Report on TATA NANO

27
NANYANG TECHNOLOGICAL UNIVERSITY SCHOOL OF MECHANICAL AND AEROSPACE ENGINEERING MANAGEMENT OF TECHNOLOGY AND INNOVATION STRATEGIC INNOVATIONS PROJECT 2010-2011 Team Members Nagalingam Chellaiah Dhanasekhar (G0803363H) Samajdar Shantanu (G0900774J) Senjivel Senthil Kumaran (G0900779E)

Transcript of Report on TATA NANO

Page 1: Report on TATA NANO

NANYANG TECHNOLOGICAL UNIVERSITY

SCHOOL OF MECHANICAL AND AEROSPACE ENGINEERING

MANAGEMENT OF TECHNOLOGY AND INNOVATION

STRATEGIC INNOVATIONS PROJECT

2010-2011

Team Members

Nagalingam Chellaiah Dhanasekhar (G0803363H)

Samajdar Shantanu (G0900774J)

Senjivel Senthil Kumaran (G0900779E)

Page 2: Report on TATA NANO

INDEX NO. TABLE OF CONTENTS PAGE NO.

1. INTRODUCTION 1

2. COMPANY PROFILE 2

2.1 TATA GROUP AND ITS SUBSIDIARIES 5

3. ORGANIZATIONAL INNOVATIONS

SYSTEM 5

3.1 PRODUCTS 5

3.2 PROCESS 7

3.3 PEOPLE 8

4 INTRODUCTION TO THE NEW PRODUCT 10

DEVELOPMENT

5. INNOVATIONS INCORPORATED IN TATA

NANO 16

4.1 STRATEGIC INNOVATION 16

4.2 HOLISTIC INNOVATION 17

4.3 FOCUSSED INNOVATION 18

6 CHALLENGES FACED DURING THE

DEVELOPMENT OF TATA NANO 22

7 FUTURE OF TATA NANO 24

8 CONCLUSION 25

Page 3: Report on TATA NANO

1

1. INTRODUCTION:

Seldom do we see cars that rewrite the history books even before they are seen

running around on the roads. And hardly ever do we see cars that vow to put the nation on

four wheels. The Tata Nano is one such car that has been in the news for quite a few years,

for reasons good and evil. Nano is a car which has breathed into life due to one man. Give

credit to Mr. Ratan Tata for his determination to build a low cost family car that has come

true, finally. Took long it did, but the Nano came in a beautiful form. Touted as world‘s

cheapest car by a far cry, Nano has been the talk of the town around the globe. Head honchos

of big organizations have been pouring in by numbers to have a look at this engineering

master piece. Nano as a part of a "new breed of 21st-century cars" that embody "a contrarian

philosophy of smaller, lighter, cheaper" and portend a new era in inexpensive personal

transportation and potentially, "global gridlock". The Wall Street Journal confirms a global

trend toward small cars, led by the Nano. The prefix "Nano" derives from the Greek root

'Nano‘s', meaning dwarf as with nanometer. "Nano" also means "small" in Gujarati, the

native language of the Tata family, founders of the Tata Group.

The project to create a 1 lakh rupees (3000SGD) car began in 2003, under the

Chairman of Tata Motors, Ratan Tata. The strategy behind the project was the awareness of

the number of Indian families who had two wheeled transport, but couldn't afford a four

wheel car, and was based on the company's success in producing the low cost 4 wheeled Ace

truck in May 2005.

To discuss the innovation strategy for Tata Nano, we first discuss the constraints as

per which the company had to operate.

In pursuit of excellence and to keep up to the initial promise made to people that

Tata will come out with a compact, quality car within a price tag of Rs. 1 lakhs(3000 SGD),

Tata Motors came up with a design, marketing and operational strategy keeping in my mind

the constraints of:

Price

Market Scalability

Customer aspiration

Resource efficiency

Page 4: Report on TATA NANO

2

2. COMPANY PROFILE:

Tata Motors Limited is India's largest automobile company, with consolidated revenues

of USD 14 billion in 2008-09. It is the leader in commercial vehicles in each segment, and

among the top three in passenger vehicles with winning products in the compact, midsize car

and utility vehicle segments. The company is the world's fourth largest truck manufacturer,

and the world's second largest bus manufacturer.

The company's 24,000 employees are guided by the vision to be "best in the manner in which

we operate best in the products we deliver and best in our value system and ethics."

Established in 1945, Tata Motors' presence indeed cuts across the length and breadth of India.

Over 4 million Tata vehicles ply on Indian roads, since the first rolled out in 1954. The

company's manufacturing base in India is spread across Jamshedpur (Jharkhand), Pune

(Maharashtra), Lucknow (Uttar Pradesh), Pantnagar (Uttarakhand) and Dharwad (Karnataka).

Following a strategic alliance with Fiat in 2005, it has set up an industrial joint venture with

Fiat Group Automobiles at Ranjangaon (Maharashtra) to produce both Fiat and Tata cars and

Fiat powertrains. The company is establishing a new plant at Sanand (Gujarat). The

company's dealership, sales, services and spare parts network comprises over 3500 touch

points. Tata Motors also distributes and markets Fiat branded cars in India.

