BlockMaster Electronics, Inc. (800)595-8881 www.blockmaster.com 28

Pluggable Terminal Blocks CTM Headers3.5 and 3.81mm

Ordering Information

CTM Screw Flange Headers3.5 and 3.81mm

Dimensions Dimensions

10A 150V 10A 150VSpecifications:CTM Series

Style Front Side

0P

9P

closed endvertical

closed endright angle

Style Front Side

0V

9V

verticalwith

lockingscrewflange

right anglewith

lockingscrewflange

Ordering Information

n=number of polesL=(n-1) x 3.5/3.81

n=number of polesL=(n-1) x 3.5/3.81

Features:*CTM headers for use with CTF plugs*Compact 3.5/3.81mm spacing saves PCB real estate*2 to 25 positions single mold*Coded to prevent plugging in upside down*Locking screw flange headers to mate with locking CTF “V” Series

ElectricalCurrent(3.5/3.81): 10A @ 150VPin dimension: 0.8mm x 0.8mmCR: 109 Ω (500V DC)Operating temp: -40oC to +110oCPCB holes: min 1.2mmPCB thickness: max 2.4mmClimactic category: 40/110/21 Acc. to IEC 68-1

MaterialsHousing: Polyamide 6,6 (UL94V-0)Terminal pin: Bronze,Tin platedColors available: Green is standard

Black is optional

MarkingConsult factory for marking options.

Right Angle Right Angle

VerticalVertical

3.5mm and 3.81mm pluggable blocks!

Mini European PCB Terminal Blocks MTS Series MTS 90° Series

Specifications: MTS Series 12A 300V 3.5 and 3.81 mm 7A 250V 3.5 and 3.81 mm Features: • Compact 3.5 or 3.81 spacing • MTS is supplied with the clamp in the open position • Double captive screws • Elevator clamp system • Testing points • 2 to 25 positions single mold • Housing is resistant to chlorinated solvents, with no

dioxin or detrimental to health halogens • Every position of this product is mechanically and

electrically tested during assembly to ensure a 100% defect free product

• Minimum 5 microns of tin plating on terminal for easy soldering

Electrical

Current: Wire Range: Wire Section: (mm²) Pin Dimension: CR: IR: Operating temp: Stripping Length: Torque: PCB Holes: PCB Thickness: Climatic Category:

12A @ 300V 14-30 AWG 0.05 to 1.3mm² 0.8mm x 0.4mm 10M� (500V DC) -40°C - +110°C 5mm 0.13 Nm min 1.1mm max 2.3mm 40/110/21 Acc. To IEC 68-1

Materials

Housing: Clamp: Terminal: Screw: Colors Available:

Polyamide 6,6 (UL 94V-O) Copper Alloy, NI plated Copper Alloy, Tin-plated M2, Copper Alloy, Ni plated Green and Black

Marking Adhesive strips not available Ink marking by factory (specify in order number): Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility 0 = no printing A= upside down printing (consecutive #’s R to L) B= regular printing (consecutive #’s L to R)

Dimensions n = number of poles

L=(n-1) x 3.5 (for 3.5mm spacing) L=(n-1) x 3.81 (for 3.81mm spacing)

Ordering Information

Dimensions n = number of poles

L=(n-1) x 3.5 (for 3.5mm spacing) L=(n-1) x 3.81 (for 3.81mm spacing)

Ordering Information

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

MTS 0 -

Poles

Marking 0,A,B

Spacing 8=3.5

T=3.81

Color Blank=Green

ON=Black

MTS 9 -

Poles

Marking 0,A,B

Spacing 8=3.5

T=3.81

Color Blank=Green

ON=Black

Mini European PCB Terminal Blocks MSB Series MSB 90° Series

Specifications: MSB Series 13.5A 300V 5 and 5.08mm 13.5A 300V 5 and 5.08mm Features: • 5.00 or 5.08mm spacing • MSB is supplied with the clamp in the open position • Double captive screws • Elevator clamp system • Testing points/holes • 2 to 25 positions single mold • 2 to 36 positions modular • 2 position blocks can be ordered with clamping pegs

to reduce torque levels on the PCB and surpass VDE • Housing is resistant to chlorinated solvents, with no

dioxin or detrimental to health halogens • Every position of this product is mechanically and

electrically tested during assembly to ensure a 100% defect free product

• Minimum 5 microns of tin plating on terminal for easy soldering

Electrical

Current: Wire Range: Wire Section: (mm²) Pin Dimension: CR: IR: Operating temp: Stripping Length: Torque: PCB Holes: PCB Thickness: Climatic Category:

13.5A @ 300V 16-30 AWG 0.05 to 1.5mm² .9mm x 0.5mm 10M� (500V DC) -40°C - +110°C 5mm 0.5 Nm min 1.1mm max 2.4mm 40/110/21 Acc. To IEC 68-1

Materials

Housing: Clamp: Terminal: Screw: Colors Available:

Polyamide 6,6 (UL 94V-O) Copper Alloy, NI plated Copper Alloy, Tin-plated M3, Copper Alloy, Ni plated Green and Black

Marking Adhesive marking strips for 5 and 5.08mm centers

Numbered 1-10 11-20 21-30 31-40 41-50

Order Number ESA014000110 ESA014001120 ESA014002130 ESA014003140 ESA014004150

Adhesive strips not available Ink marking by factory (specify in order number): Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility 0 = no printing A= upside down printing (consecutive #’s R to L) B= regular printing (consecutive #’s L to R)

Custom markings are welcome with minimum order - Contact factory Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

Ordering Information Ordering Information

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

MSB 0 -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

MSB 9 -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

Mini European PCB Terminal Blocks 301/311 Series 300/310 Series

Specifications: 301/311/300/310 Series 10A 250V 5 mm 10A 250V 5 mm Features: • Economical wire protector products • 2 and 3 position modular • Machined type inserts • 301/310 series are low profile blocks • 300/310 series have test holes and higher profile • 300 and 301 are vertical mount blocks • 310 and 311 are right angle blocks • Wire protector system • Black and blue colors available

301 Series (vertical) 300 Series (vertical) Electrical

Current: Wire Range: Pin Dimension: CR: IR: Operating temp: Stripping Length: Torque: PCB Holes: PCB Thickness:

10A @ 250V 14-16 AWG 1mm 5000M� (1000V DC) -55°C - +105°C 6mm 4.5 lb-in min 1.6mm max 2.3mm

Materials

Housing: Metal Housing: Wire Guard Terminal: Screw: Colors Available:

PBT-4115 (UL 94V-O) Brass (Cu, Zn), Cu, Tin plated Stainless steel Brass (Cu, Zn), Tin plated M2.6, steel, chromated and galvanized Black, blue

