REPORT Of

ELECTRICAL

ENGINEERING FOR

THE PERIOD APRIL-JULY, 2020

LONG TERM PROGRAMMES

ME Electrical Engineering (Instrumentation & Control)

Regular Batch 2019 Second semester

Lectures / Course materials/ e-content/ e book/ assignment /

question hour session/ Query session have been provided to

students through Google Classroom and ZOOM/Google Meet

during April – June 2020, for the following subjects by the

respective faculty members.

(i) Soft Computing Techniques – Dr. Lini Mathew

(ii) Power System Analysis – Dr. Piush Verma

(iii) Optoelectronic Instrumentation – Dr. Poonam Syal

(iv) Microcontroller based Embedded Systems – Dr. Ritula Thakur

(v) Advanced Control Theory – Dr. Lini Mathew

ME Electrical Engineering (Instrumentation & Control)

Modular Batches of 2018 and 2019

Lectures / Course materials/ e-content/ e book/ Assignments/

Question hour session/ Query session have been

provided to students through Webex during June- August

2020 for the following subjects by the respective faculty

members.

(i) Soft Computing Techniques – Dr. Lini Mathew

(ii) Virtual Instrumentation – Dr. Lini Mathew

Scholars in Ph.D Programme

Dr. Lini Mathew

1) Mr. Amandeep Sharma Submitted in June 2020

2) Ms Anjali A Bhatnagar Report writing in progress

3) Mr. Kuldeep Singh

4) Ms. Preeti Kumari

5) Ms. Mohini Gunjal

Dr. Piush Verma

1) Mr. Raj Kumar Saini Submitted in July 2020

2) Ms. Loveleen Kaur

Dr. Poonam Syal

1) Mr. Shivaji Thube

Dr. Ritula Thakur

1) Mr. Shivaji Karad

SHORT TERM PROGRAMMES

• In Contact Mode NIL

• In ICT Mode 11

S.

No

Title of STC Dates No. of

participa

nts

Course

Coordinator

1. 8051 Microcontroller and

its Applications

27.04.2020 to

01.05.2020

176 Dr. Ritula

Thakur.

2. Teaching and Learning for

Accreditation in Technical

Education

27.04.2020 to

01.05.2020

390 Dr. Piush

Verma

3. MATLAB Programming 11.05.2020 to

15.05.2020

172 Dr. Lini

Mathew

4. 8051 and its Applications 18.05.2020 to

22.05.2020

163 Dr. Ritula

Thakur

S.

No

Title of STC Dates No. of

participa

nts

Course

Coordinator

5. Leadership and Team-

Work for Performance

Excellence Education

18.05.2020 to

22.05.2020

253 Dr. Piush

Verma

6. Programming using

MATLAB

08.06.2020 to

12.06.2020

211 Dr. Lini

Mathew

7. Real World Applications of

Microcontrollers

15.06.2020 to

19.06.2020

160 Dr. Ritula

Thakur

8. Artificial Neural Networks

and Fuzzy Logic

22.06.2020 to

26.06.2020,

216 Dr. Lini

Mathew

9. Advances in Electrical &

Electronics Engineering

18.07.2020 to

22.07.2020

83 Dr. Piush

Verma

S.

No

Title of STC Dates No. of

particip

ants

Course

Coordinator

10

.

Nanosciences for

Engineering

Applications

22.06.2020 to

26.06.2020 jointly

with Dr. B R

Ambedkar NIT

Jalandhar

145 Dr. Piush

Verma

11. Artificial Intelligence

and its Applications -

27.07.2020 to

31.07.2020 jointly

with Dr.B R

Ambedkar NIT

Jalandhar

198 Dr. Piush

Verma

Man Power trained in STCs = 2167

{ManPower of a STC=No of participants * Duration of STC in week}

INSTRUCTIONAL RESOURCES DEVELOPED

Preparation of course contents for the following Higher

Modules

(i) HM-01 Institutional Governance and Development

(ii) HM-03 Institutional Collaboration for Research &

Innovation Dr.Piush Verma

Prepared three video films titled (i) How to attend Webex

training session (ii) How to conduct Webex training session

and (iii) How to schedule Webex training session -

Dr.Ritula Thakur

RESEARCH AND DEVELOPMENT

Research Project Submitted

1. Project Proposal submitted on “Integrated Yoga Therapy

Intervention based on ECG and EEG Perspective” to

Department of Science and Technology,

Dr. Ritula Thakur and Dr. Piush Verma.

2. Project Proposal submitted on “Framework and

Methodology for Predictive Lung Deposition Estimation

using Low Cost Sensors” to Department of Science and

Technology,

Dr. Piush Verma.