Tata Motors, the first company from India's engineering sector to be listed in the New York

Stock Exchange (September 2004), has also emerged as an international automobile

company. Through subsidiaries and associate companies, Tata Motors has operations in the

UK, South Korea, Thailand and Spain. Among them is Jaguar Land Rover, a business

comprising the two iconic British brands that was acquired in 2008. In 2004, it acquired the

Daewoo Commercial Vehicles Company, South Korea's second largest truck maker. The

rechristened Tata Daewoo Commercial Vehicles Company has launched several new

products in the Korean market, while also exporting these products to several international

markets. Today two-thirds of heavy commercial vehicle exports out of South Korea are from

Tata Daewoo. In 2005, Tata Motors acquired a 21% stake in Hispano Carrocera, a reputed

Spanish bus and coach manufacturer, and subsequently the remaining stake in 2009.

Hispano's presence is being expanded in other markets. In 2006, Tata Motors formed a joint

venture with the Brazil-based Marcopolo, a global leader in body-building for buses and

coaches to manufacture fully-built buses and coaches for India and select

Page 5: Report on TATA NANO

3

international markets. In 2006, Tata Motors entered into joint venture with Thonburi

Automotive Assembly Plant Company of Thailand to manufacture and market the company's

pickup vehicles in Thailand. The new plant of Tata Motors (Thailand) has begun production

of the Xenon pickup truck, with the Xenon having been launched in Thailand in 2008.

Tata Motors is also expanding its international footprint, established through exports since

1961. The company's commercial and passenger vehicles are already being marketed in

several countries in Europe, Africa, the Middle East, South East Asia, South Asia and South

America. It has franchisee/joint venture assembly operations in Kenya, Bangladesh, Ukraine,

Russia, Senegal and South Africa.

The foundation of the company's growth over the last 50 years is a deep understanding of

economic stimuli and customer needs, and the ability to translate them into customer-desired

offerings through leading edge R&D. With over 3,000 engineers and scientists, the

company's Engineering Research Centre, established in 1966, has enabled pioneering

technologies and products. The company today has R&D centers in Pune, Jamshedpur,

Lucknow, Dharwad in India, and in South Korea, Spain, and the UK. It was Tata Motors,

which developed the first indigenously developed Light Commercial Vehicle, India's first

Sports Utility Vehicle and, in 1998, the Tata Indica, India's first fully indigenous passenger

car. Within two years of launch, Tata Indica became India's largest selling car in its segment.

In 2005, Tata Motors created a new segment by launching the Tata Ace, India's first

indigenously developed mini-truck.

In January 2008, Tata Motors unveiled its People's Car, the Tata Nano, which India and the

world have been looking forward to. The Tata Nano has been subsequently launched, as

planned, in India in March 2009. A development, which signifies a first for the global

automobile industry, the Nano brings the comfort and safety of a car within the reach of

thousands of families. The standard version has been priced at USD 2500 (excluding VAT

and transportation cost).

Designed with a family in mind, it has a roomy passenger compartment with generous leg

space and head room. It can comfortably seat four persons. Its mono-volume design will set a

new benchmark among small cars. Its safety performance exceeds regulatory requirements in

India. Its tailpipe emission performance too exceeds regulatory requirements. In terms

of overall pollutants, it has a lower pollution level than two-wheelers being

Page 6: Report on TATA NANO

4

manufactured in India today. The lean design strategy has helped minimize weight, which

helps maximize performance per unit of energy consumed and delivers high fuel efficiency.

The high fuel efficiency also ensures that the car has low carbon dioxide emissions, thereby

providing the twin benefits of an affordable transportation solution with a low carbon

footprint.

In May 2009, Tata Motors introduced ushered in a new era in the Indian automobile industry,

in keeping with its pioneering tradition, by unveiling its new range of world standard trucks

called Prima. In their power, speed, carrying capacity, operating economy and trims, they will

introduce new benchmarks in India and match the best in the world in performance at a lower

life-cycle cost.

Tata Motors is equally focused on environment-friendly technologies in emissions and

alternative fuels. . It has developed electric and hybrid vehicles both for personal and public

transportation. It has also been implementing several environment-friendly technologies in

manufacturing processes, significantly enhancing resource conservation

Through its subsidiaries, the company is engaged in engineering and automotive solutions,

construction equipment manufacturing, automotive vehicle components manufacturing and

supply chain activities, machine tools and factory automation solutions, high-precision

tooling and plastic and electronic components for automotive and computer applications, and

automotive retailing and service operations.

Tata Motors is committed to improving the quality of life of communities by working on four

thrust areas – employability, education, health and environment. The activities touch the lives

of more than a million citizens. The company's support on education and employability is

focused on youth and women. They range from schools to technical education institutes to

actual facilitation of income generation. In health, our intervention is in both preventive and

curative health care. The goal of environment protection is achieved through tree plantation,

conserving water and creating new water bodies and, last but not the least, by introducing

appropriate technologies in our vehicles and operations for constantly enhancing environment

care.

Page 7: Report on TATA NANO

5

With the foundation of its rich heritage, Tata Motors today is etching a refulgent future.