301 Series (vertical) 310 Series (vertical)

Marking

Ordering Information

Dimensions n = number of poles

L=(n-1) x 5.00

Dimensions n = number of poles

L=(n-1) x 5.00

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

Adhesive marking strips not available Ink marking by factory (specify in order number) 0=no marking 1=numbered 1 2 3 4 etc. left to right Minimums apply for marking Contact factory for additional information

301 1 - 1 00

311

Poles 2-25

Color 0=black 6=blue

300 1 - 1 00

310

Poles 2-25

Color 0=black 6=blue

Mini European PCB Terminal Blocks MSG Series PA001/PA002 Series

Specifications: MSG Series 17.5A 150V 5 and 5.08 mm 10A 300V 5 mm Features: • MSG is supplied with clamp in the open position • Double captive screws • Elevator clamp system • Testing points • 2 to 25 positions single mold • 2 to 30 positions modular • Housing is resistant to chlorinated solvents, with no

dioxin or detrimental to health halogens • Every position of this product is mechanically and

electrically tested during assembly to ensure a 100% defect free product

• Minimum 5 microns of tin plating on terminal for easy soldering

PA001 Series (vertical)

Electrical

Current: Wire Range: Wire Section: (mm²) Pin Dimension: CR: IR: Operating temp: Stripping Length: Torque: PCB Holes: PCB Thickness: Climatic Category:

17.5A @ 300V 14-30 AWG 0.05 to 2.5mm² 1mm x 0.8mm 10M� (500V DC) -40°C - +110°C 5.5mm 0.5 Nm min 1.4mm max 2.4mm 40/110/21 Acc. To IEC 68-1

Materials PA002 Series (right angle)

Housing: Clamp: Terminal: Screw: Colors Available:

Polyamide 6,6 (UL 94V-O) Copper Alloy, NI plated Copper Alloy, Tin-plated M3, Copper Alloy, Ni plated Green, black

Marking See information on MSM series

Specifications: PA001/PA002 Series

Features: • Economical wire protector style • Captive Screws • 2 and 3 position modular • Machine stamped inserts • Phil/slot combo screw • Vertical and right angle styles

Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

Dimensions n = number of poles

L=(n-1) x 5

Electrical

Current: Wire Range: Pin Dimension: CR: IR: Operating Temp: Stripping Length: Torque: PCB holes

10A @ 300V 14 to 26 AWG 0.6mm x 1.1mm 500M� (500V DC) -35°C - +75°C 6.5mm .23 Nm min 1.5mm Ordering Information Ordering Information

Materials

Housing: Wire Guard: Terminal: Screw: Color available:

Thermoplastic-UL94V2 Steel Brass, Tin plated M2.5, steel, yellow chromated Blue

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

MSG 0 -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

PA001 - 1 - 1002

PA002 Poles 02 to 16

Mini European PCB Terminal Blocks MSM Series MSM 90° Series

Specifications: MSM Series 17.5A 300V 5 and 5.08mm 17.5A 300V 5 and 5.08mm Features: • MSM is supplied with the clamp in the open position • Double captive screws • Elevator clamp system • Testing points/holes • 2 to 25 positions single mold • 2 to 30 positions modular • Housing is resistant to chlorinated solvents, with no

dioxin or detrimental to health halogens • Every position of this product is mechanically and

electrically tested during assembly to ensure a 100% defect free product

• Minimum 5 microns of tin plating on terminal for easy soldering

Electrical

Current: Wire Range: Wire Section: (mm²) Pin Dimension: CR: IR: Operating temp: Stripping Length: Torque: PCB Holes: PCB Thickness: Climatic Category:

17.5A @ 300V 12-30 AWG 0.05 to 2.5mm² 1mm x 0.8mm 109� (500V DC) -40°C - +110°C 6mm 0.5 Nm min 1.4mm max 2.8mm 40/110/21 Acc. To IEC 68-1

Materials

Housing: Clamp: Terminal: Screw: Colors Available:

Polyamide 6,6 (UL 94V-O) Copper Alloy, NI plated Copper Alloy, Tin-plated M3, Copper Alloy, Ni plated Green and Black

Marking Numbered marking strips for 5 and 5.08mm centers

Numbered 1-10 11-20 21-30 31-40 41-50

Order Number ESA014000110 ESA014001120 ESA014002130 ESA014003140 ESA014004150

Also available with a 270° pin bend

Ink marking by factory (specify in order number): Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility 0 = no printing A= upside down printing (consecutive #’s R to L) B= regular printing (consecutive #’s L to R)

Custom markings are welcome with minimum order - Contact factory Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

(Also available in 10mm and 10.16mm centers)

Ordering Information

(Also available in 10mm and 10.16mm centers)

Ordering Information

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

MSM 0 -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

MSM 9 -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

Mini European PCB Terminal Blocks MSM 35° Series 320 Series

Specifications: MSM Series 17.5A 300V 5 and 5.08mm 10A 300V 5mm Features: • MSM is supplied with the clamp in the open position • Captive screws • Elevator clamp system • Testing points/holes • 2 to 25 positions single mold • 2 to 36 positions modular • Housing is resistant to chlorinated solvents, with no

dioxin or detrimental to health halogens • Every position of this product is mechanically and

electrically tested during assembly to ensure a 100% defect free product

• Minimum 5 microns of tin plating on terminal for easy soldering

Electrical:

Current: Wire Range: Wire Section: (mm²) Pin Dimension: CR: IR: Operating temp: Stripping Length: Torque: PCB Holes: PCB Thickness: Climatic Category:

17.5A @ 300V 12-30 AWG 0.05 to 2.5mm² 1mm x 0.8mm 109� (500V DC) -40°C - +110°C 6mm 0.5 Nm min 1.4mm max 2.8mm 40/110/21 Acc. To IEC 68-1

Materials:

Housing: Clamp: Terminal: Screw: Colors Available:

Polyamide 6,6 (UL 94V-O) Copper Alloy, NI plated Copper Alloy, Tin-plated M3, Copper Alloy, Ni plated Green and Black

Marking (See marking information on page 8)

Specifications: 320 Series Features:

• Economical solution for angled wire entry • 2– and 2– position modular • Rising clamp for secure connection

Electrical : Current: Wire range: Pin Dimension: CR: IR: Operating temp: Stripping length: Torque: PCB holes: PCB thickness: Materials: Housing: Wire protector: Terminal: Screw: Colors available: Marking Not available

10A @ 300v 14 to 22 AWG 1mm x 0.7mm 109¿ (500VDC) -40°C to +110°C 7mm 4.5 lb-in Min 1.4mm Max 2.4mm PBT-4115 (UL94V-0) Plated steel Brass, tin plated M2.6, steel, zinc plated Black (std), blue

Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

Dimensions n = number of poles

L=(n-1) x 5.00

(Also available in 10mm and 10.16mm centers)

Ordering Information

(Also available in 10mm centers)

