Registration Form Sinhgad College of Engineering
Transcript of Registration Form Sinhgad College of Engineering
-
8/9/2019 Registration Form Sinhgad College of Engineering
1/2
Finite Element Analysis
Using
Sinhgad Technical Education Societys
SINHGAD COLLEGE OF ENGINEERING
Pune - 41
in Association with
Organizes
Venue
Seminar Hall
Department of Mechanical Engineering
SINHGAD COLLEGE OF ENGINEERING,
S.No. 44/1, Vadgaon (BK.), Pune -411 041
COURSE CONTENTS
Day 1
Day 2
Day 3
Altair Engineering India Pvt. Ltd
HyperWorks Suite of Solutions
&
DesginTech System Limited.
Training Program on
IntroductionGeometry CleanupElements (1D, 2D, 3D)Shell Mesh/2D Mesh2D Element quality Setup3D Tetra Mesh Setup3D Tetra Element quality Correction
3D Element Quality CorrectionFE-Model SetupOpen Q&A
Introduction & Process Steps ofPre/Post/Solving1D/2D Problem SetupSolving and Debugging a Static Problem2D/3D Problem SetupSolving and Debugging a Modal analysisProblemProblem Setup and Solving forLinear Static Analysis
Modal AnalysisPost processing and interpretation in HV foreach problem
IntroductionTheoretical BackgroundOptimization Interface and SetupConcept Design
Topology OptimizationExercise : Topology Optimization of aHook with Stress Constraints
Topography Optimization
Exercise : Topography Optimization ofL - bracketReviewFine Tuning DesignSize Optimization
Exercise:Size OptimisationShape Optimization
Exercise: Shape Optimization
Dulyfilledapplicationformsshouldbesentto
Prof.C.S.Pathak
ThreeDaysTrainingPro
gramon
FiniteElementAnalys
isusingHyperWorks
SuiteofSolutions
DepartmentofMechan
icalEngineering
SINHGADCOLLEGEO
FENGINEERING,
OffSinhgadRoad,Vadg
aon(BK)
Pune-411041
e-mail:cspathak.scoe@
sinhgad.edu
Ignited
Creations:9822472889,
9921047427
28-30 July, 2010
-
8/9/2019 Registration Form Sinhgad College of Engineering
2/2
:
REGISTRATION FORM(No registration fee)
1.Name :________________________
2.Qualification :________________________
3.Designation :________________________
4.Organization :
5.Experinece :_________________________
Industry _________________________
Teaching _________________________
Research __________________________
6.Address ________________________
__________________________
________________________
7.Phone :________________________
Office :________________________
Home :________________________
Mobile :________________________
8.E-mail :________________________
Signature of Applicant
This is to certify that Prof. / Mr. /Ms.
.................................................................... is anemployee of our institute and He / She will bepermitted to attend the program, if selected.
Date : Office Seal
Signature of the Sponsoring Authority
PATRONS
Prof. M. N. NavaleFounder President, Sinhgad Technical Education Society.
Dr. Mrs. S. M. NavaleFounder Secretary, Sinhgad Technical Education Society.
Mr. Pavan KumarManaging Director, Altair Engineering India Pvt. Ltd.
Managing Director, DesignTech Systems Ltd.
Mr. Vikas Khanvelkar
ORGANIZING COMMITTEE
________________________
About STES
Altair Engineering India Pvt. Ltd.
DesignTech Systems Ltd.
Teaching and learning got a far deeper meaning when the Sinhgad Technical Education
Society (STES) was set-up in August 1993. Prof.M.N. Navale, a great visionary and
dynamic leader, laid the foundation of the Society that went on to win the respect and
admiration of students as well as other Institutes. The high standard of education
imparted at the different Institutes under the aegis of STES in the fields of Engineering,
Management, Pharmacy, Architecture, Computer, Arts, Commerce and Science has
proved to be the lifeline for many successful careers. Sinhgad College Of Engineering
(SCOE) was established in the year 1996 at present offers under-graduate program in
Information Technology, Computer, Electronics & Telecommunication, Mechanical,
Chemical, Civil, P roduction, Bio-technology Engineering and Postgraduate programs in
Electronics & Telecommunication, Mechanical, IT, Civil, Computer and Chemical
Engineering. We are proud to state that ours is the youngest engineering institute in India
to start Ph.D program within 10 years from the establishment. All the above courses are
approved by All India Council of Technical Education (AICTE), accredited by National
Board of Accreditation (NBA), New Delhi and affiliated to University of Pune. The
Directorate of Technical Education (DTE), Maharashtra State, Mumbai has awarded A
garde to the college.
Altair empowers client innovation and decision-making through technology that
optimizes the analysis, management and visualization of business and engineering
information.
Altair Engineering's HyperWorks is a computer-aided engineering (CAE) simulation
software platform that allows businesses to create superior, market-leading products
efficiently and cost effectively.
DesignTech Systems Ltd. began their unceasing quest for perfection in the area of
developing and applying latest IT technologies in 1998. Today, DesignTech has won
enough attention to give growth a good name.
DesignTech Systems Ltd. is one of the largest CAD, CAM, CAE, PLM Solutions &
Engineering Services Provider in the Country with wide portfolio to address the most
specific and complex engineering requirements. DesignTech cater more than 1800 +
Customers in various Industry Segments including Defense, Aerospace, Automotive,
Heavy Machinery, Electromechanical, Tooling, Consumer Durables etc.
DesignTech is the Exclusive Business Partner for Altair Engineering (for CAE Solutions) in
India. In Association with Altair Engineering & renowned educational Institutes in India,
DesignTech has established many competency development centers in the country. With
the help of such combined initiatives from DesignTech & Altair Engineering, many
students have groomed to match the industry requirements & survive in the global
competition.
CO-ORDINATORS
PROGRAM CHAIR
Dr. A. S. PadalkarPrincipal, Sinhgad College of Engineering.
Dr. H. V. Vankudre, Chairman
Prof. C. S. Pathak, Secretary
Prof. S. Y. Gajjal
Prof. A. P. Tadamalle
Prof. Sateesh Patil
Mr. Manoj Dixit
Mr. Yogesh Bochare
Altair Engineering India Pvt. Ltd.
DesignTech Systems Ltd.