RESIDENTIAL BLOCK WALL/FENCE APPLICATION CHECKLIST ...
Transcript of RESIDENTIAL BLOCK WALL/FENCE APPLICATION CHECKLIST ...
City of Cerritos Department of Community Development Civic Center 18125 Bloomfield Avenue P.O. Box 3130 Cerritos, California 90703-3130 Phone: (562) 916-1201 Fax: (562) 916-1371 www.cerritosgis.com www.cerritos.us
RESIDENTIAL BLOCK WALL/FENCE APPLICATION
Submittal requirements for Residential Block Wall/Fence Application are listed below. Please include the following items:
1) PLANNING APPLICATION: Residential Block Wall/Fence Application Complete all sections (incomplete applications will delay processing time) Include all required plans/drawings/calculations listed in the application Homeowner’s signature required If property is located in a homeowners association, complete HOA Approval Form at
http://www.cerritos.us/RESIDENTS/_pdfs/hoa_approval_form.pdf
If you have any questions, please call the Planning Division at (562) 916-1201.
2) BUILDING PERMIT APPLICATION Complete all sections (incomplete applications will delay processing time) Complete Declaration Form
If owner-builder, complete columns 1 and 3 If contractor, complete columns 2 and 3
If you have any questions, please call the Building & Safety Division at (562) 916-1209.
Submit forms together, with all required plans/drawings, at https://cerritosca.seamlessdocs.com/f/Application_Plan_Submittal_Form
For more detailed information regarding the process for online submittal, please read the Planning/Building Interim Electronic Submittal Procedure at http://www.cerritos.us/BUSINESSES/_pdfs/interim_electronic_submittal_procedure.pdf
3) BUSINESS LICENSE REQUIREMENT
If you are a contractor, you must have a valid City of Cerritos business license. Please call the Business License Division at (562) 916-1236 to confirm active status or apply at http://www.cerritos.us/BUSINESSES/business_licenses.php
For more detailed information regarding the process for online submittal, please read the Business License Interim Electronic Submittal Procedure at http://www.cerritos.us/BUSINESSES/_pdfs/interim_business_license_procedure.pdf
Last Updated: December 2020
RESIDENTIAL BLOCK WALL/FENCE
APPLICATION CHECKLIST
Homeowner Information Name of Homeowner: _______________________________________________________ Address of Job Site: _________________________________________________________ Phone Number: ____________________________________________________________ Zoning (Check with City): RS-5000 RS-6500 Other _________________ Contractor Information Name of Contractor: _______________________________________________________ Address of Contractor: ______________________________________________________ Phone Number: ____________________________________________________________ State License Number: ______________________________________________________ City Business License Number: ________________________________________________ Type of Fence or Wall: Wood Masonry Block Wrought Iron Vinyl Fence or Wall Height: Front Yard: ________ Rear Yard: ________ Side Yard: _________ Nature of Work (check one): Repair* ________ Replacement* ________ New _________ *Percentage (%) of block wall to be repaired or replaced: ___________________________ *Please note that if the length of the repaired and/or replaced portion of the wall is less than 50% of the length of the wall segment within the subject property, a building permit shall not be required to be obtained concurrently with this application. The Homeowner agrees that all work will be done in accordance with the City of Cerritos Municipal Code, all other applicable Code provisions and consistent with the approved plans on which the permit was issued. A violation of the statements and requirements of the Municipal Code, including the failure to obtain a wall/fence permit prior to the construction of the wall/fence, may constitute an infraction punishable pursuant to Section 1.08.020 of the Cerritos Municipal Code. **Homeowner's Signature __________________________________ Date ____________ Contractor's Signature ____________________________________ Date _____________ ** Application must be signed by the homeowner prior to submittal to the City.
(Office use only)
Community Development Approval Approved by: Date: AP # Revised: May 2015
City of Cerritos Department of Community Development Civic Center 18125 Bloomfield Avenue P.O. Box 3130 Cerritos, California 90703-3130 Phone: (562) 916-1201 Fax: (562) 916-1371 www.cerritosgis.com www.cerritos.us
RESIDENTIAL BLOCK WALL/ FENCE APPLICATION
City of Cerritos Department of Community Development
Residential Block Wall/Fence Application Page 2 of 6
IMPLEMENTATION STANDARDS Wall Thickness for All Walls: • Four-inch (4") thick block is prohibited. • Where a thicker block is constructed adjacent to an existing 4" block wall, the portion of
the wall facing a public street shall be aligned flush with the face of the existing block wall, such that there is no visible jog in the wall. The thicker portion of the new block shall extend into the subject property.