Ordering Information

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

320 - 1 - 1 00

Poles Color 0=Black 6=Blue

MSM 4 -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

Mini European PCB Terminal Blocks MSQ Series MSQ 90° Series

Specifications: MSQ Series 24A 300V 5 and 5.08mm 24A 300V 5 and 5.08mm Features: • MSQ is supplied with the clamp in the open position • Double captive screws • Elevator clamp system • Testing points/holes • 2 to 25 positions single mold • 2 to 30 positions modular • Housing is resistant to chlorinated solvents, with no

dioxin or detrimental to health halogens • Every position of this product is mechanically and

electrically tested during assembly to ensure a 100% defect free product

• Minimum 5 microns of tin plating on terminal for easy soldering

Electrical

Current: Wire Range: Wire Section: (mm²) Pin Dimension: CR: IR: Operating temp: Stripping Length: Torque: PCB Holes: PCB Thickness: Climatic Category:

24A @ 300V 12-30 AWG 0.05 to 4mm² 1mm x 0.8mm 109� (500V DC) -40°C - +110°C 6.5mm 0.5 Nm min 1.4mm max 2.4mm 40/110/21 Acc. To IEC 68-1

Materials

Housing: Clamp: Terminal: Screw: Colors Available:

Polyamide 6,6 (UL 94V-O) Copper Alloy, NI plated Copper Alloy, Tin-plated M3, Copper Alloy, Ni plated Green and Black

Marking Numbered marking strips for 5 and 5.08mm centers

Numbered 1-10 11-20 21-30 31-40 41-50

Order Number ESA014000110 ESA014001120 ESA014002130 ESA014003140 ESA014004150

Ink marking by factory (specify in order number): Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility 0 = no printing A= upside down printing (consecutive #’s R to L) B= regular printing (consecutive #’s L to R)

Custom markings are welcome with minimum order - Contact factory Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

(Also available in 10mm and 10.16mm centers)

Ordering Information

(Also available in 10mm and 10.16mm centers)

Ordering Information

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

MSQ 0 -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

MSQ 9 -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

Mini European PCB Terminal Blocks MSM Series MSM90° Series

Specifications: MSM Series 17.5A 300V 7.5 and 7.62mm 17.5A 300V 7.5 and 7.62mm Features: • MSM is supplied with the clamp in the open position • Captive screws • Elevator clamp system • Testing holes • 2 to 4 positions single mold • 2 to 25 positions modular • Housing is resistant to chlorinated solvents, with no

dioxin or detrimental to health halogens • Every position of this product is mechanically and

electrically tested during assembly to ensure a 100% defect free product

• Minimum 5 microns of tin plating on terminal for easy soldering

Electrical

Current: Wire Range: Wire Section: (mm²) Pin Dimension: CR: IR: Operating temp: Stripping Length: Torque: PCB Holes: PCB Thickness: Climatic Category:

17.5A @ 300V 12-30 AWG 0.05 to 2.5mm² 1mm x 0.8mm 109� (500V DC) -40°C - +110°C 5.5mm 0.5 Nm min 1.4mm max 2.4mm 40/110/21 Acc. To IEC 68-1

Materials

Housing: Clamp: Terminal: Screw: Colors Available:

Polyamide 6,6 (UL 94V-O) Copper Alloy, NI plated Copper Alloy, Tin-plated M3, Copper Alloy, Ni plated Green and Black

Marking Adhesive marking strips for 7.5 and 7.62mm centers

Numbered 1-10 11-20 21-30

Order Number ES34000110 ES34001120 ES34002130

Ink marking by factory (specify in order number): Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility 0 = no printing A= upside down printing (consecutive #’s R to L) B= regular printing (consecutive #’s L to R)

Custom markings are welcome with minimum order - Contact factory Dimensions n = number of poles

L=(n-1) x 7.50 (for 7.50mm spacing) L=(n-1) x 7.62 (for 7.62mm spacing)

Dimensions n = number of poles

L=(n-1) x 7.50 (for 7.50mm spacing) L=(n-1) x 7.62 (for 7.62mm spacing)

Ordering Information

Ordering Information

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

MSM 0 -

Poles

Marking 0,A,B

Spacing 3=7.5mm

7=7.62mm

Color Blank=Green

ON=Black

MSM 9 -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

Mini European PCB Terminal Blocks MSQ Series MSQ90° Series

Specifications: MSQ Series 24A 300V 7.5 and 7.62mm 24A 300V 7.5 and 7.62mm Features: • MSQ is supplied with the clamp in the open position • Captive screws • Elevator clamp system • Testing holes/points • 2 to 4 positions single mold • 2 to 25 positions modular • Housing is resistant to chlorinated solvents, with no

dioxin or detrimental to health halogens • Every position of this product is mechanically and

electrically tested during assembly to ensure a 100% defect free product

• Minimum 5 microns of tin plating on terminal for easy soldering

Electrical

Current: Wire Range: Wire Section: (mm²) Pin Dimension: CR: IR: Operating temp: Stripping Length: Torque: PCB Holes: PCB Thickness: Climatic Category:

24A @ 300V 12-30 AWG 0.05 to 4mm² 1mm x 0.8mm 109� (500V DC) -40°C - +110°C 6.5mm 0.5 Nm min 1.4mm max 2.4mm 40/110/21 Acc. To IEC 68-1

Materials

Housing: Clamp: Terminal: Screw: Colors Available:

Polyamide 6,6 (UL 94V-O) Copper Alloy, NI plated Copper Alloy, Tin-plated M3, Copper Alloy, Ni plated Green and Black

Marking Adhesive marking strips for 7.5 and 7.62mm centers

Numbered 1-10 11-20 21-30

Order Number ES34000110 ES34001120 ES34002130

Ink marking by factory (specify in order number): Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility 0 = no printing A= upside down printing (consecutive #’s R to L) B= regular printing (consecutive #’s L to R)

Custom markings are welcome with minimum order - Contact factory Dimensions n = number of poles

L=(n-1) x 7.50 (for 7.50mm spacing) L=(n-1) x 7.62 (for 7.62mm spacing)

Dimensions n = number of poles

L=(n-1) x 7.50 (for 7.50mm spacing) L=(n-1) x 7.62 (for 7.62mm spacing)

Ordering Information

Ordering Information

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

MSQ 0 -

Poles

Marking 0,A,B

Spacing 3=7.5mm

7=7.62mm

Color Blank=Green

ON=Black

MS 9 -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

MSQ 9 -

Poles

Marking 0,A,B

Spacing 3=7.5mm

7=7.62mm

Color Blank=Green

ON=Black

EuroPCB Tower Terminal Blocks PSB M Series PSB H Series

Specifications: PSB Series 13.5A 300V 5 and 5.08mm 13.5A 300V 5 and 5.08mm Features: • PSB is supplied with the clamp in the open position • Double captive screws • Elevator clamp system • Testing points/holes • 2 and 3 positions single mold • Up to 30 positions modular • Housing is resistant to chlorinated solvents, with no

dioxin or detrimental to health halogens • Positions are contacts per row, not total contacts • All PSB and MSB blocks can be interlocked to form

custom configurations • Every position of this product is mechanically and

electrically tested during assembly to ensure a 100% defect free product

• Minimum 5 microns of tin plating on terminal for easy soldering

Electrical

Current: Wire Range: Wire Section: (mm²) Pin Dimension: CR: IR: Operating temp: Stripping Length: Torque: PCB Holes: PCB Thickness: Climatic Category:

13.5A @ 300V 16-30 AWG 0.05 to 1.5mm² 0.9mm x 0.5mm 109� (500V DC) -40°C - +110°C 5mm 0.5 Nm min 1.1mm max 2.4mm 40/110/21 Acc. To IEC 68-1

Materials

Housing: Clamp: Terminal: Screw: Colors Available:

Polyamide 6,6 (UL 94V-O) Copper Alloy, NI plated Copper Alloy, Tin-plated M3, Copper Alloy, Ni plated Green and Black

Marking Numbered marking strips for 5 and 5.08mm centers

Numbered 1-10 11-20 21-30 31-40 41-50

Order Number ESA014000110 ESA014001120 ESA014002130 ESA014003140 ESA014004150

Ink marking by factory (specify in order number): Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility 0 = no printing A= upside down printing (consecutive #’s R to L) B= regular printing (consecutive #’s L to R)

Custom markings are welcome with minimum order - Contact factory Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

(Also available in 10mm and 10.16mm centers)

Ordering Information

(Also available in 10mm and 10.16mm centers)

Ordering Information

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

PSB M -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

PSB H -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

PSB K Series PSB T Series 13.5A 300V 5 and 5.08mm 13.5A 300V 5 and 5.08mm

Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

Ordering Information

(Ordering Information

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

13.5A 300V 5 and 5.08mm

PSB D Series

Ordering Information

Dimensions n = number of poles

L=(n-1) x 5.00 (for 5.00mm spacing) L=(n-1) x 5.08 (for 5.08mm spacing)

PSB K -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

PSB T -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

PSB D -

Poles

Marking 0,A,B

Spacing 1=5mm 5=5.08

Color Blank=Green

ON=Black

PSM

Marking 1=5mm5=5,08mm

Spacing

(02 to 30)Poles

0,A,B

HBlank=GreenON=Black

0.84.2

10.2

35.6

3.8

(3.8)

2.5

L+5

24.2

0.5

5 1(2.54)(5.08)

(L+5.08)L+5

2.5

0.5

15

13.8

(L+5.08)

(5.08) (2.54)

2 8.2

25.2

3.8

0.8

10.2

(1.76) (8.44)

(5.08)

L

5PCB Layout

(5.08)

L

5PCB Layout

BlockMaster Electronics, Inc.(800)595-8881 www.blockmaster.com13

PSM M Series PSM H Series5 and 5.08mm 5 and 5.08mm

ElectricalCurrent: 17.5A @ 300VWire range: 12 to 30 AWGWire section(mm2): 0.05 to 2.5mm2Pin dimension: 1mm x 0.8mmCR: 109 Ω (500V DC)Operating temp: -40oC to +110oCStripping length: 5.5mmTorque: 0.5 NmPCB holes: min 1.4mmPCB thickness: max 2.8mmClimactic category: 40/110/21 Acc. to IEC 68-1

MaterialsHousing: Polyamide 6,6 (UL94V-0)Clamp: Copper alloy, Ni platedTerminal: Copper alloy, Tin platedScrew: M3, copper alloy, Ni platedColors available: Green, black

MarkingAdhesive marking strips 5 and 5.08mm centers.Numbered Order Number1-10 ESA1400011011-20 ESA1400112021-30 ESA1400213031-40 ESA1400314041-50 ESA14004150

Ink marking by factory (specify in order number):Factory ink is permanent and will not rub off. Inkhas fluorescent tint for greater visibility.0=no printingA=upside down printing (consecutive #’s R to L)B=regular printing (consecutive #’s L to R)

Custom markings are welcome with minimum order.Contact factory for information.

Dimensions

EuroPCB Tower Terminal Blocks

n=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

Specifications:PSM Series

Ordering Information

17.5A 300V 17.5A 300V

Dimensionsn=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

Ordering Information

Features:*PSM is supplied with clamp in the open position*Double captive screws*Elevator clamp style*Testing holes/points*2 and 3 positions single mold*Up to 30 positions modular*Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.*Positions are contacts per row, not total contacts*All PSM and MSM blocks can be interlocked to form custom configurations*Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.*Minimum 5 microns of tin plating on terminal for easy soldering.

Also available in 10mm and 10.16mm centers. Also available in 10mm and 10.16mm centers.

PSM

Marking 1=5mm5=5,08mm

Spacing

(02 to 30)Poles

0,A,B

MBlank=GreenON=Black

154.5

0.8

14.8

3.8

(15.24)25

.2

33.7

10(10.16)

35.6

4.2(3.8)

L+5

2.5

2.5

0.5

0.9 5

13.8

(2.54)(5.08)

(L+5.08)

(2.54)

24.2

PSM

Marking 1=5mm5=5,08mm

Spacing

(02 to 30)Poles

0,A,B

KBlank=GreenON=Black

5

PCB Layout

(5.08)2.5

(2.54)

L

10(1

0.16

)

8.2

14.8

3.8

25.2

22.4

10(10.16) (8.44)

35.6

4.2(3.8)

L+5

2.5

2.5

0.5

0.9 5

13.8

(2.54)(5.08)

(L+5.08)

(2.54)

25.2

PSM

Marking 1=5mm5=5,08mm

Spacing

(02 to 30)Poles

0,A,B

DBlank=GreenON=Black

5

PCB Layout

(5.08)2.5(2.54)

L

15(1

5.24

)

L+5 2.5

2.5

0.5

0.9 5

13.8

(2.54)(5.08)

(L+5.08) (2.54)

BlockMaster Electronics, Inc. (800)595-8881 www.blockmaster.com 14

PSM K Series PSM T Series5 and 5.08mm 5 and 5.08mm

Dimensionsn=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

Ordering Information

17.5A 300V 17.5A 300V

Dimensionsn=number of polesL=(n-1) x 5 (for 5mm)L=(n-1) x 5.08 (for 5.08mm spacing)

Ordering Information

PSM D Series5 and 5.08mm

Dimensionsn=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

Ordering Information

17.5A 300V

Also available in 10mm and 10.16mm centers.Also available in 10mm and 10.16mm centers. Also available in 10mm and 10.16mm centers.

21.5

2 154.5

0.8

14.8

3.8

25.2

(15.24)(1.76)

PSM

Marking 1=5mm5=5,08mm

Spacing

(02 to 30)Poles

0,A,B

TBlank=GreenON=Black

PCB Layout

L

5(5.08)

2.5(2.54)

15(1

5.24

)10

(10.

16)

(L+5.08)

(2.54)

30.3

51

0.5

L+5

2.5(5.08)

(L+5.08)

(5.08) (2.54)

L+5

16.8 0.5

2.551

10.9

6.90.8

454

(7.3)

(9.14)

10.9

0.88.9

31.5

4

(5.08)

L

5PCB Layout

(5.08)

L

5PCB Layout

BlockMaster Electronics, Inc.(800)595-8881 www.blockmaster.com15

PSQ M Series PSQ H Series5 and 5.08mm 5 and 5.08mm

ElectricalCurrent: 24A @ 300VWire range: 12 to 30 AWGWire section(mm2): 0.05 to 4mm2Pin dimension: 1mm x 0.8mmCR: 109 Ω (500V DC)Operating temp: -40oC to +110oCStripping length: 6.5mmTorque: 0.5 NmPCB holes: min 1.4mmPCB thickness: max 2.4mmClimactic category: 40/110/21 Acc. to IEC 68-1

MaterialsHousing: Polyamide 6,6 (UL94V-0)Clamp: Copper alloy, Ni platedTerminal: Copper alloy, Tin platedScrew: M3, copper alloy, Ni platedColors available: Green, black

MarkingAdhesive marking strips 5 and 5.08mm centers.Numbered Order Number1-10 ESA1400011011-20 ESA1400112021-30 ESA1400213031-40 ESA1400314041-50 ESA14004150

Ink marking by factory (specify in order number):Factory ink is permanent and will not rub off. Inkhas fluorescent tint for greater visibility.0=no printingA=upside down printing (consecutive #’s R to L)B=regular printing (consecutive #’s L to R)

Custom markings are welcome with minimum order.Contact factory for information.

Dimensions

EuroPCB Tower Terminal Blocks

n=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

Specifications:PSQ Series

Ordering Information

24A 300V 24A 300V

Dimensionsn=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

Ordering Information

Features:*PSQ is supplied with clamp in the open position*Double captive screws*Elevator clamp style*Testing holes/points*2 and 3 positions single mold*Up to 30 positions modular*Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.*Positions are contacts per row, not total contacts*All PSQ and MSQ blocks can be interlocked to form custom configurations*Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.*Minimum 5 microns of tin plating on terminal for easy soldering.

Also available in 10mm and 10.16mm centers.Also available in 10mm and 10.16mm centers.

PSQ

Marking 1=5mm5=5,08mm

Spacing

(02 to 30)Poles

0,A,B

MBlank=GreenON=Black

PSQ

Marking 1=5mm5=5,08mm

Spacing

(02 to 30)Poles

0,A,B

HBlank=GreenON=Black

L+52.5

2.5

0.5

1 5

(L+5.08)(2.54)

(2.54) (5.08)

45

(15.24)

34

10(10.16)

4(3.6)

31.5

18.6

40.8155

5

PCB Layout

(5.08)2.5(2.54)

L

15(1

5.24

)

45

(9.14)

22.9

10(10.16)

4(3.6)

31.5

4

8.9

L+52.5

2.5

0.5

1 5

(L+5.08)(2.54)

(2.54) (5.08)

22

(15.24)(1.76)

31.5

18.6

40.82 15

5

L+5 2.5

2.5

0.5

1 5

(L+5.08) (2.54)

(2.54) (5.08)

BlockMaster Electronics, Inc. (800)595-8881 www.blockmaster.com 16

PSQ K Series PSQ T Series5 and 5.08mm 5 and 5.08mm

Dimensionsn=number of polesL=(n-1) x 5 (for 5mm)L=(n-1) x 5.08 (for 5.08mm spacing)

Ordering Information

24A 300V 24A 300V

Dimensionsn=number of polesL=(n-1) x 5 (for 5mm)L=(n-1) x 5.08 (for 5.08mm spacing)

Ordering Information

PSQ D Series5 and 5.08mm

Dimensionsn=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

Ordering Information

24A 300V

Also available in 10mm and 10.16mm centers.Also available in 10mm and 10.16mm centers.Also available in 10mm and 10.16mm centers.

PSQ

Marking 1=5mm5=5,08mm

Spacing

(02 to 30)Poles

0,A,B

DBlank=GreenON=Black

PSQ

Marking 1=5mm5=5,08mm

Spacing

(02 to 30)Poles

0,A,B

KBlank=GreenON=Black

PSQ

Marking 1=5mm5=5,08mm

Spacing

(02 to 30)Poles

0,A,B

TBlank=GreenON=Black

5

PCB Layout

(5.08)2.5

(2.54)

L

10(1

0.16

)

PCB Layout

L

5(5.08)

2.5(2.54)

15(1

5.24

)10

(10.

16)

BlockMaster Electronics, Inc.(800)595-8881 www.blockmaster.com17

25EV Series DT123RA Series6.35mm 5 mm

ElectricalCurrent: 32A @ 150VWire range: 10 to 22 AWGPin dimension: 0.8mm x 0.8mmWirhstanding voltage:AC 2000V/minIR: >1000MΩ (500V DC)Operating temp: -30oC to +120oCStripping length: 6.5mmTorque: 5 lb-inPCB holes: min 1.1mmPCB thickness: max 4.2mm

MaterialsHousing: Polyester (UL94V-0)Clamp: Steel, Zn platedTerminal: Brass, Tin platedScrew: M3, Steel, Zinc platedColors available: Green

Dimensions

EuroPCB Terminal Blocks

n=number of polesL=(n-1) x 6.35

Features:*6.35mm (.25”) spacing to fit many board layouts*Captive screws*Testing points*Elevator style clamp*2 and 3 positions modular*Accepts #10 AWG

Specifications:25EV Series

Ordering Information

32A 150V 26A 300V

Dimensionsn=number of polesL=(n-1) x 5

Ordering Information

Also available in 7.5mm centers.

ElectricalCurrent: 26A @ 300VWire range: 12 to 22 AWGPin dimension: 0.8mm x 0.9mmWirhstanding voltage:AC 2000V/minIR: >1000MΩ (500V DC)Operating temp: -30oC to +130oCStripping length: 7.5mmTorque: 7 lb-inPCB holes: min 1.2mmPCB thickness: max 2.4mm

MaterialsHousing: PolyesterClamp: Steel, Zn platedTerminal: Brass, Tin platedScrew: M2.5, Steel, Zinc platedColors available: Green

Features:*Same side screw and wire entry.*Ideal for multi level PCB’s and front panel connections.*Captive screws*Single position modular pieces*2 pins per position for stability*Funnel shaped wire entry

Specifications:DT123RA Series

Same

side s

crew

and wi

re ent

ry

.250”

cente

rline

block

BlockMaster Electronics, Inc. (800)595-8881 www.blockmaster.com 18

EK950V Series EK381V4L Series9.5mm 3.81mm

ElectricalCurrent: 30A @ 300VWire range: 10 to 26 AWGPin dimension: 0.9mm x 0.5mmWirhstanding voltage:AC 2000V/minIR: >1000MΩ (500V DC)Operating temp: -40oC to +105oCStripping length: 6mmTorque: 7 lb-inPCB holes: min 1.2mmPCB thickness: max 3.8mm

MaterialsHousing: Polyamide 6,6Clamp: Steel, Zinc platedTerminal: Brass, Tin platedScrew: M3, Steel, Zinc platedColors available: Green

Dimensions

EuroPCB Terminal Blocks

n=number of polesL=(n-1) x 9.5

Features:*High power Euro PCB connector*Easy transition from barrier blocks to the European style with this 9.5mm (.375”) spaced block*Captive screws*Elevator style clamp*Testing holes*2 and 3 positions modular*Accepts #10 AWG

Specifications:EK950V

Ordering Information

30A 300V 10A 300V

Dimensions

n=number of polesL=(n-1) x 3.81

Ordering Information

ElectricalCurrent: 10A @ 300VWire range: 18 to 24 AWGPin dimension: 0.9mm x 0.55mmWithstanding voltage:AC 1500V/minIR: >500M Ω (500V DC)Operating temp: -40oC to +105oCStripping length: 4mmTorque: 2kg-cmPCB holes: min 1.1mmPCB thickness: max 2.4mm

MaterialsHousing: Polyamide 6,6Clamp: Steel, Zinc platedTerminal: Brass, Tin platedScrew: M2, Steel, Zinc platedColors available: Green

Features:*Small spacing and dual level style saves PCB real estate*EK381V4L is green color with clamp in the openposition*Captive screws*Testing points*Bottom level is modular with upper level*2 to 12 positions single mold, per level*Side stacking capability

Specifications EK381V4L Series

Miniatu

re

Dual T

ier

.375” ce

nterline

block

BlockMaster Electronics, Inc.(800)595-8881 www.blockmaster.com19

Pluggable Terminal Blocks CSF Plug5mm

Ordering Information

CSM Header5mm

Dimensions Dimensions

12A 300V 12A 300V

ElectricalCurrent: 12A @ 300VWire range: 14 to 30 AWGWire section(mm2): 0.05 to 1.5mm2

Pin diameter: φ1.3mmCR: 109 Ω (500V DC)Operating temp: -40oC to 110oCStripping length: 5mmTorque: 3.5 lb-inPCB holes: min 1.4mmPCB thickness: max 2.4mmClimactic category: 40/110/21 Acc. to IEC 68-1Insertion force: max 2 NDisconnecting force:min 1.2 N

MaterialsHousing: Polyamide 6,6 (UL94V-0)Clamp: Copper alloy, Ni platedSpring: Phosphorus bronze,Tin platedScrew: M3, copper alloy, Ni platedPin (header): Copper alloy,Tin platedColors available: Green is standard

Black is optional

MarkingNumbered marking strips 5mm centers.Numbered Order Number1-10 ESA1400011011-20 ESA1400112021-30 ESA1400213031-40 ESA1400314041-50 ESA14004150

Ink marking by factory (specify in order number):Factory ink is permanent and will not rub off. Inkhas fluorescent tint for greater visibility.0=no printingA=upside down printing (consecutive #’s R to L)B=regular printing (consecutive #’s L to R)

Custom markings are welcome with minimumorder. Contact factory for information.

Features:*CSF is supplied with clamp in the open position*Double captive screws*Elevator clamp system*2 to 25 positions single mold*Can also be side stackable*Vertical or right angle orientations*Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.*Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.*Minimum 5 microns of tin plating on terminal for easy soldering.

Specifications:CSF/CSM Series

Ordering Information

n=number of polesL=(n-1) x 5

n=number of polesL=(n-1) x 5

Also available in 10mm centers. Also available in 10mm centers.

Elevator Cla

mp

System

BlockMaster Electronics, Inc. (800)595-8881 www.blockmaster.com 20

Pluggable Terminal Blocks 332 Plug5mm

Ordering Information

299 Header5mm

Dimensions Dimensions

10A 250V 10A 250V

ElectricalCurrent: 10A @ 250VWire range: 14 to 22 AWGPin diameter: φ1.3mmCR: 5000MΩ(500V DC)Operating temp: -33oC to 120oCStripping length: 5mmTorque: 4.5 in-lbPCB holes: min 1.6mmPCB thickness: max 2.4mm

MaterialsHousing: Polyester(glass filled) UL94V-0Wire guard: Cu, BeMetal Housing: Copper, Tin platedScrew: M2.6, Steel, chromated and

galvanizedPin (header): Brass, Ni and Tin platedColors available: Black (standard), blue

MarkingConsult factory for marking options

Features:*Economical wire protector connector*2 and 3 positions modular*Vertical or right angle orientations*Black (standard) and blue colors*299 header-black only

Specifications:332/299 Series

Ordering Information

n=number of polesL=(n-1) x 5

n=number of polesL=(n-1) x 5

Also available in 10mm centers. Also available in 10mm centers.

Wire Protecto

r

Version

BlockMaster Electronics, Inc.(800)595-8881 www.blockmaster.com21

Pluggable Terminal Blocks CIF Plug5 and 5.08mm

Ordering Information

CIF Plug7.5 and 7.62mm

Dimensions

Dimensions

12A 300V 12A 300V

ElectricalCurrent(5/5.08): 12A @ 300VCurrent(7.5/7.62): 12A @ 300VWire range: 12 to 30 AWGWire section(mm2): 0.05 to 2.5mm2

CR: 109 Ω (500V DC)Operating temp: -40oC to 110oCStripping length: 6mmTorque: 3.5 in-lbPCB holes: N/APCB thickness: N/AClimactic category: 40/110/21 Acc. to IEC 68-1Insertion force: max 3 NDisconnecting force:min 1.5 N

MaterialsHousing: Polyamide 6,6 (UL94V-0)Clamp: Copper alloy, Ni platedSpring/leaf contact: Phosphorus bronze,Tin platedScrew: M3, copper alloy, Ni platedColors available: Green is standard

Black is optional

MarkingAdhesive marking strips 5 and 5.08mm centers.Numbered Order Number1-10 ESA1400011011-20 ESA1400112021-30 ESA1400213031-40 ESA1400314041-50 ESA14004150

Numbered marking strips 7.5 and 7.62mmcenters.Numbered Order Number1-10 ESA3400011011-20 ESA3400112021-30 ESA34002130

Ink marking by factory (specify in order number):Factory ink is permanent and will not rub off. Inkhas fluorescent tint for greater visibility.0=no printingA=upside down printing (consecutive #’s R to L)B=regular printing (consecutive #’s L to R)

Custom markings are welcome with minimumorder. Contact factory for information.

Features:*CIF is supplied with clamp in the open position*Double captive screws*2 to 25 positions single mold*Elevator clamp system*Use with CIM or CPM headers*Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens*Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product*Minimum 5 microns of tin plating on terminal for easy soldering

Specifications:CIF Series

Ordering Information

n=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing) n=number of poles

L=(n-1) x 7.5 (for 7.5mm spacing)L=(n-1) x 7.62 (for 7.62mm spacing)

Also available in 10mm and 10.16mm centers.

BlockMaster Electronics, Inc. (800)595-8881 www.blockmaster.com 22

Pluggable Terminal Blocks CVF Left Plug5 and 5.08mm

Ordering Information

CVF Right Plug5 and 5.08mm

Dimensions Dimensions

12A 300V 12A 300V

ElectricalCurrent: 12A @ 300VWire range: 12 to 30 AWGWire section(mm2): 0.05 to 2.5mm2

CR: 109 Ω (500V DC)Operating temp: -40oC to 110oCStripping length: 6mmTorque: 3.5 in-lbPCB holes: N/APCB thickness: N/AClimactic category: 40/110/21 Acc. to IEC 68-1Insertion force: max 3 NDisconnecting force:min 1.5 N

MaterialsHousing: Polyamide 6,6 (UL94V-0)Clamp: Copper alloy, Ni platedSpring/leaf contact: Phosphorus bronze,Tin platedScrew: M3, copper alloy, Ni platedColors available: Green is standard

Black is optional

MarkingNumbered marking strips 5 and 5.08mm centers.Numbered Order Number1-10 ESA1400011011-20 ESA1400112021-30 ESA1400213031-40 ESA1400314041-50 ESA14004150

Ink marking by factory (specify in order number):Factory ink is permanent and will not rub off. Inkhas fluorescent tint for greater visibility.0=no printingA=upside down printing (consecutive #’s R to L)B=regular printing (consecutive #’s L to R)

Custom markings are welcome with minimumorder. Contact factory for information.

Features:*CVF is supplied with clamp in the open position*Left and Right hand versions available*Double captive screws*Elevator clamp system*2 to 25 positions single mold*Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens*Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product*Minimum 5 microns of tin plating on terminal for easy soldering

Specifications:CVF Series

Ordering Information

n=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

n=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

Also available in 10mm and 10.16mm centers.Also available in 10mm and 10.16mm centers.

BlockMaster Electronics, Inc.(800)595-8881 www.blockmaster.com23

Pluggable Terminal Blocks CVF Left Plug7.5 and 7.62mm

Ordering Information

CVF Right Plug7.5 and 7.62mm

Dimensions Dimensions

12A 300V 12A 300V

ElectricalCurrent: 12A @ 300VWire range: 12 to 30 AWGWire section(mm2): 0.05 to 2.5mm2

CR: 109 Ω (500V DC)Operating temp: -40oC to 110oCStripping length: 6mmTorque: 3.5 lb-inPCB holes: N/APCB thickness: N/AClimactic category: 40/110/21 Acc. to IEC 68-1Insertion force: max 3 NDisconnecting force:min 1.5 N

MaterialsHousing: Polyamide 6,6 (UL94V-0)Clamp: Copper alloy, Ni platedSpring/leaf contact: Phosphorus bronze,Tin platedScrew: M3, copper alloy, Ni platedColors available: Green is standard

Black is optional

MarkingNumbered marking strips 7.5 and 7.62mmcenters.Numbered Order Number1-10 ESA3400011011-20 ESA3400112021-30 ESA34002130

Ink marking by factory (specify in order number):Factory ink is permanent and will not rub off. Inkhas fluorescent tint for greater visibility.0=no printingA=upside down printing (consecutive #’s R to L)B=regular printing (consecutive #’s L to R)

Custom markings are welcome with minimumorder. Contact factory for information.

Features:*CVF is supplied with clamp in the open position*Left and Right hand versions available*Double captive screws*Elevator clamp system*2 to 12 positions single mold*Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens*Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product*Minimum 5 microns of tin plating on terminal for easy soldering

Specifications:CVF Series

Ordering Information

n=number of polesL=(n-1) x 7.5 (for 7.5mm spacing)L=(n-1) x 7.62 (for 7.62mm spacing)

n=number of polesL=(n-1) x 7.5 (for 7.5mm spacing)L=(n-1) x 7.62 (for 7.62mm spacing)

Scalloped side in front Flat/keyed side in front

NEW

BlockMaster Electronics, Inc. (800)595-8881 www.blockmaster.com 24

Pluggable Terminal Blocks CIM Headers5 and 5.08mm

Ordering Information

CIM Headers7.5 and 7.62mm

Dimensions Dimensions

12A 300V 12A 300V

Vertical Vertical

Right Angle Right Angle

ElectricalCurrent(5/5.08): 12A @ 300VCurrent(7.5/7.62): 12A @ 300VPin dimension: 1mm x 1mmCR: 109 Ω (500V DC)Operating temp: -40oC to +110oCPCB holes: min 1.4mmPCB thickness: max 2.4mmClimactic category: 40/110/21 Acc. to IEC 68-1Insertion force: max 3 NDisconnecting force:min 1.5 N

MaterialsHousing: Polyamide 6,6 (UL94V-0)Terminal pin: Bronze,Tin platedColors available: Green is standard

Black is optional

MarkingConsult factory for marking options.

Features:*CIM headers for use with CIF and CVF plugs*2 to 25 positions single mold (5/5.08)*2 to 12 positions single mold (7.5/7.62)*4 Styles available (see chart)*Key coding capable*Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.*Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.*Minimum 5 microns of tin plating on terminal for easy soldering.

Specifications:CIM Series

Style Front Side

0P

0A

9P

9A

closed endright angle

closed endvertical

open endvertical

open endright angle

Style Front Side

0P

0A

9P

9A

closed endright angle

closed endvertical

open endvertical

open endright angle

5 and 5.08

7.5 and 7.62n=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

n=number of polesL=(n-1) x 7.5 (for 7.5mm spacing)L=(n-1) x 7.62 (for 7.62mm spacing)

Also available in 10mm and 10.16mm centers.

BlockMaster Electronics, Inc.(800)595-8881 www.blockmaster.com25

Pluggable Terminal Blocks CIM Ejector Headers5 and 5.08mm

Ordering Information

Dimensions

12A 300V

Vertical

Right Angle

Specifications:CIM-E Series

5 and 5.08

n=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

Also available in 10mm and 10.16mm centers.

ElectricalCurrent(5/5.08): 12A @ 300VPin dimension: 1mm x 1mmCR: 109 Ω (500V DC)Operating temp: -40oC to +110oCPCB holes: min 1.4mmPCB thickness: max 2.4mmClimactic category: 40/110/21 Acc. to IEC 68-1Insertion force: max 3 NDisconnecting force:min 1.5 N

MaterialsHousing: Polyamide 6,6 (UL94V-0)Terminal pin: Bronze,Tin platedColors available: Green is standard

Black is optional

MarkingConsult factory for marking options.

Features:*CIM Ejector headers for use with CIF and CVF plugs*The Ejector eases removal of longer position plugs or plugs in difficult to reach places*Safer than pulling directly on the plug*Operated by pressing both red Ejector levers simultaneously*2 to 21 positions single mold (5/5.08)*2 Styles available (see chart)*Key coding capable*Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens*Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product*Minimum 5 microns of tin plating on terminal for easy soldering

Style Front Side

0E

9Eejector endright angle

ejector endvertical

BlockMaster Electronics, Inc. (800)595-8881 www.blockmaster.com 26

Pluggable Terminal Blocks CPM Dual Tier Headers5 and 5.08mm

Ordering Information

CPM Dual Tier Headers5 and 5.08mm12A 300V 12A 300V

Specifications:CPM Series

n=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

n=number of polesL=(n-1) x 5 (for 5mm spacing)L=(n-1) x 5.08 (for 5.08mm spacing)

Also available in 10mm and 10.16mm centers. Also available in 10mm and 10.16mm centers.

ElectricalCurrent(5/5.08): 12A @ 300VPin dimension: 1mm x 1mmCR: 109 Ω (500V DC)Operating temp: -40oC to +110oCPCB holes: min 1.4mmPCB thickness: max 2.4mmClimactic category: 40/110/21 Acc. to IEC 68-1Insertion force: max 3 NDisconnecting force:min 1.5 N

MaterialsHousing: Polyamide 6,6 (UL94V-0)Terminal pin: Bronze,Tin platedColors available: Green is standard

Black is optional

MarkingConsult factory for marking options.

Features:*CPM headers for use with CIF and CVF plugs*Dual tier allows more contacts in smaller PCB space*Offset pins*2 to 25 positions single mold (5/5.08) for closed end*2 and 3 positions modular (5/5.08) for open end*4 Styles available (see chart)*Key coding capable*Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.*Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.*Minimum 5 microns of tin plating on terminal for easy soldering.

Vertical, open end modular

Right Angle, open end modular

Vertical, closed end

Right Angle, closed end

Dimensions Dimensions

Right Angle Vertical

Sty

le “0

M”

Sty

le “0

P”

Sty

le “9

M”

Sty

le “9

P”

BlockMaster Electronics, Inc.(800)595-8881 www.blockmaster.com27

Pluggable Terminal Blocks CTF Plug3.5 and 3.81mm

Ordering Information

CTF Plug w/Screw Flange3.5 and 3.81mm

Dimensions Dimensions

8A 250V 8A 250VSpecifications:CTF Series

Ordering Information

n=number of polesL=(n-1) x 3.81L=(n-1) x 3.5

n=number of polesL=(n-1) x 3.81L=(n-1) x 3.5

ElectricalCurrent(3.5/3.81): 8A @ 250VWire range: 14 to 30 AWGWire section(mm2): 0.05 to 2.5mm2

CR: 109 Ω (500V DC)Operating temp: -40oC to 110oCStripping length: 5mmTorque: 0.25NmPCB holes: N/APCB thickness: N/AClimactic category: 40/110/21 Acc. to IEC 68-1

MaterialsHousing: Polyamide 6,6 (UL94V-0)Clamp: Copper alloy, Ni platedSpring/leaf contact: Phosphorus bronze,Tin platedScrew: M2, copper alloy, Ni platedColors available: Green is standard

Black is optional

MarkingInk marking by factory (specify in order number):Factory ink is permanent and will not rub off. Inkhas fluorescent tint for greater visibility.0=no printingA=upside down printing (consecutive #’s R to L)B=regular printing (consecutive #’s L to R)

Custom markings are welcome with minimumorder. Contact factory for information.

Features:*CTF is supplied with clamp in the open position*Double captive screws*2 to 25 positions single mold*Elevator clamp system*Use with CTM headers*Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens*Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product*Minimum 5 microns of tin plating on terminal for easy soldering*3.5 or 3.81mm spacing*Locking screw flange available

Mini European PCB Terminal Blocks MSD Series 302/312 Series

Specifications: MSD Series 10A 150V 2.54 mm 7A 250V 3.50 mm Features: • Smallest Spacing Available • MSD is supplied with clamp in the open position • Double captive screws • Elevator clamp system • Testing points • 2 to 12 positions single mold • Housing is resistant to chlorinated solvents, with no

dioxin or detrimental to health halogens • Every position of this product is mechanically and

electrically tested during assembly to ensure a 100% defect free product

• Minimum 5 microns of tin plating on terminal for easy soldering

302 Series (vertical)

Electrical

Current: Wire Range: Wire Section: (mm²) Pin Dimension: CR: IR: Operating temp: Stripping Length: Torque: PCB Holes: PCB Thickness: Climatic Category:

10A @ 150V 16-30 AWG 0.05 to 1.3mm² 0.8mm x 0.4mm 10M� (500V DC) -40°C - +110°C 4mm 0.13 Nm min 1.1mm max 2.3mm 40/110/21 Acc. To IEC 68-1

Materials

Housing: Clamp: Terminal: Screw:

Polyamide 6,6 (UL 94V-O) Copper Alloy, NI plated Copper Alloy, Tin-plated M1.6, Copper Alloy, Ni plated

312 Series (right angle)

Marking Adhesive strips not available Ink marking by factory (specify in order number): Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility 0 = no printing A= upside down printing (consecutive #’s R to L) B= regular printing (consecutive #’s L to R)

Specifications: 301/312 Series

Features: • Small 3.5mm spacing • Modular design, black color • Economical wire protector termination

Electrical

Current: Wire Range: Pin Dimension: CR: IR: Operating Temp: Stripping Length: Torque: PCB holes

7A @ 250V 18 to 26 AWG 0.9mm 5000M� (500V DC) -55°C - +105°C 4.5mm 2.5 lb-in. min 1.2mm

Dimensions n = number of poles

L=(n-1) x 2.54

Dimensions n = number of poles

L=(n-1) x 3.5

Materials Ordering Information Ordering Information

Housing: Metal Housing: Wire Guard: Terminal: Screw:

Nylon FR15-UL94V0 Brass, Cu, tin plated Stainless steel Brass, Tin plated M2, steel, zinc plated, yellow chromated

BlockMaster Electronics, Inc. (800) 595-8881 www.blockmaster.com

MSD 0 4 -

Marking Blank = Green ON = Black

Poles

302 - 1 -

312 Poles

1002