S.N

o

Title of Thesis Name of Student Name of

Supervisor

1. Hardware Implementation of

Single-Phase Five-Level,

Seven-Level and Nine-Level

Inverters with Reduced

Number of Switches

Sumit Kumar Rai

Batch Regular

2017, on

11.07.2020

Dr. Lini Mathew

1. Investigation on Controlled

Techniques For LED

Lightning Systems

Shankar Lal

Sharma

Batch Modular

2015, on

12.06.2020

Dr. Ritula

Thakur

Details of the Dissertation for Masters Degree

Programme

Final Thesis Completed

Preliminary Thesis Completed

S.

No

Title of Thesis Name of Student Name of

Supervisor

1. Online Incipient Fault

Diagnosis Of Induction

Motors Using Motor

Electrical Signature

Analysis

Amandeep Sharma

Submitted in June

2020 to Punjab

University (PU),

Chandigarh

Dr. Lini Mathew

2. Design and Performance

Optimization of Three

Phase Squirrel Cage

Induction Motor for Rural

Area Applications

Raj Kumar Saini

Submitted in July

2020 to University of

Petroleum and

Energy Studies

(UPES), Dehradun.

Dr. Piush Verma

Details of Dissertation for Ph.D - Submitted

CURRICULUM DEVELOPMENT

Dr. Lini Mathew attended the workshop for Design

and Development of NSQF Compliant Diploma level

Programme in Electrical Engineering (full time/part-time)

on 10th July, 2020 for BTE, Delhi.

EXTENSION SERVICES AND CONSULTANCY

1. Dr. Lini Mathew acted as external examiner, evaluated two PhD theses and attended the Oral Examination (i) Dr. Parvesh Saini, Graphic Era University, Dehradun (ii) Dr.Varada Jayant Tambe, M.S.University, Baroda

2. Dr. Ritula Thakur took two expert lectures on “Role of Embedded Engineers in Green Engineering” in TEQIP III sponsored ICT enabled FDP on Energy Conservation and Management conducted by Electrical Engineering Department, Guru Nanak Dev Engineering College, Ludhiana from May 4-8,2020.

3. Memorandum of Understanding (MoU) signed by NITTTR Chandigarh and NIT Jalandhar in the Month of January 2020 - Dr.Piush Verma

– 3 STC conducted

– International conference on Futuristic Multidisciplinary Approach in Engineering and Technology in the month of December. 2020.

– one Summer School in September 2020

1. Proposal submitted to set up distinct skill Development and

Vocational Training Unit - A joint effort by NITTTR and Skill

Development Council of India (SDCI), Dr.Piush Verma, Dr. Lini

Mathew

2. Proposal submitted to UGC to start the following three courses

and prepared the scheme of examination and course contents

(i) M.E. Smart Grid (ii) M.E. in Energy and Environmental

Management (iii) P. G. Diploma Electrical Engineering (Electric

Vehicle) Dr.Lini Mathew, Dr. Piush Verma, Dr. Ritula Thakur

3. Proposal submitted to UGC to start PG Diploma in Mobile

Communications in association with industry partner TSSC - A

joint effort by NITTTR and Industry partner TSSC, Dr.Piush

Verma and Dr. Lini Mathew, Dr. Ritula Thakur

RESEARCH PAPER PUBLICATION: NO. OF PUBLICATIONS

SCI routine

Journals

Scopus

index

Journals

UGC/ AICTE

Approved

Journals

Any Other

Journals

Total

1 3 Nil Nil 4

No. of Papers

presented in

International

Conferences

No. of Papers

published in

International

Conferences

No. of Papers

presented in

National

Conferences

No. of Papers

published in

National

Conferences

1 Nil Nil

Details of the papers

1. Amandeep Sharma, Lini Mathew, Shantanu Chatterji, Deepam Goyal,

“Artificial Intelligence based Fault Diagnosis for Condition Monitoring of

Electric Motors” International Journal of Pattern Recognition and

Artificial Intelligence, Vol.34, No.3, 2020. Pages: 2059043-1 to

2059043-30 DOI: 10.1142/S0218001420590430. (SCI-E Indexed)

2. Md Zahid Hassnain, Ritula Thakur, “Different Techniques of Fault

Detection in Electrical Equipment”, International Journal of Advanced

Science and Technology, Vol.29, No.7, 2020. (Scopus Indexed)

3. Raj Kumar Saini, Devender Kumar Saini, Rajeev Gupta, Piush Verma,

R.P.Dwivedi, Neeraj Gandotra, Robin Thakur, Ashwani Sharma,

“Performance Improvement of Three Phase Squirrel Cage Induction

Motor Operating Under Rated Voltages- A Design Consideration for Rural

Areas” Advances in Intelligent Systems and Computing, Vol.989, page

1-11, 2020. (Scopus Indexed)

4. Anamika, Lini Mathew, “Maximum Power Point Tracking of a Hybrid

PV-Wind–Diesel System for Micro Grid”, International Journal of

Innovative Technology and Exploring Engineering (IJITEE) ISSN:

2278-3075, Volume-9, Issue-6, April 2020 (Scopus Indexed)

5. Sumit Kumar Rai, Shimi S.L, Lini Mathew, “Implementation of

Modified Five Level Inverter using Reduced Number of Switches”,

Electric Power and Renewable Energy Conference-2020

(EPREC-2020), NIT Jamshedpur, May 2020. Springer Lecture

Notes in Electrical Engineering (LNEE) (Scopus-indexed).

