Research Facilities Events and Venues Chemical Abstracts n Chemtura n Dow Chemical ... n U.S. Naval...
Transcript of Research Facilities Events and Venues Chemical Abstracts n Chemtura n Dow Chemical ... n U.S. Naval...
GRADUATE STUDY IN POLYMER SCIENCE The Department of Polymer Science offers both master’s and doctorate degrees in polymer science.
Students interested in biology-related research may wish to participate in the newly created Integrated Biosciences Ph.D. program. This exciting new Ph.D. program brings together numerous departments to produce a learning experience designed to fill the need for scientists who can think and talk across several fields of scientific inquiry. Please visit www.uakron.edu/id/ib.
TH
E U
NIV
ER
SIT
Y O
F A
KR
ON
THE
UN
IVE
RSI
TY
OF
AK
RO
Nw
ww
.uak
ron.
edu
DE
PAR
TME
NT
OF
PO
LYM
ER
SC
IEN
CE
ww
w.u
akro
n.ed
u/cp
spe
After Graduation Polymer Science graduates go on to productive and successful careers in private industry, government and education. Here’s a sampling of their employers:
JOB PLACEMENT AFTER GRADUATION Department of Polymer Science graduates enjoy a high job placement rate after receiving their degree – 100 percent placement within one year of graduation. This is made possible because most graduates either have secured a job before they graduate, or have one lined up once they’re out of school and ready to begin their career.
n 3M n Advanced Elastomer
Systems n Akron Polymer Systems n Akron Rubber
Development Lab n ALCOA n AMOCO n ATK Space Systems n AT&T Bell Labs n BASF n Ben Venue Laboratories, Inc n BFGoodrich n BP Research n Bridgestone Americas, Inc. n Case Western Reserve
University n Carnegie Mellon University n Chemical Abstracts n Chemtura n Dow Chemical n DuPont n Eastman Chemical Company n Exxon Mobil n Firestone Polymers, LLC n Ford Motor Company n GAF Corporation n The Goodyear Tire &
Rubber Company n Hankook Tire Co., LTD. n Hercules Research n Honeywell n Hyundai Petrochemical n IBM n Ingredron n Johnson & Johnson
n Kumho Tire n LG Chemical n Lexmark n Lubrizol Corporation n The Lord Corporation n Morton Chemical n MRI Medical n NASA n NIST n Ohio Aerospace Institute n Penn State University n Proctor & Gamble n Renssalaer Polytechnic n SABIC n Samsung Electronics n Samyung Corporation n Shell Chemical Company n Shell Oil n Sherwin-Williams n Tektronix n The Timken Company n The University of Akron n Ticona n Tremco n University of California n University of Colorado n University of
Southern Mississippi n University of Tennessee,
Knoxville n U.S. Army n U.S. Naval Air Warfare Center n Virginia Tech n Westinghouse n Xerox n Zeon Chemicals
About The University of Akron The University of Akron offers more than 300 associate, bachelor’s, master’s, doctorate and law degree programs – with accreditations by 35 professional agencies. With nearly 30,000 students and $65 million in research expenditures, UA is among the nation’s strongest public universities focused on innovation, entrepreneurship, and investment in community and economic growth.
Programs are targeted to diverse groups of learners, including full-time, part-time and on-line students, veterans, and adults returning to the classroom. The distinctive Akron Experience enhances post-graduate success through internships and co-ops, academic research (both undergraduate and graduate), study abroad, on-campus student employment, and service projects.
The University of Akron is an Equal Education and Employment Institution © 2013 by The University of Akron / E-0413-32071
Events and Venues Akron, Ohio With a population of nearly 200,000, Akron is Ohio’s fifth-largest city. It offers a vibrant downtown, serene parks, shopping, events and venues that appeal to almost every interest. Its regional location and easy access to air and highway travel puts you at the hub of a world of experiences and opportunities.
Research Facilities An impressive array of research facilities is available. Most of those used by polymer science faculty and staff are located in the 146,000-square-foot Goodyear Polymer Center. More than 50 laboratories are equipped with modern tools for the synthesis of polymers, the study of polymer structure and properties, and the fabrication of new composite materials.
State-of-the-art instrumentation is available for NMR, FTIR and UV-visible spectroscopy; GPC; MALDI-TOF mass spectrometry, thermal analysis; rheo-optics; X-ray diffraction; and scanning probe, electron and fluorescence microscopy; laser capture microdissection, immunohistochemistry and related bioengineering techniques. Molecular modeling research is pursued using a range of powerful software and advanced computing hardware.
Capabilities for biomaterials and biomedical polymer research are growing rapidly. Class II cell and tissue facilities as well as advanced imaging and nanotechnology fabrication capabilities are available. New connections through the Austen BioInnovation Institute are providing greater access to animal facilities and clinical research infrastructure.
n Akron Symphony Orchestra Performs at E.J. Thomas Performing Arts Hall
n Pro Football Hall of Fame n UA’s InfoCision Stadium-Summa Field n Rock and Roll Hall of Fame n Cuyahoga Valley National Park n Annual All-American Soap Box Derby n Akron Aeros Minor League Baseball n Akron Racers Womens Softball n Cleveland Pro Sports:
Browns, Cavaliers and Indians . POLYMERSCIENCE
GRADUATE STUDY
Welcome to the Department of Polymer Science
Department of Polymer Science Students Students in the department, who represent the United States and numerous foreign countries, pursue Polymer Science degrees within an interdisciplinary curriculum. Students come into the program with backgrounds in chemistry, chemical engineering, physics, materials science and engineering, polymer science, polymer engineering, biology and computer science, often with the support of scholarships and awards, graduate assistantships, and sometimes government fellowships from the National Science Foundation and the National Institutes of Health.
The Polymer Science Student Organization (PSSO) sponsors academic and extracurricular activities, including trips to scientific meetings and research and production facilities of area industries, student seminars, picnics, and weekly intramural events. PSSO has sponsored guest speakers on career development and resume/interview preparation, and the group also directs the Eastman Chemical Company Lecture Series, which brings two researchers to campus each year. PSSO officers (elected annually) serve on a planning committee to provide input on issues within the department, college and University.
Celebrating over 50 Years of Polymers The University of Akron is the center of Akron, Ohio, the Polymer Capital of the World. Since 1956, students and faculty from around the globe have come to UA to focus on polymer innovations and applications of research in science, technology, and medicine. In fact, The University of Akron is the only graduate college in the US that offers both Polymer Science and Polymer Engineering programs. The 25th anniversary of the College was celebrated in 2013.