Within the Front Yard: • Any construction of a new or replacement wall/fence shall require the approval of the
Community Development Department. All walls/fences greater than the height of thirty (30) inches shall also require a building permit prior to construction.
• Walls/fences visible from any area within the public right-of-way shall be constructed of a decorative material such as slump block, brick, wrought iron or wood grain embossed vinyl and subject to the approval of the Director of Community Development.
• Block walls may be constructed to a maximum of thirty (30) inches in height within the
first five (5) feet of the property as measured from the front property line. For corner residential lots, decorative walls/fences located along the arc of the corner within the first five (5) feet from the property line shall not exceed eighteen (18) inches in height as measured from the top of the adjacent street curb.
• Walls/fences may be constructed to a maximum of five (5) feet in height when set back
a minimum of five (5) feet from the front property line but they shall be designed and constructed in a manner which allows objects on the other side to be clearly seen above the height of thirty (30) inches. Walls and fences in the front yard are typically constructed with a maximum thirty (30) inches of solid material at the base of the wall or fence and thirty (30) inches of open material above. Open material such as wrought iron, or other material approved by the Director of Community Development, may be used.
• Pilasters constructed of slump block, split-face block, brick or concrete finished with
stucco of the same colors as the residence, measuring a maximum of five (5) feet in height, of a cross section of no more than twelve (12) inches square and separated by a minimum distance of eight (8) feet, may be permitted when used to support a decorative fence.
• All decorative walls/fences or gates visible from the public right-of-way and that abut
the side or rear yard shall incorporate decorative solid screening materials approved by the Director of Community Development.
• Painting or staining of any masonry walls/fences shall be prohibited unless the paint
color is deemed by the Director of Community Development to be consistent with the natural color of the masonry material used to construct the wall/fence. Any person desiring to paint or stain a masonry wall/fence shall obtain prior approval, in writing, from the Department of Community Development.
City of Cerritos Department of Community Development
Residential Block Wall/Fence Application Page 3 of 6
Perimeter Walls/Fences within a Residential Subdivision
• A perimeter wall/fence located along the side or rear property line shall consist of masonry block and shall be compatible with the color of the residence and any abutting walls/fences.
• A solid block wall/fence constructed within the perimeter of a subdivision shall be a
minimum height of six (6) feet and a maximum height of eight (8) feet, including wall/fence extensions, as measured from the highest ground level on either side of the wall/fence.
• A wall/fence extension shall be compatible with the color, style, and usage of the
abutting property and shall be subject to the approval of the Director of Community Development.
Perimeter Walls/Fences along the Perimeter of a Residential Subdivision
• A perimeter wall/fence located along the side or rear property line shall consist of slump block, shall be compatible with the color and design of abutting walls along the perimeter of the subdivision, and shall be subject to the approval of the Director of Community Development.
• A solid slump block wall/fence constructed along the perimeter of a residential
subdivision shall be a minimum height of 6'-6" and a maximum height of 8'-0", as measured from the highest ground level on either side of the wall.
• No wall extensions are permitted on the perimeter of a residential subdivision.
Chain Link Fences
• Chain link fences/gates shall not be allowed.
Decorative Gates • Gates leading to side yards must be at least 6'-0" high and be constructed of solid
materials such as wood or steel to screen the side yard from view from the public right-of-way.
• Decorative gates are prohibited from swinging out into the public right-of-way.
INFORMATION REQUIRED FOR PLAN APPROVAL
1. Plot plan of the entire lot including the subject residence, adjacent residences and locations of existing and proposed walls/fences (two copies-see attached example).