6. Sumit Kumar Rai, Shimi S.L, Lini Mathew, “Software and

Hardware Implementation of 9 level Inverter with Low Component

Count”, accepted for virtual presentation at IEEE Industrial

Electronics Society (IES) 46th Annual Conference IECON2020 to

be held at Marina Bay Sands Expo and Convention Centre,

Singapore during October 18-21, 2020

PATENTS

Patent filed - Indian Patent Application No. 202011003964,

Title : Multilevel Inverter was filed on January 29, 2020, in the

name of NATIONAL INSTITUTE OF TECHNICAL

TEACHERS TRAINING AND RESEARCH

[V & A Ref: 1779-P-02-IN/TIFAC Ref: T.I. (59)/TIFA/2018],

Inventors : Mr. Rohit Kumar and Dr. Shimi Sudha Letha.

1. The following faculty members attended the ‘Capacity Building

Programme – Module 3 - Communication Skills, Modes and

Knowledge Dissemination’ of AICTE-NITTTR Modules during

May 26 – 30, 2020 - Dr. Lini Mathew, Dr. Piush Verma, Dr.

Ritula Thakur

2. The following faculty members attended the ‘Capacity Building

Programme – Module 5 and 6 - Technology Enabled Learning

and Lifelong Self-Learning of AICTE-NITTTR Modules during

June 9 – 13, 2020 - Dr. Piush Verma, Dr. Ritula Thakur

3. Conducted 5 days webinar series on Aatm Nirbhar Bharat

Abhiyaan as Team Member and also Incharge of Pillar 4 on

“Ushering Vibrant Demography” - Dr. Ritula Thakur

OTHER ACTIVITIES

4. Dr. Ritula Thakur attended following online webinars conducted

by SEECE Galgotias University:

– Role of the Smart Grid in Facilitating the Integration of

Renewables on 27th July 2010

– Artificial Intelligence in Cloud Computing and IoT on 18th July

2020

– Nuances of Scientific Publishing on 18th July 2020

5. Dr. Lini Mathew associated in Review of video lectures of faculty

members of Electrical Engineering Department of Maharaja

Ranjit Singh Punjab Technical University, Bathinda.

ACTIVITIES FOR THE

PERIOD AUGUST 2020 - JANUARY, 2021

LONG TERM PROGRAMMES

• ME Electrical Engineering (Instrumentation & Control)

Regular Batch 2019 Third semester

• Regular Batch 2020 First semester

• ME Electrical Engineering (Instrumentation & Control)

Modular Batches of 2018, 2019 and 2020

• Supervision of Theses of students of different batches of

Modular and Regular

• M.Sc in Energy Systems and Management

(in collaboration with the Applied Science Department)

SHORT TERM COURSES

i. Bio-inspired Optimisation

ii. Distributed Generation and Micro-grid

iii. Image Processing

iv. Recent Advances in Electrical Engineering

v. Embedded Systems & IoT

INDUSTRY ORIENTED COURSES

i. Electrical Vehicle Technology

ii. Renewable Energy

iii. Real Time Simulation & HIL Simulations of Microgrid, Smart Grid

and Renewable Sources (in collaboration with Opal RT)

iv. Applications of HIL in Electrical Engineering (in collaboration with

Typhoon HIL)

SKILL BASED COURSES

i. Arduino based Application Projects

ii. Diagnostic Study of Transformers

iii. PLC and its Applications

INSTRUCTIONAL MATERIAL DEVELOPMENT

• NRC MOOCS COURSE

IoT Driven Embedded Systems Applications

Coordinator - Dr. Ritula Thakur

• PREPARATION OF VIDEOS

Arduino Based Experiments

Coordinators - Dr. Ritula Thakur/ Er. Ashish Mahajan

IN-HOUSE PRODUCT DEVELOPMENT

ENERGY AUDIT OF NITTTR CHANDIGARH, CAMPUS

Team - Dr. Piush Verma, Dr. Lini Mathew, Dr.Ritula Thakur

Methodology to be Adopted

• Formation of audit groups for specific areas and end use

• Visual inspection and data collection

• Observations on the general condition of the facility and

equipment & quantification

• Identification / verification of energy consumption and other

parameters by measurements

• Detailed calculations, analyses and assumptions

• Validation

• Potential energy saving opportunities

• Implementation

THANKYOU