2.1 TATA GROUP AND ITS SUBSIDIARIES

TATA group‘s portfolio includes wide range of businesses which are leading in their

fields. Its total revenue in 2006-07 is $ 28.8 billion which is 3.2 % of India‘s GDP. TATA‘s

business empire extends to over 80 countries across 6 continents. Similar to Jack Welch‘s

opinion that the business should either be first or second else it is better to sell the business,

TATA groups companies excel it the fields wherever they started the business. TATA group

has ninety eight companies that are basically operating in seven sectors.

3. ORGANIZATIONAL INNOVATIONS SYSTEM

Innovation in Tata Motors is not a recent phenomenon, but is a part of its legacy. The

Company‘s culture of perpetual search for excellence is highly attributed to the Tata‘s ethos

and incessant efforts of its employees in the past several decades to serve the customers by

bringing continuous innovation in its products and processes.

The three major areas to illustrate how Tata Motors has effected innovation in the past few

years.

1. Products

2. Processes

3. People

3.1. PRODUCTS:

Tata Motors created several breakthrough products in the past which changed the

market dynamics and helped in providing a new customer experience.

407 platform in 1980s

Japanese LCV players had made inroads into the Indian automobile market in the 1980s.

Tata Motors came out with its innovative 407 platform which was designed to suit the Indian

conditions. It quickly became the bestseller in LCVs and the platform still continues control

2/3rd of the market even in the third decade of its existence.

Indica in the late 90s-

This was the first indigenously designed passenger car in India and it was innovative in

Page 8: Report on TATA NANO

6

the sense that it provided more value for money in terms of internal space (comparable to the

Ambassador which was the benchmark in the country for internal space), contemporary

features (comparable to Maruti Zen) and all that at a very competitive price.

ACE

Ace was India‘s first mini-truck launched in 2005. While heavy trucks ply on the

Highways, research showed the need for a small sub one-ton truck for intercity and truck

terminal-to-nearby locations connectivity. The vehicle offered 4 wheeler functionality at 3

Wheelers price. The unconventional design features used in the vehicle were:

Innovative 2 cylinder Indica engine

Semi-monocoque body to withstand abuse

Rigid front axle and rear wheel drive for low cost

Flat face vs. semi-forward face to enhance the loading space.

NANO

The target price itself became the source of innovation, as you all must have read that

the big names in the industry just rubbished it as false claims and commented that it was

impossible to make a ―CAR‖ at that price. However, you all know that the promise was kept.

This was made possible through series of innovative ideas which led to acquisition of 37

patents by Tata Motors.

Engine was packaged on the rear side.

2 cylinder engine (conventionally there are 3-4 cylinder engines)

Identical handles and mechanisms for left and right side doors

Instrument cluster in the middle of the dashboard

Unconventional seats

Interior space was maximized by pushing wheels to the corners and power

train below the rear seat.

Product created was very contemporary and

It has sufficient Space inside to accommodate 4 persons

comfortably.

Highly fuel efficient

Exceeds the current Safety requirements

Complies with the current emission requirements.

Page 9: Report on TATA NANO

7

WORLD TRUCK

The new generation range of trucks which would match with the best in the world in

performance at a lower life-cycle cost is being unveiled in just a few hours from now. It will

create a new benchmark in India in terms of power, speed, carrying capacity, operating

economy and trims and a new experience for the drivers in terms of drivability and comfort.

3.2. PROCESS:

Sustainability of innovation in products needed to be complemented with innovative

changes in the organizational processes too. Some examples are:

1. Adoption of the Tata Business Excellence Model (TBEM)

It is based on Malcolm Baldridge Award for business excellence and Balance Score

Card. This has created a culture of exploring various innovative ways to achieve excellence

in all the organizational processes.

2. Use of IT systems:

It has been a benchmark and highly leveraged in the organization throughout the

VALUE CHAIN.

3. Supply Side

Free-Markets for e-Sourcing, Supplier Relationship Management (SRM).

4. Product Development Process.

Institutionalized Stage Gate process in the organization is a benchmark in itself and

ensures development of right product for the market and also an effective and efficient

program management. Transition from in-house product development to a collaborative

product development, utilizing the capabilities of suppliers, design houses, subsidiaries and

associate companies specializing in different verticals. Internalization philosophy of Tata

Motors made some major global acquisitions like TDCV, JLR, Hispano, etc. Unlike many

other Japanese / US players, they followed an innovative approach to be seen as a local

company in the country of operation, i.e, as a South Korean player in South Korea and as a

Spanish Player in Spain. This has helped them to appreciate the need and importance of all

the stakeholders and they achieved this in four stages. This involves – ―Initiating‖, by

understanding the language and basic facts of the country, ―Familiarization‖ with their

culture, ―Harmonization‖ and finally ―Synergizing‖ by sharing the best practices and work

ethics.

Page 10: Report on TATA NANO

8

3.3. PEOPLE:

The changing business environment and increasing complexity of business posed a

huge challenge in achievement of business plans. Tata Group, of which Tata Motors is a part

of, is well known for identifying and nurturing leaders. Tata Motors in the past has adopted

several innovative means to leverage its human resource capabilities for achieving extremely

challenging goals.

• Identifying leaders through assessment centers –

This process has been effectively utilized by Tata Motors to identify young

managers with very high potential. This process was started some 20 years back and

has progressively created a pool of very strong and effective leaders who have proven

their capabilities in some very challenging assignments given to them. This process

has now been replicated by many other organizations too.