2. Structural Plans are required for block walls over thirty (30) inches in height
(two copies-see attached examples). Note: The example structural plans are provided by the City of Cerritos as an
approved design for block walls. The examples are provided to serve as guidelines and stipulate minimum requirements for the construction of block walls regarding foundation, structural reinforcement, and grouting, and may
City of Cerritos Department of Community Development
Residential Block Wall/Fence Application Page 4 of 6
be used in lieu of hiring an engineer for structural calculations. If the applicant desires to use the provided structural plans, the attached "General Release and Waiver of Claims" must be signed and submitted to the Department of Community Development along with the application for block wall or fence approval. Walls shall not be required to be limited to this design; however, any alternative design must receive approval from the Cerritos Building and Safety Division.
3. Common Property Line Agreement is required for walls/fences proposed on
common property lines. The agreement must be signed by the adjacent property owner(s) (see attachment).
Note: If approval from adjacent property owner(s) is not possible, the wall/fence may be built within the subject property provided that a land survey signed by a Land Surveyor licensed in the State of California is submitted along with the wall/fence plan and the wall/fence, including the foundation is constructed entirely on the subject property.
4. Submit the above information, the Homeowners Association approval if
applicable, to the City of Cerritos, Community Development Department for review.
City of Cerritos Department of Community Development
Residential Block Wall/Fence Application Page 5 of 6
SAMPLE PLOT PLAN/HEIGHT RESTRICTIONS
RESIDENCE RESIDENCE RESIDENCE
RESIDENCE RESIDENCE SUBJECT SITE
5'
= THIRTY INCH (30") MAXIMUM WALL/FENCE HEIGHT IN THIS AREA
= FIVE FEET (5') MAXIMUM DECORATIVE WALL/FENCE HEIGHT IN THIS AREA THIRTY INCH (30") MAXIMUM HEIGHT SOLID WALL ABOVE THIRTY INCHES (30"), WALLS SHALL BE DESIGNED AND
CONSTRUCTED WITH OPEN MATERIAL TO ALLOW FOR OBJECTS TO BE CLEARLY SEEN ON THE OTHER SIDE OF THE WALL
LEGEND: HEIGHT RESTRICTIONS
= SIX FEET (6') TO EIGHT FEET (8') MAXIMUM WALL/FENCE HEIGHT IN THIS AREA
City of Cerritos Department of Community Development
Residential Block Wall/Fence Application Page 6 of 6
COMMON PROPERTY LINE AGREEMENT SIGNATURE OF AUTHORIZATION(S)
This agreement, by the following property owners, gives permission to construct a wall on or over the common property line without restrictions.
Address of Job Site: _________________________________________________________
Homeowner's Signature: ___________________Print Name: ________________________
Adjacent Property #1 Address: ________________________________________________
Homeowner's Signature: ___________________Print Name: ________________________
Adjacent Property #2 Address: ________________________________________________
Homeowner's Signature: ___________________Print Name: ________________________
Adjacent Property #3 Address: ________________________________________________
Homeowner's Signature: ___________________Print Name: ________________________
Subject Site Property
#1
Property #2
Property #3
GENERAL RELEASE AND WAIVER OF CLAIMS This general release and waiver of claims (“RELEASE”) is entered into by the property owner and user of the wall plans (“WALL PLANS”) described below. The WALL PLANS are standard block wall plans provided as a service by the City of Cerritos (“City”) and attached to this RELEASE. By signing this RELEASE, I certify that I am the user of the WALL PLANS and I agree with and understand the following provisions of this RELEASE:
I understand that the WALL PLANS provided by the City of Cerritos are a pre-approved design for block walls that are six (6) feet or less in height. I understand that four-inch (4") thick block is prohibited, and I will not employ the use of 4"-thick block. I understand that I am not required to use nor am I limited to the use of the WALL PLANS for the design of my wall. I further understand that any alternative wall design must receive approval from the City. I hereby acknowledge and agree to release and hold harmless the City of Cerritos, and each of its officers, agents, and employees, from liability of whatsoever nature or form based on any misuse of or any construction defect, problem, complication or cost that results from the use of the WALL PLANS. I further acknowledge and agree to release and hold harmless the City of Cerritos, and each of its officers, agents, and employees, from any and all claims, suits, losses, liabilities, injuries, damages, expenses, and costs of any kind or nature, arising out of or in any way connected with the use of the WALL PLANS. I understand that use of the WALL PLANS described above is only permitted after signing this RELEASE. Dated: _______________________________ ______________________________________ Signature ______________________________________ Print Name
City of Cerritos
18125 Bloomfield Avenue
Cerritos, CA 90703
(562) 916‐1209
Department of Community
Development Building and Safety Division
Building/Plumbing/Electrical/Mechanical Permit Applica on
Applicant’s Name: _________________________________________________________________________________________
Company Name (if applicable): _______________________________________________________________________________
Tel. No:______________________________ Email:_________________________________________ Date:_________________
Job Site Address: _________________________________________________________________________Suite:_____________
Work Descrip on:__________________________________________________________________________________________
_________________________________________________________________________________________________________
_________________________________________________________________________________________________________ Is this an owner‐builder project?