FINANCIAL AID The department supports all incoming qualified full-time Ph.D. graduate students. For 2014-15 the standard stipend amount for departmental assistantships is $22,000, with some enhanced stipends and industrial fellowships as high as $30,000 for 12 months. Students who receive financial aid also are awarded a tuition scholarship for instructional and general fees. Through grants and contracts awarded to Polymer Science faculty, more than 150 additional students are supported as research assistants.
APPLICATION INFORMATION AND PROCEDURES Students with an undergraduate degree in chemistry, physics or engineering and a GPA of 2.75/4.0 or better may apply online at www.uakron.edu/cpspe/academics/apply-now.dot. Students with a degree in biology or natural sciences usually need additional undergraduate courses in physical and analytical chemistry. For such students a special non-degree admission may be given for one or two semesters, followed by a full admission upon successful completion of the remedial undergraduate courses. A student with a master’s degree from another university may be admitted to the Ph.D. program. Three letters of recommendation are required in such a case to be certain that the student is likely to be successful in doctoral research.
GRADUATE ADMISSIONS REQUIREMENTS FOR THE DEPARTMENT OF POLYMER SCIENCE Persons seeking admission into the Ph.D. program in the Department of Polymer Science are required to submit all of the listed materials to the UA graduate school. Incomplete applications will not be considered under any circumstances.
1. Fully completed on-line Graduate Application
2. Application Fee
3. ALL official undergraduate transcripts and, if applicable, graduate transcripts
4. Three (3) letters of professional recommendation
5. Statement of purpose (personal statement)
6. Submission of Graduate Record Examination (GRE) general test scores (subject exam recommended)
7. All international students must submit official Test of English as a Foreign Language (TOEFL) scores (minimum 550 paper-based; 213 computer-based; or 79 internet-based)
The early consideration application deadline for fall, 2014, is Dec. 15, 2013, for Ph.D. applicants. The final application deadline for both foreign and domestic applicants is Feb. 1, 2014.
Purushottam D. Gujrati – Professor of Physics and Polymer Science
Ph.D., Columbia University, 1979 phone: 330-972-7136 e-mail: [email protected]
Equilibrium and nonequilibrium statistical thermodynamics; phase transitions and critical phenomena; glass transition;
relaxation and aging; polymer solution theory; effects of free-volume, branching, architecture and size disparity; quantum effects in nanoscale motors.
Gary R. Hamed – Professor of Polymer Science
Ph.D., University of Akron, 1978 phone: 330-972-6831 e-mail: [email protected]
Rheology of adhesion; autohesion and tack; brass-rubber adhesion; fracture of rubber; anisotropic rubber;
rubber reinforcement.
Li Jia – Assistant Professor of Polymer Science
Ph.D., Northwestern University, 1996 phone: 330-972-7511 e-mail: [email protected]
Metal-catalyzed polymerizations, supramolecular micelles and elastomers, synthesis of polymeric electronic and
optoelectronic materials, and soft lithography via nanoparticle self-assembly.
Abraham Joy – Assistant Professor of Polymer Science
Ph.D., Tulane University, 2000 phone: 330-972-6004 e-mail: [email protected]
• Development of densely functionalized biomaterials • Design and applications of photoresponsive polymers • Design of self-assembling polymeric systems • Application areas: drug, protein delivery; antibacterials;
micropatterned biomaterials; wound healing; multivalent inhibitors; stem cell differentiation; theranostics
Joseph P. Kennedy – Distinguished Professor of Polymer Science
Ph.D., University of Vienna (Austria), 1954, MBA Rutgers University, 1961
phone: 330-972-7512 e-mail: [email protected]
Synthesis of well-defined macromolecules for potential industrial and biomaterial applications.
William J. Landis – Professor of Polymer Science; G. Stafford Whitby Chair in Polymer Science
Ph.D., Massachusetts Institute of Technology, 1972 phone: 330-972-8483 e-mail: [email protected]
Mineral-matrix structure and interaction in normal and abnormal vertebrate tissues. Bone, cartilage and tendon
biochemistry. Tissue engineering of calcified tissues. Effects of mechanical, gravitational and electromagnetic forces on calcified tissue. Calcium transport in calcification.
Tianbo Liu – A. Schulman Professor of Polymer Science
Ph.D., State University of New York at Stonybrook, 1999 phone: 330-972-3496 e-mail: [email protected]
Solution physical chemistry of macroions, block copolymers, inorganic-organic hybrids, colloids, polyelectrolytes and
biomacromolecules; self-assembly behavior; laser light and X-ray scattering techniques.
Toshikazu Miyoshi – Associate Professor of Polymer Science
Ph.D., Kyoto University, Japan, 1997 Phone: 330-972-6269 e-mail: [email protected]
Solid-state NMR spectroscopy of polymers. Structure and dynamics of polymers, block-copolymers, supramolecules
and polymer blends.
George R. Newkome – Vice President of Research and Dean of the Graduate School, James and Vanita Oelschlager Professor of Science and Technology
Ph.D., Kent State University, 1966 Phone: 330-972-6458 e-mail: [email protected]
Synthetic and structural studies in diverse areas of supra(macro)molecular chemistry, molecular assemblies (dendritic and fractal constructs); nanochemistry; inorganic-organic interfaces; molecular inclusion chemistry; molecular electronics; and photonics.
Coleen Pugh – Professor of Polymer Science
Ph.D., Case Western Reserve University, 1990 Phone: 330-972-6614 e-mail: [email protected]
Synthesis and characterization of novel polymer materials using living polymerizations and new organic reactions:
bromaterials, new curing agents, sustainable materials, liquid crystalline polymers, amphiphilic polymers, hyperbranched polymers, functionalized PLGA and PLA and other molecular architectures.
Darrell H. Reneker – Distinguished Professor of Polymer Science
Ph.D., University of Chicago, 1959 Phone: 330-972-6949 e-mail: [email protected]
Electrospinning of polymer fibers; electrostriction of polymers; polymer nanofibers; polymer physics; computer
modeling of conformation defects polymer crystals, morphology and scanning tunneling microscopy of polymers; electron holography of polymer molecules.
Nita Sahai – Ohio Research Scholar Professor of Polymer Science
PhD., Johns Hopkins University, 1997 Phone: 330-972-5795 e-mail: [email protected]
Molecular- and nano-scale interactions of biological molecules, as well as human and bacterial cells, at solid ceramic and mineral
surfaces, in processes of relevance to surface chemistry, bone biomineralization and tissue engineering, orthopedic biomaterials, supported lipid membranes, the origin of life and biogeochemistry.
