REQUIREMENTS SPECIFICATION (RS) VOYAGE DATA RECORDER …

NON CLASSIFICATO / UNCLASSIFIED

The information contained in this document is proprietary to Leonardo S.p.a.. This document and the information contained herein may not be copied, reproduced, used or disclosed in whole or in part in any form without the prior written consent of Leonardo S.p.a..

© Copyright Leonardo S.p.a. – All Rights Reserved

Template: CFM001-T-IT-L en rev. 04.01 of 23


DOCUMENT NUMBER: M19128.01.1017TR

DOCUMENT REVISION: 01.00

DATE: 04/02/2020

CAGE CODE: A1615

REQUIREMENTS SPECIFICATION (RS)

VOYAGE DATA RECORDER (VDR)

N. CDRL: -

Contract No: -

No. pagine /

Nr. of pages Classificazione / Classification

23 NON CLASSIFICATO / UNCLASSIFIED

NON CLASSIFICATO CONTROLLATO / UNCLASSIFIED CONTROLLED

RISERVATO / RESTRICTED

RISERVATISSIMO / CONFIDENTIAL

SEGRETO / SECRET

23 No. totale delle pagine / Total nr. of pages


04/02/2020

M19128.01.1017TR Rev. 01.00

Requirements Specification for the Voyage Data Recorder

(VDR)

Template: CFM001-T-IT-L en rev. 04.01 © Copyright Leonardo S.p.a. – All Rights Reserved of 23


THIS PAGE INTENTIONALLY LEFT BLANK


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



REVISION RECORD

Rev. Modification N. Date Description Author/s

01.00 ---- 04/02/2020 First Issue ----


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



INDEX

1 INTRODUCTION ...................................................................................................................... 7

1.1 Equipment Purpose ....................................................................................................... 7

1.2 Equipment Overview ..................................................................................................... 7

1.3 Document Overview ...................................................................................................... 7

2 REFERENCE DOCUMENTS .................................................................................................... 8

2.1 Applicable Documents .................................................................................................. 8

2.2 Refefenced Documents ................................................................................................. 8

3 DEFINITIONS AND ACRONYMS........................................................................................... 10

3.1 Definitions .................................................................................................................... 10

3.2 Acronyms ..................................................................................................................... 10

4 REQUIREMENTS ................................................................................................................... 12

4.1 Functional Requirements ............................................................................................ 12

4.1.1 Operational Description............................................................................................................ 12

4.1.2 General Requirements on the use of Software ........................................................................ 12

4.1.2.1 Software for Data Downloading and Play Back ........................................................................ 12

4.1.3 Composition ............................................................................................................................. 13

4.1.3.1 Hardware Configuration ............................................................................................................ 13

4.1.3.2 Software Configuration.............................................................................................................. 13

4.1.3.3 Buyer Supplied Parts ................................................................................................................ 13

4.2 Features ....................................................................................................................... 13

4.2.1 Performance Features ............................................................................................................. 13

4.2.1.1 Conditions ................................................................................................................................. 13

4.2.1.2 Overall Performances ............................................................................................................... 13

4.2.1.3 Internal Parts Performances ..................................................................................................... 13

4.2.2 Environmental Requirements ................................................................................................... 13

4.2.2.1 Temperature Ranges ................................................................................................................ 13

4.2.2.2 Salt Fog ..................................................................................................................................... 13

4.2.2.3 DC Magnetic Field Environment ............................................................................................... 14

4.2.2.4 Green Water Loading ................................................................................................................ 14

4.2.2.5 Nuclear Hardening .................................................................................................................... 14

4.2.2.6 Underwater Explosion ............................................................................................................... 14

4.2.2.7 Icing ........................................................................................................................................... 14

4.2.2.8 Dust and Sand .......................................................................................................................... 14

4.2.2.9 Hydrostatic Pressure ................................................................................................................. 14

4.2.2.10 Gun Blast .................................................................................................................................. 14


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



4.2.2.11 Solar Radiation .......................................................................................................................... 14

4.2.2.12 Shock ........................................................................................................................................ 14

4.2.2.13 Humidity .................................................................................................................................... 14

4.2.2.14 Missile Exhaust ......................................................................................................................... 14

4.2.2.15 Wind Effects .............................................................................................................................. 15

4.2.2.16 Vibration .................................................................................................................................... 15

4.2.2.17 Atmospheric Pressure ............................................................................................................... 15

4.2.2.18 Sea Water ................................................................................................................................. 15

