Análisis Locuciones Latinas: "Ad Hóminem" - "Ad Infinitum" - "Ad Honorem"
Request form Walter Xpress milling tools...AD..10T3 AD..1204 AD..1606 AD..1807 If it is possible,...
2
Request form Walter Xpress milling tools Scale quantities: 1 2 3 4 5 10 20 Workpiece data: Tool data: To: Walter sales company Shipment of the tool within 3 weeks from Germany.Additional information about Walter Xpress you will find at www.walter-tools.com comments: Doc. GEP-QF00-06/03.06.2013/Rev. 10 All fields with light green background are necessary for tool design. All additional definitions are optional. workpiece material: specific features: tenacity / hardness: roughing F 5041, F 5141, F 5241 (Blaxx™) M 3016 heavy duty milling M 4000 shoulder/face milling M4002, M4003, M4005, M4130, M4132, M4900 M 4574 chamfer milling T271* Thread milling F 4042 (Xtra-tec®) finishing *1 exclusively corner radius of stock inserts possible *2 maximum number of teeth z depends on the cutting diameter and the selected insert size Company Customer No. Contact person Address Country Phone Fax E-Mail D c -range: 10 mm to 62 mm for cylindrical shanks and ScrewFit. 10 mm to 84 mm for HSK, SK und NCT. 40 mm to 250 mm for cylindrical hole adaptions. AD..0803 AD..10T3 AD..1204 AD..1606 AD..1807 D C = l 4 = [mm] [mm] L C = [mm] Z *2 =
Transcript of Request form Walter Xpress milling tools...AD..10T3 AD..1204 AD..1606 AD..1807 If it is possible,...
-
Request form Walter Xpress milling tools
Scale quantities: 1 2 3 4 5 10 20
Workpiece data:
Tool data:
To:Walter sales company
Shipment of the tool within 3 weeks from Germany.Additional information about Walter Xpress you will find atwww.walter-tools.com
comments:
Doc
. GE
P-Q
F00-
06/0
3.06
.201
3/R
ev. 1
0
All fields with light green background are necessary for tool design. All additional definitions are optional.
workpiece material:
specific features:
tenacity / hardness:
roughing
F 5041, F 5141, F 5241 (Blaxx™)
M 3016 heavy duty milling
M 4000 shoulder/face millingM4002, M4003, M4005, M4130, M4132, M4900
M 4574 chamfer millingT271* Thread milling
F 4042 (Xtra-tec®)
finishing
*1 exclusively corner radius of stock inserts possible*2 maximum number of teeth z depends on the cutting diameter and the selected insert size
Company Customer No.
Contact person
Address
Country
Phone Fax
E-Mail
Typ = [mm] P
P26300-06P26300-09P26300-11P26300-14
P =
LT =
[mm] 1,5-6mm/18-4TPI
[mm]
>M24 / UNC1
min. 3 - max. 8
min. 1 - max. 4
DN =
Li =
x=
[mm]
[mm]
[mm]
Z =
# of rows =
optional input *1,2:
x LT
L i
DN
i = [mm]
iDc-range: 22 mm to 62 mm for cylindrical shanks and ScrewFit.22 mm to 84 mm for HSK, SK and NCT.40 mm to 250 mm for cylindrical hole adaptions.
LN..0904LN..1306LN..1607
Dc =
l4 = [mm]
[mm]
Lc = [mm]
Z*2 =
Dc-range: 16 mm to 62 mm for cylindrical shanks and ScrewFit.16 mm to 84 mm for HSK, SK and NCT.40 mm to 250 mm for cylindrical hole adaptions.
Kappa: allowed values from 10° to 89,5°
Kappa: only 90° allowed
SD..06..SD..09..SD..12..