Mesfin Tsige – Associate Professor of Polymer Science
Ph.D., Case Western Reserve University, 2001 Phone: 330-972-5631 e-mail: [email protected]
Computational polymer science and soft condensed matter physics. Structure and dynamics of molecules at surfaces
and interfaces. Elastic and failure behavior of thermosetting polymers. Molecular transport through nanostructured materials. Interaction of water with surfaces.
Shi-Qing Wang – Kumho Professor of Polymer Science
Ph.D., University of Chicago, 1987 Phone: 330-971-7108 e-mail: [email protected]
Polymer physics and engineering: experimental and theoretical foundations polymer rheology; general
phenomenology of linear and nonlinear viscoelastic processes; dynamic and yielding behavior; flow instabilities and processing behavior including wall slip
Marcia E. Weidknecht – Instructor of Polymer Science
B.S., University of New Hampshire, 1971 Phone: 330-972-7093 e-mail: [email protected]
Solutions properties and physical properties of macromolecules and polymerization methods.
Chrys Wesdemiotis – Distinguished Professor Chemistry of Polymer Science
Ph.D., Technical University of Berlin, 1979 Phone: 330-972-7699 e-mail: [email protected]
Development and applications of multi-dimensional mass spectrometry and separation-mass spectrometry
methods for the characterization of new synthetic polymers and polymer-biomolecule interactions and interfaces.
Yu Zhu – Assistant Professor of Polymer Science
Ph.D., University of Cologne, 2007 Phone: 330-972-5945 e-mail: [email protected]
Synthesis and assembly of carbon nanomaterials, the use of those novel materials in energy harvesting/storage
devices and nano-electronics. Conjugated polymer synthesis and organic electronics.
Department of Polymer Science Faculty
Matthew L. Becker – Associate Professor of Polymer Science
Ph.D., Washington University, 2003 phone: 330-972-2834 e-mail: [email protected]
Synthesis and characterization of DNA-and peptide- functionalized polymers, surfaces and nanoparticles, tissue
engineering, microwave chemistry, combinatorial methods, functionalized, quantum dots, single wall carbon nanotube purification and biodevices.
Gustavo A. Carri – Associate Professor of Polymer Science
Ph.D., University of Massachusetts-Amherst, 2000 phone: 330-972-7509 e-mail: [email protected]
Statistical mechanics of semiflexible polymers; novel mathematical methods in polymer physics; statistical
physics of helical polymers; Monte Carlo simulations of helical worm-like polymers; biopolymer dynamics in glassy solvents; molecular dynamics simulations of biopolymers; morphologies of nanocomposites via computer simulations.
Stephen Z.D. Cheng – Dean R.C. Musson and Trustees Professor of Polymer Science
Ph.D. Rensselaer Polytechnic Institute, 1985 phone: 330-972-7500 e-mail: [email protected]
Condensed state of polymeric materials; thermodynamics, kinetics of phasetransitions; crystalline structure and
morphology; liquid crystalline and rigirod polymers; surface and interface of polymeric materials; polymer optics.
Steven S.C. Chuang – Professor of Polymer Science
Ph.D. University of Pittsburgh, 1985 phone: 330-972-6993 e-mail: [email protected]
In situ vibrational spectroscopic studies of the reactivity of functional groups in polymers and adsorbed species on catalyst
surfaces. Fabrication of the devices for separation processes and energy generation/storage.
Ali N. Dhinojwala – H.A. Morton Professor of Polymer Science
Ph.D., Northwestern University, 1994 phone: 330-972-6246 e-mail: [email protected]
Professor Dhinojwala’s current research interest is in understanding adhesion, friction, and wetting. His group has
developed light-based spectroscopic techniques to understand physical properties of molecules at surfaces and interfaces. His recent research interest in the areas of bio-adhesion and biomimicry has led to development of synthetic adhesives inspired by geckos and spiders.
Frank Douglas – University Professor of Polymer Science
Ph.D., Cornell University, 1972 phone: 330-572-7544 e-mail: [email protected]
President and CEO, Austen BioInnovation Institute in Akron 1 South Main St., Suite 401, Akron, OH 44308
Mark D. Foster – Associate Dean for Programs, Policy, and Engagement; Director of the Akron Global Polymer Academy; Thomas A. Knowles Professor of Polymer Science
Ph.D., University of Minnesota, 1987 phone: 330-972-5323 e-mail: [email protected]
Microstructure and dynamics of polymer systems, especially in thin films and near interfaces, e.g. surface segregation and adhesion; novel X-ray and neutron scattering techniques, especially small angle scattering and reflectometry, for studying these phenomena.
Welcome to the Department of Polymer Science
Department of Polymer Science Students Students in the department, who represent the United States and numerous foreign countries, pursue Polymer Science degrees within an interdisciplinary curriculum. Students come into the program with backgrounds in chemistry, chemical engineering, physics, materials science and engineering, polymer science, polymer engineering, biology and computer science, often with the support of scholarships and awards, graduate assistantships, and sometimes government fellowships from the National Science Foundation and the National Institutes of Health.
The Polymer Science Student Organization (PSSO) sponsors academic and extracurricular activities, including trips to scientific meetings and research and production facilities of area industries, student seminars, picnics, and weekly intramural events. PSSO has sponsored guest speakers on career development and resume/interview preparation, and the group also directs the Eastman Chemical Company Lecture Series, which brings two researchers to campus each year. PSSO officers (elected annually) serve on a planning committee to provide input on issues within the department, college and University.
Celebrating over 50 Years of Polymers The University of Akron is the center of Akron, Ohio, the Polymer Capital of the World. Since 1956, students and faculty from around the globe have come to UA to focus on polymer innovations and applications of research in science, technology, and medicine. In fact, The University of Akron is the only graduate college in the US that offers both Polymer Science and Polymer Engineering programs. The 25th anniversary of the College was celebrated in 2013.
FINANCIAL AID The department supports all incoming qualified full-time Ph.D. graduate students. For 2014-15 the standard stipend amount for departmental assistantships is $22,000, with some enhanced stipends and industrial fellowships as high as $30,000 for 12 months. Students who receive financial aid also are awarded a tuition scholarship for instructional and general fees. Through grants and contracts awarded to Polymer Science faculty, more than 150 additional students are supported as research assistants.
APPLICATION INFORMATION AND PROCEDURES Students with an undergraduate degree in chemistry, physics or engineering and a GPA of 2.75/4.0 or better may apply online at www.uakron.edu/cpspe/academics/apply-now.dot. Students with a degree in biology or natural sciences usually need additional undergraduate courses in physical and analytical chemistry. For such students a special non-degree admission may be given for one or two semesters, followed by a full admission upon successful completion of the remedial undergraduate courses. A student with a master’s degree from another university may be admitted to the Ph.D. program. Three letters of recommendation are required in such a case to be certain that the student is likely to be successful in doctoral research.