4.2.2.19 Ship Motion ............................................................................................................................... 15

4.2.2.20 Static List and Trim ................................................................................................................... 15

4.2.2.21 Rain ........................................................................................................................................... 16

4.2.3 Electromagnetic Compatibility Requirements .......................................................................... 16

4.2.3.1 Electromagnetic Susceptibility .................................................................................................. 16

4.2.3.2 Electromagnetic Emissions ....................................................................................................... 16

4.2.4 Trasportability ........................................................................................................................... 16

4.2.4.1 Altitude (non operating) ............................................................................................................. 16

4.2.4.2 Lifting Devices ........................................................................................................................... 16

4.2.5 Reliability .................................................................................................................................. 16

4.2.5.1 Conditions and Obligations ....................................................................................................... 16

4.2.5.2 Selection of the Components and their use .............................................................................. 16

4.2.5.3 Other Obligations ...................................................................................................................... 16

4.2.5.4 Performances ............................................................................................................................ 16

4.2.5.5 Demonstrations ......................................................................................................................... 16

4.2.6 Maintainability .......................................................................................................................... 17

4.2.6.1 Design Criteria .......................................................................................................................... 17

4.2.6.2 Maintenance Levels Definition .................................................................................................. 17

4.2.6.3 Performances ............................................................................................................................ 17

4.2.6.4 Demonstrations ......................................................................................................................... 17

4.2.7 Testability ................................................................................................................................. 17

4.2.7.1 Functional Description............................................................................................................... 17

4.2.7.2 Performances ............................................................................................................................ 18

4.2.7.3 Demonstrations ......................................................................................................................... 18

4.2.8 Physical Features ..................................................................................................................... 18

4.2.8.1 Sizes and Outlines .................................................................................................................... 18

4.2.8.2 Masses, Centers of Gravity and Moments of Inertia ................................................................. 19

4.2.8.3 Other Physical Features............................................................................................................ 19

4.2.9 Power Supply Features ............................................................................................................ 19

4.2.9.1 Rated Supply Voltage ............................................................................................................... 19


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



4.2.9.2 Power Failures .......................................................................................................................... 19

4.2.9.3 Abnormal Power Supply Conditions ......................................................................................... 19

4.2.10 Heat Exchange Features ......................................................................................................... 19

4.2.10.1 Functional Description............................................................................................................... 19

4.2.10.2 Thermal Load and Operating Temperatures............................................................................. 19

4.2.10.3 Used Fluids and Cooling General Conditions ........................................................................... 19

4.2.11 Interfacing Features ................................................................................................................. 19

4.2.11.1 External Connections ................................................................................................................ 19

4.2.11.2 Grounding and Shielding........................................................................................................... 20

4.2.11.3 Hydraulic Interfaces .................................................................................................................. 20

4.2.11.4 Resilient Mounts ........................................................................................................................ 20

4.2.11.5 Equipment Mounting ................................................................................................................. 20

4.2.12 Design and Construction Constraints ...................................................................................... 20

4.2.12.1 Materials and Finishes .............................................................................................................. 20

4.2.12.2 DC Magnetic Requirements ...................................................................................................... 20

4.2.12.3 Enclosures ................................................................................................................................ 21

4.2.12.4 Elapsed Time Indicators............................................................................................................ 21

4.2.12.5 Electrical Connectors ................................................................................................................ 21

4.2.12.6 Printed Circuits .......................................................................................................................... 21

4.2.13 Nameplates and Product Marking ............................................................................................ 21

4.2.14 Colours ..................................................................................................................................... 21

4.2.15 Interchangeability ..................................................................................................................... 21

4.2.16 Safety ....................................................................................................................................... 22

4.2.16.1 Noise, Airborne and Structure-borne ........................................................................................ 22

4.2.16.2 Chemical and Toxic Substances ............................................................................................... 22

4.2.16.3 Nuclear Control ......................................................................................................................... 22

4.2.16.4 Electrical Protection .................................................................................................................. 22

4.2.17 Security and Privacy ................................................................................................................ 22

4.2.18 Human Engineering ................................................................................................................. 22

4.2.19 Life Cycle ................................................................................................................................. 23

4.3 Documentation ............................................................................................................ 23

4.4 Logistics Related Requirements ................................................................................ 23


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



1 INTRODUCTION

The present Requirements Specification (RS) outlines the project, development, performance and testing requirements for the Voyage Data Recorder (VDR), which is part of the Integrated Navigation (INAV).

