REOVIB MFS 268 - REO-USA, Inc. · REOVIB MFS 268 Frequency controller for vibratory feeders...
2
REOVIB MFS 268 Frequency controller for vibratory feeders Description Dimension drawing º Adjustable current limiter º Sinusoidal output current • Mains voltage compensation • Suitable for 110 V and 240 V supplies • Internal setpoint using display, external with potentiometer • Enable input 24 VDC or contact • Adjustable frequency range of 5...300 Hz • Adjustable frequency range limits • Automatic optimum frequency search • Operation via LED display and keypad • Feeder start/stop keys in the touch panel • Memory storage for user settings • All settings can be made without opening the unit • Integrated track control and external with 0...+10 V, DC 0(4)...20 mA, potentiometer 10 kW Enable: 24 V, DC or contact Status relay: Change-over contacts 250 V, 1 A Track control: internal supply 24 V, DC for PNP-sensor remote -parametrisation of all functions: Amplitude control: sensor connection: e.g. for type REOVIB SW 10 Irrtümer und Änderungen vorbehalten Stand: 03.08.2012 amplitude regulation Type Input voltage: 110 V, 240 V, ±10 %, 50/60 Hz Output frequency: 5...300 Hz Output voltage: 0...95 V, 0...205 V Output current: 3 A 6 A 8 A 16 A Setpoint: internal over display The REOVIB MFS 268 series of variable-frequency regulators are specially designed for controlling vibratory feeders. These units are available with DeviceNet, PROFIBUS-DP, RS232 interface, ProfiNet or EtherNet-IP interface. The units produce a highly stable output frequency that is adjustable in 0.1 Hz increments. Manual tuning time of the mechanical feed system is significantly reduced. The sinusoidal output means that the feeder runs quielty and provides gentle product handling characteristics. Settings are adjusted by using the touch-panel and the integrated digital display. The feed rate setpoint can be adjusted in several ways, including the use of 0...10 V, DC or 0(4)...20 mA signals. For user parameter sets can be stored and recalled. There is a current limit setting that is used to protect the electromagnetic coil against overloads. The frequency range window can be used to limit the adjustment band available to the user. Track controller and amplitude feedback integrated within the unit. The electrical connection is effected over terminals in the front panel. The fixing is designed for the mounting on a plate in the cabinet. depending on design via DeviceNet, PROFIBUS-DP, RS232, ProfiNet or EtherNet-IP REOVIB MFS 268 DeviceNet, PROFIBUS-DP RS232 interface EtherNet-IP ProfiNet
Transcript of REOVIB MFS 268 - REO-USA, Inc. · REOVIB MFS 268 Frequency controller for vibratory feeders...
REOVIB MFS 268
Frequency controller for vibratory feeders
Description
Dimension drawing
º Adjustable current limiter
º Sinusoidal output current
• Mains voltage compensation• Suitable for 110 V and 240 V
supplies• Internal setpoint using display,
external with potentiometer• Enable input 24 VDC or contact• Adjustable frequency range of
5...300 Hz• Adjustable frequency range limits• Automatic optimum frequency
search• Operation via LED display and
keypad• Feeder start/stop keys in the
touch panel• Memory storage for user settings• All settings can be made without
opening the unit• Integrated track control and
external with0...+10 V, DC 0(4)...20 mA,potentiometer 10 kW
Enable: 24 V, DC or contactStatus relay: Change-over contacts 250 V, 1 ATrack control: internal supply 24 V, DC for
PNP-sensorremote-parametrisation of all functions:
Amplitude control: sensor connection:e.g. for type REOVIB SW 10
Irrtümer und Änderungen vorbehalten
Stand: 03.08.2012
amplitude regulation
Type
Input voltage: 110 V, 240 V, ±10 %, 50/60 HzOutput frequency: 5...300 HzOutput voltage: 0...95 V, 0...205 VOutput current: 3 A 6 A 8 A 16 ASetpoint: internal over display
The REOVIB MFS 268 series of variable-frequency regulators are speciallydesigned for controlling vibratory feeders. These units are available withDeviceNet, PROFIBUS-DP, RS232 interface, ProfiNet or EtherNet-IP interface. The units produce a highly stableoutput frequency that is adjustable in 0.1 Hz increments. Manual tuning time of the mechanical feed system is significantly reduced. The sinusoidal output meansthat the feeder runs quielty and provides gentle product handling characteristics.Settings are adjusted by using the touch-panel and the integrated digital display.The feed rate setpoint can be adjusted in several ways, including the use of 0...10V, DC or 0(4)...20 mA signals. For user parameter sets can be stored andrecalled. There is a current limit setting that is used to protect the electromagneticcoil against overloads. The frequency range window can be used to limit theadjustment band available to the user. Track controller and amplitude feedbackintegrated within the unit. The electrical connection is effected over terminals inthe front panel.The fixing is designed for the mounting on a plate in the cabinet.
dependingon design via DeviceNet, PROFIBUS-DP, RS232, ProfiNet or EtherNet-IP
REOVIB MFS 268DeviceNet, PROFIBUS-DP
RS232 interfaceEtherNet-IP
ProfiNet
Secretary
Typewritten text
Description ID# ___________________________ MFS 268 3A IP20 621605 MFS 268 6A IP20 621612 MFS 268 8A IP20 621624 MFS 268 16A IP20 621109
Ambient temperature: 0...+45 °CProtection: IP 20
Irrtümer und Änderungen vorbehalten