GRADUATE ADMISSIONS REQUIREMENTS FOR THE DEPARTMENT OF POLYMER SCIENCE Persons seeking admission into the Ph.D. program in the Department of Polymer Science are required to submit all of the listed materials to the UA graduate school. Incomplete applications will not be considered under any circumstances.
1. Fully completed on-line Graduate Application
2. Application Fee
3. ALL official undergraduate transcripts and, if applicable, graduate transcripts
4. Three (3) letters of professional recommendation
5. Statement of purpose (personal statement)
6. Submission of Graduate Record Examination (GRE) general test scores (subject exam recommended)
7. All international students must submit official Test of English as a Foreign Language (TOEFL) scores (minimum 550 paper-based; 213 computer-based; or 79 internet-based)
The early consideration application deadline for fall, 2014, is Dec. 15, 2013, for Ph.D. applicants. The final application deadline for both foreign and domestic applicants is Feb. 1, 2014.
Purushottam D. Gujrati – Professor of Physics and Polymer Science
Ph.D., Columbia University, 1979 phone: 330-972-7136 e-mail: [email protected]
Equilibrium and nonequilibrium statistical thermodynamics; phase transitions and critical phenomena; glass transition;
relaxation and aging; polymer solution theory; effects of free-volume, branching, architecture and size disparity; quantum effects in nanoscale motors.
Gary R. Hamed – Professor of Polymer Science
Ph.D., University of Akron, 1978 phone: 330-972-6831 e-mail: [email protected]
Rheology of adhesion; autohesion and tack; brass-rubber adhesion; fracture of rubber; anisotropic rubber;
rubber reinforcement.
Li Jia – Assistant Professor of Polymer Science
Ph.D., Northwestern University, 1996 phone: 330-972-7511 e-mail: [email protected]
Metal-catalyzed polymerizations, supramolecular micelles and elastomers, synthesis of polymeric electronic and
optoelectronic materials, and soft lithography via nanoparticle self-assembly.
Abraham Joy – Assistant Professor of Polymer Science
Ph.D., Tulane University, 2000 phone: 330-972-6004 e-mail: [email protected]
• Development of densely functionalized biomaterials • Design and applications of photoresponsive polymers • Design of self-assembling polymeric systems • Application areas: drug, protein delivery; antibacterials;
micropatterned biomaterials; wound healing; multivalent inhibitors; stem cell differentiation; theranostics
Joseph P. Kennedy – Distinguished Professor of Polymer Science
Ph.D., University of Vienna (Austria), 1954, MBA Rutgers University, 1961
phone: 330-972-7512 e-mail: [email protected]
Synthesis of well-defined macromolecules for potential industrial and biomaterial applications.
William J. Landis – Professor of Polymer Science; G. Stafford Whitby Chair in Polymer Science
Ph.D., Massachusetts Institute of Technology, 1972 phone: 330-972-8483 e-mail: [email protected]
Mineral-matrix structure and interaction in normal and abnormal vertebrate tissues. Bone, cartilage and tendon
biochemistry. Tissue engineering of calcified tissues. Effects of mechanical, gravitational and electromagnetic forces on calcified tissue. Calcium transport in calcification.
Tianbo Liu – A. Schulman Professor of Polymer Science
Ph.D., State University of New York at Stonybrook, 1999 phone: 330-972-3496 e-mail: [email protected]
Solution physical chemistry of macroions, block copolymers, inorganic-organic hybrids, colloids, polyelectrolytes and
biomacromolecules; self-assembly behavior; laser light and X-ray scattering techniques.
Toshikazu Miyoshi – Associate Professor of Polymer Science
Ph.D., Kyoto University, Japan, 1997 Phone: 330-972-6269 e-mail: [email protected]
Solid-state NMR spectroscopy of polymers. Structure and dynamics of polymers, block-copolymers, supramolecules
and polymer blends.
George R. Newkome – Vice President of Research and Dean of the Graduate School, James and Vanita Oelschlager Professor of Science and Technology
Ph.D., Kent State University, 1966 Phone: 330-972-6458 e-mail: [email protected]
Synthetic and structural studies in diverse areas of supra(macro)molecular chemistry, molecular assemblies (dendritic and fractal constructs); nanochemistry; inorganic-organic interfaces; molecular inclusion chemistry; molecular electronics; and photonics.
Coleen Pugh – Professor of Polymer Science
Ph.D., Case Western Reserve University, 1990 Phone: 330-972-6614 e-mail: [email protected]
Synthesis and characterization of novel polymer materials using living polymerizations and new organic reactions:
bromaterials, new curing agents, sustainable materials, liquid crystalline polymers, amphiphilic polymers, hyperbranched polymers, functionalized PLGA and PLA and other molecular architectures.
Darrell H. Reneker – Distinguished Professor of Polymer Science
Ph.D., University of Chicago, 1959 Phone: 330-972-6949 e-mail: [email protected]
Electrospinning of polymer fibers; electrostriction of polymers; polymer nanofibers; polymer physics; computer
modeling of conformation defects polymer crystals, morphology and scanning tunneling microscopy of polymers; electron holography of polymer molecules.
Nita Sahai – Ohio Research Scholar Professor of Polymer Science
PhD., Johns Hopkins University, 1997 Phone: 330-972-5795 e-mail: [email protected]
Molecular- and nano-scale interactions of biological molecules, as well as human and bacterial cells, at solid ceramic and mineral
surfaces, in processes of relevance to surface chemistry, bone biomineralization and tissue engineering, orthopedic biomaterials, supported lipid membranes, the origin of life and biogeochemistry.
Mesfin Tsige – Associate Professor of Polymer Science
Ph.D., Case Western Reserve University, 2001 Phone: 330-972-5631 e-mail: [email protected]
Computational polymer science and soft condensed matter physics. Structure and dynamics of molecules at surfaces
and interfaces. Elastic and failure behavior of thermosetting polymers. Molecular transport through nanostructured materials. Interaction of water with surfaces.
Shi-Qing Wang – Kumho Professor of Polymer Science
Ph.D., University of Chicago, 1987 Phone: 330-971-7108 e-mail: [email protected]
Polymer physics and engineering: experimental and theoretical foundations polymer rheology; general
phenomenology of linear and nonlinear viscoelastic processes; dynamic and yielding behavior; flow instabilities and processing behavior including wall slip
Marcia E. Weidknecht – Instructor of Polymer Science
B.S., University of New Hampshire, 1971 Phone: 330-972-7093 e-mail: [email protected]
Solutions properties and physical properties of macromolecules and polymerization methods.