1.1 Equipment Purpose

The purpose of the VDR is:

To maintain a store, in a secure and retrievable form, of information concerning the position, movement, physical status, command and control of a ship over the period leading up to and following an incident having an impact thereon.

Information contained in a VDR should be made available to both the Administration and the ship owner. This information is for use during any subsequent safety investigation to identify the cause(s) of the incident.

1.2 Equipment Overview

VDR means a complete system, including:

any items required to interface with the sources of input signals, their processing and encoding;

the final recording medium;

the playback equipment;

the power supply and dedicated reserve power source.

The exchange of data between the VDR and other equipment or Subsystems (S/S) shall be made through external interfaces, which are described later in this document.

1.3 Document Overview

This document is organised as follows:

Section 1: Provides an overview of the VDR and defines the scope of the document;

Section 2: Lists the reference documents drawn upon by this document;

Section 3: Lists the definitions and the acronyms;

Section 4: Defines the functional and non-functional requirements that the VDR must satisfy.


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



2 REFERENCE DOCUMENTS

2.1 Applicable Documents

N.A.

2.2 Refefenced Documents

Ref. Number Title

R1. IEC 61162-1:2010 Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces - Part 1: Single Talker and Multiple Listeners

R2. IEC 61162-2:1998

Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces - Part 2: Single Talker and Multiple Listeners, High-Speed transmission

R3. A.694(17)

General Requirements for Shipborne Radio Equipment Forming Part of the Global Maritime Distress and Safety System (GMDSS) and for Electronic Navigational Aids

R4. MSC.97(73) Adoption of the International Code of Safety for High-Speed Craft, 2000 (2000HSC Code)

R5. MSC.333(90) Adoption of Revised Performance Standards for Shipborne Voyage Data Recorders (VDRs)

R6. IEC 61996-1:2013

Maritime Navigation and Radiocommunication Equipment and Systems - Shipborne Voyage Data Recorder (VDR) - Part 1: Performance Requirements, Methods of Testing and Required Test Results

R7. IEC 60945:2002 Maritime Navigation and Radiocommunication Equipment and Systems – General Requirements – Methods of Testing and Required test Results

R8. IEC 68-2-27 Prove Climatiche e Meccaniche Fondamentali-Prova Ea: Urti

R9. IEC 60529:1989/A2:2013 Gradi di Protezione degli Involucri (Codice IP)

R10. STANAG 1008 Ed. 9 Characteristics of Shipboard Electrical Power Systems in Warships of the North Atlantic Treaty Navies

R11. STANAG 2895 Extreme Climatic Conditions and Derived Conditions for Use in Defining Design/Test Criteria for NATO Forces Material

R12. DOD-STD-1399 Section 070, Pt. 1 Interface Standard for Shipboard Systems, Section 070, Part 1, D.C. Magnetic Field Environment.

R13. FED-STD 595B Colors Used in Government Procurement


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



Ref. Number Title

R14. MIL-STD-2036A General Requirements for Electronic Equipment Specification

R15. MIL-STD-1310F Shipboard Bonding, Grounding, and other Techniques for Electromagnetic Compatibility and Safety

R16. MIL-HDBK-217F Reliability Prediction of Electronic Equipment

R17. MIL-HDBK-454 M General Requirements for Electronic Equipment

R18. NPRD-95 Non-electronic Parts Reliability Data

R19. IPC-D-275 Designed Standard for Rigid Printed Boards and Rigid Printed Board Assemblies

R20. MM/STD-5A Documentazione Tecnica di Interfaccia/Installazione

R21. MM/STD-6 Marcatura di Identificazione Apparati

R22. Regulation EC 1005/2009 Montreal Protocol on substances that deplete the ozone layer

R23. Directive 2011/65/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)

R24. Regulation EC 1907/2006

Regulation EC 1907/2006 of European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)

R25. Legge 27 Marzo 1992 n. 257 Norme relative alla cessazione dell'impiego dell'amianto e successive modifiche

R26. Directive 2006/95/EC

Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the Harmonisation of the Laws of Member States relating to Electrical Equipment Designed for use within Certain Voltage Limits


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



3 DEFINITIONS AND ACRONYMS

3.1 Definitions

N.A.