Yes, this is an owner‐builder project. As the applicant for an owner‐building project, you are required to complete columns 1 and 3 of a ached Declara on Form.
Is the job site address your primary residence? Yes No (If no, an owner‐builder project is not permi ed, and the owner must contract exclusively with a licensed contractor.)
No, this is not an owner‐builder project. Complete columns 2 and 3 of the a ached Declara on Form.
Project Valua on:_______________________________________ APN#:_____________________________________________
Project Size (sq. .):__________________________ Buildings on Lot: __________ # of Stories____________________________
Construc on Types:______________________________________ Occupancy Groups:_______________________________
Type of Permit(s) Requested: Building Plumbing Electrical Mechanical
Owner/Business Name: __________________________________________________________________________________
Street Address: _____________________________________________________________________________________________
City: ______________________________________________ State: ___________________ Zip Code: _____________________
Telephone Number:__________________________________ Email: _________________________________________________
Contractor Name: __________________________________ Company:_____________________________________________
Street Address: _____________________________________________________________________________________________
City: ______________________________________________ State: ___________________ Zip Code: _____________________
Telephone Number:__________________________________ Email: _________________________________________________
License No: ______________________________ Class: ____________________ Expira on Date: _________________________
City Business License No: _____________________________________________ Expira on Date: _________________________
(Please fill out a ached Licensed Contractor’s Declara on Form)
Architect/Engineer Name: _______________________________ Company: _________________________________________
Street Address: _____________________________________________________________________________________________
City: ______________________________________________ State: ___________________ Zip Code: _____________________
Telephone Number:_________________________________________________________________________________________
License No: ______________________________ Class: ____________________ Expira on Date: __________________________
Building Permit #: __________________
Trade Permit #: __________________
Parent Permit#: __________________
(For office use only)
Building/Plumbing/Electrical/Mechanical Permit Applica on (con nued)
PLUMBING
Code Items Units
03 Backwater Valves _____ Valve(s)
05 Backflow preven on device/sprinkler _____ Device(s)
07 Bathtubs/showers _____ Fixture(s)
11 Clothes washer (tray/standpipe) _____ Fixture(s)
13 Dishwashers _____ Fixture(s)
15 Drinking fountain _____ Fixture(s)
17 Floor drains _____ Fixture(s)
19 Floor sinks _____ Fixture(s)
21 Hose bibbs _____ Fixture(s)
23 Interceptor (clarifier) _____ System(s)
25 Lavatories/sinks _____ Fixture(s)
26 Miscellaneous fixture _____ Fixture(s)
27 Pressure regulator—prv/water _____ Device(s)
29 Roof drains _____ Fixture(s)
35 Solar water hea ng system _____ System(s)
39 Swimming pool trap and receptor _____ System(s)
41 Trap primer _____ System(s)
Code Items Units
45 Water closet/urinal/bidet _____ Fixture(s)
47 Water heater _____ W.H.(s)
49 Water trea ng equipment (filter, so ener) _____ System(s)
51 Low pressure gas sys. (5 outlets or less) _____ System(s)
52 Fee for addi onal outlets >5 _____ Outlet(s)
53 Medium/high pressure gas system _____ System(s)
54 Addi onal fee for each outlet _____ Outlet(s)
55 Gas meter (private) _____ Meter(s)
56 Gas regulator _____ Reg(s)
60 Drainage/vent piping repair or alter _____ System(s)
62 Greywater system _____ System(s)
63 Water piping replacement branch/fixture _____ Fixture(s)
64 Other water piping < 1 1/2 inches _____ Line(s)
65 Other water piping 2‐3 inches _____ Line(s)
66 Other water piping > 3 inches _____ Line(s)
Code Items Units 02 Refrig compressor < 100 kbtu _____ Comp(s)
03 Refrig compressor 101—500 kbtu _____ Comp(s)
04 Refrig compressor > 500 kbtu _____ Comp(s)
08 Furnace/heater <100 kbtu _____ Unit(s)
09 Furnace/heater 101‐500 kbtu _____ Unit(s)
10 Furnace/heater > 500 kbtu _____ Unit(s)
17 Boiler < 100 kbtu _____ Boiler(s)
18 Boiler 101‐500 kbtu _____ Boiler(s)
19 Boiler > 500 kbtu _____ Boiler(s)
20 Fireplace/gas log < 100 kbtu _____ Appl(s)
21 Fireplace/gas log 101‐500 kbtu ____ Appl(s)
22 Fireplace/gas log > 500 kbtu _____ Appl(s)
30 Air inlets/outlets (each) _____ Unit(s)
MECHANICAL
Code Items Units 31 Air inlets/outlets (area) _____ Sq. Ft.