Chrys Wesdemiotis – Distinguished Professor Chemistry of Polymer Science
Ph.D., Technical University of Berlin, 1979 Phone: 330-972-7699 e-mail: [email protected]
Development and applications of multi-dimensional mass spectrometry and separation-mass spectrometry
methods for the characterization of new synthetic polymers and polymer-biomolecule interactions and interfaces.
Yu Zhu – Assistant Professor of Polymer Science
Ph.D., University of Cologne, 2007 Phone: 330-972-5945 e-mail: [email protected]
Synthesis and assembly of carbon nanomaterials, the use of those novel materials in energy harvesting/storage
devices and nano-electronics. Conjugated polymer synthesis and organic electronics.
Department of Polymer Science Faculty
Matthew L. Becker – Associate Professor of Polymer Science
Ph.D., Washington University, 2003 phone: 330-972-2834 e-mail: [email protected]
Synthesis and characterization of DNA-and peptide- functionalized polymers, surfaces and nanoparticles, tissue
engineering, microwave chemistry, combinatorial methods, functionalized, quantum dots, single wall carbon nanotube purification and biodevices.
Gustavo A. Carri – Associate Professor of Polymer Science
Ph.D., University of Massachusetts-Amherst, 2000 phone: 330-972-7509 e-mail: [email protected]
Statistical mechanics of semiflexible polymers; novel mathematical methods in polymer physics; statistical
physics of helical polymers; Monte Carlo simulations of helical worm-like polymers; biopolymer dynamics in glassy solvents; molecular dynamics simulations of biopolymers; morphologies of nanocomposites via computer simulations.
Stephen Z.D. Cheng – Dean R.C. Musson and Trustees Professor of Polymer Science
Ph.D. Rensselaer Polytechnic Institute, 1985 phone: 330-972-7500 e-mail: [email protected]
Condensed state of polymeric materials; thermodynamics, kinetics of phasetransitions; crystalline structure and
morphology; liquid crystalline and rigirod polymers; surface and interface of polymeric materials; polymer optics.
Steven S.C. Chuang – Professor of Polymer Science
Ph.D. University of Pittsburgh, 1985 phone: 330-972-6993 e-mail: [email protected]
In situ vibrational spectroscopic studies of the reactivity of functional groups in polymers and adsorbed species on catalyst
surfaces. Fabrication of the devices for separation processes and energy generation/storage.
Ali N. Dhinojwala – H.A. Morton Professor of Polymer Science
Ph.D., Northwestern University, 1994 phone: 330-972-6246 e-mail: [email protected]
Professor Dhinojwala’s current research interest is in understanding adhesion, friction, and wetting. His group has
developed light-based spectroscopic techniques to understand physical properties of molecules at surfaces and interfaces. His recent research interest in the areas of bio-adhesion and biomimicry has led to development of synthetic adhesives inspired by geckos and spiders.
Frank Douglas – University Professor of Polymer Science
Ph.D., Cornell University, 1972 phone: 330-572-7544 e-mail: [email protected]
President and CEO, Austen BioInnovation Institute in Akron 1 South Main St., Suite 401, Akron, OH 44308
Mark D. Foster – Associate Dean for Programs, Policy, and Engagement; Director of the Akron Global Polymer Academy; Thomas A. Knowles Professor of Polymer Science
Ph.D., University of Minnesota, 1987 phone: 330-972-5323 e-mail: [email protected]
Microstructure and dynamics of polymer systems, especially in thin films and near interfaces, e.g. surface segregation and adhesion; novel X-ray and neutron scattering techniques, especially small angle scattering and reflectometry, for studying these phenomena.
Welcome to the Department of Polymer Science
Department of Polymer Science Students Students in the department, who represent the United States and numerous foreign countries, pursue Polymer Science degrees within an interdisciplinary curriculum. Students come into the program with backgrounds in chemistry, chemical engineering, physics, materials science and engineering, polymer science, polymer engineering, biology and computer science, often with the support of scholarships and awards, graduate assistantships, and sometimes government fellowships from the National Science Foundation and the National Institutes of Health.
The Polymer Science Student Organization (PSSO) sponsors academic and extracurricular activities, including trips to scientific meetings and research and production facilities of area industries, student seminars, picnics, and weekly intramural events. PSSO has sponsored guest speakers on career development and resume/interview preparation, and the group also directs the Eastman Chemical Company Lecture Series, which brings two researchers to campus each year. PSSO officers (elected annually) serve on a planning committee to provide input on issues within the department, college and University.
Celebrating over 50 Years of Polymers The University of Akron is the center of Akron, Ohio, the Polymer Capital of the World. Since 1956, students and faculty from around the globe have come to UA to focus on polymer innovations and applications of research in science, technology, and medicine. In fact, The University of Akron is the only graduate college in the US that offers both Polymer Science and Polymer Engineering programs. The 25th anniversary of the College was celebrated in 2013.
FINANCIAL AID The department supports all incoming qualified full-time Ph.D. graduate students. For 2014-15 the standard stipend amount for departmental assistantships is $22,000, with some enhanced stipends and industrial fellowships as high as $30,000 for 12 months. Students who receive financial aid also are awarded a tuition scholarship for instructional and general fees. Through grants and contracts awarded to Polymer Science faculty, more than 150 additional students are supported as research assistants.
APPLICATION INFORMATION AND PROCEDURES Students with an undergraduate degree in chemistry, physics or engineering and a GPA of 2.75/4.0 or better may apply online at www.uakron.edu/cpspe/academics/apply-now.dot. Students with a degree in biology or natural sciences usually need additional undergraduate courses in physical and analytical chemistry. For such students a special non-degree admission may be given for one or two semesters, followed by a full admission upon successful completion of the remedial undergraduate courses. A student with a master’s degree from another university may be admitted to the Ph.D. program. Three letters of recommendation are required in such a case to be certain that the student is likely to be successful in doctoral research.
GRADUATE ADMISSIONS REQUIREMENTS FOR THE DEPARTMENT OF POLYMER SCIENCE Persons seeking admission into the Ph.D. program in the Department of Polymer Science are required to submit all of the listed materials to the UA graduate school. Incomplete applications will not be considered under any circumstances.