3.2 Acronyms

Acronym Description

AQAP Allied Quality Assurance Publications

BITE Built-In Test Equipment

CDRL Contract Deliverable Requirements List

CMP Configuration Management Plan

COTS Commercial Off The Shelf

DOD Department Of Defense

GQAR Government Quality Assurance Representative

HDBK Handbook

HMI Human Machine Interface

IEC International Electrotechnical Commission

IMO International Maritime Organization

INAV Integrated NAVigation

IPT Integrated Product Team

ISO International Standardization Organization

LRU Line Replacement Unit

MM Marina Militare

MTBF Mean Time Between Failures

MTTR Mean Time to Repair

N.A. Non Apllicabile

NC Non Conformity

NATO North Atlantic Treaty Organization

NMEA National Marine Electronics Association

OCCAR Organisation Conjointe de Coopération en matière d’Armement

Pj/N Project Number

PLOC Plancia Operativa di Combattimento


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



Acronym Description

PPA Multipurpose Patrol Vessel

QP Quality Plan

RMP Risk Management Plan

RS Requirements Specification

SdC Sistema di Combattimento

S/S Sottosistema

STANAG STANdardization AGreement

STD Standard

VDR Voyage Data Recorder


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



4 REQUIREMENTS

The functional requirements, non-functional and performance requirements for the VDR equipment are described in the following paragraphs.

4.1 Functional Requirements

[RS_VDR_0000]

The Voyage Data Recorder (VDR) shall have features and functionality complying with the following IMO resolutions:

A694(17);

MSC.97(73);

MSC.333(90);

and with the following IEC norm:

IEC 61996.

[End of requirement]

[RS_VDR_0010]

The VDR shall provide an interface for downloading the stored data and play back the information to an external computer. The interface shall be compatible with an internationally recognized format, such as Ethernet, USB, FireWire, or equivalent. It shall be possible to perform a download of the recorded data for a user-defined period of time.


4.1.1 OPERATIONAL DESCRIPTION

[RS_VDR_0140]

Management operations, configuration and control of the VDR shall be made by means of a Human Machine Interface (HMI).


4.1.2 GENERAL REQUIREMENTS ON THE USE OF SOFTWARE

4.1.2.1 Software for Data Downloading and Play Back

[RS_VDR_0150]

A copy of the software program providing the capability to download the stored data and play back the information onto a connected external laptop computer and for the playback of the data shall be provided for the VDR installation.


[RS_VDR_0160]

The software shall be compatible with an operating system available with commercial-off-the-shelf laptop computers and provided on a portable storage device such as a CD-ROM, DVD, USB-


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



memory stick, etc.


4.1.3 COMPOSITION

4.1.3.1 Hardware Configuration

N.A.

4.1.3.2 Software Configuration

N.A.

4.1.3.3 Buyer Supplied Parts

N.A.

4.2 Features

4.2.1 PERFORMANCE FEATURES

4.2.1.1 Conditions

The VDR functional performances shall be guaranteed within the ranges specified for the environmental requirements referred to in Par. 4.2.2.

4.2.1.2 Overall Performances

N.A.

4.2.1.3 Internal Parts Performances

N.A.

4.2.2 ENVIRONMENTAL REQUIREMENTS

4.2.2.1 Temperature Ranges

[RS_VDR_0210]

The components of the VDR shall ensure proper operation, without damage or performance degradation, within the temperature conditions set by IEC 60945.


4.2.2.2 Salt Fog

[RS_VDR_0250]

The materials used for the construction of the VDR and the related treatments shall be such as to allow the equipment operation in a salty environment, in accordance with IEC 60945.



04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



4.2.2.3 DC Magnetic Field Environment

N.A.

4.2.2.4 Green Water Loading

N.A.

4.2.2.5 Nuclear Hardening

N.A.

4.2.2.6 Underwater Explosion

N.A.

4.2.2.7 Icing

N.A.

4.2.2.8 Dust and Sand

N.A.

4.2.2.9 Hydrostatic Pressure

N.A.

4.2.2.10 Gun Blast

N.A.

4.2.2.11 Solar Radiation

[RS_VDR_0290]

The components of the VDR installed and operating outside shall be able to function properly when exposed to a solar radiation defined by IEC 60945.


4.2.2.12 Shock

N.A.

4.2.2.13 Humidity

[RS_VDR_0310]

The components of the VDR shall ensure proper operation, without damage or performance degradation, within the humidity conditions set by IEC 60945.


4.2.2.14 Missile Exhaust

N.A.


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



4.2.2.15 Wind Effects

N.A.

4.2.2.16 Vibration

[RS_VDR_0330]

The components of the VDR shall be able to function properly when subjected to vibrations in accordance with the requirements of IEC 60945.


4.2.2.17 Atmospheric Pressure

N.A.

