Remote control panel for the FSN/media/Downloads/Brochures/2011...The RCP-120 is fully integrated...
2
RCP-120 Remote control panel for the FSN The Remote Control Panel (RCP-120) enables you to control of the FSN multi-format switcher AUX outputs from a remote location. The RCP-120 allows you to remotely control routing sources to the FSN AUX outputs. This means you can select sources for monitoring, perform adjustments or record without interfering with the main production workflow managed by the FSN-150 control panel. The RCP-120 is fully integrated with the FSN system. Dedicated menus allow the setup and configuration of the RCP-120 from the FSN control panel. An integrated web interface is also provided for remote setup and configuration. The RCP-120 is available in a slim 1RU package featuring 12 high-resolution color LCD displays that allow for electronic labeling. The panel provides selection of up to 20 sources. Up to thirty-two (32) RCP-120 units can be connected to the FSN system via an Ethernet switch. The buttons on the RCP-120 follow the input bus mapping and source labeling as defined on the FSN control panel. The RCP-120 operates in two modes: standard and mixer. In standard mode, AUX outputs are switched immediately after you press the source button. In mixer mode, you can assign an additional panel to Preview and transitioned to Program by pressing the AUTO TRANS button. Features • Remote control of FSN AUX outputs • Integrated with the FSN menu system • 12 high resolution graphic LCD displays • Selection of up-to 20 sources (10 unshifted and 10 shifted) • Integrated web interface • Up-to 32 RCP-120 can be connected to the FSN system • Ethernet Remote Control • Standard and AUX Mixer mode • Low Power consumption • 1 RU
Transcript of Remote control panel for the FSN/media/Downloads/Brochures/2011...The RCP-120 is fully integrated...
RCP-120Remote control panel for the FSN
The Remote Control Panel (RCP-120) enables you to control of the FSN multi-format
switcher AUX outputs from a remote location.
The RCP-120 allows you to remotely control routing sources to the FSN AUX outputs. This
means you can select sources for monitoring, perform adjustments or record without
interfering with the main production workflow managed by the FSN-150 control panel.
The RCP-120 is fully integrated with the FSN system. Dedicated menus allow the
setup and configuration of the RCP-120 from the FSN control panel. An integrated web
interface is also provided for remote setup and configuration.
The RCP-120 is available in a slim 1RU package featuring 12 high-resolution color LCD
displays that allow for electronic labeling. The panel provides selection of up to 20
sources. Up to thirty-two (32) RCP-120 units can be connected to the FSN system via an
Ethernet switch. The buttons on the RCP-120 follow the input bus mapping and source
labeling as defined on the FSN control panel.
The RCP-120 operates in two modes: standard and mixer. In standard mode, AUX
outputs are switched immediately after you press the source button. In mixer mode,
you can assign an additional panel to Preview and transitioned to Program by pressing
the AUTO TRANS button.
Features
• Remote control of FSN AUX outputs
• Integrated with the FSN menu system
• 12 high resolution graphic LCD displays
• Selection of up-to 20 sources (10 unshifted and 10 shifted)
• Integrated web interface
• Up-to 32 RCP-120 can be connected to the FSN system
• Ethernet Remote Control
• Standard and AUX Mixer mode
• Low Power consumption
• 1 RU
www.barco.com
Pres. Kennedypark 35 8500 Kortrijk, Belgium
T: +32 56 36 80 47 - F: + 32 56 36 83 86E: [email protected]
Barco
M00438-R00-0411-DS April 2011
The information and data given are typical for the equipment described. However any individual item is subject to change without any notice. The latest version of this brochure can be found on www.barco.com.
Application diagram
11101 Trade Center DriveRancho Cordova, CA 95670, USA
T: +1 916 859 2500F: +1 916 859 2515
RCP-120
Power connector 2-pin Phoenix Connector
Power consumption 12 VDC, 1.1A
Communication LAN: 10/100 Mbps, RJ-45 single port
Serial: 8,N,1 @9600 baud
Dimensions (HxWxD) 1.75 x 19.00 x 1.76in / 4.4 x 48.26 x 4.47 cm (1RU)
Weight 0.5 lbs (0.23 kg)
Temperature 0 - 40 degrees C
Power supply
Input voltage 100 to 240VAC
Input frequency 50 to 60Hz
Current RMS (Max) 0.6A
Output voltage 12VDC
Current (max) 1.5A
Dimensions (HxWxD) 2.91x1.71x1.33in / 7.4x4.35x3.4 cm
Weight 0.5 lbs (0.23 kg)
Temperature 0 - 40 degrees C
Humidity 20 - 85% non-condensing
Certifications RCP-120 and power supply
EMI/EMC EN55022:2006, Class A, FCC Part 15 Subpart B Class B
Safety EN60065, EN60950
Order n° RCP-120 R9004670
Specifications