32 Appliance vent (other) _____ Unit(s)
35 Air handling unit < 2000 cfm _____ Ahu(s)
36 Air handling unit 2000—10000 cfm _____ Ahu(s)
37 Air handling unit > 10000 cfm _____ Ahu(s)
40 Evapora ve coolers _____ Unit(s)
41 Ven la on fan (single register) _____ Fan(s)
42 Ven la on system (other) _____ System(s)
43 Commercial kitchen exhaust hoods _____ Hood(s)
44 Spray booth _____ Booth(s)
45 Product conveying duct system _____ System(s)
46 Fire dampers _____ Damper(s)
47 Altera on of exis ng duct system _____ System(s)
ELECTRICAL
Code Items Quan ty B1 Residen al new bldgs. Mul family _____ Sq. Ft. B2 Residen al new bldgs. 1 or 2 family _____ Sq. Ft. C1 Swimming pools, new _____ Pool(s) C2 Spas, hot tubs, _____ Pool(s) C3 Pool altera ons, other type pools _____ Pool(s) D1 Carnival electrical rides or genrtrs _____ Unit(s) D2 Carnival mech rides, displays w/lgt _____ Unit(s) D3 Carnival booth ligh ng _____ Unit(s) E1 Temporary service, power pole _____ Pole(s) E2 Temporary dist system for const _____ Unit(s) E3 Temp pole for xmas tree lots _____ Pole(s) F1 Branch circuits, 120v, 15 or 20a _____ Ckt(s) F2 Branch circuits, ligh ng, 208‐277v _____ Ckt(s) G1 Outlets‐ligh ng, recept, switch _____ Outlet(s) G2 Ligh ng fixtures _____ Lgt Ftx(s) G3 Pole moun ng light fixtures _____ Pole Fxt(s) G4 Theatrical‐type lgt fixtures _____ Lgt Ftx(s) Residen al Appliances Less Than 3hp HA Forced air units (FAU) _____ Appl(s) H1 Electrical ovens _____ Appl(s) H2 Garbage disposals _____ Appl(s) H3 Dishwashers _____ Appl(s) H4 Range hoods _____ Appl(s) H5 Washing machines _____ Appl(s) H7 Exhaust fans _____ Appl(s) H9 Other residen al less than 3hp _____ Appl(s) Non Residen al Appliances Less Than 3hp 1A Exhaust fans _____ Appl(s) 1B Electric water heaters _____ Appl(s) 1C Lighted showcases _____ Appl(s) 1D Electric drinking fountains _____ Appl(s) 1E Vending machines _____ Appl(s) 1F Laundry machines _____ Appl(s) J5 Other non‐res less than 3hp _____ Appl(s)
Code Item Quan ty Electric Signs K1 Signs, outline lgt, one ckt _____ Sign(s) K2 Additnl, ckt within the same sign _____ Sign(s) Power Equipment Over 3hp and Less Than 10hp JA Heat pumps _____ Appl(s) JB AC units _____ Appl(s) JD Ba ery chargers _____ Appl(s) JE Electric water heaters _____ Appl(s) JF Refrigera on cabinets _____ Appl(s) JG Electric cooking equipment _____ Appl(s) JH Electric heaters _____ Appl(s) JI Electric generators _____ Appl(s) J6 Other equipment > 3hp—<10hp _____ Appl(s) Special Electrical Items P2 PC residen al photo voltaic<10kw _____ P3 Inverter res photo volt <10kw _____ P4 PC residen al photo volt >10kw<50kw _____ P5 Inverter res photo volt >10kw<50kw _____ V2 <=10kw electric vehicle supply equip _____ #Units V3 >10kw electric vehicle supple equip _____ #Units V4 Fast electric vehicle supple equip _____ #Units Transformers JM Transformers, <3kva _____ Xfmr(s) JN Transformers, 15kva _____ Xfmr(s) JO Transformers, 25kva _____ Xfmr(s) JQ Transformers, 37.5kva _____ Xfmr(s) JR Transformers, 45kva _____ Xfmr(s) JS Transformers, 50kva _____ Xfmr(s) JT Transformers, 75kva _____ Xfmr(s) JU Transformers, 112.5kva _____ Xfmr(s) JV Transformers, 150kva _____ Xfmr(s) JW Transformers, 225kva _____ Xfmr(s)