• Putting them into challenging assignments and giving them International

exposure Key projects like ACE and NANO are examples of some challenging

projects which constituted of young leaders and engineers.

• Breaking the functional silos by shifting from a hierarchical organization to a

more CFT approach

All these experiences have helped us to redefine the way we have looked at

innovation. And while innovation is normally understood as introduction of new and

radical ideas in the area of products and services, our experience says there are several

other areas that also require innovation in tandem, so as to effect an innovation in a

company. Three of them I have already mentioned, that is, product, process and

people.

Four other areas of innovation

Source of inspiration/ Purpose from which the concept emanated, which stresses upon

the fact that agility and understanding the unstated/ unfulfilled need of customers is the most

important source of innovation. Tata Nano: In this case the idea struck in the mind of our

Chairman when he saw a family of four (a man, his wife and two kids) riding on a scooter on

a rainy day. He felt that there was an unfulfilled need of safe, affordable and an all weather

alternative.

Page 11: Report on TATA NANO

9

Price: The price of Nano got fixed at Rs 1 lakh (2500USD). The achievement of price target

was definite to create a major disruption in the car market as it fell midway between the price

of a scooter and the cheapest car available which was priced at Rs 2(5000USD) lakh. Product

design was choked for options because of the price target. Hence the setting the price as

target triggered a series of innovation which involved:

Target Cost approach – which involved breaking down the cost targets to sub-system and

then to component level.

Suppliers were challenged with the stringent cost target given to them, but they accepted the

same and the result is in front of you.

Promotion: Innovation lies in reaching the right customers always and communicating in a

simple and effective manner. Tata Motors in case of Nano developed a portal, which got as

high 30 million hits even before the launch of the car. After the launch there were another 30

million hits in less than a month. This helped the customers in becoming more aware of the

product features. They received around 2 lakh(.2 million) applications, which is a good

response by all standards.

Place/Reach:

Conscious of the fact that demand for such cars would be substantial from the remotest

corner of the country, the sale of form for booking were facilitated through several banks.

New insurance schemes were co-designed with the insurance companies, and now we are in

the process of enhancing the sales and service network for better reach and service to the

customers.

To summarize the experience, path breaking ideas, conceived and implemented in one

or more of the 7 Ps, leads to INNOVATION.

Purpose

Product

Price

Place

Promotion

People

Process

Page 12: Report on TATA NANO

10

4. INTRODUCTION TO THE NEW PRODUCT DEVELOPMENT:

Before the introduction of a product into the market, it goes through several stages of

development. The stages of the product development includes the following

Idea Generation

Idea Screening

Concept Testing and Development

Market Strategy

Business Analysis

Total Sales Estimation

Estimation Costs and Profits

Product Development

Test Marketing

As far as Nano is concerned, it falls new to the world products in the context that it has made

a history for the cheapest car ever made without compromising on quality. i.e. best way value

analysis.

Category Players 2002 2003 2004 2005 2006 2007

A Maruti 800 28 24 21 14 10 7

B Alto,WagnorR,Santro,Indica

33 41 47 57 64 75

C Esteem, Swift, Indigo, Ikon, Ascent

12 15 18 22 26 33

D Mercedes-C, Skoda Superb

1 2 3 4

P/L Mercedes-E, BMw 1 1 1 1 1 1

74 81 88 96 104 120

Average Monthly Category Sales

4.1. IDEA GENERATION

The main idea behind TATA NANO was perceived by the chairman of TATA group

himself who saw a family of four going on a scooter in rain he wanted to develop a transport

which was affordable, safe and could face all types of weathers. This turned out to be the

most ambitious project of Tata motors till date when Mr Ratan Tata told this to one of his

managing directors Mr. Ravi Kant he was also interested about the idea. Mr. Ravi Kant had

learned from his experience that ―People want to move from two-wheelers to four-wheelers

but they cannot afford it‖. More and more can, but Indian car buyers today represent a

Page 13: Report on TATA NANO

11

tiny slice of a potentially giant market India has just seven cars per 1,000 people. India's auto

industry has grown an average of 12% for the past decade, but just 1.3 million passenger

vehicles were sold in India in the fiscal year ending March 2006. That means a billion Indians

buy about the same number of cars in a year as 300 million Americans buy in a month. If four

wheels cost as little as two wheels, that could change fast. About 7 million scooters and

motorcycles were sold in India last year, typically for prices between 30,000 rupees and

70,000 rupees, about $675 to $1,600. Tata is targeting a price of 100,000 rupees one lakh, in

Indian 19 terms of measurement or about $2,500 at current exchange rates, for its small car.

That sounds impossibly cheap in the West but remains three times higher than India's annual

per capita income. The average pay for factory workers at Tata Motors is just $5,500 a year.

4.2. IDEA SCREENING

The next step was screening of ideas. There were many ideas like to make a scooter

with two extra wheels at the back for better stability, A three wheeled car like a closed auto-

rickshaw but the market requirement was a car, the car should be such that it doesn‘t convey

a message that it‘s just an extension of a scooter it should be a proper car and likewise should

also give the feel of a actual car. Trying to build a car cheap enough for motorcycle buyers

seems to make sense now but seemed unachievable several years ago when Mr. Ratan Tata,

chairman of Tata Motors had first mentioned his dream of building a one-lakh car in

2003 at that time the whole world thought that this gamble will never work out but ironically

the whole world is now talking of small cars as $5,000 or $7,000 after TATA NANO was

launched in 2009.

