Repair wd10 ears hdd with many bad sectors of green & red blocks by dfl-wdii hd repair tool

3

Click here to load reader

Transcript of Repair wd10 ears hdd with many bad sectors of green & red blocks by dfl-wdii hd repair tool

Page 1: Repair wd10 ears hdd with many bad sectors of green & red blocks by dfl-wdii hd repair tool

Repair WD10EARS-HDD With Many Bad Sectors Of Green & Red Blocks by DFL-WDII HD Repair Tool http://www.dolphindatalab.com/repair-wd10ears-hdd-with-many-bad-sectors-of-green-red-blocks-by-dfl-wdii-hd-repair-tool

This is another hdd repair bad sector repair case study, it’s one WD10EARS 1TB hdd. We wrote

this case study not showing how powerful our tool is, but the most important is to demo how to

diagnose one hdd in different methods and how to find out the solutions. A right way of thinking

makes you more successful. The user tried to use format with P-list to remove the bad sectors but

after the format and scanned the hdd, there’re still a lot of bad sectors, full of green and read blocks.

At this time, the user tried to test the heads’ read and write abilities to see if it’s head problem. He went

to the menu ‘FW Operations’-Head R/W Test. The user found the head 0, 1, 2, 3 were in good status

and the user used other methods to diagnose the hdd further. Next the users went to try the tracks

read and write and see if it’s normal. The user selected one track-track 25 to read and write to test

and found the head 3 has a read error. This is not a big problem; Cause’ head 3 doesn’t control the

firmware area while the head 0 and head 1 do. Next the user knows that the servo adaptive modules

can cause bad sectors too and therefore the user went to run ‘Servo Calibration’ which is used to

regenerate the Servo adaptive modules. Users can reach this function by visiting the Selftest

Optimize-Online ARCO-Servo Cal. After Servo Calibration, the user considered optimizing all read

channels so that the program can read better the hdd at a later step. This is what the ARCO 46 does.

Before running ARCO 46, the user went to clear the ARCO 46 logs. Because this hdd has 4 heads

and therefore the log modules are module 2000, 2001, 2002 and 2003. The user went to manually

clear these four log modules. Next the user went to run ARCO 46 optimization.

Page 2: Repair wd10 ears hdd with many bad sectors of green & red blocks by dfl-wdii hd repair tool

After the ARCO 46 is finished, the user softreset the hdd, went to format with p-list again and the

bad sectors were repaired and gone.

Visit: Dolphin Data Lab HDD Repair Tools Dolphin Data Lab Data Recovery Hardware Dolphin

Data Lab Head and Platter Swap Tools [email protected] For a higher success rate of hdd

repair and data recovery, cheers!

Data Recovery Tools:

HDD Repair Tools http://www.dolphindatalab.com/product-category/hdd-repair-tools/

Page 3: Repair wd10 ears hdd with many bad sectors of green & red blocks by dfl-wdii hd repair tool

Data Recovery Hardware http://www.dolphindatalab.com/product-category/data-

recovery-hardware/

DFL-STII Seagate HDD Firmware Repair

Tool http://www.dolphindatalab.com/product/seagate-hdd-firmware-repair-tool-dfl-stii/

DFL-DE Data Recovery Hardware http://www.dolphindatalab.com/product/data-

extractor-dfl-de/

DFL-DDP Data Recovery Equipment http://www.dolphindatalab.com/product/dfl-

data-dr-pro-usb-3-data-recovery-equipment/