Code Item Quan ty Motors JX Motors, <3hp _____ Mtr(s) JY Motors, 5hp _____ Mtr(s) JZ Motors, 10hp _____ Mtr(s) J0 Motors, 15hp _____ Mtr(s) J1 Motors, 20hp _____ Mtr(s) J2 Motors, 25hp _____ Mtr(s) J3 Motors, 50hp _____ Mtr(s) J4 Motors, 100hp _____ Mtr(s) Other Power Equipment J7 Pwr eq w/ra ng > 10hp to <50hp _____ Pwr J8 Pwr eq w/ra ng > 50hp to <100hp _____ Pwr J9 Pwr eq w/ra ng > 100hp _____ Pwr Services, Panels, Control Panels, Mcc’s LA 100a panels, services, mcc’s _____ Pnl(s) LB 200a panels, services, mcc’s _____ Pnl(s) LC 225a panels, services, mcc’s _____ Pnl(s) LD 400a panels, services, mcc’s _____ Pnl(s) LE 600a panels, services, mcc’s _____ Pnl(s) LF 800a panels, services, mcc’s _____ Pnl(s) LG 1000a panels, services, mcc’s _____ Pnl(s) LH 1200a panels, services, mcc’s _____ Pnl(s) LI 1600a panels, services, mcc’s _____ Pnl(s) LJ 2000a panels, services, mcc’s _____ Pnl(s) LL 3000a panels, services, mcc’s _____ Pnl(s) LM High voltage panels (over 600v) _____ Pnl(s) LN Other panels, 0 to 399 amps _____ Pnl(s) LO Other panels, 400 to 1000 amps _____ Pnl(s) LP Other panels, >1000 amps _____ Pnl(s) W1 Cable trays, busways (length) _____ Feet M1 Misc conduits & conductors _____ Unit(s) P1 Haz loca ons >2000 sf total _____ Haz R1 Report review fee, # of equip _____ Eq R2 High voltage report fee, #equip _____ HV Eq
COLUMN 1
OWNER-BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the
Contractors’ State License Law for the reason(s) indicated below by
the checkmark(s) I have placed next to the applicable item(s)
(Section 7031.5, Business and Professions Code): Any city or county
that requires a permit to construct, alter, improve, demolish, or repair
any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to
the provisions of the Contractors’ State License Law (Chapter 9
(commencing with Section 7000) of Division 3 of the Business and
Professions Code) or that he or she is exempt from licensure and the
basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of
not more than five hundred dollars ($500).)
(___) I, as owner of the property, or my employees with wages as
their sole compensation, will do (__) all of or (__) portions of the
work, and the structure is not intended or offered for sale (Section
7044, Business and Professions Code: The Contractors’ State
License Law does not apply to an owner of property who, through
employees’ or personal effort, builds or improves the property,
provided that the improvements are not intended or offered for sale.
If, however, the building or improvement is sold within one year of
completion, the Owner-Builder will have the burden of proving that it
was not built or improved for the purpose of sale.)