4.3. CONCEPT TESTING AND DEVELOPMENT

After surveying customers the end result was that people wanted a four wheeler which

was cheap, dependable and strong enough to carry a load of 1 ton additionally four wheelers

also increased the social status of the person who owns it .Four wheels not only practical

appeal but also had a emotional appeal. Thus the new product was now to be developed but

the following considerations would have to kept in mind when developing it-

The car should be built on a different platform than conventional ones.

It must be meeting all the safety and regulatory requirements.

Page 14: Report on TATA NANO

12

It has to be built on a scale which shall be more than double the earlier launches of

similar products and the ramp up must be smooth.

The car has to be designed so that it can be exported to other countries as the domestic

demand may not materialize as per projections.

There were three main requirement of the new vehicle: it should be low cost, adhere to the

regulatory requirements, and achieve performance targets such as fuel efficiency and

acceleration capacity. Nearly 500 engineers were involved in the development of the vehicle

and everyday they had meeting so that the decision taking and the problem solving process

could be accelerated. Each engineer represented a different part of the car: engine and

transmission, body, vehicle integration, safety and regulation, and industrial design. The body

of the vehicle had to go under a number of iterations because the Mr.Ratan Tata wanted that a

person whose height is over six feet can also fit into the car without any discomfort and

finally the length of the car had to be increased by 100mm but eventually. The hard work of

designing the car paid off and the designers were successful in their attempt to design an

actual car which did not look shabby and inexpensive but looked sleek and sophisticated.

4.4. BUSINESS ANALYSIS:

COST:

Since the car had to be built within a cost of Rs. 1 Lac, no conventional design would

work as the costs shall be higher and so the entire car has to be redesigned.

The design has to question the need of each and every component from the point of view of

its necessity of existence and also the minimum requirements of its functionality. Value

Engineering concepts have to be deployed to finalize the minimum requirements.

DISRUPTIVE TECHNOLOGY:

It‘s a technology which brings radical change by introducing new ways of doing

things.

Technology that is

Significantly cheaper than existing Technology.

Much higher performing?

Has greater functionality and

Is more convenient to Use.

Brings to market a totally different Value proposition than the one available

and can change the Paradigm about a product.

Page 15: Report on TATA NANO

13

The Guiding factor was that the cost has to be minimized for each component yet maintaining

its basic functionality. The Alternatives are:

Reduce Consumption of Material being used.

Alternate Suppliers to get same material at fewer prices.

Use alternate materials.

Eliminate use of Material.

Eliminate a process Or a Combination of the above.

COST REDUCTION PARADIGM:

Value Engineering Alternatives:

The target was very clearly defined that, within the given cost structure all the

components have to be allocated and the same had to be achieved using the available

alternatives.

The Guiding factor was that the tax structure on materials and manufacturing must support

the final cost. Decisions were

Establish factory in a tax free zone.

Get the tax advantages on infrastructure development.

Get the suppliers to establish base near the factory.

Get special concessions from State Govt.

In short select a manufacturing location where all the advantages could be achieved.

4.5. TOTAL SALES ESTIMATION:

The total sales had been estimated based on the following decisions

It was estimated that the demand for the people‘s car shall be at least twice the

demand for Maruti 800, the lowest end car.

Initial projections were at about 500,000 cars per year.

The basic reason was the conviction that the target price shall redefine the 4 - wheeler

segment.

The price decision of Rs 1 lakh is definitely going to make a lot many people transit

to

4-wheeler fold and that shall explode the demand.

Only 10% customers of 9 Million two wheeler market transit to 4-wheelers it

shall amount to 50% of the passenger car market share.

Page 16: Report on TATA NANO

14

It was decided to set up plants with 5 lakhs cars per annum capacity and ramp the

same up in stages, in line with increase in market demand.

4.6. MARKETING:

Product:

Tata has a very wide range of products it has passenger cars, utility vehicles, Trucks,

Commercial passenger Carriers and Defense Vehicles.

Nano received media attention due to its targeted low price.

The Tata Nano is a rear-engine, four passenger ,city car built by Tata Motors,

It was first presented at the 9th annual Auto Expo on 10 January 2008, at Pragati

Maidan in New Delhi, India.

Aimed primarily at the Indian market.

Price:

The prices of Tata motors are generally affordable acceptable by the general public at

large. Tata always have something for the lower class people with Nano being their trump

card. Giving discount every month and special promotion for certain type of vehicle also one

of the strong strategy use by Tata Motors. Discount can be made from Company‘s profit or

from dealer‘s profit at certain range.

Pricing strategies:

Penetration pricing

Low pricing policy with minimum profit margin.

Though the one lakh price tag is not fixed by TATA group, it was the word of mouth

of people which fixed that range. This expectation of people creates a big challenge

for the company.

Place:

Tata Motors has an extensive dealer network covering Indian and International

markets. Wherever you are, there is a Tata Motors Sales and Service dealership close to you.

The channel of distribution, physical location, and dealership method of distribution and sales

is generally adopted. The distribution of vehicle must be in a very systematic way,

Page 17: Report on TATA NANO

15

from the plant to dealership and to end user. This is not only in India itself but also to the

world-wide dealership.

