Resource Conservation

Challenge

U.S. EPA’s National Priority

Areas

Resource Conservation

Challenge

U.S. EPA’s National Priority

Areas Jon D. Johnston

U.S. EPA Region 4Chief, RCRA Programs Branch

Today’s Purpose

Overview of the RCC/FEC

So Far, the Story has been So Far, the Story has been

• Focused on hazardous waste– Built the cradle-to-grave system– Permits for facilities largely issued– Corrective action focused on high

priority sites• Next, moving to the 2020 Vision:

The Unfinished Business of RCRA– Prevent pollution and promote

recycling and reuse of materials– Reduce the use of priority chemicals

at all life cycle stages– Cradle to Cradle

The “Waste Wheel”

RCC GoalsRCC GoalsThree goals:

– Prevent pollution and promote recycling and reuse of materials

– Reduce the use of priority chemicals at all life cycle stages

– Increase energy and materials conservation

The Four National Priority Areas The Four National Priority Areas

1. 35% Recycling of Municipal Solid Waste

2. Beneficial Use of Secondary Materials

3. Priority and Toxic Chemical Reduction

4. Green Initiatives - Electronics

Other Priority AreasOther Priority Areas

RCC considered other areas, but they will be handled through their existing national and regional workgroups:

• Schools

• Green Buildings

• Hospitals

• Tires

National Priority Area:

Priority Chemicals

National Priority Area:

Priority Chemicals

The Listing of ChemicalsThe Listing of Chemicals1,2,4-Trichlorobenzene *1,2,4,5-Tetrachlorobenzene **2,4,5-Trichlorophenol *4-Bromophenyl phenyl ether **Acenaphthene **Acenaphthylene **Anthracene * Benzo(g,h,i)perylene Dibenzofuran * Dioxins/Furans Endosulfan, alpha &

Endosulfan, beta **Fluorene **Heptachlor *Heptachlor epoxide **Hexachlorobenzene *Hexachlorobutadiene

Hexachlorocyclohexane, gamma- (lindane)*

Hexachloroethane * Methoxychlor *Naphthalene *PAH Group (as defined in TRI) Pendimethalin Pentachlorobenzene Pentachloronitrobenzene *Pentachlorophenol *Phenanthrene Polychlorinated Biphenyls (PCBs)Pyrene **Trifluralin *Cadmium *Lead *Mercury *

Chemicals noted with “*” are considered the 1991 collection of priority chemicals used to define the 2005 GPRA Goal

WMPCs 1991 v 2001 lb BasisWMPCs 1991 v 2001 lb Basis

1991 WMPC 2001 WMPC* Pct Chg

Alabama 690,208 769,577 11%Florida 213,092 333,331 56%Georgia 492,293 568,191 15%Kentucky 496,569 1,211,085 144%Mississippi 492,009 500,422 2%North Carolina 381,160 629,122 65%South Carolina 1,677,419 1,862,532 11%Tennessee 85,705 4,112,598 4,699%Region 4 4,528,455 9,986,858 121%

2001 TRI Data & 2008 Goal2001 TRI Data & 2008 GoalState WMPCs 10%Alabama 769,577 76,958Florida 333,331 33,333Georgia 568,192 56,819Kentucky 1,211,085 121,109Mississippi 500,422 50,042North Carolina 629,123 62,912South Carolina 5,062,532 186,253Tennessee 4,112,598 411,260Total 13,186,861Corrected 9,986,861 998,686Pound basis

Priority Chemical Reduction Goals

Priority Chemical Reduction Goals

1.Substituting for priority chemicals with safer alternatives whenever possible;

2.Minimizing the amount used whenever substitution is not possible;

3.Maximizing recycling whenever minimization or substitution is not possible;

4.Minimizing exposures to toxics, and the volume and toxicity of waste through product design.

National Partnership for Environmental Priorities Program

National Partnership for Environmental Priorities Program

• Regional strategies to increase recruitment of NPEP Partners.

• Build relationships with existing State Pollution Prevention programs, and develop joint NPEP and State program targeting and recruitment goals.