LD..08..LD..14..LD..17..K = [ ° ]
Dc =
l4 = [mm]
[mm]
Lc = [mm]
Z*2 =
Dc-range: 8 mm to 240 mmlges max. 300mm
Kappa: allowed values from 15° to 75°
SD..06..SD..09..SD..12..K = [ ° ]
Dc
Da
Lcl4
Dc =
l4 = [mm]
[mm]
Lc = [mm]
Z*2 =
Dc-range: 125 mm to 350 mm for cylindrical hole adaptionsdia. 40; 50; ISO40B; ISO50B; ISO50/60BB
Kappa: only these values are allowed: 15°, 45°, 60°, 75°, 90°
LNMX201012R-F27TLNMX201012R-F57T
K = [ ° ]
Dc =
l4 = [mm]
[mm]
Lc = [mm]
Z*2 =
Dc-range: 10 mm to 62 mm for cylindrical shanks and ScrewFit.10 mm to 84 mm for HSK, SK und NCT.40 mm to 250 mm for cylindrical hole adaptions.
AD..0803AD..10T3AD..1204AD..1606AD..1807
Dc =
l4 = [mm]
[mm]
Lc = [mm]
Z*2 =
-
If it is possible, add drawing of unmachined and machined part
After testing your inquiry on technical feasibility, you get immediately an answer.
Shipment of the tool within 3 weeks from Germany.Additional information about Walter Xpress you will find atwww.walter-tools.com
comments:
All fields with light green background are necessary for tool design. All additional definitions are optional.
If the tool cannot be processed as Xpress, it will be processed as special tool with a longer delivery time.
Doc
. GE
P-Q
F00-
06/0
3.06
.201
3/R
ev. 1
0
Adaption:
SK DIN 69871 Size d1:
Size d1:
Size d1:
Size d1:
Size d1:
Size d1: Size d1:
Size d1:
Adaption type: Adaption type:Adaption type:
HSK DIN 69893 cylindrical shank DIN 1835
Capto
cylindrical hole DIN138 cylindrical hole DIN138
*1 Limit depends on insert size
ScrewFit NCT
40
C3
50
ISO30B
16
T09 25
16
A AAAD BC
50
C4
C5
C6*3
63
ISO40B
20
T14 32
22
80
ISO50B*2
25
T18 40
27
40
T28 50
32
100
ISO50/60BB*2
32
T22
50
T36 63
40
B DAD/B El4min = 67mm*1l4max = 125mm*1
l4min = 53mm*1l4max = 115mm*1
l4min = 34mm*1l4max = 75mm*1
l4min = 38mm*1l4max = 110mm*1
l4min = 38mm*1l4max = 110mm*1
l4min = 53mm*1l4max = 115mm*1
l4min = 57mm*1l4max = 125mm*1
l4min = 29mm*1l4max = 96mm*1
T45 80
50
*3 maximum Dc = 62mm
*2: without inner coolant
Check Box 1: OffCheck Box 2: OffCheck Box 3: OffCheck Box 4: OffCheck Box 5: OffCheck Box 6: OffCheck Box 7: OffWSC: rbtBearbeitung: Offrbt1: 5Text Field 7: Text Field 10: Text Field 8: Combo Box 4: [N/mm²]Firma 3: Telefon 3: Ansprechpartner 3: Anschrift 3: Stadt 3: Email 3: Kundennummer 3: Text Field 11: Combo Box 5: [M (metrisches ISO Gewinde DIN 13, 60°)]rbtWSP: OffGewindesteigung 2: Text Field 17: txtL10: txtL11: txtDc 7: txtZ 7: txtZ 8: txtL12: txtL9: txtDc 6: txtLc 6: txtZ 6: txtK M4000: txtL8: txtDc 5: txtLc 5: txtZ 5: txtK M4001: txtL7: txtDc 4: txtLc 4: txtZ 4: txtK M3016: txtL6: txtDc 3: txtLc 3: txtZ 3: txtL5: txtDc 2: txtLc 2: txtZ 2: rbtSchaft: OffrbtSchaftTyp: OffRadio Button 15: OffText Field 13:
