RELIABLE ENERGY SAVINGS, INC An Authorized Affiliate of Energy Automation Systems, Inc Introduction...

RELIABLE ENERGY SAVINGS, INC An Authorized Affiliate of Energy Automation Systems, Inc

Introduction to Reliable Energy Savings Inc. Introduction to Reliable Energy Savings Inc.

Mufadddal Mirza, Chief Knowledge CoachMufadddal Mirza, Chief Knowledge Coach

[email protected]@gmail.com

PH: (92) – 333 – 228 - 3257 PH: (92) – 333 – 228 - 3257

www.reliable-savings.com

Hashim Arastu, PresidentHashim Arastu, President

44487 Oak Forest Dr, Northville, MI 48168, 44487 Oak Forest Dr, Northville, MI 48168, USAUSA

PH: (001) – 248 – 605 - 5657 PH: (001) – 248 – 605 - 5657


What Makes EASI UniqueWhat Makes EASI Unique

• Valued Added / Value Engineering company

• Provide savings and power quality solutions designed for your existing electrical power systems

• Non-disruptive, custom built technology

We leave no stone unturnedWe leave no stone unturned


OverviewOverview

• Engineering and assembly locations located in the United States close to Nashville, Tennessee.

• A successful over 31 year track record with installations in over 60 countries.

• Provide our customers with savings within a pre-specified (customer-desired) payback period

• Installation of environmental green technology that increases the customer’s bottom line.


Why Start an EASI Energy Why Start an EASI Energy Project?Project?

Electrical Costs

0

2

4

6

8

10

12

14

16

2002 2003 2004 2005 2006 2007 2008 2009 2010Year

Cen

ts (

US

) p

er K

WH

ResidentialCommercialIndustrial

Electrical costs predicted to increase 20+ percent over next Electrical costs predicted to increase 20+ percent over next 3 years3 years

* 2008, 2009 and 2010 are estimates


EASI SavingsEASI Savings

Area of Facility Typical Savings Ranges

Equipment 2% - 18%

motors, pumps, fans, conveyors, welders, VFD, DC Drive, etc

Air Conditioning 12% - 40%

Refrigeration 12% - 40%

Lighting 20% - 50%


Opportunities to Consider:

• Reduce air leaks in compressed air system

• Reduce pressure drop in compressed air system

• Minimize / eliminate inappropriate use of compressed air

• Use of variable speed control

• Improve air intake & condensate drain management

• Utilize heat recovery effectively

Compressed Air ManagementCompressed Air Management


Starpak Thermal SavingsStarpak Thermal Savings

• Air-to-air heat exchangers for preconditioning fresh make-up air -- Typical Savings, 15% - 70%

• Pre-heating (Improve Building User Comfort, Reduce heat costs)• Pre-cooling (Improve Building User Comfort, Reduce A/C costs)• Humidity Control

• Flue gas to water 'HeatGrabbers’ -- Typical Savings, 15% - 25%

• Flue capture of various types • Highly cost-effective condensing economizers• Applications:

• Boilers, Industrial Waste Heat Processes• Laundry Dryers


Starpak Thermal Savings Starpak Thermal Savings Continued….Continued….

• Water-to-water heat exchangers -- Typical Savings, 70% - 90%

• with the same wide reaching applications

• Solar Thermal Energy: -- Typical Savings, 20% - 75%

• Industrial Process Hot Water Needs• Building Space Heating• Building Desiccant dehumidification cooling

• Improve Building User Comfort, Reduce A/C Usage• Pool/spa heating • Commercial Hot Water Needs

• Hospitals, Apartments, Restaurants, Laundromats


Starpak Thermal Savings Starpak Thermal Savings Continued …..Continued …..

• Highly cost-effective thermal storage systems which provide 24-7 rock-steady supply of this captured energy for a wide variety of applications:

• Industrial Process Hot Water• Space Heating• Desiccant dehumidification cooling• Pool/spa heating


• We approach projects with the understanding that the savings generated must pay back our clients’ capital investment needs in a reasonable period of time.

• Typical energy cost savings range from 6 to 30 percent.

• Typical payback periods range from 18 to 40 months.

• Guaranteed savings (payback period) underwritten by Lloyd’s of London.

EASI MethodEASI Method


EASI Will:EASI Will:

• Reduce or eliminate distribution losses: I2R – 1% - 2%: Skin effect losses– 2% to 8%; Proximity effect losses– 1.5% to 3%; Hysteresis losses – 2% to 5%; Eddy-current losses- 1% to 3%; Transformer losses- 1% to 2%

• Cancel or mitigate harmonic current.

• Reduce voltage sags/swells, flickering and spikes.

• Reduce/cancel reactive current required by facility loads.


EASI Will: EASI Will: Continued ….Continued ….

• Reduce power demanded by air conditioning and refrigeration (improve heat transfer, increase lubricity, and reduce motor cycling).

• Reduce power demanded by lighting.

• Reduce equipment maintenance and replacement costs.

• As a rule of thumb – for every 10 degree Celsius increase in motor temperature the motor life is decreased by 50%



• Eliminate power factor penalty, if one exists.

• Reduce kW demand charge.

• Increase electrical capacity.

• Install equipment that has a mean time between failures of 180,000 + Hours (20 + year average lifetimes).