National Priority Area: 35% MSW Diversion/Recycling

National Priority Area: 35% MSW Diversion/Recycling

35% Diversion/Recycling of Municipal Solid Waste (MSW)

GOALS:

35% Diversion/Recycling of Municipal Solid Waste (MSW)

GOALS:

• By 2008, increase diversion/recycling of the total annual MSW generated to 35% from 31% in 2002 (GPRA commitment)

• Each year through 2008, maintain the national average MSW rate at not more than 4.5 lbs. per person per day (GPRA commitment)

MSW Focus AreasMSW Focus Areas

• Paper

• Organic Materials

• Packaging & Containers

Initial Focus On Selected Sectors/Areas

Initial Focus On Selected Sectors/Areas

• Schools• Office Buildings• Residential; Multi-Family Dwellings• Landscapers• Food Establishments

– Examples: food courts, restaurants, grocers

• Recycling-On-The-Go Venues – Examples: shopping centers, ball parks, special events,

convenience stores, health clubs, recreation centers

National Action Plan: Avenues, Initiatives & Programs

For Success

National Action Plan: Avenues, Initiatives & Programs

For Success• America’s Marketplace Recycles

Implement recruitment strategy

• Recycling-On-The-GoLaunch Program

• Utilize other existing programs for outreach, support and potential pilot initiatives EMS staff, Performance Track staff, enforcement staff

• Issue papers and best management practices

• Work with schools and hospitals sectors

• Greening the Government – lead by example

Focus Areas:Focus Areas:

• Coal Combustion Products– C2P2 Program

• Foundry Sands

• Construction and Demolition Debris

National Priority Area: Beneficial UseNational Priority Area: Beneficial Use

National Priority Area:

Greening Initiatives-Electronics

National Priority Area:

Greening Initiatives-Electronics

Scope of Action PlanScope of Action Plan

• The RCC National Action Plan addresses environmental concerns along the entire life cycle of electronics, from design, operation, disposition, and disposal of equipment.

Scope of ChallengeScope of Challenge

• 50 million computers will become obsolete each year

• 300 million will be obsolete in 2005

• 2 million tons of electronics will be disposed each year

• Americans will have disposed of 154 million computers by 2005

Goals and ObjectivesGoals and Objectives

• Reduce or eliminate higher risk materials in electronics products at the source.

• Foster environmentally conscious design manufacturing.

• Increase purchasing and use of more environmentally sustainable electronics.

• Increase safe, environmentally sound reuse, recycling or disposal of used electronics.

Examples of Projects in Region 4Examples of Projects in Region 4

• Design for Environment– Electronics Toxicity Study

• FEC: Govt/Feds – Partnerships with GSA, Region 4,

Industry

• Plug In-to Ecycling: Public Program – TechBirmingham Collection Event– Dell Collection Event– Kentucky Electronics Workshops

Federal Electronics Challenge

DOE P2 Workshop

Topics

FEC Overview Electronics Recycling using READ contract Electronics, EMSs and the FEC Becoming an FEC Partner Q & A

What is the Federal Electronics Challenge? The FEC is a purchasing, use, and end-

of life management challenge issued for Federal facilities or agencies to: Purchase greener electronic products Manage electronic assets in an

environmentally sound manner Receive assistance and network with other

agencies to improve current practices

Why are we focusing on electronics?

There is no cohesive management system in place in the Federal

government to improve the life cycle management practices of electronic

equipment and enhance the growth of the infrastructure for the reuse and

recycling of obsolete electronics

FEC: Overall Goal

According the FEC Program the overall goal for Partners is: to reduce lifecycle environmental impacts of electronic products.

Memorandum of Understanding Signed by 12 agencies

on 11/15/04 Affirmed commitment to

lead by example in electronics life cycle management

Process for Fed. Elec. Stewardship Summit, first was held in Feb. 2005

Environmental Goals Reduce the environmental impact of the use and

maintenance of electronic equipment.

Reduce life-cycle impacts of electronic equipment through environmentally preferable purchasing.

Conserve and protect resources by increasing materials use efficiency, source reduction, and the recovery infrastructure of electronic equipment.

Reduce the volume and toxicity of electronic equipment waste through environmentally preferable end-of-life management.