Promotion:

Tata motors promote their products via Advertising and after sales services.

• Enough use of one of the most important element of promotion mix, publicity reduces

the necessity of other promotional devices for Nano.

• Publicity as ―One lakh car‖ by mouth to mouth.

• Auto expo 2008,New Delhi & Geneva

• Publicity through print & electronic media

For other type of promotional activities, cost factor that is 1 lakh price tag is to be keep in

mind, nano watches, nano T-shirts available in retail clothing stores. Advertising: - TV &

other mass media will be less effective, thus too much money will not be invested in this

regard. Mainly word of mouth advertising will get more emphasis. Internet will be a major

media for advertising.

People:

Tata Motors owe their success to the highly motivated and talented staff. There

recruitment division picks the crème-de-la-crème from premier universities, management and

engineering institutes in India. They put them through rigorous training programmes to hone

their entrepreneurial skills and impart comprehensive product knowledge.

Processes:

Tata motors follow Balanced Scorecard Collaborative, Inc for achieving excellence in

overall Company performance.

Physical Evidence:

The management of the company has managed to keep their hopes alive even in this

recession and hoped that the worse is behind Tata Motors recently launched the most awaited

car of the year, Tata Nano and the company had already received 203,000 booking that are

fully paid and 70 percent of the applicants are ready to wait till the end of 2010 for the car to

be manufactured.

Page 18: Report on TATA NANO

16

5. INNOVATIONS INCORPORATED IN TATA NANO:

At this moment, a fair amount of information on how the Nano was brought to its

intended price tag without compromising its design brief - 'a proper car'. The report attempts

to study the tactics and policies adopted by Tata‘s under the enlightened approach to

innovation.

Strategic Innovation

Focused Innovation

Holistic Innovation

5.1 Strategic Innovation:

Some of the innovations that Tata Motors followed during the process of coming out with

Nano were not only concerned with the only the car as the product, but extended itself to the

whole organizational thought process. Starting from the team formation to product delivery,

everything was thought keeping in mind the promise of bringing out a quality car within a

price tag of Rs. 1 lakh that would fulfill the latent demand of the Indian middle class who

could not afford even the lowest priced car at that time.

The whole idea was radical and required fresh thinking and challenging of age old

principles of product designing and manufacturing technologies. Inline with this, the

engineering team in charge with the designing and production of Nano was very

young with the average age being only 28.

Tata Motors were not shy to unlearn and re-learn the processes and they were open to

take in ideas from their strategic partners also. During development, the company

reinvented and minimized the manufacturing process, brought in innovative product

design, and asked component manufacturers to look at current work and design

approaches in a different perspective to produce logical and simple solutions.

The strategy behind the project was the awareness of the number of Indian families

who had two wheeled transport, but couldn't afford a four wheel car, and was based

on the company's success in producing the low cost 4 wheeled Ace truck in May

2005. The company management learnt and improved on the design procedure of Ace

truck and used this know-how to come up with the best design for Tata Nano. Also,

since both the vehicles were similar in their basic design and component requirement,

the supplier base was also easier to be put in place.

Page 19: Report on TATA NANO

17

Even after successfully launching the petrol and diesel variants of Nano, Tata Motors

have not rested on the laurels. They have taken one step further in coming out with an

electric version which enables them to position it as an environment friendly car of

the future. This shows the foresightedness of the management to sense future demand

and also the company culture to continuously innovate and improve.

Tata Motors set their retail price target before they designed the car. Doing so let them

establish their demographic. Setting the price and working backwards also required a

fundamental shift in the way the car was designed, since many costs are fixed once

the design is set.

Workers at the Tata Motors factory have been trained in Japanese manufacturing

techniques that call for continuous improvement.

5.2 Holistic Innovation:

Tata Motors worked in collaboration with their suppliers very early in the process - so

early in fact that they were able to provide functional goals for many parts rather than

technical specs (i.e. wipe water from windshield vs. windshield wiper must be x mm

by y cm and work at z cadence). This approach tapped the ingenuity of the supply

chain, who delivered parts that met the functional requirements and extremely low

prices.

Another cost cutting strategy – ‗Tata Motors‘ distributed assembly model, where they

ship the parts to local manufacturers for final assembly. The next strategic thinking

Tata Motors have to undertake to check if the policy can be applied to all the other car

models to allow them to be customized as per the local customer needs.

Working closely with the sourcing team led to many interesting inputs on what was

possible and what was not. The driving instrument cluster is uniquely placed in the

centre, giving the car an open look and enabling everyone in the car to look at it. It

also makes the dashboard equally amenable to left hand and right hand driving.

The top management, even Mr. Ratan Tata was actively involved in the designing

phase of the car. Inputs from all the teams were taken to come up with the best design.

Manufacturing planning: The interesting challenge here was that aiming for a very

low cost car meant the entire organisation had to be leaned down – not just

manufacturing, but materials, design, human resources, and so on. The team has taken

Page 20: Report on TATA NANO

18

the benefit of best practices from other industries such as cycle manufacturing or PC

manufacturing that involves mass manufacture and assembly.

