RESIN FIBRE DISCS - Wurth
Transcript of RESIN FIBRE DISCS - Wurth
RESIN FIBRE DISCS
Effective solution for high removal and low
contact pressure
CERAMIC PLUSInnovative grain technology that results in sharper
grain edges and higher stock removal on high alloyed steels and stainless steel.
Prefix: 580.91...Grit sizes: 36–120
8.500 U/min (rpm)
5.300 U/m
in (r
pm)
Diameter
4.5" / 5" / 7"
7/8"Drill Hole
13.300 /12.250/
Max. rotation speed
rota
tion sp
eed
Max. reco
mm
ende
d
8.300/7.5
00/
Zirconia
Aluminum
OxideCeramic
Standard High-Performance
Features:• Aggressive self-sharpening grain• Microcrystals that produce
sharper grain edges
Advantages:• Long service life• High removal rate• Low contact pressure required• Cool sanding
Applications:• Stainless steel• Steel• Aluminum• Rust resistant, acid resistant and
heat resistant high alloyed steels
PREMIUM ALUMINUM OXIDE
Prefix: 580.1...Grit sizes: 24–120
PREMIUM ZIRCONIAPrefix: 580.01...Grit sizes: 24–80
Diameter
4.5" / 5" / 7"
7/8"Drill Hole
13.300 /12.250/
8.500 U/min (rpm)
Max. rotation speed
rota
tion sp
eed
Max. reco
mm
ende
d
8.300/7.5
00/
5.300 U/m
in (r
pm)
Zirconia
Aluminum
OxideCeramic
Standard High-Performance
Features:Covered with a resin bond coating specially formulated to resist loading, glazing and grain stripping
Applications:Stock removal, finishing & blending, varying work piece substrates, flat surfaces, contour surfaces
Features:Covered with a resin bond coating
specially formulated to resist loading, glazing and grain stripping
Applications:Stock removal, finishing & blending,
varying work piece substrates, flat surfaces, contour surfaces,
stainless - cobalt titanium, general purpose grinding ferrous and non-
ferrous metals, fibreglass, wood
Printed in Canada. All rights reserved. May not be reproduced, in part or in whole, without prior co
nsent.
Würth Canada Limited/Limitée345 Hanlon Creek Boulevard
Guelph, Ontario, CanadaN1C 0A1
T (905) 564-6225F (905) 564-3671
SHOP.WURTH.CA
Centre Nut for Resin Fibre Discs715.58
5/8" - 11 centre locking nut for usewith Air Cooled Backing Pads
Backing Pads – Air Cooled for Resin Fibre Discs586.700...• Air Cooled• Easy to assemble• Max. RPM: 13,000• Cools the disc while grinding
Recommended Products