stop looking for ways to improve water and wastewater control.

21

Control Systems is a major national supplier and

system integrator of control and telemetry systems

for municipal and industrial water, rural water and

wastewater utilities. The thousands of telemetry

and SCADA applications we've designed, built and

installed for municipalities of all sizes domestically

and internationally, give testimony to our

commitment to the industry we serve.

Our designers have access to the widest possible

array of technologies and broad experience in

integrating them to produce optimum SCADA

systems including:

• Water and wastewater treatment facility automation

• Water distribution monitoring and control

• Collection system monitoring and control

• Water irrigation systems

• Wastewater effluent and re-use systems

COMMONLY USEDHARDWARE AND

SOFTWARE MANUFACTURERS

Siemens

Allen-Bradley

Modicon

GE

Total system control of

all your community’s

water resources.Control Systems has the experience and resources tocomplete complex integrations.

43

Programmable Logic Controllers

Siemens

Allen-Bradley

GE

Square D

Cutler Hammer

Magnetek

Robicon

Toshiba

Saftronics

Danfoss

Motor Control/Variable Frequency Drives

Siemens Win-CC

Honeywell Experion

Wonderware

Rockwell RS View

Citect

Intellution

GE Cimplicity

Human/Machine Interface Software

Dataradio

EF Johnson

Motorola

MicrowaveData Systems

Dataline

Metricom

Maxon

Radio Equipment

Superior Engineering

To deliver a truly great solution to a control problem requires specialists in several disciplines to

bring their expertise to bear. Our design and integration teams are made up of these kinds of

experienced professionals including:

• Registered professional electrical engineers • Computer science engineers

• Radio system specialists • Software design and application programmers

• Project managers • Communication technicians

• Hardware design engineers

Our relationships with consulting firms along with hardware and software suppliers provide our

staff with exposure to a broad range of design concepts and system architectures.

There are many existing technologies for monitoring and controlling water

and wastewater systems, each with unique and distinct advantages. We take

note of these when we design hybrid solutions to provide a truly scalable,

open architecture environment for your water, wastewater, process and

telemetry systems.

Our commitment to open systems means that you will not be tied to specific

suppliers. Products from multiple vendors can be integrated into flexible,

functional systems without custom hardware, software or tools. Existing

infrastructure will be able to blend smoothly with future product improvements.

Superior Products

We have both time-tested and newly developed technologies produced through

our own R&D efforts that are ideal for their respective applications. We also use

the products of other equipment suppliers wherever they offer distinct

advantages. Our constant goal is to provide you with the best combination of

products for your application. Our IntraLink™

family of products for example, was

developed to provide flexible, reliable performance and convenience through

free network topology and open communication protocols. The foundation of

this family is the LC3000 which can be networked with other modules through a

variety of media resulting in dramatic savings in wiring costs and complexity.

Superior Service and Support

With an internal field service group as well as a nationwide network of factory-

authorized service personnel, all elements of our systems will get fast, expert

attention. We are also supported by the financial strength and staying power of the

world’s largest water treatment technologies companies. Our field services include:

• Complete system diagnostics

• Scheduled or emergency service

• Field startup

• Acceptance testing and demonstration

• Basic or extended warranty contracts

• Instrumentation calibration and commissioning

• Technical support hotlines, 24/7/365

The new IntraLink LC3000 is specificallydesigned for municipal and industrialwater treatment and distribution,wastewater collection, re-use andtreatment, water reclamation and ruralwater supply systems

The WS2000 web server connects to theLC3000 controller, creating an easy-to-use,web-enabled, economical HMI solution.Distributed data includes 3D graphics,trends, alarms and reports.

Leading the way in

integrating open

architecture solutions.Total system control with openconnectivity.

65

Given the wide range of systems Control Systems designed and

built, chances are we’ve already installed one very much like what

you might be contemplating.

We can design and implement a telemetry solution using industry

standard PLCs, open architecture PLC's designed specifically for

water/wastewater (i.e. Control Systems LC3000), or “smart” remote

terminal units (RTUs) from our original family of products which

includes the former Autocon, Consolidated Electric and Dynamic

Systems brands. We can also incorporate Control Systems input

sensors and redundant controllers as well as other manufacturers’

products to create a solution that perfectly matches your needs.

This variety of communication options lets us tailor a fast,

economical and secure communication system that can include:

• FCC license procurement for radio communications (VHF, UHF, 900 MHz)

• 800 MHz trunked radio

• Spread spectrum radio

• Wireless ethernet

• Dedicated and dial-up telephone lines

• Local and wide area information networks

• Hard wired line drivers, buried cables, etc.

• UTP, STP, coax and fibre optic cable

• Cable TV networks

• Cellular

Telemetry solutions from Siemens Water Technologies,keep you informed of the operational details of your sys-tem and enable rapid response.

Your Control Systems service and supportteam is ready to respond immediately toyour needs.

Whether you have a question about a single Control Systems

product or need a comprehensive systems integration plan,

we have the professionals to satisfy that need quickly and

completely. We monitor the performance of your system

through our

factory direct

service

organization or

our nationwide

network of service

providers and

representatives.Field engineers can access systemoperating data using PDAs.

Optimizing telemetry

for effortless

communication

and control.We deliver communicationssolutions that are fast, secureand economical.

87

Our services include:

• Complete system troubleshooting/diagnostics

• Scheduled/emergency field service

• Field startup

• Training

• Service contracts or extended warranties

• Instrumentation calibration and commissioning

• Radio topographic path analysis

• Radio signal strength analysis

• Technical support hotline

• Dial-up software technical support

• 24/7/365 coverage

Control Systems

products are adaptable,

versatile and

dependable.

109

LEGACY PRODUCTSLegacy products, Autocon Microcat®, Consolidated Electric and Dynamic Systemsprojects are supported and upgrades/replacement/new systems can be seamlessly integratedwith Control Systems IntraLink family of products.

INTRALINK™ LC3000/LC2000Our new IntraLink™ family of products LC3000/LC2000 are technologically advanced PLC’sspecifically engineered for water and wastewater applications. We have applied all of ourcontrol and telemetry experience, coupled with our industry leading professional andtechnical skill, to produce this new family of products. This platform of open architecturePLC’s supports industry standard open protocols via 6 built in communications portsincluding on-board Ethernet and complies with all five popular ISA 61131 programmingstandards (including ladder logic and function blocks). The flexibility and scalability providedby the IntraLink™ system allows for an efficient, comprehensive solution capable of being akey component in the simplest to the most complex water and wastewater applications.

INTRALINK™ WS2000The IntraLink™ WS2000 is a low cost HTML based HMI (Human Machine Interface) providedin a panel mounted hardware package. The HMI provides a variety of preconfigured screensand reports using configurable data points. These points can be tagged to anLC3000/LC2000 PLC or a variety of other PLC hardware platforms via Standard ModbusCommunications interface. The HMI package offers graphical displays of system parameters,alarm management, trending, data storage, reports and alarm transmission. The unit can beinterfaced via Internet access, can be directly accessed by remote laptop via POTS dial up line,or the unit can be networked into an existing LAN allowing simultaneous multi-user access.

INTRALINK™ OPERATOR INTERFACEThe IntraLink™ Operator Interface is an economical graphical interface, tightly integratedwith the LC3000/LC2000 PLC’s. User-friendly menus allow an operator to easily navigatethrough process screens, alarm screens, historical alarm and event data, trending displays anddiagnostic screens. The display can be fix mounted on any NEMA 1, 12 or 4 rated panel. Thedisplay can also be used as a portable device for connection to remote units without a fixeddisplay. The high contrast back lit display provides superior visibility in all lighting conditions.

INTRALINK™ LC150 PUMP CONTROL-TELEMETRY UNITThe IntraLink™ LC150 Pump Control-Telemetry Unit is designed specifically for pumpstation applications and offers a simple, reliable and cost effective solution for operatorseverywhere. The UL® listed and NEMA® 4 rated “View at a Glance” operator interface isdesigned to provide all the information needed to operate and maintain your pumpingsystem. The most significant enhancement is that the LC150 is shipped “telemetryready.” With the addition of a radio, phone line connection, or connection to a highspeed Ethernet interface (with the Ethernet option) the LC150 allows you to monitorstation status, change pump start and stop setpoints, change high and low level alarmsetpoints, acknowledge alarms, and view pump run, fail and performance information.The LC150 was designed to incorporate multiple levels of security protection.Unauthorized modification of the LC150’s controlling parameters is prevented byenabling a password protection system. Only employees with authorized passwords cangain access into the system.

A1000i LOOP POWERED SUBMERSIBLE LEVELTRANSDUCER/TRANSMITTERThe A1000i Loop Powered Submersible Level Transducer/Transmitter is designed forhigh solids environments. Typical applications would include sewage lift station wetwells, sludge sumps and clean water level monitoring. The transducer uses a speciallydesigned diaphragm which allows the unit to ride through high process pressurespikes. A sealed breather assembly ensures correct barometric compensation. Thetransducer design provides electrical isolation from media. The A1000i is pre-calibratedto standard ranges and is virtually maintenance free. The transducer is also available in3 wire (A1000).

POWERPACK™ MOTOR CONTROL CENTERSOur Powerpack™ motor control centers are typically customized for each specificinstallation and combine selected automatic pump and process control systems withtop-quality protective alarm and monitoring equipment. The result is a system ofunsurpassed reliability and performance. Powerpack panels in NEMA-rated enclosuresmeet all specified job requirements and applicable industry and government standardsincluding UL 508 and 913. They are furnished with comprehensive wiring diagrams,parts lists, instructions, enclosure door layouts and dimensional drawings. Approvalsubmittals can also be supplied.

We have standardized our most popular Powerpack configurations under ourPowerpack™ Express name. These tightly integrated, ready to install fullindustrial/NEMA-rated and UL-approved control panels provide efficient, trouble freeoperation of your pump stations. Cost is minimized, drawings are immediate anddelivery is only a couple of weeks away.

9G-EF FLOAT SWITCHThe 9G-EF is a non-mercury, environmentally friendly float switch that is the most reliablefloat switch available today. Its unique construction with Teflon coated 5.5” diameter 316 SSball construction provides the most buoyancy in the business. Its magnetic reed switch isnon-position sensitive providing dependable, long life in wastewater. Mounting kits areavailable for rigid or suspension mounting.

MOTOR CONTROL CENTERSMotor Control Centers with integrated controls and/or telemetry equipment (Autosensory)is a specialty of ours. These tightly integrated systems reduce the need to mount multiplepanels requiring extensive amounts of interconnection wiring, saving both space and time.Systems are furnished completely tested and fully documented.