4.2.2.18 Sea Water

N.A.

4.2.2.19 Ship Motion

[RS_VDR_0350]

The VDR shall ensure its full performance under the following nominal conditions:

Roll: ± 10°, period 10 s

Pitch: ± 3°, period 5 s


[RS_VDR_0360]

The VDR shall be allowed to suffer a performance degradation under the following exceptional conditions:

Roll: ± 22,5°, period 10 s

Pitch: ± 10°, period 5 s


4.2.2.20 Static List and Trim

[RS_VDR_0370]

The VDR shall resistto a static inclination of the ship equal to:

List: ± 15 deg;

Trim: ± 5 deg.

The two conditions can exist simultaneously. It is allowed a possible performance degradation, but no safety impact.



04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



4.2.2.21 Rain

N.A.

4.2.3 ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS

4.2.3.1 Electromagnetic Susceptibility

[RS_VDR_0390]

The components of the VDR shall comply with IEC 60945 Chapter 10 (Immunity to Electromagnetic Environment).


4.2.3.2 Electromagnetic Emissions

[RS_VDR_0400]

The components of the VDR shall comply with IEC 60945 Chapter 9 (Electromagnetic Emission).


4.2.4 TRASPORTABILITY

4.2.4.1 Altitude (non operating)

N.A.

4.2.4.2 Lifting Devices

N.A.

4.2.5 RELIABILITY

4.2.5.1 Conditions and Obligations

N.A.

4.2.5.2 Selection of the Components and their use

N.A.

4.2.5.3 Other Obligations

N.A.

4.2.5.4 Performances

N.A.

4.2.5.5 Demonstrations

N.A.


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



4.2.6 MAINTAINABILITY

4.2.6.1 Design Criteria

N.A.

4.2.6.2 Maintenance Levels Definition

[RS-VDR-0460]

Maintenance activities defined by the Final Customer (MM) for the VDR are organized into five levels:

On board:

o 1st level: maintenance operations are carried out by means of on board resources;

o 2nd level alfa: maintenance operations are performed by on board crew with support of ashore personnel.

Ashore:

o 2nd level bravo: maintenance operations are carried out on board by means of ashore resources;

o 3rd level: maintenance operations are carried out by ashore personnel or ashore resources, without intervention of the on board resources. Maintenance is carried out both on board and ashore and, potentially, also with support from the equipment Supplier;

o 4th level: maintenance operations are carried out at the equipment Suppliers’s premises, with its direct involvement.



[RS-VDR-0470]

The Mean Time To Repair (MTTR) value for the VDR shall be ≤ 60 minutes.



N.A.

4.2.7 TESTABILITY

4.2.7.1 Functional Description

[RS_VDR_0480]

The VDR shall implement Built In Test Equipment function (BITE).

The BITE function shall be designed for the following purposes:

fast and reliable detection of faults with the fault isolation up to the level of the relevant LRU;


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



automatic, periodic equipment check;

continuous performance monitoring.

The disruption of the BITE circuitry shall not affect other operational functions.

The BITE function shall be:

On-Line: performed during normal operation, without affecting the operational functions and the system performances;

Off-Line: performed during preventive maintenance.



[RS_VDR_0500]

The BITE shall detect no less than:

85% of failures trough on-line BITE;

90% of failures trough on-line and off-line BITE;

100% of safety critical failures.

Hidden failures, not detected by the BITE, shall be investigable by using manual test procedures and external means, if necessary.


[RS_VDR_0510]

The BITE shall be able to:

Isolate faults down to 1 LRU for more than 80% of the detectable failures (through on line or off line tests).

Isolate fault down to a maximum of 3 LRUs for more than 95% of the detected failures (through on line or off line tests).

In case of BITE ambiguity in the isolation of the failed LRU, this shall be isolated using manual test procedures and external means, if necessary.



N.A.

4.2.8 PHYSICAL FEATURES

4.2.8.1 Sizes and Outlines

N.A.


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



4.2.8.2 Masses, Centers of Gravity and Moments of Inertia

N.A.

4.2.8.3 Other Physical Features

N.A.

4.2.9 POWER SUPPLY FEATURES

4.2.9.1 Rated Supply Voltage

N.A.

4.2.9.2 Power Failures

[RS_VDR_0540]

The components of the VDR shall ensure a hold-down time of the power microinterruptions up to 5 ms.


4.2.9.3 Abnormal Power Supply Conditions

N.A.