Quality systems have been thought about, put in place and well documented well in

advance; so implementation becomes easier. The maintenance practices - failure

mode analysis and development – had all been completed. This ensured all this during

the planning phase itself and this reduced the breakdowns when the project started

and cut down unexpected challenges once the actual implementation started.

Suppliers located within 50 kms of the main manufacturing plant which reduces

transportation cost and fosters just in time procurement strategy.

5.3 Focused Innovation:

The Nano has 21% more interior space and 8% smaller exterior, when compared with

its closest rival, the Maruti 800. The car will come in different versions, including one

standard and two deluxe variants. The deluxe version will have air conditioning, but

no power steering.

The use of a rear mounted engine to help maximize interior space.

The Nano complies with Bharat Stage-III and Euro-IV emission standards.

Fuel economy : 20 kilometres per litre

The car conforms to environmental protection, and will have the lowest emissions in

India. Thus it douses the fear in the mind of the environmentalists about it being the

reason of shooting up emission limits for mass adoption as well as the perceived

notion of cheap products being of bad quality. The Nano will also replace many

overloaded and worn-out two-stroke polluting vehicles, both two and three-wheeled.

With a length of 3.1 metres, width of 1.5 metres and height of 1.6 metres, with

adequate ground clearance, it can effortlessly manoeuvre on busy roads in cities as

well as in rural areas.

Its mono-volume design, with wheels at the corners and the power train at the rear,

enables it to uniquely combine both space and manoeuvrability, which will set a new

benchmark among small cars.

The lean design strategy has helped minimise weight, which helps maximise

performance per unit of energy consumed and delivers high fuel efficiency.

With an all sheet-metal body, it has a strong passenger compartment, with safety

Page 21: Report on TATA NANO

19

features such as crumple zones, intrusion-resistant doors, seat belts, strong seats and

anchorages, and the rear tailgate glass bonded to the body.

Tubeless tyres further enhance safety.

The high fuel efficiency also ensures that the car has low carbon dioxide emissions,

thereby providing the twin benefits of an affordable transportation solution with a low

carbon footprint.

The mono-volume design establishes a sea of change from the two-box layout of the

800. What it ensures the Nano with is extremely short overhangs and tight packaging.

For a car of this size and image, the Nano is an extremely sexy looking car with

futuristic design cues. The bonnet line is steep and unites together with the bumper in

a seamless way.

How could Tata Motors make a car so inexpensively?

No Radio, Power windows, air conditioning, anti lock brakes, air bags, remote locks

or power steering.

Rear wheel drive: manually actuated 4-speed trans axle that gives the car better fuel

efficiency

Wheel Bearing: Wheel bearing is strong enough to drive the car at 72kmph but would

quickly wear out at higher speeds.

Analogue speedometer, odometer and fuel gauge.

Single windscreen wiper

Fundamentally, the engineers worked to do more with less. The car is smaller in

overall dimensions than the Maruti, but it offers about 20 per cent more seating

capacity as a result of design choices such as putting the wheels at the extreme edges

of the car.

Page 22: Report on TATA NANO

20

Car Maker Introduction HP Price(USD)

Model T Ford 1908 20 19700

Beetle VW 1956 24 11333

Mini Cooper 1961 34 11777

Nano Tata 2008 33 2500

Nano-Lowest ever

Modular Design Revolution:

One of the most significant dimensions of innovation is its modular design. The Nano

is constructed of components that can be built and shipped separately to be assembled

in a variety of locations. In effect, the Nano is being sold in kits that are distributed,

assembled, and serviced by local entrepreneurs. The company could produce the mass

items and ship it to them as kits.

Open Distribution Innovation:

Tata have called this 'open distribution' innovation because it mobilizes large numbers

of third parties to reach remote rural consumers, tailor the products and services to

more effectively serve their needs, and add value to the core product or service

Page 23: Report on TATA NANO

21

through ancillary services. Three innovations in products and processes come together

to support ‗Open distribution':

1. Increased modularity (both in products and processes)

2. Aggressive leveraging of existing third-party, often non-commercial, institutions in

rural areas to more effectively reach target customers

3. Creative use of information technology, carefully integrated with social institutions, to

encourage use and deliver even greater value

4. Modular designs combined with creative leverage of local third-party institutions help

participants to get better faster.

Welcoming users back into the design loop:

The Tata Motors/Nano approach contrasts with the strategy of most other

manufacturers. For more established automakers each new model represents an

advance in tight integration, with more and more of the functionality deeply

embedded in electronics that truly represent a 'black box' to the customer. The days of

customising cars to personalise them and push their performance limits are rapidly

receding into distant memory for the average customer.

Vendor Management Policy:

Tata Nano got some car parts from vendors who did their own research and

development for them to reduce cost. Some vendors developed products with Tata

Motors, and quite a few were given designs by Tata Motors. The company even

helped some vendors find international partners to make products that met the

company's requirements. Some vendors who supplied parts to Tata Nano did

competitive buying of material from countries like China and Thailand. This is very

similar to leveraging an onsite offshore model in IT.