• Provide following benefits for cooling towers• Eliminate cooling tower (HVAC condenser)

chemicals, which results in elimination of their storage, handling, sewer discharge

• Eliminate cleaning of chillers and cooling towers for scale and biological accumulation

• Reduce• Water consumption by 5% -- 30%• Sewer discharge by 5% -- 35%• Electrical consumption by 7% -- 25%


STARPAK WILL: STARPAK WILL:

• Reduce heating and air conditioning consumption

• Utilize waste heat effectively

• Provide alternate energy -- Solar Thermal

• Improve building air quality


• Cause disruptions in the facility.

• Place a burden on customer’s engineering/maintenance departments during product installation.

We Won’t:We Won’t:


Pounds Substance Comments

22,160 SO2

Sulphur Dioxide - Associated with visible pollution (haze) and acid rain. Reduction of 2,615 pounds

60,190 NOx

Oxides of Nitrogen - Created when nitrogen is burned as part of the combustion process, one of the main causes of ozone (smog), also associated with acid rain.Reduction of 7,103 pounds

1,642 PM10Particulate matter smaller then 10 microns - associated with lung ailments. Reduction of 193.7 pounds

28,430,000 CO2

CO2, Carbon Dioxide, is a normal atmospheric component. However, increased levels are likely to cause future climate changes. Reduction of 3,354,000 pounds or 1,677 tons.

2,462 VOCsVolatile Organic Compounds - One of the primary causes of ozone (smog), also some of the individual compounds are toxic. Reduction of 290.6 pounds.

Cooling Water Consumption

10,260,000 Gallons

Because power plants are typically only about 36 percent efficient, they throw off an enormous amount of waste heat. This is typically dissipated by evaporating water, making power plants rather large water consumers. Savings of 1,211,000 gallons.

Emissions Reduction $50,000 per Month Spend-Small Facility


Some Satisfed EASI CustomersSome Satisfed EASI Customers


GE Projects GE Projects CompletedCompleted

Bay Saint Louis MississippiPlastics facility sold to SabicProject completed July of 2007Quoted 11.5% KWH reduction – Actual savings is 14.0%Annual projected savings $507,600

Waterford New YorkSilicone facility sold to ApolloProject completed September 2007Quoted 9.8% KWH reduction – Actual savings is 10.6%Annual projected savings $1,447,200 and eliminated power factor penalty


GE Projects GE Projects CompletedCompleted

Mt. Vernon IndianaPlastics facility sold to SabicPhase I project completed January 2008Quoted a monthly reduction of 4,800,000 KWH and are achieving this.Annual projected savings $2,484,000

Burkville AlabamaPlastics facility sold to SabicProject completed May 2008Quoted 9.8% KWH reduction – M&V StartingAnnual projected savings $2,118,000


Customer StudyCustomer StudyBritish AerospaceBritish Aerospace

• EASI Guaranteed:• 13.6% Savings• 30 Month Payback

• Customer Received• 15.2 % Savings• 27 Month Payback

Installation over Multiple Buildings in a CampusInstallation over Multiple Buildings in a Campus


Customer StudyCustomer StudyTempur-PedicTempur-Pedic

• EASI Guaranteed:• 15.2% Savings• 33 Month Payback

• Customer Received• 20.6 % Savings• 24 Month Payback

Fixed Harmonics Issues – saved over $100,000 in failed DrivesFixed Harmonics Issues – saved over $100,000 in failed Drives


Customer StudyCustomer StudyTepro/CKR (5 Installations)Tepro/CKR (5 Installations)

• EASI Guaranteed on First Project:

• 11% Savings• 24 Month Payback

• Customer Received• Almost 24 % Savings• 11 Month Payback

Large Resistive Loads-Windshield MoldingsLarge Resistive Loads-Windshield Moldings


The EASI Process is SimpleThe EASI Process is Simple

1. Facility review:• 12 months electrical bills• 2 page survey• Technical walk through of facility• Preliminary metering

2. Presentation of expected results:• Formal quote of engineering and design study cost.• Estimate of minimum savings, payback range and

maximum total project cost.


The EASI ProcessThe EASI ProcessContinued …Continued …

3. Engineering and design study:• Very extensive site survey of all electrical loads in the

facility• Analysis of savings opportunities and selection and

placement of appropriate technologies to provide cost-effective savings

• Cost, payback, and schedule determined and agreed upon• Measurement and verification agreed upon

4. Equipment Manufacture and Installation:• Turn-key-Fixed Price• Closely coordinated with the facility

5. On-going Measurement and verification to assure goals are achieved (IPMVP)


Key PointsKey Points

• We are an engineering company. • We use data to show opportunities for reduction• We use data to develop designs• We use data to show savings

• We utilize proven technology• Our solution is specific for our client’s entire electrical

system

• The EASI guarantee. You get what we told you!• Projects insured through Lloyd’s of London


Next StepsNext Steps Contact Reliable Energy Savings, Inc at 92-21-Contact Reliable Energy Savings, Inc at 92-21-

32790839 or [email protected] and 32790839 or [email protected] and schedule a free initial energy evaluationschedule a free initial energy evaluation

RELIABLE ENERGY SAVINGS, INC An Authorized Affiliate of Energy Automation Systems, Inc Introduction...

Documents

Transcript of RELIABLE ENERGY SAVINGS, INC An Authorized Affiliate of Energy Automation Systems, Inc Introduction...