(__) I, as owner of the property, am exclusively contracting with
licensed Contractors to construct the project (Section 7044, Business
and Professions Code. The Contractor’s State License Law does not
apply to an owner of property who builds or improves thereon, and
who contractors for the projects with a license Contractor pursuant to
the Contractors’ State License Law.).
(__) I am exempt from licensure under the Contractors’ State License
Law for the following reason:
___________________________________________
By my signature below I acknowledge that, except for my personal
residence in which I must have resided for at least one year prior to
completion of the improvements covered by this permit, I cannot
legally sell a structure that I have built as an owner-builder if it has
not been constructed in its entirety by licensed contractors. I
understand that a copy of the applicable law, Section 7044 of the
Business and Professions Code, is available upon request when this
application is submitted or at the following Web site:
http://www.leginfo.ca.gov/calaw.html.
Date: ___________________________
________________________________________
Signature of Property Owner of Authorized Agent
COLUMN 2
LICENSED CONTRACTOR’S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under
provisions of Chapter 9 (commencing with Section 7000) of Division 3
of the Business and Professions Code, and my license is in full force
and effect.
License Class __________ License No. ___________________
Date ________ Contractor Signature ______________________
WORKERS’ COMPENSATION DECLARATION
WARNING: FAILURE TO SECURE WORKER’S COMPENSATION
COVERAGE IS UNLAWFUL AND SHALL SUBJECT AN
EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
ONE HUNDRED THOUSAND DOLLARS ($100,000), IN ADDITION
TO THE COST OF COMPENSATION, DAMAGES ARE PROVIDED
FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND
ATTORNEY’S FEES.
I hereby affirm under penalty of perjury one of the following
declarations:
___ I have and will maintain a certificate of consent to self-insure for
workers’ compensation, issued by the Director of Industrial Relations
as provided for by Section 3700 of the Labor Code, for the
performance of the work for which this permit is issued.
Policy No. __________________________________
___ I have and will maintain workers’ compensation insurance, as
required by Section 3700 of the Labor Code, for the performance of
the work for which this permit is issued. My workers’ compensation
insurance carrier and policy number are:
_________________ ____________________ ____________
Carrier Policy Number Expiration Date
____________________________ ___________________
Name of Agent Phone Number
___ I certify that, in the performance of the work for which this permit
is issued, I shall not employ any person in any manner so as to
become subject to the workers’ compensation laws of California, and
agree that, if I should become subject to the workers’ compensation
provisions of Section 3700 of the Labor Code, I shall forthwith comply
with those provisions
_________________________________ ________________
Signature of Applicant Date
JOB ADDRESS
LOCALITY
COLUMN 3
HAZARDOUS MATERIAL DECLARATION
Will the applicant or future building occupant handle a hazardous
material or a mixture containing a hazardous material equal to or
greater than the amount specified on the hazardous material
information guide?
Yes No
Will the intended use of the building by the applicant or future
building occupant require a permit for construction or modification
from the South Coast Air Quality Management District
(SCAQMD)? See permitting checklist for guidelines.
Yes No
I have read the hazardous materials information guide and the
SCAQMD permitting checklist. I understand my requirements
under the Los Angeles County Code Title 2, Chapter 220 Sections
220.100 through 220.140 concerning hazardous material reporting
and for obtaining a permit from the SCAQMD.
ASBESTOS NOTIFICATION
Notification letter sent to SCAQMD or EPA
I declare that notification of asbestos removal is not applicable
to addressed project.
DECLARATION REGARDING CONSTRUCTION LENDING
AGENCY
I hereby affirm under penalty of perjury that there is a Construction
lending agency for the performance of the work for which this
permit is issued (Section 3097, Civil Code)
___________________________________________
Lender’s Name
___________________________________________
Lender’s Address
By my signature below, I certify to each of the following:
I am the property owner or authorized to act on the property
owner’s behalf.
I have read this application and the information I have provided is
correct.
I agree to comply with all applicable city and county ordinances
and state laws relating to building construction.
I authorize representatives of this county to enter the above-
identified property for inspection purposes.
___________________________________________
Signature of Property Owner or Authorized Agent
______________________________________
Date