4.2.10 HEAT EXCHANGE FEATURES

4.2.10.1 Functional Description

N.A.

4.2.10.2 Thermal Load and Operating Temperatures

N.A.

4.2.10.3 Used Fluids and Cooling General Conditions

N.A.

4.2.11 INTERFACING FEATURES

4.2.11.1 External Connections

[RS_VDR_0570]

All the external connections shall be easily accessible and removable.


[RS_VDR_0580]

All external connections shall be made by means of connectors or cable glands.

The connectors and cable glands seals shall be able to ensure the required degree of waterproofing to the relative enclosure.


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)




[RS_VDR_0590]

Each connection shall be protected with plastic or metal shells during transport.


4.2.11.2 Grounding and Shielding

N.A.

4.2.11.3 Hydraulic Interfaces

N.A.

4.2.11.4 Resilient Mounts

[RS_VDR_0610]

The components of the VDR, if necessary, shall be fitted with suitable shock-absorbers.

Metallic shock-absorbers shall be preferred to synthetic ones, as applicable.


4.2.11.5 Equipment Mounting

[RS_VDR_0620]

The mounting for the internal components of the VDR shall be provided in the following forms, in relation to the type of the specific unit:

Rack mounted or Console mounted;

Bracket mounted or Bulkhead mounted.


[RS_VDR_0630]

The mounting for the external components of the VDR shall be provided in the following forms, in relation to the type of the specific unit:

Bulkhead mounted or Deck mounted.


4.2.12 DESIGN AND CONSTRUCTION CONSTRAINTS

4.2.12.1 Materials and Finishes

N.A.

4.2.12.2 DC Magnetic Requirements

N.A.


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



4.2.12.3 Enclosures

[RS_VDR_0670]

The components of the VDR installed outside shall ensure an IP66 sealing degree, in accordance with IEC 60529.


[RS_VDR_0680]

The components of the VDR installed inside shall ensure a IP44 sealing degree, in accordance with IEC 60529.


4.2.12.4 Elapsed Time Indicators

N.A.

4.2.12.5 Electrical Connectors

N.A.

4.2.12.6 Printed Circuits

N.A.

4.2.13 NAMEPLATES AND PRODUCT MARKING

N.A.

4.2.14 COLOURS

N.A.

4.2.15 INTERCHANGEABILITY

[RS_VDR_0730]

The VDR shall be manufactured with modular techniques, in order to facilitate interchangeability.


[RS_VDR_0740]

Assemblies and units making up the VDR shall be easily accessible and removable by simple operations and replaceable with assemblies of equal identification number, without it being necessary to remove other parts not failed, or perform mechanical rework and/or electrical calibrations.

The system shall provide for measures to prevent erroneous module replacements, which can belong to one or more of the following categories:

mechanical protection (eg.: polarizing devices);

identification plates and labeling, to uniquely identify the part associated with each mounting position;


04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



maintenance procedures that support the maintainer with diagrams/drawings showing the association between the parts and their installation position.


4.2.16 SAFETY

[RS_VDR_0750]

The VDR shall meet the safety requirements according to IEC 60945.


4.2.16.1 Noise, Airborne and Structure-borne

[RS_VDR_0760]

The VDR shall meet the acoustic noise requirements according to IEC 60945.


4.2.16.2 Chemical and Toxic Substances

[RS_VDR_0770]

The VDR, where applicable, shall comply with the requirements set out in the Rules, Guidelines and Laws in Ref. R22, R23, R24 e R25.


4.2.16.3 Nuclear Control

[RS_VDR_0780]

The VDR shall not make use of Nuclear Components.


4.2.16.4 Electrical Protection

[RS_VDR_0790]

The VDR shall comply with the requirements set out by the Directive in Ref. R26 and by IEC 60945.


4.2.17 SECURITY AND PRIVACY

N.A.

4.2.18 HUMAN ENGINEERING

[RS_VDR_0800]

The VDR shall apply the criteria set by IEC 60945.



04/02/2020

M19128.01.1017TR Rev. 01.00


(VDR)



4.2.19 LIFE CYCLE

N.A.

4.3 Documentation

[RS_VDR_0810]

The VDR shall apply the criteria of IEC 60945, relating to the implementation of operational and maintenance manuals.


4.4 Logistics Related Requirements

N.A.

REQUIREMENTS SPECIFICATION (RS) VOYAGE DATA RECORDER …

Documents

Transcript of REQUIREMENTS SPECIFICATION (RS) VOYAGE DATA RECORDER …