Repeater CSFT922 a f

2
General The CSFT922 provides output power levels comparable to Base Sta- tions in GSM 900 and EDGE networks. The frequency shifting tech- nology used in the repeater allows a high gain without the stringent isolation requirements necessary when installing conventional repea- ters. The CSFT922 consists of 2 units, a Donor Unit at the BTS site red to handle up to 2 GSM/EDGE carriers. Features Output power comparable to a base station - up to 20 watts. Minimal antenna isolation requirements. Convection cooling. Can be mounted almost anywhere. Comprehensive remote control and supervision possibilities. CSFT922 Channel Selective Frequency Translating GSM 900 EDGE Repeater Values are given in millimeters Quick deployment and cost- effective coverage in rural areas, using the CSFT922.

description

Repeater CSFT922

Transcript of Repeater CSFT922 a f

Page 1: Repeater CSFT922 a f

GeneralThe CSFT922 provides output power levels comparable to Base Sta-

tions in GSM 900 and EDGE networks. The frequency shifting tech-

nology used in the repeater allows a high gain without the stringent

isolation requirements necessary when installing conventional repea-

ters. The CSFT922 consists of 2 units, a Donor Unit at the BTS site

red to handle up to 2 GSM/EDGE carriers.

Features� Output power comparable to a base station - up to 20 watts.

� Minimal antenna isolation requirements.

� Convection cooling.

• Can be mounted almost anywhere.

• Comprehensive remote control and supervision possibilities.

CSFT922Channel Selective Frequency Translating GSM 900 EDGE Repeater

Values are given in millimeters

Quick deployment and cost-effective coverage in rural areas, using the CSFT922.

Page 2: Repeater CSFT922 a f

www.avitec.se

CSFT922Channel Selective Frequency Shifting GSM 900 EDGE Repeater©

2003 A

VIT

EC A

B

AVITEC AB, Address: Box 2011, S-161 02 BROMMA, SWEDEN Phone:+46-8-475 47 00 Fax:+46-8-475 47 99 E-mail: [email protected]

Frequency range Uplink ( UL ) 890 - 915 MHz ( P-GSM900 ) Frequency range Downlink ( DL ) 935 - 960 MHz ( P-GSM900 )Operational bandwidth 25 MHz Number of channels 1 - 2Channel programming In 200 kHz Channel spacing Selectivity > 60 dB at 400 kHz

> 70 dB at 600 kHzRipple in passband < 2 dB Sensitivity < - 109 dBm at S/N 9 dB

2.5 dB typical, < 3 dB at max gainMaximum input level , no damage DL/ UL + 10 dBmPropagation delay 5,5 µs typical Output power per carrier DL ( ER ) + 43 dBm GSM/ GMSK

+ 40 dBm EDGE / 8-PSK average powerOutput power per carrier DL ( IR ) + 40 dBm GSM/ GMSK

+ 37 dBm EDGE / 8-PSK average powerOutput power per carrier UL ( ER/IR ) + 37 dBm GSM/GMSK

+ 34 dBm EDGE / 8-PSK average powerGain DL ( ER ) 78 - 108 dB , adjustable, in 1 dB steps.Gain DL ( IR ) 75 - 105 dB , adjustable, in 1 dB steps.Gain UL ( ER/IR ) 72 - 102 dB , adjustable, in 1 dB steps.Gain Flatness ( 200 kHz BW ) ± 1 dB Gain Flatness ( 15 MHz BW ) ± 1 dB Link to output Channel Frequency Error < 1 x 10-9 Modulation Accuracy ( DL ) GSM / GMSK, < 2.5 ° RMS and < 10 ° peak at +43 dBm EDGE / 8-PSK, < 4 % EVM RMS at + 40 dBm average powerModulation Accuracy ( UL )GSM / GMSK, < 2.5 ° RMS and < 10 ° peak at + 37 dBm EDGE / 8-PSK, < 3 % EVM RMS at + 34 dBm Intermodulation < - 36 dBm ( two carriers at + 43 dBm DL, 600 kHz spacing )

< -36 dBm ( two carriers at + 37 dBm UL, 600 kHz spacing ) Spurious responses < - 36 dBm for 9 kHz - 1 GHz

< - 30 dBm for 1 GHz - 13 GHzSystem impedanceReturn loss at antenna connections > 16 dBAntenna connectors DIN 7/16 Electrical ratings 230 V AC, 50 Hz ( alt. - 48 VDC )Power Consumption MECHANICALDimensions 470 x 340 x 145 mmEnclosure Aluminium ( IP 65 )Weight 16 kgENVIRONMENTALEMC See compliance below Operating Temperature - 25 to + 55 ° CStorage - 30 to + 70 ° CHumidity ETSI EN 300 019-2-4

( see compliance below )

MTBF > 50000 hrsComplies with R& TTE Directive including

ETS EN 301 502 ( ETS EN 300 609-4 / GSM 11.26 )ETS EN 301 498-8EN 60 950

IR: Internally combined carriersER: Externally combined carriers