1. Fully completed on-line Graduate Application
2. Application Fee
3. ALL official undergraduate transcripts and, if applicable, graduate transcripts
4. Three (3) letters of professional recommendation
5. Statement of purpose (personal statement)
6. Submission of Graduate Record Examination (GRE) general test scores (subject exam recommended)
7. All international students must submit official Test of English as a Foreign Language (TOEFL) scores (minimum 550 paper-based; 213 computer-based; or 79 internet-based)
The early consideration application deadline for fall, 2014, is Dec. 15, 2013, for Ph.D. applicants. The final application deadline for both foreign and domestic applicants is Feb. 1, 2014.
Purushottam D. Gujrati – Professor of Physics and Polymer Science
Ph.D., Columbia University, 1979 phone: 330-972-7136 e-mail: [email protected]
Equilibrium and nonequilibrium statistical thermodynamics; phase transitions and critical phenomena; glass transition;
relaxation and aging; polymer solution theory; effects of free-volume, branching, architecture and size disparity; quantum effects in nanoscale motors.
Gary R. Hamed – Professor of Polymer Science
Ph.D., University of Akron, 1978 phone: 330-972-6831 e-mail: [email protected]
Rheology of adhesion; autohesion and tack; brass-rubber adhesion; fracture of rubber; anisotropic rubber;
rubber reinforcement.
Li Jia – Assistant Professor of Polymer Science
Ph.D., Northwestern University, 1996 phone: 330-972-7511 e-mail: [email protected]
Metal-catalyzed polymerizations, supramolecular micelles and elastomers, synthesis of polymeric electronic and
optoelectronic materials, and soft lithography via nanoparticle self-assembly.
Abraham Joy – Assistant Professor of Polymer Science
Ph.D., Tulane University, 2000 phone: 330-972-6004 e-mail: [email protected]
• Development of densely functionalized biomaterials • Design and applications of photoresponsive polymers • Design of self-assembling polymeric systems • Application areas: drug, protein delivery; antibacterials;
micropatterned biomaterials; wound healing; multivalent inhibitors; stem cell differentiation; theranostics
Joseph P. Kennedy – Distinguished Professor of Polymer Science
Ph.D., University of Vienna (Austria), 1954, MBA Rutgers University, 1961
phone: 330-972-7512 e-mail: [email protected]
Synthesis of well-defined macromolecules for potential industrial and biomaterial applications.
William J. Landis – Professor of Polymer Science; G. Stafford Whitby Chair in Polymer Science
Ph.D., Massachusetts Institute of Technology, 1972 phone: 330-972-8483 e-mail: [email protected]
Mineral-matrix structure and interaction in normal and abnormal vertebrate tissues. Bone, cartilage and tendon
biochemistry. Tissue engineering of calcified tissues. Effects of mechanical, gravitational and electromagnetic forces on calcified tissue. Calcium transport in calcification.
Tianbo Liu – A. Schulman Professor of Polymer Science
Ph.D., State University of New York at Stonybrook, 1999 phone: 330-972-3496 e-mail: [email protected]
Solution physical chemistry of macroions, block copolymers, inorganic-organic hybrids, colloids, polyelectrolytes and
biomacromolecules; self-assembly behavior; laser light and X-ray scattering techniques.
Toshikazu Miyoshi – Associate Professor of Polymer Science
Ph.D., Kyoto University, Japan, 1997 Phone: 330-972-6269 e-mail: [email protected]
Solid-state NMR spectroscopy of polymers. Structure and dynamics of polymers, block-copolymers, supramolecules
and polymer blends.
George R. Newkome – Vice President of Research and Dean of the Graduate School, James and Vanita Oelschlager Professor of Science and Technology
Ph.D., Kent State University, 1966 Phone: 330-972-6458 e-mail: [email protected]
Synthetic and structural studies in diverse areas of supra(macro)molecular chemistry, molecular assemblies (dendritic and fractal constructs); nanochemistry; inorganic-organic interfaces; molecular inclusion chemistry; molecular electronics; and photonics.
Coleen Pugh – Professor of Polymer Science
Ph.D., Case Western Reserve University, 1990 Phone: 330-972-6614 e-mail: [email protected]
Synthesis and characterization of novel polymer materials using living polymerizations and new organic reactions:
bromaterials, new curing agents, sustainable materials, liquid crystalline polymers, amphiphilic polymers, hyperbranched polymers, functionalized PLGA and PLA and other molecular architectures.
Darrell H. Reneker – Distinguished Professor of Polymer Science
Ph.D., University of Chicago, 1959 Phone: 330-972-6949 e-mail: [email protected]
Electrospinning of polymer fibers; electrostriction of polymers; polymer nanofibers; polymer physics; computer
modeling of conformation defects polymer crystals, morphology and scanning tunneling microscopy of polymers; electron holography of polymer molecules.
Nita Sahai – Ohio Research Scholar Professor of Polymer Science
PhD., Johns Hopkins University, 1997 Phone: 330-972-5795 e-mail: [email protected]
Molecular- and nano-scale interactions of biological molecules, as well as human and bacterial cells, at solid ceramic and mineral
surfaces, in processes of relevance to surface chemistry, bone biomineralization and tissue engineering, orthopedic biomaterials, supported lipid membranes, the origin of life and biogeochemistry.
Mesfin Tsige – Associate Professor of Polymer Science
Ph.D., Case Western Reserve University, 2001 Phone: 330-972-5631 e-mail: [email protected]
Computational polymer science and soft condensed matter physics. Structure and dynamics of molecules at surfaces
and interfaces. Elastic and failure behavior of thermosetting polymers. Molecular transport through nanostructured materials. Interaction of water with surfaces.
Shi-Qing Wang – Kumho Professor of Polymer Science
Ph.D., University of Chicago, 1987 Phone: 330-971-7108 e-mail: [email protected]
Polymer physics and engineering: experimental and theoretical foundations polymer rheology; general
phenomenology of linear and nonlinear viscoelastic processes; dynamic and yielding behavior; flow instabilities and processing behavior including wall slip
Marcia E. Weidknecht – Instructor of Polymer Science
B.S., University of New Hampshire, 1971 Phone: 330-972-7093 e-mail: [email protected]
Solutions properties and physical properties of macromolecules and polymerization methods.
Chrys Wesdemiotis – Distinguished Professor Chemistry of Polymer Science
Ph.D., Technical University of Berlin, 1979 Phone: 330-972-7699 e-mail: [email protected]
Development and applications of multi-dimensional mass spectrometry and separation-mass spectrometry
methods for the characterization of new synthetic polymers and polymer-biomolecule interactions and interfaces.