6. CHALLENGES FACED DURING THE DEVELOPMENT OF TATA NANO:

After much speculation, Tata Motors announced on May 19, 2006 that it will be

manufacturing Tata Nano from Singur, Bengal. However, within a week protests were started

by a few farmers in the area against the acquisition of their lands by Tata. The cause was

taken up by Mamata Banerjee, the leader of Congress. The situation escalated with Tata‘s

threatening to pull out and disruption of compensation for farmers who had volunteered to

sell their land by anti-acquisition activists. This was followed by a state-

Page 24: Report on TATA NANO

22

wide strike by Trinamool Congress in October. The government banned political parties from

holding meetings or processions at Singur and installed a huge police force there. There was

widespread violence in the clashes between the police and the farmers on December 2, 2006.

The Key concerns are

Safety

Emissions

Congestions

1. Question of Safety

The Nano has an all sheet-metal body made from Japanese and Korean steel, with

safety features such as crumple zones, intrusion-resistant doors, seat-belts, strong seats and

anchorages, and the rear tailgate glass bonded to the body. Tires are tubeless

2. Mass Motorization

As the Nano was conceived and designed around introducing the automobile to a

sector of the population who are currently using eco-friendly bicycles and motorcycles,

environmentalists are concerned that its extraordinarily low price might lead to mass

motorization in countries like India and therefore possibly aggravate pollution as well as

increase the demand for oil. The ecology focused German newspaper die tageszeitung feels

that such concerns are "inappropriate" as the Tata Nano has lower emissions compared to the

average Volkswagen, and that developing countries shouldn't be denied the right to motorized

mobility when industrialized countries should be looking to reduce their emissions and usage

of cars. Die Weltre ports that the car conforms to environmental protection, and will have the

lowest emissions in India.

In crowded metropolitan cities like Mumbai, Ratan Tata has conceived a scheme to only offer

the Nano to those individuals who do not have an automobile already. The Nano will also

replace many overloaded and worn-out two-stroke polluting vehicles, both two and three-

wheeled. According to Anumita Roychowdhury, associate director of the Centre for Science

and Environment in New Delhi, "the low-cost cars will be disastrous" in the current policy

and regulatory framework.

Page 25: Report on TATA NANO

23

3. Used car market effects:

The Nano is alleged to have severely affected the used car market in India, as many

Indians opt to wait for the Nano's release rather than buying used cars, such as the Maruti

800 (a rebadged Suzuki Alto), which is considered as the Nano's nearest competitor. Sales of

new Maruti 800s have dropped by 20%, and used ones by 30% following the unveiling of the

Nano. As one automotive journalist summarizes; ―People are asking themselves—and us—

why they should pay, say, 250,000 Rupees for a Maruti Alto, when they can wait and get a

brand new Nano for less in a few months‘ time, a car that is actually bigger‖.

4. Cases of Fire

There have been 7 cases where the Nano caught fire, with the first three attributed to

an electrical fault in the steering column. Tata Motors has since replaced the OEM supplying

the fire retardant material as well as the steering column assembly. In March 2010, a new

case of a Tata Nano catching fire was reported, in which the car was being delivered from the

dealership to the owner's house. This case is currently under investigation.

5. Competitors

Rival car makers including Bajaj Auto, Fiat, General Motors, Ford

Motor, Hyundai and Toyota Motor have all expressed interest in building small cars in India

that are affordable to more middle-class consumers in emerging markets. The bulk of demand

there is for small cars because people are much more sensitive to fuel prices. Honda and

Toyota are leading the way on so called cleaner gasoline-electric hybrids, and some

environmentalists argue getting prices down on these technologies is where efforts should be

concentrated. Inexpensive and eco-friendly electric-cars like Tara Tiny (which has an engine

producing 4 hp compared to Nano's 33 hp), Oreva Super (both reportedly even cheaper than

Tata Nano) and REVA pose even more significant danger to Nano. There are also rumors

of Maruti Suzuki introducing a lower priced version of Alto to counter Tata Nano.

Page 26: Report on TATA NANO

24

Maruti 800 Tata Nano bike

Engine 796 cc 623 cc 100 cc

Price(OTR) Rs 225,000 Rs 120,000(88%) 45,000

DP Rs 10,000 Rs 10,000 Rs 5000

EMI(60m) Rs 3583 Rs 1833(95%) Rs 667

Kmpl 15 20 50

Nano vs Maruti 800 Vs Bike- Ownership Cost

7. FUTURE OF TATA NANO:

Emerging markets are a fertile ground for innovation. The challenge of reaching

dispersed, low income consumers in emerging markets often spurs significant

innovation.

As customers gain more power, they will demand more tailoring and value added

services to meet their need. Companies which innovate on this dimension are likely to

be richly rewarded.

World is getting tougher day by day being unique is a competitive advantage.

Expectations to Tata Nano have proved this.

After 100 years to Henry Ford, Tata has not only proved him again not only he came

out of the expectations but also came out with a platform for Indian auto sector.

Page 27: Report on TATA NANO

25

CONCLUSION:

In the conclusion we can say that Nano has truly lived up to its expectations and shattered the

following myths

Cheap means unsafe- physically validated crash test results on 1 vehicle and plans

more tests in the future

Rear- engine cars are unsafe- Ferrari, Porsche, VW and Lamborghini do it why can‘t

Tata?

The Nano will pollute the planet- 623cc engine produces less CO2 than average Eu

small car.

The Nano will have no storage space-Sufficient storage space, under the bonnet and

over the rear parcel tray, rear seats fold to dramatically increase storage space.