Overview of FEC Program Voluntary program focused on education and

recognition Flexible (lots of choices within parameters) Valuable network Individual facility determines its:

Level of commitment Goal(s) Life cycle phase(s) on which to focus

Opportunities

As a Partner a Facility Can… Show leadership Reduce liability Save money Protect the environment Integrate FEC with your existing EMS

Focus on recognition

Recognition for all participating facilities

Partner Bronze Silver Gold

Strategic Goals

Integration of life cycle phases with higher partnership levels

Acquisition & Procurement, Operations & Maintenance, End of- Life

Performance Measures for PartnersFEC program will help Partners: Establish baseline measurements Develop goals Use standard reporting mechanisms Develop Partner Case Studies Provide environmental benefit conversions

Core focus of FEC = BMPs How did the FEC Steering Committee develop best

management practices? Working directly with federal procurement officials,

property managers, and information technology (IT) staff,

BMPs are outlined in Tools including: fact sheets, case studies, checklists, sample

contract/procurement language, presentations, Q & A’s

http://www.federalelectronicschallenge.net

Sampling of Tools Acquisition Planning & Procurement Checklist List of Federal Legislation and Executive Orders relevant to the FEC FAR Clauses Applicable to Environmental Purchasing Product Information Sheet Sample Product Information Sheet from IBM Environmental Attributes Using Environmental Attributes to Determine Best Value Ecolabels Contract Specifications Total Cost of Ownership Energy Conservation with ENERGY STAR® Executive Order 13123 and You Checklist for Selection of Electronics Reuse and Recycling Services Electronics Recycling Facility Audit Checklist Instructions to Recipients of Donated Electronics Federal Property Reuse Programs

Electronics Recycling using the READ contract

Recycling Electronics and Asset Disposition (READ) Services ContractOMB designated the EPA as the executive

agent for a Government Wide Acquisition Contract (GWAC) to provide the Federal sector with electronics recycling and asset disposition services.

READ GWAC Goals

Provide a contract vehicle for the proper disposition of Federal electronic equipment in an environmentally responsible manner

Ensure security for sensitive electronic data Create an audit trail of the equipment’s final

destination Maximize potential revenues from electronic

equipment

What services does the READ contract include? Contractors will provide Federal agencies

with: Logistical/Inventory Support Testing, Auditing and Tracking Data Security Valuation Process Recycling Management and Technical Support

READ Details

5-year Period of Performance (thru 12/09) Fully-competed Multiple Award, Indefinite

Delivery/Indefinite Quantity (IDIQ) contracts Flexible Statement of Objectives (SOO) Performance Based Task Orders Complete Small Business Set Aside

EPA READ Contractors:

Supplychain Services Inc.(SSI),Lombard,IL; Molam International, Marietta, GA; Asset Recovery Corp, St. Paul MN; Liquidity Services Inc. (LSI), Washington, DC; Hesstech, LLC, Edison, NJ; HOBI International, Battavia, IL; Global Investment Recovery (GIR), Tampa, FL;Please see www.epa.gov/oam/read for additional

facility locations

Electronics, EMSs and the FEC

Why Put Electronics into Your Agencies’ EMSs Creates way to get MOU/FEC goals met Gives facility staff support and framework for

the work they’ll be doing Electronics may be responsible for significant

environmental impacts for most federal facilities

EMSs and the FEC: a natural fit

According to ISO Standard 14001 the goal of an EMS is: to achieve and demonstrate sound environmental performance by controlling the impact of their activities on the environment.

According the FEC Program the overall goal for Partners is: to reduce lifecycle environmental impacts of electronic products.

Using the FEC approach to meet EMS Objectives

The FEC provides tools and assistance to: meet objectives through specific step by step activities identify responsibility by building a team and provides

access to other federal agencies experiences develop goals and measure progress by outlining

ways to measure, helping establish baselines and providing recognition for improvement

Where do electronics fit in an EMS? Significant Environmental Aspects:

Materials Use (purchase of office products) Waste generation Energy Use

Some Related Objectives: Purchase of electronics will consider price,

performance and environmental attributes Increase office recycling and recycle all batteries Establish Power-off Policy

FEC Tools to help with EMSs

FEC/EMS Electronics Module walks through an EMS program and how to

incorporate electronics with links to FEC Tools

EMSs and the FEC: What’s the connection a Q&A document explaining the link and providing

examples how EMS objectives can be meet by implementing FEC activities

Becoming an FEC Partner

Register Complete Baseline Survey Develop goals Initiate activities Report progress Apply for recognition

Register

Complete Baseline Survey

Develop Goals

Initiate Activities

Report Progress

Apply for Recognition

Receive Recognition

Contact Us

http://www.federalelectronicschallenge.net Delores Rodgers-Smith (US EPA Region 4) 404-562-8688 rodger-smith.delores@epa.gov Juan Lopez (Office of Federal Environmental Executive)

202-564-5214 lopez.juan@ofee.gov Laura Nazef (US EPA) 202-564-7523 nazef.laura@epa.gov