Yu Zhu – Assistant Professor of Polymer Science
Ph.D., University of Cologne, 2007 Phone: 330-972-5945 e-mail: [email protected]
Synthesis and assembly of carbon nanomaterials, the use of those novel materials in energy harvesting/storage
devices and nano-electronics. Conjugated polymer synthesis and organic electronics.
Department of Polymer Science Faculty
Matthew L. Becker – Associate Professor of Polymer Science
Ph.D., Washington University, 2003 phone: 330-972-2834 e-mail: [email protected]
Synthesis and characterization of DNA-and peptide- functionalized polymers, surfaces and nanoparticles, tissue
engineering, microwave chemistry, combinatorial methods, functionalized, quantum dots, single wall carbon nanotube purification and biodevices.
Gustavo A. Carri – Associate Professor of Polymer Science
Ph.D., University of Massachusetts-Amherst, 2000 phone: 330-972-7509 e-mail: [email protected]
Statistical mechanics of semiflexible polymers; novel mathematical methods in polymer physics; statistical
physics of helical polymers; Monte Carlo simulations of helical worm-like polymers; biopolymer dynamics in glassy solvents; molecular dynamics simulations of biopolymers; morphologies of nanocomposites via computer simulations.
Stephen Z.D. Cheng – Dean R.C. Musson and Trustees Professor of Polymer Science
Ph.D. Rensselaer Polytechnic Institute, 1985 phone: 330-972-7500 e-mail: [email protected]
Condensed state of polymeric materials; thermodynamics, kinetics of phasetransitions; crystalline structure and
morphology; liquid crystalline and rigirod polymers; surface and interface of polymeric materials; polymer optics.
Steven S.C. Chuang – Professor of Polymer Science
Ph.D. University of Pittsburgh, 1985 phone: 330-972-6993 e-mail: [email protected]
In situ vibrational spectroscopic studies of the reactivity of functional groups in polymers and adsorbed species on catalyst
surfaces. Fabrication of the devices for separation processes and energy generation/storage.
Ali N. Dhinojwala – H.A. Morton Professor of Polymer Science
Ph.D., Northwestern University, 1994 phone: 330-972-6246 e-mail: [email protected]
Professor Dhinojwala’s current research interest is in understanding adhesion, friction, and wetting. His group has
developed light-based spectroscopic techniques to understand physical properties of molecules at surfaces and interfaces. His recent research interest in the areas of bio-adhesion and biomimicry has led to development of synthetic adhesives inspired by geckos and spiders.
Frank Douglas – University Professor of Polymer Science
Ph.D., Cornell University, 1972 phone: 330-572-7544 e-mail: [email protected]
President and CEO, Austen BioInnovation Institute in Akron 1 South Main St., Suite 401, Akron, OH 44308
Mark D. Foster – Associate Dean for Programs, Policy, and Engagement; Director of the Akron Global Polymer Academy; Thomas A. Knowles Professor of Polymer Science
Ph.D., University of Minnesota, 1987 phone: 330-972-5323 e-mail: [email protected]
Microstructure and dynamics of polymer systems, especially in thin films and near interfaces, e.g. surface segregation and adhesion; novel X-ray and neutron scattering techniques, especially small angle scattering and reflectometry, for studying these phenomena.
GRADUATE STUDY IN POLYMER SCIENCE The Department of Polymer Science offers both master’s and doctorate degrees in polymer science.
Students interested in biology-related research may wish to participate in the newly created Integrated Biosciences Ph.D. program. This exciting new Ph.D. program brings together numerous departments to produce a learning experience designed to fill the need for scientists who can think and talk across several fields of scientific inquiry. Please visit www.uakron.edu/id/ib.
TH
E U
NIV
ER
SIT
Y O
F A
KR
ON
THE
UN
IVE
RSI
TY
OF
AK
RO
Nw
ww
.uak
ron.
edu
DE
PAR
TME
NT
OF
PO
LYM
ER
SC
IEN
CE
ww
w.u
akro
n.ed
u/cp
spe
After Graduation Polymer Science graduates go on to productive and successful careers in private industry, government and education. Here’s a sampling of their employers:
JOB PLACEMENT AFTER GRADUATION Department of Polymer Science graduates enjoy a high job placement rate after receiving their degree – 100 percent placement within one year of graduation. This is made possible because most graduates either have secured a job before they graduate, or have one lined up once they’re out of school and ready to begin their career.
n 3M n Advanced Elastomer
Systems n Akron Polymer Systems n Akron Rubber
Development Lab n ALCOA n AMOCO n ATK Space Systems n AT&T Bell Labs n BASF n Ben Venue Laboratories, Inc n BFGoodrich n BP Research n Bridgestone Americas, Inc. n Case Western Reserve
University n Carnegie Mellon University n Chemical Abstracts n Chemtura n Dow Chemical n DuPont n Eastman Chemical Company n Exxon Mobil n Firestone Polymers, LLC n Ford Motor Company n GAF Corporation n The Goodyear Tire &
Rubber Company n Hankook Tire Co., LTD. n Hercules Research n Honeywell n Hyundai Petrochemical n IBM n Ingredron n Johnson & Johnson
n Kumho Tire n LG Chemical n Lexmark n Lubrizol Corporation n The Lord Corporation n Morton Chemical n MRI Medical n NASA n NIST n Ohio Aerospace Institute n Penn State University n Proctor & Gamble n Renssalaer Polytechnic n SABIC n Samsung Electronics n Samyung Corporation n Shell Chemical Company n Shell Oil n Sherwin-Williams n Tektronix n The Timken Company n The University of Akron n Ticona n Tremco n University of California n University of Colorado n University of
Southern Mississippi n University of Tennessee,
Knoxville n U.S. Army n U.S. Naval Air Warfare Center n Virginia Tech n Westinghouse n Xerox n Zeon Chemicals
About The University of Akron The University of Akron offers more than 300 associate, bachelor’s, master’s, doctorate and law degree programs – with accreditations by 35 professional agencies. With nearly 30,000 students and $65 million in research expenditures, UA is among the nation’s strongest public universities focused on innovation, entrepreneurship, and investment in community and economic growth.
Programs are targeted to diverse groups of learners, including full-time, part-time and on-line students, veterans, and adults returning to the classroom. The distinctive Akron Experience enhances post-graduate success through internships and co-ops, academic research (both undergraduate and graduate), study abroad, on-campus student employment, and service projects.
The University of Akron is an Equal Education and Employment Institution © 2013 by The University of Akron / E-0413-32071
Events and Venues Akron, Ohio With a population of nearly 200,000, Akron is Ohio’s fifth-largest city. It offers a vibrant downtown, serene parks, shopping, events and venues that appeal to almost every interest. Its regional location and easy access to air and highway travel puts you at the hub of a world of experiences and opportunities.
Research Facilities An impressive array of research facilities is available. Most of those used by polymer science faculty and staff are located in the 146,000-square-foot Goodyear Polymer Center. More than 50 laboratories are equipped with modern tools for the synthesis of polymers, the study of polymer structure and properties, and the fabrication of new composite materials.
State-of-the-art instrumentation is available for NMR, FTIR and UV-visible spectroscopy; GPC; MALDI-TOF mass spectrometry, thermal analysis; rheo-optics; X-ray diffraction; and scanning probe, electron and fluorescence microscopy; laser capture microdissection, immunohistochemistry and related bioengineering techniques. Molecular modeling research is pursued using a range of powerful software and advanced computing hardware.
Capabilities for biomaterials and biomedical polymer research are growing rapidly. Class II cell and tissue facilities as well as advanced imaging and nanotechnology fabrication capabilities are available. New connections through the Austen BioInnovation Institute are providing greater access to animal facilities and clinical research infrastructure.
n Akron Symphony Orchestra Performs at E.J. Thomas Performing Arts Hall
n Pro Football Hall of Fame n UA’s InfoCision Stadium-Summa Field n Rock and Roll Hall of Fame n Cuyahoga Valley National Park n Annual All-American Soap Box Derby n Akron Aeros Minor League Baseball n Akron Racers Womens Softball n Cleveland Pro Sports:
Browns, Cavaliers and Indians . POLYMERSCIENCE
GRADUATE STUDY
GRADUATE STUDY IN POLYMER SCIENCE The Department of Polymer Science offers both master’s and doctorate degrees in polymer science.
Students interested in biology-related research may wish to participate in the newly created Integrated Biosciences Ph.D. program. This exciting new Ph.D. program brings together numerous departments to produce a learning experience designed to fill the need for scientists who can think and talk across several fields of scientific inquiry. Please visit www.uakron.edu/id/ib.
TH
E U
NIV
ER
SIT
Y O
F A
KR
ON
THE
UN
IVE
RSI
TY
OF
AK
RO
Nw
ww
.uak
ron.
edu
DE
PAR
TME
NT
OF
PO
LYM
ER
SC
IEN
CE
ww
w.u
akro
n.ed
u/cp
spe
After Graduation Polymer Science graduates go on to productive and successful careers in private industry, government and education. Here’s a sampling of their employers:
JOB PLACEMENT AFTER GRADUATION Department of Polymer Science graduates enjoy a high job placement rate after receiving their degree – 100 percent placement within one year of graduation. This is made possible because most graduates either have secured a job before they graduate, or have one lined up once they’re out of school and ready to begin their career.
n 3M n Advanced Elastomer
Systems n Akron Polymer Systems n Akron Rubber
Development Lab n ALCOA n AMOCO n ATK Space Systems n AT&T Bell Labs n BASF n Ben Venue Laboratories, Inc n BFGoodrich n BP Research n Bridgestone Americas, Inc. n Case Western Reserve
University n Carnegie Mellon University n Chemical Abstracts n Chemtura n Dow Chemical n DuPont n Eastman Chemical Company n Exxon Mobil n Firestone Polymers, LLC n Ford Motor Company n GAF Corporation n The Goodyear Tire &
Rubber Company n Hankook Tire Co., LTD. n Hercules Research n Honeywell n Hyundai Petrochemical n IBM n Ingredron n Johnson & Johnson
n Kumho Tire n LG Chemical n Lexmark n Lubrizol Corporation n The Lord Corporation n Morton Chemical n MRI Medical n NASA n NIST n Ohio Aerospace Institute n Penn State University n Proctor & Gamble n Renssalaer Polytechnic n SABIC n Samsung Electronics n Samyung Corporation n Shell Chemical Company n Shell Oil n Sherwin-Williams n Tektronix n The Timken Company n The University of Akron n Ticona n Tremco n University of California n University of Colorado n University of
Southern Mississippi n University of Tennessee,
Knoxville n U.S. Army n U.S. Naval Air Warfare Center n Virginia Tech n Westinghouse n Xerox n Zeon Chemicals
About The University of Akron The University of Akron offers more than 300 associate, bachelor’s, master’s, doctorate and law degree programs – with accreditations by 35 professional agencies. With nearly 30,000 students and $65 million in research expenditures, UA is among the nation’s strongest public universities focused on innovation, entrepreneurship, and investment in community and economic growth.
Programs are targeted to diverse groups of learners, including full-time, part-time and on-line students, veterans, and adults returning to the classroom. The distinctive Akron Experience enhances post-graduate success through internships and co-ops, academic research (both undergraduate and graduate), study abroad, on-campus student employment, and service projects.
The University of Akron is an Equal Education and Employment Institution © 2013 by The University of Akron / E-0413-32071
Events and Venues Akron, Ohio With a population of nearly 200,000, Akron is Ohio’s fifth-largest city. It offers a vibrant downtown, serene parks, shopping, events and venues that appeal to almost every interest. Its regional location and easy access to air and highway travel puts you at the hub of a world of experiences and opportunities.
Research Facilities An impressive array of research facilities is available. Most of those used by polymer science faculty and staff are located in the 146,000-square-foot Goodyear Polymer Center. More than 50 laboratories are equipped with modern tools for the synthesis of polymers, the study of polymer structure and properties, and the fabrication of new composite materials.
State-of-the-art instrumentation is available for NMR, FTIR and UV-visible spectroscopy; GPC; MALDI-TOF mass spectrometry, thermal analysis; rheo-optics; X-ray diffraction; and scanning probe, electron and fluorescence microscopy; laser capture microdissection, immunohistochemistry and related bioengineering techniques. Molecular modeling research is pursued using a range of powerful software and advanced computing hardware.
Capabilities for biomaterials and biomedical polymer research are growing rapidly. Class II cell and tissue facilities as well as advanced imaging and nanotechnology fabrication capabilities are available. New connections through the Austen BioInnovation Institute are providing greater access to animal facilities and clinical research infrastructure.
n Akron Symphony Orchestra Performs at E.J. Thomas Performing Arts Hall
n Pro Football Hall of Fame n UA’s InfoCision Stadium-Summa Field n Rock and Roll Hall of Fame n Cuyahoga Valley National Park n Annual All-American Soap Box Derby n Akron Aeros Minor League Baseball n Akron Racers Womens Softball n Cleveland Pro Sports:
Browns, Cavaliers and Indians . POLYMERSCIENCE
GRADUATE STUDY